Database Users

[Guide][ROM][UPDATE]Running N8010XXUDNE4 on GT-N8013 - Galaxy Note 10.1 General

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Always do a backup!!​For GT-N8013 Tablets​
N8010XXUDNE4!! /N8013/ GT-N8010 WiFi Only ROM​Download>>> N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.zip
Download>>> UPDATE-SuperSU-v2.01.zip for Root
Installing ROM
Requires a Factory Reset (Wipe) Thanks to @pre4speed
1. Unzip N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.zip
2. Install N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5 with included Odin 3.07
3. Skip through setup (WiFi won't work Yet)
4. Get back in download mod, and install philz_touch_6.41.6-n8013.tar.md5 ,openrecovery-twrp-2.7.1.0-gt-n8000.tar or N8013-CWM-Touch-6.0.3.6.tar.md5 (Your Choice)
5. Copy GT-N8013-KK-WiFi-Fix.zip, Stock-GT-N8000-leaked-KK-Boot.img-CWR-installer.zip and UPDATE-SuperSU-v2.01.zip to your sdcard
6. Reboot phone into recovery( Hold [power][volume-up] button until in recovery) Install Stock-GT-N8000-leaked-KK-Boot.img-CWR-installer.zip,GT-N8013-KK-WiFi-Fix.zip to fix WiFi
7. Install UPDATE-SuperSU-v2.01.zip to get root Thanks to @pre4speed
8. Reboot and you should have Wifi
9. Recommend doing a backup after you complete setting up your phone, before applying any add-ons
Files In download zip
**********************************************************************************************************************************************************************************************************************
N8000XXUDNE4!! /N8013/ GT-N8010 NON WiFi ROM​This is NON Wifi Tablet N8000 ROM
WARNING!! N8000/N8010/N8012 this Contains the GT-N8013 Bootloader​Download>>> N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.zip
Mega Link >>> N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.zip
Contains all files needed for GT-N8013
GT-N8013-KK-WiFi-Fix.zip........................................... .......................WiFi Work Around Fix.. Install this last after installing root
N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.md5................................Offic ial KK Firmware with Leaked Boot.img and JB bootloader files
N8013.pit .................................................. .....................................Only need if you want to reformat phone
Odin307.zip....................................... ...............................................Odi n
Recovery's You choose the one you want, Install with Odin
N8013-CWM-Touch-6.0.3.6.tar.md5................................... ..................CWM Recovery
openrecovery-twrp-2.7.0.0-gt-n8013.tar......................................... .....TWRP Recovery
philz_touch_6.41.6-n8013.tar.md5..................................... ...................Philz CWM touch recovery with eztra stuff
SystemUI_Remove_Signal_Icons_Official_KK_CWR_insta ller.zip...................Removes No Signal Circle from task bar
UPDATE-SuperSU-v1.94.zip......................................... ........................Used to Root and Give Root access to files
WiFi_Only_Remove_Phone_Service_N8013_Custom_Recovery_Installer.zip.... Removes phone apps...suppose to save battery from tablet not searching for towers Use Updated attached below
********************************************************************************************************************************************************************************************************
Running N8000XXUDNE4 on GT-N8013​Only tested on GT-N8013 Tablet​
Unzip N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.zip with 7-zip
Install with Odin and Skip through the settings then boot back to Download mode and install:
Install Custom Recovery
I used philz_touch_6.41.6-n8013.tar.md5
Install with Recovery UPDATE-SuperSU-v1.94.zip to get Root
SuperSU Home Page
ROOT GUIDE OFFICIAL STOCKROM N8000XXUDNE4 KitKat (4.4.2)
Install this for wifi fix
GT-N8013-KK-WiFi-Fix.zip
Removing Data Signal From Task Bar
SystemUI_Remove_Signal_Icons_Official_KK_CWR_installer.zip
Only removes No Data (Circle Icon)
Manually Unpacking Official Firmware
Download For Official KitKat Firmware
N8000XXUDNE4_N8000OXADNE4_DBT
Unzip N8000XXUDNE4_N8000OXADNE4_DBT.zip with 7-zip
Unzip N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5
Remove modem.bin,sboot.bin, boot.img and tz.img,
Use Boot.img from Leaked KK
I Used TAR_MD5_PACKAGER to repack the rest of the files and the leaked KK boot.img
Fix Screen Mirroring KitKat official 4.4.2 GT-N8013 by vickoc
Removing Phone Service
Phone apps removed should fix battery drain issue ( phone searching for towers)
SecPhone.apk ( Removes Cell Search Activity)
SecPhone.odex ( Removes Cell Search Activity)
SecMms_Tablet_Upgrade.apk
SecMms_Tablet_Upgrade.odex
SecTelephonyProvider.apk
SecTelephonyProvider.odex
Stk.apk
Stk.odex
Stop cell tower search battery usage
Install with Your Custom Recovery
WiFi_Only_Remove_Phone_Service_N8013_Custom_Recovery_Installer.zip
You can use Disable Application to disable (Freeze)any apps temporary not wanted to see in app Drawer
You can also use ADB to disable (Freeze)any other apps temporary not wanted to see in app Drawer
Code:
C:\Users\carl>adb shell
[email protected]:/ $ su
su
[email protected]:/ # pm list packages
pm list packages
package:com.sec.android.app.ringtoneBR
package:com.sec.android.app.phoneutil
package:com.android.defcontainer
package:com.samsung.android.scloud.quota
package:com.sec.android.gallery3d
package:com.android.phone
package:com.sec.android.fotaclient
package:com.sec.android.motions.settings.panningtutorial
package:com.fmm.dm
package:android.googleSearch.googleSearchWidget
package:com.sec.android.app.bluetoothtest
package:com.android.bluetooth
package:com.android.providers.calendar
package:com.vlingo.midas
package:com.sec.android.widgetapp.notificationwidget
package:com.sec.factory
package:com.samsung.android.app.divx
package:com.samsung.android.scloud.sync
package:com.android.browser
package:com.sec.android.allshare.service.fileshare
package:com.samsung.pickuptutorial
package:com.sec.android.app.snotebook
package:com.smartapp.appfreezer
package:com.android.providers.downloads.ui
package:com.gd.mobicore.pa
package:com.android.documentsui
package:com.android.vpndialogs
package:com.peel.app
package:com.android.providers.media
package:com.sec.android.widgetapp.at.yahoostock.stockclock
package:com.sec.android.app.lcdtest
package:com.sec.android.nearby.mediaserver
package:com.sec.android.widgetapp.analogclocksimple
package:com.siso.app.generic
package:com.sec.android.cloudagent
package:com.google.android.setupwizard
package:com.samsung.sec.sketch
package:com.sec.android.widgetapp.favoriteswidget
package:com.monotype.android.font.samsungsans
package:com.hu1.wallpaper.aurora2
package:com.android.settings
package:com.sec.android.service.cm
package:com.sec.pcw
package:com.google.android.street
package:air.com.adobe.pstouch.oem1
package:com.sec.android.widgetapp.webmanual
package:com.google.android.googlequicksearchbox
package:mobi.xperiacle.mwappsmanager
package:com.android.exchange
package:com.sec.app.samsungprintservice
package:com.sec.android.providers.tasks
package:com.google.android.backuptransport
package:com.sec.android.gesturepad
package:com.samsung.groupcast
package:com.sec.allsharecastplayer
package:com.wssyncmldm
package:com.google.android.apps.maps
package:com.android.wallpapercropper
package:com.sec.android.app.FileShareClient
package:com.android.providers.settings
package:com.sec.msc.learninghub
package:com.sec.android.app.mobileprint
package:com.sec.android.provider.snote
package:com.google.android.apps.docs
package:com.android.providers.downloads
package:com.smlds
package:net.woostudio.sqliteeditor
package:com.android.phasebeam
package:com.sec.android.fwupgrade
package:com.sec.android.app.wallpaperchooser
package:com.tgrape.android.radar
package:com.sec.android.widgetapp.at.hero.accuweather
package:com.google.android.videos
package:com.sec.bcservice
package:com.monotype.android.font.cooljazz
package:com.sec.android.app.popupuireceiver
package:com.android.inputdevices
package:com.orange.authentication.simcard.permission
package:com.sec.android.provider.logsprovider
package:com.sec.android.app.popupcalculator
package:com.google.android.configupdater
package:com.sec.enterprise.mdm.vpn
package:com.sec.android.app.FileShareServer
package:com.samsung.topicwall
package:com.sec.android.app.sysscope
package:com.samsung.music
package:com.sec.android.band
package:com.sec.android.app.samsungapps
package:android
package:com.android.providers.contacts
package:com.acrodea.crayonphysics
package:com.sec.android.app.servicemodeapp
package:com.epson.mobilephone.samsungprintservice
package:com.google.android.apps.uploader
package:com.android.externalstorage
package:com.sec.android.widgetapp.SPlannerAppWidget
package:com.android.providers.applications
package:com.samsung.android.sdk.spenv10
package:com.samsung.android.scloud.proxy.contacts
package:com.siriusapplications.quickboot
package:com.google.android.apps.plus
package:com.android.vending
package:com.sec.android.app.mt
package:com.sec.android.providers.downloads
package:com.sec.android.drmpopup
package:com.android.keychain
package:com.sec.android.widgetapp.at.hero.accuweather.widget
package:eu.chainfire.supersu
package:com.sec.android.mmapp
package:com.google.android.apps.magazines
package:com.wsomacp
package:com.samsung.klmsagent
package:com.sec.android.app.music
package:com.sec.android.app.minimode.res
package:com.google.android.gsf
package:com.android.keyguard
package:com.sec.android.widgetapp.ap.yahoonews
package:com.monotype.android.font.chococooky
package:com.android.shell
package:com.sec.usbsettings
package:com.google.android.syncadapters.contacts
package:com.fixmo.isa
package:com.samsung.scrc.idi.server
package:com.sec.phone
package:com.sec.android.app.wfdbroker
package:com.fmm.ds
package:com.android.providers.partnerbookmarks
package:com.android.contacts
package:com.sec.android.app.gamehub
package:com.samsung.everglades.video
package:com.siso.photoWall
package:com.android.htmlviewer
package:com.dama.paperartist
package:com.sec.android.app.parser
package:com.google.android.gsf.login
package:com.sec.android.inputmethod
package:com.sec.android.daemonapp.ap.accuweather
package:com.sec.android.directconnect
package:com.sec.android.widgetapp.dualclockanalog
package:com.android.calendar
package:com.sec.android.daemonapp.ap.yahoostock.stockclock
package:com.sec.android.provider.badge
package:com.samsung.SMT
package:com.sec.android.app.selftestmode
package:com.sec.android.app.factorymode
package:com.samsung.android.scloud.backup
package:com.android.sharedstoragebackup
package:com.adobe.air
package:com.sec.android.allshare.service.controlshare
package:com.google.android.marvin.talkback
package:com.android.certinstaller
package:com.siso.app.genericprintservice
package:com.monotype.android.font.rosemary
package:com.sec.spp.push
package:com.google.android.gms
package:com.sec.android.app.launcher
package:com.samsung.shareshot
package:com.android.dreams.phototable
package:com.sec.android.app.worldclock
package:com.sec.android.allshare.service.mediashare
package:org.simalliance.openmobileapi.service
package:com.dropbox.android
package:com.sec.enterprise.knox.attestation
package:air.SQLEditor
package:com.sec.android.app.SecSetupWizard
package:com.hp.android.printservice
package:com.sec.enterprise.mdm.services.simpin
package:com.sec.spen.flashannotate
package:com.sec.android.SamsungDrmProvider
package:com.sec.android.app.sns3
package:com.sec.android.providers.security
package:com.google.android.music
package:com.visionobjects.resourcemanager
package:com.android.wallpaper.livepicker
package:com.sec.android.directshare
package:com.sec.automation
package:com.diotek.mini_penmemo
package:com.android.packageinstaller
package:com.sec.app.RilErrorNotifier
package:com.sec.pcw.device
package:com.samsung.helphub
package:com.sec.android.app.wlantest
package:com.android.noisefield
package:com.android.email
package:com.sec.spen.flashannotatesvc
package:com.sec.android.app.FlashBarService
package:com.android.location.fused
package:com.android.backupconfirm
package:com.sec.android.widgetapp.programmonitorwidget
package:com.wssnps
package:com.android.musicfx
package:com.google.android.apps.books
package:com.sec.android.daemonapp.ap.yahoonews
package:com.android.soundrecorder
package:com.samsung.clipboardsaveservice
package:com.lifevibes.trimapp
package:com.sec.android.app.SPenKeeper
package:com.google.android.partnersetup
package:com.sec.tcpdumpservice
package:com.sec.android.app.GlanceView
package:com.android.proxyhandler
package:com.sec.msc.nts.android.proxy
package:com.sec.android.app.ve
package:com.sec.android.app.camera
package:com.sec.android.preloadinstaller
package:com.google.android.feedback
package:com.sec.dsm.phone
package:com.sec.phone.fake
package:com.sec.android.app.keyguard
package:com.google.android.talk
package:com.samsung.android.scloud.proxy.snote
package:com.sec.smartcard.manager
package:com.sec.android.app.myfiles
package:com.sec.chaton
package:com.android.providers.userdictionary
package:com.samsung.android.scloud.proxy.calendar
package:com.samsung.android.providers.context
package:com.sec.android.widgetapp.digitalclock
package:com.osp.app.signin
package:com.sec.android.Preconfig
package:com.android.pacprocessor
package:com.sec.android.cloudagent.dropboxoobe
package:com.samsung.android.scloud.auth
package:com.samsung.videohub
package:com.samsung.android.mdm
package:com.sec.android.app.mediasync
package:com.sec.android.app.controlpanel
package:com.android.printspooler
package:com.google.android.syncadapters.calendar
package:com.LocalFota
package:com.samsung.android.scloud.proxy.browser
package:com.samsung.android.MtpApplication
package:com.android.dreams.basic
package:com.google.android.play.games
package:com.sec.android.app.clockpackage
package:com.sec.android.app.personalization
package:com.android.systemui
package:com.samsung.sec.android.application.csc
package:com.infraware.polarisoffice5tablet
package:com.samsung.android.livewallpaper.deepsea
package:com.sec.android.app.videoplayer
package:com.sec.android.app.DataCreate
package:com.sec.android.app.SuggestionService
package:com.speedsoftware.sqleditor
package:com.google.android.gm
package:com.sec.android.widgetapp.dualclockdigital
package:com.estrongs.android.pop
package:com.samsung.android.livewallpaper.luminousdots
package:com.henry.sqliteqa_litte
package:com.android.chrome
package:com.sec.android.Kies
package:com.sec.dsm.system
package:com.sec.knox.seandroid
package:com.sec.android.contextaware
package:com.sec.esdk.elm
[email protected]:/ # pm disable com.android.phone
pm disable com.android.phone
Package com.android.phone new state: disabled
[email protected]:/ #
Install Attached SecPhone.apk_Official_KK_CWR_installer.zip if you want phone app back

