Related
I have installed at least 2 different roms and still can't fix the dialer bug. The numbers are not recognized by any operator on calls, it just doesn't don't anything.
Does anyone know any solution or at least know how to come back to stock? Razr M unlocked bootloader
Enviado desde mi Droid Razr M
prosttyle said:
I have installed at least 2 different roms and still can't fix the dialer bug. The numbers are not recognized by any operator on calls, it just doesn't don't anything.
Does anyone know any solution or at least know how to come back to stock? Razr M unlocked bootloader
Enviado desde mi Droid Razr M
Click to expand...
Click to collapse
See below. Or use custom recovery to "go back".
aviwdoowks said:
See below. Or use custom recovery to "go back".
Click to expand...
Click to collapse
Thanks, maybe a last question, If i flash my phone Using RSD lite will it Sim lock for Verizon Only? Mine is a Sim unlocked (Verizon Native) version, i use the phone in SouthAmerica.
Sorry if it is a dumb question, but better be sure
prosttyle said:
Thanks, maybe a last question, If i flash my phone Using RSD lite will it Sim lock for Verizon Only? Mine is a Sim unlocked (Verizon Native) version, i use the phone in SouthAmerica.
Sorry if it is a dumb question, but better be sure
Click to expand...
Click to collapse
Not dumb! I get another about phone screen shot or info please? What xml did you flash? I am collecting those too.
So Am M sw!
I do not think I can advise at the moment.
aviwdoowks said:
Not dumb! I get another about phone screen shot or info please? What xml did you flash? I am collecting those too.
So Am M sw!
I do not think I can advise at the moment.
Click to expand...
Click to collapse
There is the about phone screenshot ,i havent flashed XML yet, im using slimrom.
I will flash the Full v6 version from your signature soon i was using the oficial vzw firmware before so i dont think there will be a problem
Enviado desde mi Droid RAZR M
prosttyle said:
There is the about phone screenshot ,i havent flashed XML yet, im using slimrom.
I will flash the Full v6 version from your signature soon i was using the oficial vzw firmware before so i dont think there will be a problem
Enviado desde mi Droid RAZR M
Click to expand...
Click to collapse
Any rsd xml will trash nv items in system. Is sim UL on the card or on the phone also?
aviwdoowks said:
Any rsd xml will trash nv items in system. Is sim UL on the card or on the phone also?
Click to expand...
Click to collapse
how can i check that? it came i with SIM UL and Verizon official firmware, then i UL'ed the BL and installed severals rom without losing SIM unlock, so i think it is ok
Do you have a contract with Verizon or do you use your phone outside US?
prosttyle said:
how can i check that? it came i with SIM UL and Verizon official firmware, then i UL'ed the BL and installed severals rom without losing SIM unlock, so i think it is ok
Do you have a contract with Verizon or do you use your phone outside US?
Click to expand...
Click to collapse
I am vzw contract.
Ask this op http://forum.xda-developers.com/showthread.php?t=2166542
What are the bands used for GSM by your carrier?
The phone is factory SIM unlocked, meaning that it will accept any SIM, but if the bands for your carrier are the same as US GSM, you need to use the method here: http://forum.xda-developers.com/showthread.php?t=2166542 to open up those bands...
Also, if you haven't already, you'll want to edit your build.prop for GSM use. I'm probably gonna write up a guide on how to do it here eventually so I have an easy link to point to.
Also, FWIW, you won't really get an improvement on stock if you're having connection problems. If anything, stock will lock you down more because Verizon is annoying...
sloosecannon said:
What are the bands used for GSM by your carrier?
The phone is factory SIM unlocked, meaning that it will accept any SIM, but if the bands for your carrier are the same as US GSM, you need to use the method here: http://forum.xda-developers.com/showthread.php?t=2166542 to open up those bands...
Also, if you haven't already, you'll want to edit your build.prop for GSM use. I'm probably gonna write up a guide on how to do it here eventually so I have an easy link to point to.
Also, FWIW, you won't really get an improvement on stock if you're having connection problems. If anything, stock will lock you down more because Verizon is annoying...
Click to expand...
