Hi guys. I'm new here. I've got a very big problem. I had cyanogenmod 10 on my ZTE blade, and it worked perfectly. Once I checked the phone, it was power off, so I wanted to turn it on, but there was no any reaction. Then I plugged it to my PC to charge (the charger isn't working). When I tried to turn it on, the green android was appeared, but nothing else, so I started to search for solution on the internet. Tried several things, installed stock rom, stock firmware, TPT flashed, etc., but now it only starts up only in recovery mod, even if I turn it up simply by pressing the power button. I've tried to flash several ROMs (also cyanogenmod 7) and the CWM was like "Install was succesfull", but my phone is still stuck in Recovery. Please help me, I'm a young student, and I don't have money for a new phone.
(sorry for my bad english, I'm Hungarian, hope You will understand me)
Related
So i recently tried to upgrade my phones kernel and applied the aurora ics 4.1 update1a. The installing seemed fine, no errors so I pressed reboot now on my cwm (from the phones reboot recovery mode), but then it happened, the huawei logo appears and it doesn't go further than that. Tried many methods like removing the battery and running with usb, without battery and on usb, on battery and usb but non worked. If i leave it up a while, I press the power button again and then it turns off. So basically it won't boot further than the huawei start-up logo. Help ?
The phone random installed 2.3.5 on its own, so there the problem is solved.
Hello everyone!
My brother sent me is MX 030. It is the original Meizu MX HK version with the unlocked bootloader. Two weeks ago, he found his phone had crashed. The screen was black and he powering it off and then back on would not do anything (black screen - only vibrates on power on).
I got it today and first thing I did (after charging it-the charging mode works and displays a battery logo) was boot into recovery mode (or update mode on Meizu phones) and I was able to reach the menu. It let me mount the drive onto my PC. I downloaded the latest firmware and put it on the drive. I pressed upgrade and cleared data. The software seemed to install fine, but then the phone rebooted to a black screen - again.
Then I tried installing older versions which I found on the meizu website. They all install and I can see the recovery mode is different, but they all boot into black unresponsive mode (which drains the battery).
Having had other android devices before, I feel the phone is stuck in reboot loop.. I don't know what else to try or attempt. I feel am running out of options. The fact that the phone still responds to some commands and allows me to flash firmware should indicate that the phone isn't brain dead quite yet, right? Anyone else experienced a similar situation?
Thank you,
Oli
After a year of playing with Galaxy S3 I got bored with constant flashing and well, I never got used to onscreen keyboard.
I wanted a phone that will just work and decided to go for a Droid Pro+. Device was form Germany as there is no official distribution in Poland. It worked like a charm for two weeks till just now.
While playing with it (changing ringtones and stuff) I got several messages about services failing - com.service.usb, com.service.google, etc.) As it happened before (but only com.service.usb) I restarted it - in a normal way - power button and then Reboot. It rebooted and after that got stuck on M logo.
The firmware was as stock as it could be. No modifications were made. What's strange, the device can't be hard resetted. I can hold the power button for several minutes and it won't turn off.
Recovery mode works, but wiping does not help. Fastboot also works, but RSD Lite shows N/A in every column of Device info. I flashed GB 2.3.6 (5.5.1Q-110_ELW-TA-36-65-release-keys-signed.Retail-en-GB.tar) found on XDA. The rom itself should be OK, as no functionality was lost (recovery and fastboot), but the device still hangs on the boot logo. Device info is still N/A.
Could it be a hardware malfunction or is there something else I could try? Warranty is probably not an option since as i mentioned there is no official distribution in Poland. Any help would be appreciated since I'm out of ideas by now... Also, does anyone know if the battery is charged when in Recovery or fastboot mode? Connecting to a charger ends up on the M logo. And because very few people in Poland have Moto devices I have no other way to recharge the battery.
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
seasen said:
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
Click to expand...
Click to collapse
This happend to me with my LS980, heres what I did, i waited until my G2 was fully charged, i knew it was fully charged becuase in download mode you should see the letter B, the letter B indicates the battery, if your battery is at "B100" detach your phone from the charger, hold the power button for the phone to restart, and quickly press and hold the power button and the volume down button at thw same time,, repeat this step again quicly after the Boot Logo shows up, and you should boot into Recovery Mode and restore your backup.
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
I tried that for like a 100 times, it wont start into recovery. it just starts back to the splashscreen.
trying this now : http://forum.xda-developers.com/showthread.php?t=2432476
howw to charge the phone when it on bootloop,whenever i plugged the cable its start bootloop
Tried to install a custom ROM on my old N4 via Toolkit but got a bootloop on the Nitrogen logo. Right after the screen the phone would turn off. So, i rolled back to stock rom, unrooted and everything but now it seems the problem its even worse: the boot doesnt go past the Google logo. When the phone is charging i can access the recovery and even boot into Android. Off the charge it looks like i cant do nothing other than go to fastboot. If i choose the recovery option the phone turn itself off. I tried to install other ROM via TWRP when charging, but right after 2 seconds after the process begins, the phone turns off.
I think it may be a battery problem, but i wanna make sure it is so i dont waste money.
Thanks
Pwoper said:
Tried to install a custom ROM on my old N4 via Toolkit but got a bootloop on the Nitrogen logo. Right after the screen the phone would turn off. So, i rolled back to stock rom, unrooted and everything but now it seems the problem its even worse: the boot doesnt go past the Google logo. When the phone is charging i can access the recovery and even boot into Android. Off the charge it looks like i cant do nothing other than go to fastboot. If i choose the recovery option the phone turn itself off. I tried to install other ROM via TWRP when charging, but right after 2 seconds after the process begins, the phone turns off.
I think it may be a battery problem, but i wanna make sure it is so i dont waste money.
Thanks
Click to expand...
Click to collapse
hi buddy, problem is also happend to me, unfortunatly its not a software issue , its a battery problem, and its only fix with changing battery or you could turn on airplane mode (to turn off radio and only in custom rom) and keep using the phone offline.
Hello friends, I have a similar problem with my nexus 4.
I can use the device well if it is connected to a USB or plug. (If the device isn't connected, this turns off). But I can use TWRP without problems (works without connect to a USB or plug), I can install ROMS until finish, but when I want to start the system, only stuck on Google Logo and the device turns off (I tried to start the device but just stuck in Google Logo and turns off again) But if it is connected to a USB or plug works well without problems.
I tried to install all STOCK roms too but only work well when the device is connected. I think that isn't a battery problem because I can use TWRP (without connect to a usb or plug) and install every rom.:crying:
Someone would like to help me. Thanks a lot.
Angel Hyerald said:
Hello friends, I have a similar problem with my nexus 4.
I can use the device well if it is connected to a USB or plug. (If the device isn't connected, this turns off). But I can use TWRP without problems (works without connect to a USB or plug), I can install ROMS until finish, but when I want to start the system, only stuck on Google Logo and the device turns off (I tried to start the device but just stuck in Google Logo and turns off again) But if it is connected to a USB or plug works well without problems.
I tried to install all STOCK roms too but only work well when the device is connected. I think that isn't a battery problem because I can use TWRP (without connect to a usb or plug) and install every rom.:crying:
Someone would like to help me. Thanks a lot.
Click to expand...
Click to collapse
i told just above your post,that is a battery problem and only fixes with changing battery, the reason you can use twrp is that the voltage needed for boot phone in recovery mode is less than for booting the whole system with apps and radio functions