Failed on my N8010.
Checked GT-N8013-KK-WiFi-Fix.zip and cannot understand how it worked. What's the function of the files which are put into /data?
And if this doesn't work on N8010, is there another way I can try?

This worked for me
Smart-X said:
Failed on my N8010.
Checked GT-N8013-KK-WiFi-Fix.zip and cannot understand how it worked. What's the function of the files which are put into /data?
And if this doesn't work on N8010, is there another way I can try?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showpost.php?p=53065121&postcount=77 (just ignore the Tip)
I tried in on a N8010 and this worked for me, but I think it's essentially the same. I assume the only difference is that the boot.img from the leaked ROM is inlcuded in the tar in this guide and not in a flashable zip as in the guide from the other thread.
Also did you check, if one of your files was corrupted. If so, just redownload and retry

Smart-X said:
Failed on my N8010.
Checked GT-N8013-KK-WiFi-Fix.zip and cannot understand how it worked. What's the function of the files which are put into /data?
And if this doesn't work on N8010, is there another way I can try?
Click to expand...
Click to collapse
The /data files some how fix the IP address issue.
Did you root your phone yet? it may have to be rooted to copy to your userdata partition
When you install the ROM did you have to set it up? If you did not then you did not install on a clean system and that may cause issues.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Yes I Wiped almost everything before installing the ROM.
And yes I had to set it up at the first boot after installation.
And yes I root my phone with SuperSU 1.99r3.
So those files fix the IP address issue.
Can they be used on N8010 too?
Anyway I'll try it again later.

Smart-X said:
Yes I Wiped almost everything before installing the ROM.
And yes I had to set it up at the first boot after installation.
And yes I root my phone with SuperSU 1.99r3.
So those files fix the IP address issue.
Can they be used on N8010 too?
Anyway I'll try it again later.
Click to expand...
Click to collapse
did you install the leaked boot.img? I had to install it to get wifi going, it would not work with the Official KK boot.img
I do not know about 8010, sorry

carl1961 said:
did you install the leaked boot.img? I had to install it to get wifi going, it would not work with the Official KK boot.img
I do not know about 8010, sorry
Click to expand...
Click to collapse
I failed yesterday with installing both the leaked boot.img and GT-N8013-KK-WiFi-Fix.zip.
I'll try the whole installation again When I got my N8010 later today.
Thanks for your answers.

Just installed and it works great! Now I don't have to wait!

Update OP
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Please simplify post.
First, Thank you so much. In the words of the song Thrift Shop "This is freakin awsome!"
There is a lot of stuff going on in the OP. I haven't flashed in a while so I am rusty. This is what I am seeing:
Mega Link has all of the files that I need.
Install ROM using Odin (skip through settings and boot back to Download mode)
Use Odin to install Custom Recovery
Use recovery to install wifi fix, wifi only remove phone service and systemUI remove system icons
Finish.
What about the other files in zip? Do i need them? (N8013 pit), (CWM Touch), (Open Recovery)
Can I use Mobile Odin?
I just want to get it right before I flash this awesomeness.

carl1961 said:
Install with Odin and Skip through the settings then boot back to Download mode and install:
Click to expand...
Click to collapse
I'm not very familiar with using odin. Which files are we putting into odin and where do I put them in? Also, is the PIT file required?