Click to collapse
The GSM band used by my Carrier (Virgin Mobile Chile) is GSM 1900, also i've never edited build.prop since the last time i did for illusion ROM and it didnt work, giving me a softbrick.
The problem i'm having right now is the DialPad, it wont work at all in calls, in any Custom ROM i've installed so far... i dont know what am i doing wrong? since i dont see that bug very often over here
prosttyle said:
The GSM band used by my Carrier (Virgin Mobile Chile) is GSM 1900, also i've never edited build.prop since the last time i did for illusion ROM and it didnt work, giving me a softbrick.
The problem i'm having right now is the DialPad, it wont work at all in calls, in any Custom ROM i've installed so far... i dont know what am i doing wrong? since i dont see that bug very often over here
Click to expand...
Click to collapse
wait... what do you mean by dialpad?
Do you mean the dialpad that you can access in-call? Like to "press 1 to continue"?
There should be a button on the bottom-right to access that... just tap it and it will appear
sloosecannon said:
wait... what do you mean by dialpad?
Do you mean the dialpad that you can access in-call? Like to "press 1 to continue"?
There should be a button on the bottom-right to access that... just tap it and it will appear
Click to expand...
Click to collapse
haha yeah i know that, the thing is i can tap them all and nothing will happen, for example: press 1 to access your account ... then i press 1, and nothing... i can actually spam numbers and nothing, its like pressing nothing at all even when i cant literally have my screen full of numbers actually dialed.
I hope u can understand my explanation
aviwdoowks said:
I am vzw contract.
Ask this op http://forum.xda-developers.com/showthread.php?t=2166542
Click to expand...
Click to collapse
I flashed with RSDLite the XML Today Full version 6, and i got stuck on boot animation. What can i do now?
prosttyle said:
I flashed with RSDLite the XML Today Full version 6, and i got stuck on boot animation. What can i do now?
Click to expand...
Click to collapse
Did you wipe data before?
If so use keys to get to bootloader & select recovery.
Follow guide. You should be a happy face in the guide.
aviwdoowks said:
Did you wipe data before?
If so use keys to get to bootloader & select recovery.
Follow guide. You should be a happy face in the guide.
Click to expand...
Click to collapse
Omg, i didnt wipe data before, thought i didnt have to be cause of RSDLite, derp, my bad... i will come back with more news soon
EDIT: It worked, but the debloated ROm that you recommend on your post is not, fail when flashing
Just to end this thread, everything worked out just fine. Dial pad is working perfectly, I finally installed debloated stock rom with 0 issues, just enjoying now.
Also 0 signal problem.
Thanks for the help guys
Enviado desde mi XT907
prosttyle said:
Just to end this thread, everything worked out just fine. Dial pad is working perfectly, I finally installed debloated stock rom with 0 issues, just enjoying now.
Also 0 signal problem.
Thanks for the help guys
Enviado desde mi XT907
Click to expand...
Click to collapse
No problem, congratulations!
Sent from my XT907 using Tapatalk 4
For cryin out loud...
How to Install Motorola QC Diag Driver for Unlocking Motorola Droid Razr M/HD (XT907/XT926)
MOTOROLA DROID RAZR M/MAXX HD (XT907/XT926) UNLOCK U.S. CARRIERS FULL TUTORIAL
No need to worry about the latest baseband or unlocking bootloaders, just follow the instructions and enjoy your GSM unlocked Razr M
Your welcome!
<--- *dont forget that DONATE button if you appreciate my help*
Thanks slick
Sent from my XT1080 using Tapatalk
nathanalanlister said:
Thanks slick
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
anytime
If I unlock the GSM part of this phone... Can I still use it on verizon?
Sent from my XT907 using xda app-developers app
x_zao_x said:
If I unlock the GSM part of this phone... Can I still use it on verizon?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
yup ^_^
Sim Card
Would this unlock also work for error
Code:
Sim card not recognized please enter a sim card and reboot
?
zaidmed said:
Would this unlock also work for error
Code:
Sim card not recognized please enter a sim card and reboot
?
Click to expand...
