[Q] can`t connect usb when in download mode - Galaxy Note 3 Q&A, Help & Troubleshooting

hello...i have brand new note 3 sm n9005.... and i tried do root it ...but
i cant even start rooting process because , when i am in download mode and when i plug my usb in my pc,
there is message that device driver isnt installed successfully and maybe will not work properly....
And that is strange, becouse, when my note 3 is in normal factory mode, usb work normaly..
i did install Kies3 and all is ok .....also i saw that udc start is in red color..android version is 4.2.2
can you gimme your opinion why i cant connect usb when i am in download mode....thanks

xxxzoranxxx said:
hello...i have brand new note 3 sm n9005.... and i tried do root it ...but
i cant even start rooting process because , when i am in download mode and when i plug my usb in my pc,
there is message that device driver isnt installed successfully and maybe will not work properly....
And that is strange, becouse, when my note 3 is in normal factory mode, usb work normaly..
i did install Kies3 and all is ok .....also i saw that udc start is in red color..android version is 4.2.2
can you gimme your opinion why i cant connect usb when i am in download mode....thanks
Click to expand...
Click to collapse
did u goto settings, about, then click on build number about 7 or 8 times, to enable developer options, then check usb debugging,

Related

[Q] Odin can't detect download mode.

So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me

[Q] cant connect usb in download mode

hello...i have brand new note 3 sm n9005.... and i tried do root it ...but
i cant even start rooting process because , when i am in download mode and when i plug my usb in my pc,
there is message that device driver isnt installed successfully and maybe will not work properly....
And that is strange, becouse, when my note 3 is in normal factory mode, usb work normaly..
i did install Kies3 and all is ok .....also i saw that udc start is in red color..android version is 4.2.2
can you gimme your opinion why i cant connect usb when i am in download mode....thanks
SOLVED.....
the airplane mode was on.....its rooted now
thanks for afford ricardo 2256....for some reason i was not allowed to reply to you so this is the only way
xxxzoranxxx said:
hello...i have brand new note 3 sm n9005.... and i tried do root it ...but
i cant even start rooting process because , when i am in download mode and when i plug my usb in my pc,
there is message that device driver isnt installed successfully and maybe will not work properly....
And that is strange, becouse, when my note 3 is in normal factory mode, usb work normaly..
i did install Kies3 and all is ok .....also i saw that udc start is in red color..android version is 4.2.2
can you gimme your opinion why i cant connect usb when i am in download mode....thanks
Click to expand...
Click to collapse
The red thing is ok. Install Samsung USB Drivers for Windows that you can download at http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
If that does not fix the problem, you should consider buy a new cable. As I did and worked

samsung galaxy s4 at&t SGH-I337 is not recognized by pc

hey,everybody .
this is my first post here , so please excuse my ignorance .
s4 att , android 4.2.2 , baseband i337UCUAMF3 , KERNEL 3.4.0-812098 , BUILD # JDQ39.I337UCUAMF3
When connected to pc , it starts charging , put pc does not see it .
tried 10 different usb cables ( including samsung original ) , tried dial *#0808# made sure it shows mtp+adb
tried 4 different computers from windows xp . up to windows 10 , kies does not see it , odin does not see it , pc does not see it .
i put it in download mode , no change .
updated windows media player , installed google sdk , nothing !
reset to factory , several times , did it from the phone menu , and from recovery , nothing !
i put 4.2.2 on a micro sd card , went into recovery , apply update from external i get error (error in tmp/sideload/package.zip status 7 )!!!!
does not connect via adb either !!!
PLEASE HELP !!!!
You did not mention the samsung kies, smart switch in your post. Usually I use those software to check whether my pc has samsung usb driver properly installed.
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
mhk9626 said:
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
Click to expand...
Click to collapse
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
sway8966 said:
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
Click to expand...
Click to collapse
tried smart switch too , nothing !!!
Sounds like the USB port of flex cable may be damaged.
audit13 said:
Sounds like the USB port of flex cable may be damaged.
Click to expand...
Click to collapse
you were the only one who tried to help . so , many thanks !!
No worries, we're here to help and learn from each other. Did you have an opportunity to try any other possible solutions? Do you have access to another flex cable?

usb connection problem

hello
few day ago i lost the root
when i try to connect the phone to the pc it appears a message on pc that say it cant connect
unrecognized devices
i try 3 different pc and OS
2 different cable but nothing
installed samsung switch and separately few times usb driver
i cant see it in mtp o download mode
i cant connect with odin
nothing nothing
i cant change mtp mode with other
i wiped many times the phone
in stock recovery and in android setting
now SE status is SEPF_SECMOBILE_6.0.1_0011
anyone can help me ?
ive got stock rom
no one ?

Please anyone help me... I tried alot

Somedays ago, i rooted my samsung galaxy s6 edge plus (sm-g928f). I was checking the settings and by mistake i have turned off the developer mode in settings and when i restarted mobile it is showing frp lock neither i can turn on mobile nor i can go to recovery... There is only one option for flashing firmware through download mode from odin but my mobile doesn't connects to any pc and laptop, I have checked with diffrent cables in different computers with all samsung drivers installed.
so, please tell me the solution. I can only charge the mobile now. I cant turn on mobile and recovery because of frp lock and neither connect through download mode as usb not detecting at all..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
Please Develeopers and experts please give me the solution for this problem.
Use ODIN to flash stock firm for your device - go to download mode and flash.
avenge said:
Use ODIN to flash stock firm for your device - go to download mode and flash.
Click to expand...
Click to collapse
As I already mentioned,I cannot connect mobile to PC through usb,it's download mode is not detecting in any PC in odin even all samsung drivers installed.
What USB drivers did you install?
Try removing the ones you have installed and then booting into download mode and letting windows get them automatically. I haven't installed any drivers for my phone, I plug in the USB and Windows detects and downloads them.... I'm on windows 10.

Categories

Resources