Hi guys,
Yesterday I updated to the new N9005XXUENA6 Leaked KitKat 4.4.2. Didn't really think much of it and finally decided to root the phone.
I rooted the phone with CF-Auto-Root thanks to chainfire. Anyway after that I installed CWM recovery as TWRP haven't really updated it since the new update for note 3.
Now i can get to the CWM recovery and after installing any rom
I tried
1. [JAN-13][hlte][1.2.4] AOSB Project (ProBAM ROM) - The End of The Line ! and then
2. [CM11][4.4.2][N9005][ROM][KERNEL][JAN13] temasek's UNOFFICIAL Build - V33
However, in both cases I get an error:
Kernel is not seandroid enforcing
set warranty bit: kernel
and keeps on boot looping.
I can get into download and recovery but cannot install any custom ROM's.
After a bit of looking around and what i gathered from similar questions,I tried installing a couple of kernels but still its a no go!.
Is it as a result of the new N9005XXUENA6 update? or me doing something idiotic?
P.S: Tried wiping data / factory reset, format partition / system, etc. Cannot find fix permissions in the new CWM however and cannot use TWRP as it just doesn't boot up into the recovery.
Thanks in advance.
Kratumay
kratumay said:
Hi guys,
Yesterday I updated to the new N9005XXUENA6 Leaked KitKat 4.4.2. Didn't really think much of it and finally decided to root the phone.
I rooted the phone with CF-Auto-Root thanks to chainfire. Anyway after that I installed CWM recovery as TWRP haven't really updated it since the new update for note 3.
Now i can get to the CWM recovery and after installing any rom
I tried
1. [JAN-13][hlte][1.2.4] AOSB Project (ProBAM ROM) - The End of The Line ! and then
2. [CM11][4.4.2][N9005][ROM][KERNEL][JAN13] temasek's UNOFFICIAL Build - V33
However, in both cases I get an error:
Kernel is not seandroid enforcing
set warranty bit: kernel
and keeps on boot looping.
I can get into download and recovery but cannot install any custom ROM's.
After a bit of looking around and what i gathered from similar questions,I tried installing a couple of kernels but still its a no go!.
Is it as a result of the new N9005XXUENA6 update? or me doing something idiotic?
P.S: Tried wiping data / factory reset, format partition / system, etc. Cannot find fix permissions in the new CWM however and cannot use TWRP as it just doesn't boot up into the recovery.
Thanks in advance.
Kratumay
Click to expand...
Click to collapse
if you are getting
Kernel is not seandroid enforcing
set warranty bit: kernel
on boot screen thats normal
try flash a rom then flash this straight after http://forum.xda-developers.com/showthread.php?t=2507403
should all work fine
jaythenut said:
if you are getting
Kernel is not seandroid enforcing
set warranty bit: kernel
on boot screen thats normal
try flash a rom then flash this straight after http://forum.xda-developers.com/showthread.php?t=2507403
should all work fine
Click to expand...
Click to collapse
Thanks for the reply,
So once again, I did a factory reset then flashed the rom and then flashed the file you recommended.
Still a no go
Same problem.
kratumay said:
Thanks for the reply,
So once again, I did a factory reset then flashed the rom and then flashed the file you recommended.
Still a no go
Same problem.
Click to expand...
Click to collapse
Based on what I read so far regarding the 4.4.2 update, if you flashed it on your device, there seems to be no way to go back to 4.3 ( I'm not sure if that means custom roms based on 4.3 as well ). Best thing to do is just flash the official 4.4.2 and hang in there until custom roms based on 4.4.2 comes out or people find a way to go back to 4.3. The reason the file from firasusman didn't work is probably because there might be difference in how kit kat deals with efs compared to jellybeans which it was written for in the first place.
Sent from my SM-N9005 using xda app-developers app
You probably are right as it doesn't really work. Anyway I'll keep waiting
Sent from my SM-N9005 using XDA Premium 4 mobile app
same here
Yip you won't be able to go to a lower bootloader than you are on with KK, CM based ROMs are currently running (MJ7) _ will have to wait until the new bootloader is implemented into new(er) builds.