Click to collapse
should do. if not use the Droid Razr M utility to restore to stock then run the unlock process
seriously starting to question whether or not i should just pull both the threads and videos ive posted about sim unlocking and letting people just suffer with their issues. this is way too friggin easy and worthwhile to pass up! but im too nice a guy to do that. especially since the videos have a few THOUSAND hits.
how the hell do i keep seeing posts about "i cant do it" "how do you unlock for this carrier" "i want my razr m on a sim company" when its RIGHT HERE!!!!!!&#@%^&#@%
seriously starting to question whether or not i should just pull both the threads and videos ive posted about sim unlocking and letting people just suffer with their issues. this is way too friggin easy and worthwhile to pass up! but im too nice a guy to do that. especially since the videos have a few THOUSAND hits.
how the hell do i keep seeing posts about "i cant do it" "how do you unlock for this carrier" "i want my razr m on a sim company" when its RIGHT HERE!!!!!!&#@%^&#@%
dragonhart6505 said:
seriously starting to question whether or not i should just pull both the threads and videos ive posted about sim unlocking and letting people just suffer with their issues. this is way too friggin easy and worthwhile to pass up! but im too nice a guy to do that. especially since the videos have a few THOUSAND hits.
how the hell do i keep seeing posts about "i cant do it" "how do you unlock for this carrier" "i want my razr m on a sim company" when its RIGHT HERE!!!!!!&#@%^&#@%
Click to expand...
Click to collapse
Dont pull the thread. Its helped alot of people. Im still working on mine but its not your fault. My computer wants to keep reverting to old drivers. im not really sure if im uninstalling the old ones right
DroidRazrNy said:
Dont pull the thread. Its helped alot of people. Im still working on mine but its not your fault. My computer wants to keep reverting to old drivers. im not really sure if im uninstalling the old ones right
Click to expand...
Click to collapse
try ccleaner
dragonhart6505 said:
try ccleaner
Click to expand...
Click to collapse
I will try CC cleaner again. Not sure what Ive tried and not tried at this point. I think Im going to have to start from a fresh OS on my computer lol
DroidRazrNy said:
I will try CC cleaner again. Not sure what Ive tried and not tried at this point. I think Im going to have to start from a fresh OS on my computer lol
Click to expand...
Click to collapse
Could use virtualmachine or make a secondary partition so as not to lose anything you currently have on your machine. Also I updated the video description with a link to the drivers more suited for the process
droid razr m 4.4
4.4 kit kat OTA update just came out and I think my phone automatically updated.. this method does not work for kit kat on droid RAZR M. I can see the nv file and write the nv file, than when I reboot it goes back to 01. 00 does not stick. Used CDMA workshop 3x and goes back every time. Any suggestions?
xdcbox1 said:
4.4 kit kat OTA update just came out and I think my phone automatically updated.. this method does not work for kit kat on droid RAZR M. I can see the nv file and write the nv file, than when I reboot it goes back to 01. 00 does not stick. Used CDMA workshop 3x and goes back every time. Any suggestions?
Click to expand...
Click to collapse
Did you try the radiocomm method? I had a tough time, I had to do it 5-6 times before it would stick..more importantly make sure you have all the drivers installed..I tried 5 time on my pc with 64bit windows and it didn't stick so i went to a computer with window 7 32/bit and it worked first time..after you write it to 00 leave it sit for about 30 sec before restart. wish you luck
crazy4android said:
Did you try the radiocomm method? I had a tough time, I had to do it 5-6 times before it would stick..more importantly make sure you have all the drivers installed..I tried 5 time on my pc with 64bit windows and it didn't stick so i went to a computer with window 7 32/bit and it worked first time..after you write it to 00 leave it sit for about 30 sec before restart. wish you luck
Click to expand...
Click to collapse
it went pretty easy for me.. but I did it a few months ago before the kit-kat release.
radiocomm does work for the razr m kitkat update it just takes a couple of tries. i ran it with the seem file bout six times before it stuck
sylph33d said:
radiocomm does work for the razr m kitkat update it just takes a couple of tries. i ran it with the seem file bout six times before it stuck
Click to expand...