TimDotThomas said:
First, Thank you so much. In the words of the song Thrift Shop "This is freakin awsome!"
There is a lot of stuff going on in the OP. I haven't flashed in a while so I am rusty. This is what I am seeing:
Mega Link has all of the files that I need.
Install ROM using Odin (skip through settings and boot back to Download mode)
Use Odin to install Custom Recovery
Use recovery to install wifi fix, wifi only remove phone service and systemUI remove system icons
Finish.
What about the other files in zip? Do i need them? (N8013 pit), (CWM Touch), (Open Recovery)
Can I use Mobile Odin?
I just want to get it right before I flash this awesomeness.
Click to expand...
Click to collapse
GT-N8013-KK-WiFi-Fix.zip..................................................................WiFi Work Around Fix.. Install this last after installing root
N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.md5................................Official KK Firmware with Leaked Boot.img and JB bootloader files
N8013.pit .......................................................................................Only need if you want to reformat phone
Odin307.zip......................................................................................Odin
Recovery's You choose the one you want, Install with Odin
N8013-CWM-Touch-6.0.3.6.tar.md5.....................................................CWM Recovery
openrecovery-twrp-2.7.0.0-gt-n8013.tar..............................................TWRP Recovery
philz_touch_6.41.6-n8013.tar.md5........................................................Philz CWM touch recovery with eztra stuff
SystemUI_Remove_Signal_Icons_Official_KK_CWR_installer.zip...................Removes No Signal Circle from task bar
UPDATE-SuperSU-v1.94.zip.................................................................Used to Root and Give Root access to files
WiFi_Only_Remove_Phone_Service_N8013_Custom_Recovery_Installer.zip.... Removes phone apps...suppost to save battery from tablet not searching for towers

link6155 said:
I'm not very familiar with using odin. Which files are we putting into odin and where do I put them in? Also, is the PIT file required?
Click to expand...
Click to collapse
N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.md5 Install this with Odin, Click on (PDA) and select file to install, All install here
N8013.pit Only need if you want to reformat phone
Install Recovery with Odin ( Only need one of these)
N8013-CWM-Touch-6.0.3.6.tar.md5
openrecovery-twrp-2.7.0.0-gt-n8013.tar
philz_touch_6.41.6-n8013.tar.md5
All these you copy to SD card and install with Recovery
SystemUI_Remove_Signal_Icons_Official_KK_CWR_installer.zip
UPDATE-SuperSU-v1.94.zip
WiFi_Only_Remove_Phone_Service_N8013_Custom_Recovery_Installer.zip

carl1961 said:
N8000XXUDNE4_N8000OXADNE4_GT-N8013.tar.md5 Install this with Odin, Click on (PDA) and select file to install, All install here
N8013.pit Only need if you want to reformat phone
Install Recovery with Odin ( Only need one of these)
N8013-CWM-Touch-6.0.3.6.tar.md5
openrecovery-twrp-2.7.0.0-gt-n8013.tar
philz_touch_6.41.6-n8013.tar.md5
All these you copy to SD card and install with Recovery
SystemUI_Remove_Signal_Icons_Official_KK_CWR_installer.zip
UPDATE-SuperSU-v1.94.zip
WiFi_Only_Remove_Phone_Service_N8013_Custom_Recovery_Installer.zip
Click to expand...
Click to collapse
Install (recovery) one at a time starting with SuperSu or can this recovery do multiple flashes?

TimDotThomas said:
Install (recovery) one at a time starting with SuperSu or can this recovery do multiple flashes?
Click to expand...
Click to collapse
I would install one at a time say root then what ever other's, and then I would do a reboot then install wifi fix last after a reboot with root working

Cool. Now in my haste I did not click re-partition. Is that a problem? Should I reflash?
Sent from my Nexus 5 using XDA Free mobile app

TimDotThomas said:
Cool. Now in my haste I did not click re-partition. Is that a problem? Should I reflash?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
no you do not check that
if you install the pit file it will auto check

Working on my N8013
Just installed this and it's working fine for the most part

Warning
I decided to do a factory reset. BIG MISTAKE! I think I bricked my device. It is force closing in another language. When I flash the ROM again, it still does not work. It is getting late. Tomorrow I will flash stock ROM and then reflash this new one. Hope that works. Any suggestions?

TimDotThomas said:
I decided to do a factory reset. BIG MISTAKE! I think I bricked my device. It is force closing in another language. When I flash the ROM again, it still does not work. It is getting late. Tomorrow I will flash stock ROM and then reflash this new one. Hope that works. Any suggestions?
Click to expand...
Click to collapse
Before installing do a factory reset then use the pit file with install, repatriation should be checked like picture on op.
Sent from my GT-N8000 using XDA Premium 4 mobile app

Related

I'm trying manually install 4.1.2 on my rooted Nexus 7 with CMW.
I downloaded the zip, placed it on my Nexus 7, proceeded regularly to install zip
i selected the zip and it aborted, says Status 7.
Thanks to the community below are solutions to get the update to flash.
EDIT
Thanks to Logic_
You can flash this .zip instead which disables all the checks but do it at your own risk as it can brick your tablet
https://www.dropbox.com/s/isqpvb0w26....1.2edited.zip
This is the update with the checks disabled. I didn't make this, got it off another forum, I just used it because I had moved an update to chrome into my /system and there was no easy way to revert it.
I wouldn't advise using this if you made build.prop modifications, but it is useful if your update is failing over some apps like google wallet.
Once again, I didn't make this and I'm not responsible if you for some reason use this to flash the update over some heavily modded rom
It's from JRO03D btw.
Click to expand...
Click to collapse
EDIT 2
osm0sis method to get the update to work is simpler and possibly risk free.
osm0sis said:
For those who've done some modding and can't remember what they did to pass the OTA asserts, all you need to do is dirty flash the system.img from 4.1.2 factory image in fastboot and eveything should work.
Click to expand...
Click to collapse

Did you try to redownload the zip?
Sent from my Nexus 7 using xda app-developers app

I got a similar error for build.prop file. I had changed it to enable/force auto rotation of the home screen when I was on 4.1.1. When I reverted the build.prop to its original file, it worked for me.
I see the error code is the same in your case as well. Is there a chance that you would have changed BrowserProviderProxy.apk?

mayoor_rao said:
I got a similar error for build.prop file. I had changed it to enable/force auto rotation of the home screen when I was on 4.1.1. When I reverted the build.prop to its original file, it worked for me.
I see the error code is the same in your case as well. Is there a chance that you would have changed BrowserProviderProxy.apk?
Click to expand...
Click to collapse
I didn't edit it which is weird, I don't think this matters but I did sideload aosp browser as I'm not a fan of chrome
Sent from my Nexus 7 using Tapatalk 2

Sebianoti said:
I didn't edit it which is weird, I don't think this matters but I did sideload aosp browser as I'm not a fan of chrome
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
It's from the side loading of the browser. I had this too. You have to restore those mentioned browser proxy file(s) to their original state. I also temporarily removed the browser apk from the system/app folder as well, although I'm not sure if this was required. The update installed fine after doing this.
Sent from my Nexus 7 using XDA Premium HD app

nyijedi said:
It's from the side loading of the browser. I had this too. You have to restore those mentioned browser proxy file(s) to their original state. I also temporarily removed the browser apk from the system/app folder as well, although I'm not sure if this was required. The update installed fine after doing this.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Oh okay, how would I restore those files to their original state though?
Sent from my Nexus 7 using Tapatalk 2

I'm having the same problem. I cannot seem to flash the update with CWM. I haven't edited any of the system files or anything like that. Is it the fact that I'm using a different launcher that's causing the problem?

Sebianoti said:
Oh okay, how would I restore those files to their original state though?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I'd like to know too. I get the Build.prop error too.

You've made no changes whatsoever? What about the kernel? Worst case just use mskip's toolkit to flash back to stock 4.1.1. Check the lag thread I posted what I did and it worked like butter.
Sent from my Nexus 7 using xda premium

Hi all.....
I'm currently using stock Nexus 7 and did all ways possible here to update and nothing worked, last thing I did was go to setting, backup and restore and hit factory data reset and buala automatically got the update to 4.1.2
Nota: this is not a recommendation but if u wanna try do a Backup and good luck.
Sent from my Nexus 7 using xda premium

I deleted the original browser files in the system/app folder too.
Found them on the rootwiki site here....
http://rootzwiki.com/topic/35089-can-someone-hook-me-up-with-browserproviderproxyapk/
Worked perfectly after

modded build.prob / update problems to 4.1.2
i have similar Problem
Picture
h**p://i49.tinypic.com/w979qt.jpg
i modded my build.prob to Landsape mode. I guess that i corrupt the Md5 hash
(deleting the row with the added contend didnt solve it....)
I tried a factory reste and an Temp Wipe in clockwork. I thought this should solve the problem but i l get the sam error ....
What should i do ?
Flash a facotory Image ?
How do i get back my root, if the factory image is my only option?
Thanks a lot for your help
greets Razzor

I also had the same problem then remembered that I use FullScreenToggle to get rid of the nav bar. I just had to re-enable it and it installed fine.

If you are getting the error on 'build.prop' look in the /System folder with Root Explorer or the ES explorer. If you see a build.prop.bak, that is probably your original file. Rename build.prop to something else and rename build.prop.bak to build.prop. Restart and then try taking the update again.
If you side-loaded the gnex browser so you could use flash, go to the /System/App folder and make sure you have BrowserProviderProxy.apk and BrowserProviderProxy.odex named properly. As stated earlier, rename browser.apk to browser.apk.bak. Restart and then try taking the update again. I had that problem. After getting the OTA installed, I renamed the browserproviderproxy files again, and made it browser bak file browser.apk. Now I have flash working perfectly again on the gnex stock browser.