Thanks for that info. Will keep an eye out. Cheers
Sent from my SM-N9005 using XDA Premium 4 mobile app
kratumay said:
Thanks for that info. Will keep an eye out. Cheers
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
tritri71 said:
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
Click to expand...
Click to collapse
Before you did this was your 4.4.2 on KitKat working well? Or did you come from 4.3? If you came from a correctly installed 4.4.2 then do go to this thread and start from STEP 8
http://forum.xda-developers.com/showthread.php?t=2614787
download the files required from STEP 8 onwards.
This is CWM recovery and not TWRP. I dont have experience with TWRP.
tritri71 said:
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
Click to expand...
Click to collapse
I'm assuming you're on 4.3, you have to use this in pda/ap on odin. After flashing phone will restart with android and texts in color. After that it will reboot again to system and you will have root. SEandroid Enforcing is normal if you're rooting you're device. Have you checked with root checker if you have root? Also, once you root your device you will have to flash a custom recovery like cwm or twrp to be able to boot to those recovery.
Hakired said:
Before you did this was your 4.4.2 on KitKat working well? Or did you come from 4.3? If you came from a correctly installed 4.4.2 then do go to this thread and start from STEP 8
http://forum.xda-developers.com/showthread.php?t=2614787
download the files required from STEP 8 onwards.
This is CWM recovery and not TWRP. I dont have experience with TWRP.
Click to expand...
Click to collapse
Thanks a lot !
It Works !
tritri71 said:
Thanks a lot !
It Works !
Click to expand...
Click to collapse
Awesome enjoy kitkat
n9005 cm11 20140226 problems
yesterday i installed cm11 nightly 20140226 on my n9005 via twrp 2.6.3.7 (before i have had 4.3)
it all works fine except 2 little problems:
1. whenever i plug the charger or usb cable to computer, the phone is turned on automatically without pushing the power button.
2. my time & date settings can't be saved, and each time on turning on it goes back to 2013 and 12:00
Thanks in advance to all answers
Same problem
I got the same problem. I have Bobcat 4.3 installed and i'm trying to install Omegarom 4.4.2 but I get stuck in bootloop with '' Kernel is not Seandroid Enforcing ''
Kjetilz said:
I got the same problem. I have Bobcat 4.3 installed and i'm trying to install Omegarom 4.4.2 but I get stuck in bootloop with '' Kernel is not Seandroid Enforcing ''
Click to expand...
Click to collapse
First you will have to update to stock 4.4.2 then you can flash any 4.4.2 roms.
Need some help.Newbie here. I just recently bought a samsung n3 tmobile n900t. I wanted to flash an international ROM to remove those tmobile apps (since im using a different carrier) So I found this ROM here http://forum.xda-developers.com/showthread.php?t=2518249
Installed CWM and flashed the rom. Now i'm in the Kernel is not seandroid enforcing set warranty: kernel loop. What should I do to fix this?
Mediaspot said:
Need some help.Newbie here. I just recently bought a samsung n3 tmobile n900t. I wanted to flash an international ROM to remove those tmobile apps (since im using a different carrier) So I found this ROM here http://forum.xda-developers.com/showthread.php?t=2518249
Installed CWM and flashed the rom. Now i'm in the Kernel is not seandroid enforcing set warranty: kernel loop. What should I do to fix this?
Click to expand...
Click to collapse
The rom you flashed is based on android 4.3, if the phone you bought already have 4.4 then that is probably the cause of the loop. Flash another rom based on 4.4 or download stock firmware from sammobile and flash using odin.
hey_joe said:
The rom you flashed is based on android 4.3, if the phone you bought already have 4.4 then that is probably the cause of the loop. Flash another rom based on 4.4 or download stock firmware from sammobile and flash using odin.
Click to expand...