Click to collapse
wow without root though? your stuck with that stupid.. "invalid sim" message from Verizon.. (I guess if you never reboot your phone much.. it's probably fine)
re.
when I try to unlock my droid razr m, I get on the video and when it says click on Motorola its not on my computer so I cant click on it what do I do? thanks
Is there anyway someone could create a new radio for the 186.15 radio that I could flash that would unlock my device? because it's stuck in fast dormancy and there's no windows computers around
Hello. I flashed a Sprint LG G2 to PagePlus. The Flash goes well and All my items stick. But the problem is the connection is unstable. I'm noticed with both the LS970 and LS980 the same problem happens. The mobile data will first connect with 1x then to Evdo. Then the network will disconnect. I flash phones to pageplus all the time and they all have 3G - EVDO. But the unstable 3G is crazy. It will not stay connected. Why are the new LG phones like this? Has anyone encountered this problem and found a solution? I look forward to people's reply because I know a lot of people have run into this problem. Thanks in advanced.
Spelunker10 said:
Hello. I flashed a Sprint LG G2 to PagePlus. The Flash goes well and All my items stick. But the problem is the connection is unstable. I'm noticed with both the LS970 and LS980 the same problem happens. The mobile data will first connect with 1x then to Evdo. Then the network will disconnect. I flash phones to pageplus all the time and they all have 3G - EVDO. But the unstable 3G is crazy. It will not stay connected. Why are the new LG phones like this? Has anyone encountered this problem and found a solution? I look forward to people's reply because I know a lot of people have run into this problem. Thanks in advanced.
Click to expand...
Click to collapse
Hello spelunker10, can the Verizon LG G2 be put on pageplus also?
nas529 said:
Hello spelunker10, can the Verizon LG G2 be put on pageplus also?
Click to expand...
Click to collapse
Hello. Absolutely! That's my personal phone! Just make sure when you flash it, you leave the SIM card in the phone. 3g data works, mms, etc. Good luck.
I have a VZW G2, and want tot ale mine to page plus but I can't find info on flashing anywhere... Can you direct me?
colorsnet said:
I have a VZW G2, and want tot ale mine to page plus but I can't find info on flashing anywhere... Can you direct me?
Click to expand...
Click to collapse
The flashing method is same for all phones. Doesn't matter what kind. I'll give you a good starting place. Viper32 has a forum on here helping people with flashing. And there are plenty of forums with a ton of info. Good luck.
this g2 has been a nightmare for me. i have gotten used to samsung just flash and forget about it, only thing break flash on them is ota. this g2 though..... :/
I'm having same issue. unstable 3g
Sprint probs
What happened with mines is similar but I had the att variant
So I flashed mime to sprint and it worked but only on their 1x network and 3g towers in order for 4g to work and there new spark network I had to get a Sim card and pop it in and boom 4g LTE worked the sec I put it in
You can flash a gsm phone to cdma?
Sent from my SCH-I545 using Tapatalk
More info in the thread. http://forum.xda-developers.com/showthread.php?t=2360776 We got it worked out.
Any issues with losing call history at all, after flashing it to PagePlus?
gadgetdaddy said:
Any issues with losing call history at all, after flashing it to PagePlus?
Click to expand...
Click to collapse
No. Call history has nothing to do with flashing. The only way you can lose call history is if you factory reset the phone or you personally delete the call history yourself.
Spelunker10 said:
No. Call history has nothing to do with flashing. The only way you can lose call history is if you factory reset the phone or you personally delete the call history yourself.
Click to expand...
Click to collapse
Actually its a known issue with this phone, that it looses its call history when flashed.
It has something to do with the Stock ROM release
I have the same issue.
Also I get a "MIP : 89" error sometimes.
Also, I have a system update downloaded waiting to install but not sure if it'll kill my flash so I've been scared to hit the button.
loveandhate said:
I have the same issue.
Also I get a "MIP : 89" error sometimes.
Also, I have a system update downloaded waiting to install but not sure if it'll kill my flash so I've been scared to hit the button.
Click to expand...
Click to collapse
Is your phone the LS980? I had a customer who updated his LS980 this past week and I had to re-flash his phone. You'll probably have to re-flash as well.