Okay i managed to fix the browser proxy thing, turns out i had 10.apk at the end of it for some reason
and i renamed browser.apk to browser.apk.bak so that worked,
but now i got the same problem but with wallet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I remember having to jack around with Wallet to get the original update which allowed other credit/debit cards to be added. Some offered a solution where you could download a modified wallet.apk that would work instead of going through the other hoops. If you did that, the apk probably doesn't pass the verification. If you used a modified Wallet.apk did you backup the original one first?

Groid said:
I remember having to jack around with Wallet to get the original update which allowed other credit/debit cards to be added. Some offered a solution where you could download a modified wallet.apk that would work instead of going through the other hoops. If you did that, the apk probably doesn't pass the verification. If you used a modified Wallet.apk did you backup the original one first?
Click to expand...
Click to collapse
I didn't, and i did use a modified APK, but i deleted that, then i downloaded an original but still not working

build.prob error
Fixing steps for build.prob error :
VERY IMPORTANT: You will los all of your data, please make a backup befor you following this stepps ^^
Error Message apply_patch_check("/system/build.prob - "Numbers" , "Numbers")
My way which worked for me
1.)
The only way, if you dont have any backup of the original build prob file youl have to flash a copy of the factory IMAGE.
In my case i used the Nexus Toolkit 3.2 V - with this marvelous tool I copied the Factory Image 4.1.1 on it
2.)
After the factory Image you will lose your root. Install Clockwork or a other custom recovery image. Then its easy too get back your root with the Toolkit (follow the steps)
3.) If your not able to receve the OTA update to 4.1.2, download it and copy the ZIP to your Nexus 7
After this, go back to Fastboot and install the Updates using the up an down Volium buttons to navigate
Now the updating process should go very smooth
greets Razzor

I have the same error when installing from CWM and the ONLY CHANGES I made to my N7 are:
- Unlock
- Root
- CWM
- Battery Icon
Any other ideas? Will installing from ADB and Android own Recovery will work?
EDIT: I tried the update on my SECOND N7, which have all the above EXCEPT the battery icon mod and it works. So looks like the battery icon mod is the issue! Anyone know how to revert back to the original battery icon?
Also, since the first update failed, when I clicked on "Check" under SYstem Update, now my N7 said the system is up to date. How do I force the update to run again?

The system checks are there for a reason and I am in no way responsible if anyone bricks their device with this but...
https://www.dropbox.com/s/isqpvb0w26kqjdx/4.1.2edited.zip
This is the update with the checks disabled. I didn't make this, got it off another forum, I just used it because I had moved an update to chrome into my /system and there was no easy way to revert it.
I wouldn't advise using this if you made build.prop modifications, but it is useful if your update is failing over some apps like google wallet.
Once again, I didn't make this and I'm not responsible if you for some reason use this to flash the update over some heavily modded rom
It's from JRO03D btw.

All credits goes to Izap for leak​
Before making any post about how to, why doesn't this work? what do i do know, help. please read 1.st and second post where i will write and answer as many questions as possible!
Before flashing this rom, make sure you have a fully working backup in case you want to go back to your old rom
Consider that this may brick your phone if you doing it wrong, however we will provide information for a successful flash​
Thank You @yahyoh (See More at http://forum.xda-developers.com/showpost.php?p=34184248&postcount=581)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHECKSUM.md5 so you can additionally check if above are correct before flashing.
Flashing this will wipe your device.
Screenshot included so you can see its legit.
PDA - LSJ
Modem - LS6 (GSM version)
CSC - LS1 Open version
SGS II XXLSJ Review
Thank You @prads5801
http://www.androidnova.org/official-jelly-bean-leaked-for-samsung-galaxy-sii/
LINKS
PDA
Thank You @layercake87
part1: http://www26.zippyshare.com/v/7484635/file.html
part2: http://www26.zippyshare.com/v/15776471/file.html
part3: http://www26.zippyshare.com/v/15844801/file.html
Magnet Link (EMMC/PDA/MODEM/CSC)
Thank You @DimICE
MagnetURL
Torrent Link
Thank You @ingbrzy
http://uloz.to/xnTcG9P/i9100xxlsj-zip
Google Drive
Thank You @fr3nlysmil3
GoogleDrive
Sammobile Link
Thank You @Sammobile
hotfile.com/dl/179607505/5cd1648/I9100XXLSJ_I9100OXXLS1_OXX.zip.html
Flashable Modem
Thank You @Bieniu
https://www.dropbox.com/s/sn7f0rp6eo9amv8/Modem_I9100XXLS6_CWM.zip
How to Root
Here!
How to get Ripple Lockscreen With 4 Icons/Smart Rotation (Odexed Only!)
Thank You @jarari2
http://forum.xda-developers.com/showthread.php?t=1997919
How to get Ripple Lockscreen With 4 Icons/Smart Rotation (Deodexed Only!)
Thank You @LegendK95
http://forum.xda-developers.com/showthread.php?t=1998682
How to get transparent statusbar (Deodexed Only!)
How to change dpi
Thank You @ paper_heart_21
http://forum.xda-developers.com/showthread.php?p=34342269
Thank You @nims11
http://forum.xda-developers.com/showthread.php?t=1999407
Custom Kernel
How to get more toggles/black statusbar
Thank You @Mirko ddd
http://forum.xda-developers.com/showthread.php?p=34303835#post34303835
How to get 4 Way Reboot *Deodexed*
Thank You @mythtrandyr
http://forum.xda-developers.com/showthread.php?t=1999598
How to get Popup Browser
Thank You @Gyebro
http://forum.xda-developers.com/showthread.php?t=2001818
Rooted/CWM/More Secure Kernel
Thank You @Phil3759
http://www.mediafire.com/file/p5r503u1run77w2/PhilZ-cwm6-XXLSJ-OXX-3.1-signed.zip
http://www.mediafire.com/file/6gpa6xclotu36uj/PhilZ-cwm6-XXLSJ-OXX-3.1.tar.md5
Flash Instructions
Thank You @MajorAly
http://forum.xda-developers.com/showpost.php?p=34219382&postcount=1463
Problems/Solutions
MRNoob Wrote
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
MD5 hash value is invalid
CODE_I9100XXLSJ.tar.md5 is invalid.
End...
Sorry im a noob, what to do
Click to expand...
Click to collapse
Simply rename the CODE_I9100XXLSJ.tar.md5 to .tar

ant987 said:
NOBODY is reading the suggests given by a lot of users! Change the extension from .MD5 to .TAR
Click to expand...
Click to collapse
I Think Many people needs to apologise to Izap for flaming/hating him
This is how it will be if you don't try to read the op
it will be constantly update a few hours forward
Does this have ripple effect?
Yes but its been disabled for our DPI resolution however you can set 180 DPI and reboot and ripples will be there
Can i use Syiah/DorimanX kernel?
NO! as they haven't updated their kernel for this leak
My SIM is locked, now what?
Try restore IMEI from earlier release or download This and do as BANK$ did
BANK$ said:
i installed a 4.0.4 official rom and unlocked again with this app..then i installed jb again with no problems
Click to expand...
Click to collapse
About the 50GB Dropbox space, will i get it?
If you didn't get it while the S3 Giveaway was out then yes, if you got the space and still have it then no
Does this leak support Multi-View?
No & samsung haven't planned to add this feature to our device.
Do we have the palm features as in S3?
No this was also deleted in 4.1.2
How do i take a screenshot?
Press and hold HOME+POWER button
How can i revert to my old rom
You can either flash a CWM flashable and restore from there or flash a safe kernel and restore from there
will this format my internal sd card
No, it will not wipe your internal SD-Card
Basic Information of the files
emmc_EXT4_16GB.pit.html (PIT NOT NEEDED/NOT RECCOMENDED)
emmc_EXT4_32GB.pit.html (PIT NOT NEEDED/NOT RECCOMENDED)
CODE_I9100XXLSJ.tar PDA (ODIN)
56160234/MODEM_I9100XXLS6.tar.md5.html Phone
CSC_HOME_OXX_I9100OXXLS1.tar.md5.html CSC (Mobile Odin = Cache)
###############################################
# #
# GT-I9100 Kernel MMC_CAP_ERASE bug detection #
# By Tungstwenty - forum.xda-developers.com #
# [email protected] #
# #
###############################################
Detecting safety of kernel: zImage
Kernel: Linux version 3.0.31-462349 ([email protected]) (gcc version 4.4.3 (GCC) ) #3 SMP PREEMPT Tue Nov 6 02:42:23 KST 2012
1 ocurrences of the bad code signature
0 ocurrences of the good code signature
***************
!!! WARNING !!!
***************
The kernel appears to have MMC_CAP_ERASE *enabled*, which is dangerous on many devices
Unpacked kernel code stored at: zImage_unpacked
The unsafe instruction can be found at offset 0x0061ea10
Click to expand...
Click to collapse

you know how you can make the rom deodexed?