Click to collapse
I just tried flashing this rom but the same thing. http://forum.xda-developers.com/showthread.php?t=2671039 will try to look for stock firmware and be back with results
I am getting same error but after that phone boots up fine
Hello guys,
I need help My Samsung note 3 n9005 was rooted before and i flashed the stock rom on it and try to root it again. i was able to finish flashing CWM by using odin no problems encountered, but when i tried to install supersu by booting my phone to recovery mode it shows . recovery booting.. seandroid enforcing and after the phone reboots and boots to normal mode.
I already tried different version of Odin and CWM, also tried TWRP and Philztouch but still no luck.
I know i can access superuser by using CF auto root by cf auto root comes with default recovery and wasn't able to install custom roms via zip file.
i hope you all guys can help me out here.
TIA.
Ok so i tried to root my s5 with odin using cf auto root, odin fined but then i my phone would no reboot it said RECOVERY IS NOT SEANDROID ENFORCING set warranty bit.
I could not get the phone to reboot at all so i went back to odin and flashed cwm recovery and now the phone boots up but i have no root access and cwm recovery is not installed!
I tried to repeat the process a few times and still have the same issues!
Someone please call me an idiot and tell me what i am doing wrong?
Thanks.
Good afternoon guys,
i have a big issue with my galaxy s5 SM-G900S (korean version). I bought it as a refurbished device. Knox was on 0x1 so something may have been modified.
It came with the stock (?!) android 4.4.2 from march14. I tried to update but it returned a registration error. Probably because knox is 0x1
In any case, I activated usb debugging and tried to root the phone using cfautoroot and the corresponding root file: CF-Auto-Root-klteskt-klteskt-smg900s.zip which I still assume to be the correct one.
I used odin for flashing. The device was properly connected (blue).
Everything seemed to go smooth until the phone restart when it said "recovery is not seandroid enforcing". I tried several times with both odin 3.07 and 3.09 but i cannot pass this step. I also tried the method to untick auto reboot, shut the phone down manually and boot into recovery mode but it failed.
This means I am now stuck in the bootloop. I can access download mode, but i cannot reach recovery mode. Also the phone is not recognized by the computer if i try to connect it to adb, kies etc. Odin seems to connect properly still.
Alright how should i proceed now?? My actual target is to flash a custom rom. I will need to go for a dirty flash now correct? Should I flash a stock rom with odin? If yes, which one?
Please support me a bit, I am very frustrated on this topic, especially cause I still dont realize my mistake......
Merry Christmas and greets from Bavaria, Germany.
cheeet
Flash the stock firmware to get out of boot loop. After flashing the stock firmware, everything should be working fine and booting again. Instead of using CF auto root, flash a custom recovery like TWRP and then use it to flash the SuperSU zip.
toxious651 said:
Flash the stock firmware to get out of boot loop. After flashing the stock firmware, everything should be working fine and booting again. Instead of using CF auto root, flash a custom recovery like TWRP and then use it to flash the SuperSU zip.
Click to expand...
Click to collapse
Alright, Im back to stock android 4.4.2 now. Works perfect, aside from registration. If I click on "update now" it shows: SKT-USIM required.
Can someone link a detailed guide for flashing cm13? I checked the web but i still dont entirely understand.
In any case I do not want to risk going into a tricky situation once more.....
Thanks in advance.
Greets, cheet
Hi all,
I am sorry if this was answered somewhere, but I did not find it.
I have SM-N901T with 4.4.4 Kitkat. Had IMEI repaired if that makes difference.
When I tried to root the Note I get following boot loop:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
It will not go into recovery and instead goes into download mode. The only way to fix it is to install stock ROM, which works fine, but it will not let me root the phone. After the flash I factory reset and wipe caches, but still no go.
Any idea is appreciated.
Funny, just rooted my other Note 4 which is 5.0.1 and it worked without any issues. Anything connected to 4.4.4? Shall I try to upgrade to 5.0.1 and try to re-root?