3G doesnt stick
Spelunker10 said:
More info in the thread. http://forum.xda-developers.com/showthread.php?t=2360776 We got it worked out.
Click to expand...
Click to collapse
whats up Spelunker10
did you figure out! how to make the 3G stick on the LG G2 please need your help flashed like 10 different ways but still stuck on 1X
nexio said:
whats up Spelunker10
did you figure out! how to make the 3G stick on the LG G2 please need your help flashed like 10 different ways but still stuck on 1X
Click to expand...
Click to collapse
I did. What android version are you running?
Spelunker10 said:
I did. What android version are you running?
Click to expand...
Click to collapse
A custom rom 4.4.2 and thank you for answering back to me
nexio said:
A custom rom 4.4.2 and thank you for answering back to me
Click to expand...
Click to collapse
I bet I know what your missing. Did you flash the custom nv file?
Spelunker10 said:
I bet I know what your missing. Did you flash the custom nv file?
Click to expand...
Click to collapse
Which Custom nv files? Do you mean the ones from cama workshop
nexio said:
Which Custom nv files? Do you mean the ones from cama workshop
Click to expand...
Click to collapse
Yes you flash it in CDMA workshop under the Memory Tab. Did you flash this file?
Good Morning fellas,
I have been searching for about a week and I can usually fix my own issues with the help of the forums. But this one has me stumped. I have the Verizon S5, Had it rooted and then lost root. Got an OTA of Lollipop installed with no problem but of course couldnt root. I just got my phone back to NCG last night but the Major problem is I do not have any data without being on wifi. In the APN is only the verizon apn and its greyed out. Also can not add another apn. Straight talk runs on ATT APN info (TF DATA) I was wondering if it would be possible if i downloaded an ATT rom that added the ATT APN if that would work? that is the only thing i can possibly think of that could potentially solve my problem. I Thank you in advance for all of the knowledge that is shared here at the forums. :good:
UDPATE**
I tried to install the stock revert for ATT 900a. loaded in odin fine but failed. I think from all the times i have tried to mess around with custom roms with no luck on installing any. I locked my sim card. When i went to the BYOP program with my verizon s5 it worked just fine. IDK.
jjeffries0423 said:
UDPATE**
I tried to install the stock revert for ATT 900a. loaded in odin fine but failed. I think from all the times i have tried to mess around with custom roms with no luck on installing any. I locked my sim card. When i went to the BYOP program with my verizon s5 it worked just fine. IDK.
Click to expand...
Click to collapse
I don't have enough knowledge to advise you in the apn arena, but trying to install ATT rom/tar on the vzw phone might give you a real slick looking paperweight.
haha it would if i didnt have the verizon revert back to stock ncg file
Another update,
I called straight talk and told them i wasnt sure what happened it all of a sudden stopped working and they are sending me another sim card to try
jjeffries0423 said:
Good Morning fellas,
I have been searching for about a week and I can usually fix my own issues with the help of the forums. But this one has me stumped. I have the Verizon S5, Had it rooted and then lost root. Got an OTA of Lollipop installed with no problem but of course couldnt root. I just got my phone back to NCG last night but the Major problem is I do not have any data without being on wifi. In the APN is only the verizon apn and its greyed out. Also can not add another apn. Straight talk runs on ATT APN info (TF DATA) I was wondering if it would be possible if i downloaded an ATT rom that added the ATT APN if that would work? that is the only thing i can possibly think of that could potentially solve my problem. I Thank you in advance for all of the knowledge that is shared here at the forums. :good:
Click to expand...
Click to collapse
You know they make a Verizon Sim for straight talk. I have one in my s4. Works well.
Sent from my SM-T707V using XDA Free mobile app
Hey guys,
I'm new to the forum so please excuse me if this is the wrong place to post this. I'll start from the beginning. I bought a Galaxy S4 (SGH-I337m) from somebody in my city. They said the phone originally worked with Rogers/Fido, but that they switched the logic board on it so now it works with Bell/Virgin. The thing is though, when I put my Virgin Mobile sim card in the phone, it won't let me send texts or make calls. I checked the IMEI and it's not blacklisted or anything.