there wasnt a need for a new thread
i ll post the rooting method here again if this is main thread now
Easiest way to install the ROM achieve root and CWM recovery:
(make sure your battery is over 50%)
Download the firmware
extract the files and rename the tar.md5 files to .tar (remove the .md5 part)
Download Philz rooted kernel
Download Mobile Odin
copy all the files to your phone
Install mobile odin
open it and let it check for missing files
if u are using the free version u will need to download the flash kernel from chainfire's thread
In Mobile Odin:
go to Open file browse to the folder you copied files in and select the CODE_I9100XXLSJ file
go to Open file again and browse to CSC file do the same for the modem file
Now go to Open file and select Philz kernel
Select wipe data and dalvic cache to avoid running in any errors
this way mobile odin will flash this kernel rather than the stock non rooted kernel
Flash the firmware
your phone will reboot into mobile odin's special recovery and will flash the firmware
the phone will reboot some times just done worry leave it on table
After the phone boots pat your self on the back for doing a good job and thank Samsung for finally providing a good stock firmware since the gingerbread days
View attachment 1486422

bluefa1con said:
there wasnt a need for a new thread
i ll post the rooting method here again if this is main thread now
Easiest way to install the ROM achieve root and CWM recovery:
(make sure your battery is over 50%)
Download the firmware
extract the files and rename the tar.md5 files to .tar (remove the .md5 part)
Download Philz rooted kernel
Download Mobile Odin
copy all the files to your phone
Install mobile odin
open it and let it check for missing files
if u are using the free version u will need to download the flash kernel from chainfire's thread
In Mobile Odin:
go to Open file browse to the folder you copied files in and select the CODE_I9100XXLSJ file
go to Open file again and browse to CSC file do the same for the modem file
Now go to Open file and select Philz kernel
Select wipe data and dalvic cache to avoid running in any errors
this way mobile odin will flash this kernel rather than the stock non rooted kernel
Flash the firmware
your phone will reboot into mobile odin's special recovery and will flash the firmware
the phone will reboot some times just done worry leave it on table
After the phone boots pat your self on the back for doing a good job and thank Samsung for finally providing a good stock firmware since the gingerbread days
View attachment 1486422
Click to expand...
Click to collapse
it is indeed as this is a clean thread where no one need to constantly ask over and over again

and .zip for CWM Recovery flashing please Many people like dualboot, maby rooted... or unrootet but for CWM for dualboot.
Thank U

xmyszka said:
and .zip for CWM Recovery flashing please Many people like dualboot, maby rooted... or unrootet but for CWM for dualboot.
Thank U
Click to expand...
Click to collapse
u cant dual boot this rom with any kernel so there us no point

xmyszka said:
and .zip for CWM Recovery flashing please Many people like dualboot, maby rooted... or unrootet but for CWM for dualboot.
Thank U
Click to expand...
Click to collapse
+1

Yeah it's clean now and after 2~3 pages you will have the same questions again and again
1. Is ripple effect working?
2. How to root
3. Is Siyah working?
4. I got simlocked
5. Do i need PIT?
6. Installed Dorimanx kernel and now my phone wont boot
etc etc

Spyr0s said:
Yeah it's clean now and after 2~3 pages you will have the same questions again and again
1. Is ripple effect working?
2. How to root
3. Is Siyah working?
4. I got simlocked
5. Do i need PIT?
6. Installed Dorimanx kernel and now my phone wont boot
etc etc
Click to expand...
Click to collapse
1. No
2. Use Philz rooted kernel
3. No
4. N/A
5. NO
6. Reflash
just wondering can we change the dpi??? editing the .prop ... ehmmmm

downloading this later

cruzzmz said:
1. No
2. Use Philz rooted kernel
3. No
4. N/A
5. NO
6. Reflash
just wondering can we change the dpi??? editing the .prop ... ehmmmm
Click to expand...
Click to collapse
yes you can 180 is the most ive seen for now

I'm still having problems with network lock. No software can unlock my phone while on JB. EFS Pro can restore unlocked version of my /efs but after a restart it all changes back (different md5sums of nv_data.bin files) - everything works fine on 4.0.4
I'm using PhilZ-cwm6-XXLSJ-OXX-3.1 kernel.
When on 4.0.4 EFSPro says that efs file type is "/EFS" but when on JB: "EXT4" and different permissions(-rwx------ on JB vs -rwxr-xr-x on 4.0.4)
adb remount doesn work.
Recovery backup of JB takes 16.5MB(boot.img and recovery.img take 8MB each), cache, data and system have .dup extension(funny thing is, I can still restore it and have fully working JB rom, wtf)
I tried to manually copy the nv_data.bin and changed its permissions and owner/group, still nothing. Any ideas what can be causing it?

phini said:
I'm still having problems with network lock. No software can unlock my phone while on JB. EFS Pro can restore unlocked version of my /efs but after a restart it all changes back (different md5sums of nv_data.bin files) - everything works fine on 4.0.4
I'm using PhilZ-cwm6-XXLSJ-OXX-3.1 kernel.
When on 4.0.4 EFSPro says that efs file type is "/EFS" but when on JB: "EXT4" and different permissions(-rwx------ on JB vs -rwxr-xr-x on 4.0.4)
adb remount doesn work.
Recovery backup of JB takes 16.5MB(boot.img and recovery.img take 8MB each), cache, data and system have .dup extension
I tried to manually copy the nv_data.bin and changed its permissions and owner/group, still nothing. Any ideas what can be causing it?
Click to expand...
Click to collapse
Pay $2.5 and you will get rid of the lock FOREVER. You can use the app as many times you want (however there shouldnt be a need).
Use GalaxSim: fast, easy, cheap and hassle free

Are we have chances to get ripple effect working? Or maybeb it will be in final release?
Sent from my GT-I9100 using xda premium

dorian95 said:
Are we have chances to get ripple effect working? Or maybeb it will be in final release?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Does this have ripple effect?
Yes but its been disabled for our DPI resolution however you can set 180 DPI and reboot and ripples will be there
READ please!
Sent from my GT-I9100 using xda premium

Yes I understand, but I wonder why they changed that, whats wrong with ripple on default dpi
Sent from my GT-I9100 using xda premium

dorian95 said:
Yes I understand, but I wonder why they changed that, whats wrong with ripple on default dpi
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
cant tell you. Ask/request samsung
Sent from my GT-I9100 using xda premium

dorian95 said:
Yes I understand, but I wonder why they changed that, whats wrong with ripple on default dpi
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
nothing is wrong, it was smooth on Sprint release, however we can get it to work, i only need to know that file its related to

good job
Great job mate [and thanks for root, mirrors and cwm file]!
I've just notice this thread, but anyways I've update a post with all the mirrors (at the original thread):
[more mirrors]
http://forum.xda-developers.com/showpost.php?p=34224784&postcount=1544

STOCK ROM JB 4.1.2 FOR BELL CANADA SGH-I757M (FLASHABLE ZIP)
*** NEW AROMA INSTALLER FOR STOCK JB 4.1.2 ***
***************************************************************************
WARNING
***************************************************************************
I assume no responsibility in the event you brick your device. Make sure you have read the instructions before flashing as they may slightly differ from what your used to.​
Click to expand...
Click to collapse
About This ROM:
Hey guys, so Samsung has finally released JB 4.1.2 for the Bell Canada SGH-I757M, which is currently only available through the sammobile.com website and through Samsung KIES. The download zip contains a tar.md5 file and includes a 3e Recovery partition. That's bad news for those of you with a custom recovery. It will be overwritten and you'll have to go through flashing your custom recovery partition again.
So I bring you a Stock Flashable zip that won't replace your custom recovery. That way you can try the new stock rom without loosing root or your custom recovery.
The only credit I assume here is putting the zip package together which involved using @dsixda Kitchen (thanks dsixda). I also added root to this package so that you can have a fully rooted Stock Rom.
Click to expand...
Click to collapse
Images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Instructions:
*** MAKE SURE YOUR BATTERY IS AT LEAST 75% OR MORE BEFORE FLASHING ***
Before you flash this ROM, you will need a custom recovery installed. I recommend Philz touch recovery found here:
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
*** UPDATED: July 31, 2013 v3 - See second post for changes ***
Those of you looking for a flashable zip for rooting that works with the tar.md5 JB rom from sammobile.com, use this one:
CWM-SuperSU-v0.99.zip - I did not put this package together, it was given to my be another member, but it worked when others did not.New Instructions (Aroma Installer):
Instructions for the Aroma Installer version is extremely simple, there is no need to wipe data/format cache/format dalvik-cache as the Installer will take care of that for you if you want it to.
*** ALWAYS REMEMBER TO TAKE A NANDROID AND ALL YOUR NECESSARY BACKUPS BEFORE FLASHING ***
The one zip file contains all of the modems (ICS & JB), the new playstore app (install optional) and all mods. Just download the zip file and flash it like you would any other ROM, then you will be taken through a series of installer screens that will allow you to choose which apps, mods and modems you want to install.
Download:
Aroma Installer for Stock JB 4.1.2 from Samsung v3 - 794.9MB
New Instructions (Aroma Installer):
Instructions for the Aroma Installer version is extremely simple, there is no need to wipe data/format cache/format dalvik-cache as the Installer will take care of that for you if you want it to.
*** ALWAYS REMEMBER TO TAKE A NANDROID AND ALL YOUR NECESSARY BACKUPS BEFORE FLASHING ***
The one zip file contains all of the modems (ICS & JB), the new playstore app (install optional) and all mods. Just download the zip file and flash it like you would any other ROM, then you will be taken through a series of installer screens that will allow you to choose which apps, mods and modems you want to install.
Download:
Aroma Installer for Stock JB 4.1.2 from Samsung v3 - 794.9MB
Click to expand...
Click to collapse
*** For change log, tips and tricks and FAQ, please go to the second post ***
ENJOY!!!

Change Log
*** UPDATED: July 31, 2013 v3 ***
-Aroma Installer now used for flashing
- Option to do a clean install. Will format your /system, /data, /cache and /preload partitions, no need to factory reset before flashing.
- All modem firmwares included with installer
- Option for rooted/non-rooted install
- Option to install the new Google Play Store app
- All mods are included with installer (install optional)
- All stock apps included with installer (install optional)
- Some stock apps placed in /preload/system/app to save space on the /system partition
- Some Google apps placed in /data/app to save space and for easy deletion
Duplicate build.prop entries removed
- All apps are current as of this release
- Additional utility apps included with installer (install optional)
- Install only the mods and apps you want
*** UPDATED: May 12, 2013 v2 ***
- Full Stock/Debloated Stock
- De-Odexed
- All system apps now located in /system/app
- Unsecured Kernel (allows adb to run in root mode)
- su binary and supersu.apk installed for root permission
- Busy Box shell for installed for better control via a terminal emulator (terminal emulator not included yet)
- Busy Box run-parts (init.d) support enabled to allow for running custom shell scripts at boot
Tips and Tricks (This should no longer be needed if your using the Aroma Installer)
The tips and tricks for this phone have been graciously contributed by xda member @rukusx7. Please press the thanks button on his post if it helped you out:
rukusx7's tweaks to improve device performance.
MODS
Extended Power Menu MOD
To apply the Extended Power Menu MOD, download the following zip to your sdcard as it needs to be flashed from CWM:
MOD_SGH-I757M_STOCK_JB_EXTENDED_POWER_MENU.zip (19.6MB)
1. First take a nandroid backup since we are modifying system files and can easily soft brick our phone by doing this.
2. Flash the MOD from CWM, and restart your phone.
Please be aware that the phone doesn't like to start up for the first time after you flash this mod, you will get stuck at the bootloader screen (not sure why). This is easily overcome by pressing and holding your power button for a hard reset (Hold it for about 10 to 15 seconds. You will feel it vibrate). It should then get past the boot screen. If that did not get you past the boot screen, restore your nandroid backup and try again. If the problem still persists. Post a message and I'll see if I can help you out
S-Voice (like apple's SIRI)
Here is a CWM flashable zip that will install the Galaxy S4's S-Voice onto your SGH-I757M. S-Voice is Samsung's SIRI clone. It seems to work fairly well so far. Just a little slow at times. Just download this zip to your sdcard, make a nandroid backup, and flash this zip. This will install S-Voice on your device. (It may force close on you a couple of times when you first open it up. Just keep opening it up until the force closes stop).
SGH-I757M-SVoice-MOD (62.4MB)
Thanks to @cabetoguerra for finding this leaked apk. Other files and libs were gathered by me and mostly found from a zip file created by xda member zoot1.
FAQ
Q. After I flash the Rom, I get FC's (force closes) like crazy, and I'm gonna pull my hair out!
A. If you did not expressly follow the instructions above, go back and read them. You must format the system, cache and data partitions manually in addition to the regular method.
If you did read and follow the instructions and are still getting FC's. Try the whole process over again and flash the Rom twice just to make sure it fully flashed and all the scripts ran successfully.
Thanks to @4runner10 for actually having to try this
Q. I'm on a Telus network and I get no data connection.
A. Check out this post: http://forum.xda-developers.com/showthread.php?t=1987678 for Telus APN settings as they differ from Bell APN settings.
Thanks to @rukusx7 for the tip

*** reserved ***

Download doesn't work.... Requests permission even when logged in
Sent from my SGH-I757M using Tapatalk 2

dmeinder said:
Download doesn't work.... Requests permission even when logged in
Sent from my SGH-I757M using Tapatalk 2
Click to expand...
Click to collapse
I do apologize, I forgot to allow access to it.... it should be fixed now.
Sent from my SGH-I757M using xda premium

is possible root it room?

shadow404040 said:
is possible root it room?
Click to expand...
Click to collapse
It's already rooted
Sent from my SGH-I757M using xda premium

i update for kies is diponible.
please send me the tutorial for rooted and files
thanks

shadow404040 said:
i update for kies is diponible.
pleasThanks to jonnyb for providing me the e send me the tutorial for rooted and files
thanks
Click to expand...
Click to collapse
Use dsixda's tutorial for Clockworkmod here:
http://forum.xda-developers.com/showthread.php?p=27326599
Then download and flash this zip file (not mine):
http://bit.my/13IiJRT
which pushes su and superuser.apk to your phone. Then your root
Sent from my SGH-I757M using xda premium

first time I flashed the rom (followed instructions), was getting FC's during initial setup. i'm going to try a clean install again.

4runner10 said:
first time I flashed the rom (followed instructions), was getting FC's during initial setup. i'm going to try a clean install again.
Click to expand...
Click to collapse
Did you format the partitions as described in the instructions? I was having that same issue until I formatted the partitions.
Sent from my SGH-I757M using xda premium

Maybe try flashing twice just to be sure
Sent from my SGH-I757M using xda premium

BTW thanks a ton for doing this man. looking forward to seeing the stock jb
---------- Post added at 01:53 AM ---------- Previous post was at 01:52 AM ----------
titanic_fanatic said:
Maybe try flashing twice just to be sure
Sent from my SGH-I757M using xda premium
Click to expand...
Click to collapse
yeah, i always used to flash the rom twice but didn't bother this time. might want to mod the instructions! that did the trick, i also wiped the dalvik after the rom and modem were flashed. no idea if that would make a diff tho!
seems pretty smooth during setup!

4runner10 said:
BTW thanks a ton for doing this man. looking forward to seeing the stock jb
---------- Post added at 01:53 AM ---------- Previous post was at 01:52 AM ----------
yeah, i always used to flash the rom twice but didn't bother this time. might want to mod the instructions! that did the trick, i also wiped the dalvik after the rom and modem were flashed. no idea if that would make a diff tho!
seems pretty smooth during setup!
Click to expand...
Click to collapse
Wicked I'll add that right now. Thanks for the feedback
Sent from my SGH-I757M using xda premium

Hmm. Kept getting fc when trying to open settings. I'm back to dadoes for the time being. Thanks again for your work on this man!

4runner10 said:
Hmm. Kept getting fc when trying to open settings. I'm back to dadoes for the time being. Thanks again for your work on this man!
Click to expand...
Click to collapse
I think it might have to do with the new partition and it's weird symlinks. I'll look into moving these files back into the /system/app folder. Hopefully that will help fix the fc's
Sent from my SGH-I757M using xda premium

Cool man. Glad u know more about this than me! I'll await the next version whenever you get around to it.

thanks titanic_fanatic update and root 4.1.2 thanks thanks

Yay! This is going to be fun. Thanks titanic!
Sent from my SGH-I757M using xda premium

Wow amazing! Thanks very much. Had given up on Samsung creating a stock jb ROM for this phone.
Curious if there will be a de-bloated version soon?
Sent from my SGH-I757M using xda app-developers app

WARNING: IF YOU ARE NOT GOING TO START FROM STEP 1 AND FOLLOW EACH STEP EXACTLY HOW I HAVE WROTE IT THEN YOU WILL FAIL. THIS METHOD WORKS IF YOU CAN FOLLOW THE DIRECTIONS.
IF YOU DID NOT RESTORE YOUR PHONE AND FOLLOW EACH STEP EXACTLY HOW I LISTED BELOW THEN DO NOT SAY THIS DOESN'T WORK FOR YOU.
Step 1. Follow @evilpotatoman 's guide below to restore your phone to MJ5 FIRST
Guide:
1) Download and install Heimdall from here for windows. You'll need this and this to avoid missing .dll file errors
2) Download the following files:
MI9_fix.img.ext4
sec_csc.zip
2400258.zip
​Put sec_csc.zip and 2400258.zip on your external SD card
3) Download and install the MJ5 partitions. Use Odin to flash these files (match the file names with the different upload slots)AP_N900AUCUBMJ5.zip​BL_N900AUCUBMJ5.zip​CP_N900AUCUBMJ5.zip​HLTE_USA_ATT_32G.pit​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) Now is the time to use Heimdall.
Reboot into Download Mode once Odin finishes.
Install the vcredist packages downloaded from step 1.
unzip the heimdall .zip file to c:/
go to c:/Heimdall Suite/Drivers and click on zadig.exe
click the middle menu button to select "Show All Devices"
from the dropdown, select MSM8960
click the "install driver" button.
you should see a success message
5) Navigate on your computer to c:/Heimdall Suite/ and open heimdall-frontend.exe.
IMPORTANT -- Go to the Utilities tab and click the "Detect" button
Go to the Flash tab on Heimdall, click Browse and select the HLTE_USA_ATT_32G.pit file downloaded from step 3
Click the 'add' button, then next to 'partition name' select system from the dropdown.
click the Browse button underneath the dropdown, and select the MI9_fix.img.ext4 image you downloaded from step 2.
6) Click Start. ***I usually check the 'No Reboot' box to prepare for booting into recovery
7) Heimdall and your Note will report a bad flash at around 95% -- but don't worry -- your system.img got uploaded Reboot directly into recovery mode.
8) Once in recovery, select "Choose update from external" in the recovery, and select the sec_csc.zip you downloaded earlier (did you remember to put that file on your external SD card?). This will install the CSC files and run the preload checkin so you don't FC all over the place
9) IMPORTANT--After flashing the sec_csc, the Note will reboot.
Try to catch it in time to reboot BACK into recovery
Once in recovery, select "Choose update from external" in the recovery, and select the 2400258.zip you downloaded earlier.
END OF MJ5 RESTORE GUIDE - CONTINUE BELOW
Step 2. YOU ARE NOW ON MJ5 BE SURE TO DOWNLOAD AND INSTALL THE NB4 OTA UPDATE BEFORE CONTINUING!!!
Step 3. When you're finished the restore guide to MJ5 and updated to NB4 then delete any other files used from the restore guide so you don't mix them up and download the following 2 files:
1- Miata KitKat Fix v1
2- KitKat Ota Zip​Step 4. Extract the Miata_KK_Fix_1.0.zip to the root of your BOTH your phone storage and your sd card. (make sure they are not in any folders!!!)
Step 5. Once both files in the Miata_KK_Fix_1.0.zip are extracted and copied to both your phone and the sd card... then reboot the phone.
VERY IMPORTANT TO REBOOT NOW
Step 6. Pick one of the follow options...
(Option A) - Wipes phone - I recommend this method
1. Rename 2400258.zip to update.zip and copy to EXTERNAL STORAGE (aka sd card)
UNPLUG USB CABLE BEFORE CONTINUING
2. Reboot into RECOVERY MODE (volume up + home) and select "Apply Update from external storage" and select your update.zip
3. It should start the update process and finish successfully! Enjoy!​
If you made it this far and it fails or gives you an error then you did something wrong. Start from step 1 restoring your phone to MJ5
(Option B) - Doesn't wipe phone
1. You are going to need an ADB Side loader and it can be found here.
2. Extract to directory C:\Mini-SDK
3. Rename 2400258.zip to update. (DO NOT NAME UPDATE.ZIP, JUST "update".)
4. Place "UPDATE" into the same folder as your ADB C:\Mini-SDK
5. Hold shift and right click in the folder to "Open command window here"
6. Reboot your phone into RECOVERY MODE (volume up + home)
7. Select "Apply update from ADB"
8. Plug phone into usb on PC
9. In your command window type "adb sideload update" without quotes and enjoy!​
If you made it this far and it fails or gives you an error then you did something wrong. Start from step 1 restoring your phone to MJ5
(Option C) - Untested
1. Settings, General, About, Software Update, Check for updates...
2. Download and install update​
If you made it this far and it fails or gives you an error then you did something wrong. Start from step 1 restoring your phone to MJ5
Thanks @opsmgr3774 for the donation!
Thanks @Ciberious42 and @evilpotatoman and anyone else I forgot.

Q&A​
1. Is this safe?
Yes it's using the same exploit from Root De La Vega to run a script that replaces the bad file that is stopping the OTA from installing.
What the script does:
Code:
mount -o rw,remount /system
rm /system/bin/mobicore-presetup.sh
cp /sdcard/mobicore-presetup.sh /system/bin
rm /sdcard/rldv.sh
2. It doesn't work for me!!!
Try it again from the very beginning and read step by step, slowly. Make sure you didn't miss anything! Download the files again also.

mazdamiata210 said:
Reserved
Click to expand...
Click to collapse
Im sure people would be a little more willing to try this is there was a little more info here.
What are these files fixing when flashed, how do i know that these good/ok files to flash that will not brick my device? Because you said it should work. Not nit picking or even saying that it doesnt work. BUT more info on what this is would be beneficial to everyone.

the2rrell said:
Im sure people would be a little more willing to try this is there was a little more info here.
What are these files fixing when flashed, how do i know that these good/ok files to flash that will not brick my device? Because you said it should work. Not nit picking or even saying that it doesnt work. BUT more info on what this is would be beneficial to everyone.
Click to expand...
Click to collapse
Well you're not flashing anything that isn't safe considering they're all the same files from different threads (that are safe) except for the script file in the miata fix zip that I made.

mazdamiata210 said:
Well you're not flashing anything that isn't safe considering they're all the same files from different threads (that are safe) except for the script file in the miata fix zip that I made.
Click to expand...
Click to collapse
Yes i understand have used the Evilpotato mans process. I was reffering to the miata Fix. Just want to know what we are flashing. I am not a dev i dont know how to look at a file and see if it will work/harm a phone.

the2rrell said:
Yes i understand have used the Evilpotato mans process. I was reffering to the miata Fix. Just want to know what we are flashing. I am not a dev i dont know how to look at a file and see if it will work/harm a phone.
Click to expand...
Click to collapse
It can't harm anything do not worry. If you followed this guide exactly it will work. Worst case scenario is that you will have to start over again. All it does is copy the missing file back onto the phone so it no longer fails at 27% it's a simple 3 line script you can open it in notepad and see what it's doing if you like.

I hope that posting this is not bad form, as I don't mean to sound skeptical of the OP....
Has anyone tried this method and had success?

TeldenW said:
I hope that posting this is not bad form, as I don't mean to sound skeptical of the OP....
Has anyone tried this method and had success?
Click to expand...
Click to collapse
Yes! Me! Lol it's completely safe

This fix is failing. Error appears that the device is not using NB4 update.

mazdamiata210 said:
It can't harm anything do not worry. If you followed this guide exactly it will work. Worst case scenario is that you will have to start over again. All it does is copy the missing file back onto the phone so it no longer fails at 27% it's a simple 3 line script you can open it in notepad and see what it's doing if you like.
Click to expand...
Click to collapse
thats all that i think most people will need to know just add that to the OP. the more info the better. if it will help people with the update then hey people need to be here testing/using this method.

TheChefSLC said:
This fix is failing. Error appears that the device is not using NB4 update.
Click to expand...
Click to collapse
Whoops I forgot to mention to take the ota update for nb4 before continuing! Sorry I'm running on 0 sleep... Try it again and after the mj5 restore update to nb4... then continue from step 2

mazdamiata210 said:
Whoops I forgot to mention to take the ota update for nb4 before continuing! Sorry I'm running on 0 sleep... Try it again and after the mj5 restore update to nb4... then continue from step 2
Click to expand...
Click to collapse
Indeed
after MJ5 restore, I was able to run the RDLV script in order to replace the system file needed, Then I ran the OTA update from recovery for NB4, Upon reboot, I was then able to install the KK update NC2

TheChefSLC said:
Indeed
after MJ5 restore, I was able to run the RDLV script in order to replace the system file needed, Then I ran the OTA update from recovery for NB4, Upon reboot, I was then able to install the KK update NC2
Click to expand...
Click to collapse
How do you run the script?

opsmgr3774 said:
How do you run the script?
Click to expand...
Click to collapse
It is part of the OP, the RDLV.sh file that you copy to the root of the internal storage. This is a script file that will replace the other .sh file on your system partition.

opsmgr3774 said:
How do you run the script?
Click to expand...
Click to collapse
When you finish the mj5 restore and update to nb4... As long as the miata fix files are on your internal memory and you reboot the script will run

mazdamiata210 said:
When you finish the mj5 restore and update to nb4... As long as the miata fix files are on your internal memory and you reboot the script will run
Click to expand...
Click to collapse
Thank you. I had done everything but the nb4 update and it failed so I of course panicked, then noticed TheChefSLC said they "ran" the script and wondered if I had missed a step. It's all squared away and fully updated now. It worked. Hooray.

This deserves a news page recommendation
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

I am getting a temporary error when trying to download the miata_kitkat fix. new link please
EDIT...It is working now. THanks

I can confirm this works. I just did it and I am now on 4.4.2 NC2. Thanks!!

This worked for me...
But I did have to use "(Option B) - Doesn't wipe phone", Option A did not work.
Now to wait for root...

Marshmallow root has been much more difficult than simply flash a zip in recovery, because it also requires a modified boot image to work.
I've done all the work for you, this root is achieved with SELinux enforced using Chainfire's method.
The original RUU/Stock rom is here.
In this post you can find the followings:
Aroma Stock Rom
Root Info
GPE Marshmallow on All Models
Disable S-ON System Write Protection
Sweep to sleep module
FAQ
Aroma Stock Rom (All models support with selectable root)
Simplest way to dive in GPE Marshmallow, the installer will guide you to the right direction.
If you want root, take a look at the next section for some info about root methods.
Choose your model in the installer, it also includes proper support for Sprint and Verizon device,
This will NOT convert your device into GPE!! It only flashes a rom.
Aroma Version Stock GPE
Mega Link
​
Important!! If you choose systemless root, please choose "Do not install SuperSU" when reboot in TWRP, because TWRP isn't updated to detect this new method. If you choose to install SuperSU within TWRP you'll get stuck in boot loop.
Root Info
In Marshmallow, Chainfire gave us with two rooting methods include:
The traditional root in system, which breaks OTA functionality.
(It's more stable now)
New "systemless" approach, which means the root stuffs are only in DATA and BOOT, the system will stay intact and it will accept OTAs.
(Note that this method is still in beta stage according to CF)
If you already downloaded the GPE Marshmallow stock rom and you want root, this is where you'd be interested with.
(Non-GSM device should now jump to next section)
Choose your preferred root method above, and follow the correspond instructions below.
Instructions:
Traditional:
Flash m8-mmgpe-su-boot.zip in attachment with TWRP
Flash SuperSU 2.52
Systemless:
Be sure you haven't used any other root method(like the traditional one above), if you've rooted with other methods, please re-flash your system back to pure stock
Flash m8-mmgpe-su-boot-systemless.zip in attachment with TWRP
Download SuperSU-v2.56-20151030013730.zip in this thread, and flash it through TWRP
Important!! Please choose "Do not install SuperSU" when reboot in TWRP, because TWRP isn't updated to detect this new method. If you choose to install SuperSU within TWRP you'll get stuck in bootloop.
GPE Marshmallow on All Models
Not an International/GSM device and still want some Marshmallow love? This is where you'd be interested with.
Simplest way is flash the pre-packed rom above, but if you already downloaded the stock rom and don't want to re-download, then look below.
GPE MM on all models is possible because it uses the Sense all-model dtb image, thanks to sun_dream for his work!!
Choose your preferred root method above, and follow the correspond instructions below.
Instructions:
Traditional:
Flash m8_AIO-mmgpe-su-boot.zip in attachment with TWRP
Flash SuperSU 2.52
Systemless:
Be sure you haven't used any other root method(like the traditional one above), if you've rooted with other methods, please re-flash your system back to pure stock
Flash m8_AIO-mmgpe-su-boot-systemless.zip in attachment with TWRP
Download SuperSU-v2.56-20151030013730.zip in this thread, and flash it through TWRP
Important!! Please choose "Do not install SuperSU" when reboot in TWRP, because TWRP isn't updated to detect this new method. If you choose to install SuperSU within TWRP you'll get stuck in bootloop.
Disable S-ON System Write Protection
After you rooted, you might find out that your system partition is locked up, this is because of HTC's system write protection on S-ON devices, and here is a handy mod for you to bypass it. Original mod by flar2, I modified it to work on MM GPE.
Instructions:
You have to use the traditional root method above to make this work!!
Flash m8-mmgpe-wp_mod.zip in attachment
Sweep to Sleep module
A handy mod to turn of the screen by swiping the bottom of the screen. Original mod by flar2, I modified it to work on MM GPE.
Instructions:
This will flash files to system, there is no point in using systemless method, it ot should be OK
Flash m8-mmgpe-s2s_mod.zip in attachment
FAQ
Q: After choosing full wipe, my contents in internal storage are all gone!!
A: No, it's not. It's a new behavior of Marshmallow. After each clean flash, it will move all previous files in /sdcard into /sdcard/0. You can just move them back to the proper locations.
Q: I cannot install Busybox in system / I cannot use adaway !!
A: Flash wp_mod.
Q: I used systemless root and wanted to keep my system partition intact, how do I install Busybox?
A: Download Busybox Pro, type /su/bin as the installation path for busybox. You cannot do it using the free version, unfortunately.
Q: **** app cannot access external SDcard!!
A: Look at this explanation:
Since Kitkat(2 years ago man), we don't have direct external storage write permission. Google consider it insecure, so they implemented this feature. The reason why you can access external SDcard easily before is because most roms on XDA already contains a hack in /system/etc/permissions/platform.xml. You should not rely on this hack forever, please take a look below.
In lollipop and after, Google provided a much secure and better way to grant external storage access to third party apps, first of all take a look at this article for details:
http://www.androidpolice.com/2014/1...s-automatic-mediastore-and-improves-security/
So instead of using the old platform.xml hack in the old Kitkat days, adopt yourself with this new behavior of Android!! If a certain app cannot access SDcard, ASK THE DEVELOPER to add support for this API!!
Many apps already have support for this API. I'll take Titanium Backup for example, as lots of you cannot find the way to use it on externals SD. In Menu>>Preferences>>Backup Location, you can choose Document Provider on top of the detect button.
In the provider, open the menu on the top right corner and select "Show SDcard", then you'll see External Storage in the left side. Select external SDcard in the document provider and press the button on the bottom, the app will then be granted access to the whole external storage. You can then create a new folder in TiBack and select it as your backup location.
Other apps also follows the instructions above, you just have to manually set up the folder where the app can access, in the case which most of us would love to give access to the whole SDcard, I set the location to the root of external storage. Each app has independent permission, so you have to manually grant each app you wish to access external storage.
Q: I want OTA, what should I do?
A: Look at the following info
To accept OTA updates, you need the following:
Your MID should be 0P6B17000
Your CID should be GOOGL001
You have to fully convert to GPE
You have to keep system partition untouched
You have to have GPE stock recovery
So before anything, if you want to accept OTA, you have to change MID, CID, and convert to GPE. The tricky part is the system partition and the recovery. The easiest way is when the OTA comes, flash the stock rom again without root, flash GPE stock recovery through fastboot, then apply OTA. But if you like to go the hardcore way, here comes a tutorial:
fastboot flash systemless_boot.img
fastboot boot TWRP.img(so that you can use TWRP but you didn't actually flash it)
Flash systemless SuperSU
By doing so you can accept OTA at anytime.
Q: Are there any mods around?
A: Because of the difficulty of file based flashing, modded GPE MM might take a while to appear.
You can use Xposed Framework, as it now officially support Marshmallow.
http://forum.xda-developers.com/showthread.php?t=3034811
Credits:
@Chainfire for the new root methods and SuperSU
@flar2 for wp_mod.ko and s2s_mod.ko
@enewman17 for original RUU
@sun_dream for the all models dtb image
@whaevr for porting to Verizon
@Captain_Throwback for porting to Sprint
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Does this mean it will boot with a warning message?
Edit: My post was in response to the very first version of pre systemless Root for M8 GPE 6.0 .. But the Dev was fast in updating

Noonski said:
Does this mean it will boot with a warning message?
Click to expand...
Click to collapse
no message - just root like normal.

Requires s-off?

Updated thread with systemless root.
Noonski said:
Does this mean it will boot with a warning message?
Click to expand...
Click to collapse
No warning message.
popoyaya said:
Requires s-off?
Click to expand...
Click to collapse
S-ON is OK

Have you encounter any issue with systemless root?
Thanks

Could anyone check if they have HTC's motion launch working with this?

isx said:
Could anyone check if they have HTC's motion launch working with this?
Click to expand...
Click to collapse
I have all of them working... Swipe to unlock is disabled by default though.

nhoc_maruko9x said:
I have all of them working... Swipe to unlock is disabled by default though.
Click to expand...
Click to collapse
EDIT after a TWRP restore and re-flash its all working well.

Anybody lost ex-sd card after using the traditional method?
Sent from my HTC One_M8 using Tapatalk

tominozh said:
Anybody lost ex-sd card after using the traditional method?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Nope, mine still works. I think you've got to go to storage and configure your sd card as removable storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:18 PM ----------
tominozh said:
Anybody lost ex-sd card after using the traditional method?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
@topjohnwu the mod doesnt seem to be working.. v4a still keeps asking for drivers..

n1234d said:
Nope, mine still works. I think you've got to go to storage and configure your sd card as removable storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:18 PM ----------
@topjohnwu the mod doesnt seem to be working.. v4a still keeps asking for drivers..
Click to expand...
Click to collapse
Try copy a random file to system (or remove an system app you don't like) using root explorer and reboot and see if it sticks. I haven't used v4a for years, and I'm not sure if it is something about selinux or other possible reasons.
Also I'm not sure if the su.d script is executing correctly(because stock rom lack init.d support I tried su.d), try this also:
First reboot the device, before doing any modifications to system open terminal on the phone and type:
su
insmod /system/lib/modules/wp_mod.ko
then do the system modification tests.
Thanks a lot!!

topjohnwu said:
Try copy a random file to system (or remove an system app you don't like) using root explorer and reboot and see if it sticks. I haven't used v4a for years, and I'm not sure if it is something about selinux or other possible reasons.
Also I'm not sure if the su.d script is executing correctly(because stock rom lack init.d support I tried su.d), try this also:
First reboot the device, before doing any modifications to system open terminal on the phone and type:
su
insmod /system/lib/modules/wp_mod.ko
then do the system modification tests.
Thanks a lot!!
Click to expand...
Click to collapse
My bad, it does indeed work!! Adaway works, and so does deleting system apps! Thanks a lot

n1234d said:
My bad, it does indeed work!! Adaway works, and so does deleting system apps! Thanks a lot
Click to expand...
Click to collapse
Thanks for the confirmation.
Doing thing blindly without testing is always a challenge

I am loosing htc gestures like double tap to wake after sometime
Have to disable and then re enable it to get it working

Just posting to say that the Systemless Root method worked great for me. Able to successfully modify /System files and folders (verified changes were still there after reboot), restored some apps, Messages, and Call Log using Titanium, and Android Pay is still working after rooting.
Thanks JW!

Is there any way to flash TWRP without PC if you don't have root...??

Well, whatever I try, V4A keeps asking for drivers. I have selinux permissive (selinux mode changer app) and flashed the wp_mod from here. Adaway and other changes to the system partition stick. Any ideas?

Updated post with pre-rooted with aroma installer rom.

gauravbhawsar said:
Is there any way to flash TWRP without PC if you don't have root...??
Click to expand...
Click to collapse
Flashify. Play store.
Or, I have one you can just put on SD card and rename 0p6bimg. It's 2.8.7.0