It says No Service and has the little circle with a diagonal line showing up in the notification bar and when I try to send a text, it says No Network Connection (No signal found for mobile networks). I find it weird because I still get a notification saying that I have an unheard voicemail.
I've tried resetting the phone multiple times. I've also tried flashing both the Bell and Virgin Mobile Lollipop firmwares and that didn't work either. To be honest, I'm not sure how to tell which one I would need to install. I noticed when trying to flash the Bell firmware, that the phone kinda skips to a black screen quickly every time I close an app. I'm assuming that would mean it needs the Virgin Mobile firmware.
That still doesn't fix the mobile network issue though. If anyone could help me out, I would GREATLY appreciate it!!!! Here is a bit of info, I'm hoping it helps. If you need anything else, please let me know.
Model number: SGH-I337M
Android Version: 5.0.1
Baseband Version: I337MVLUGOC4
Build Number: LRX22C.I337MVLUGOC4
Also, in the "Status" menu, I noticed it says:
Service State
Voice: Out of Service / Data: Out of Service
Not sure if that has anything to do with it or if that's normal. Again, if you have any suggestions, PLEASE let me know. I'm super desperate as I can't afford to lose the money I paid for this. Thanks in advance.
EDIT: Coincidentally my girlfriend has a Galaxy S4 of the same model and with Bell/Virgin. I opened up the ABOUT DEVICE menu in both phones and the only other difference I noticed is on hers it says:
SE for Android Status:
"sepf_sgh-I337M_5.0.1_0013"
And mine says "sepf_sgh-I337M_5.0.1_0009"
Does that have anything to do with it maybe?
TeknikalMusic said:
Does that have anything to do with it maybe?
Click to expand...
Click to collapse
Install this APP and add all screenshots pls .
Okay, will do. I will post the screenshots in about 20 mins. I rooted the phone, installed CWM and am in the middle of flashing the latest firmware again. I forgot to enable USB debugging before flashing originally and I wanted to install CWM to wipe the cache. No idea if that would make a difference but I've been up all night trying anything lol. Thank you for the reply though, will post the screenshots in about 20 mins.
TeknikalMusic said:
Okay, will do. I will post the screenshots in about 20 mins. I rooted the phone, installed CWM and am in the middle of flashing the latest firmware again. I forgot to enable USB debugging before flashing originally and I wanted to install CWM to wipe the cache. No idea if that would make a difference but I've been up all night trying anything lol. Thank you for the reply though, will post the screenshots in about 20 mins.
Click to expand...
Click to collapse
Don't flash more things atm for avoid one brick pls :highfive:
Joku1981 said:
Don't flash more things atm for avoid one brick pls :highfive:
Click to expand...
Click to collapse
Okay, I have the app installed. Which screens should I screenshot? I know you shouldn't post your IMEI online, so I'm assuming I skip the "personal" tab or?
Here is 4 of the screenshots I took (I hope this works lol)
Here are the other 2 I took
TeknikalMusic said:
Here are the other 2 I took
Click to expand...
Click to collapse
All seems correct but I think your device works for Bell Mobile (BMC) only but NOT for Virgin Mobile (VMC). Try to use one BELL simcard for verify it.
Joku1981 said:
All seems correct but I think your device works for Bell Mobile (BMC) only but NOT for Virgin Mobile (VMC). Try to use one BELL simcard for verify it.
Click to expand...
Click to collapse
In all my experience, Bell/Virgin are always interchangeable. Same with Telus/Koodo and Rogers/Fido. I tried putting a Bell sim card in though just now and it still has the problem. It doesnt load any of the signal bars or anything. Oddly enough, when there is no sim card in the phone, the bars show up?
TeknikalMusic said:
In all my experience, Bell/Virgin are always interchangeable. Same with Telus/Koodo and Rogers/Fido. I tried putting a Bell sim card in though just now and it still has the problem. It doesnt load any of the signal bars or anything. Oddly enough, when there is no sim card in the phone, the bars show up?
Click to expand...
Click to collapse
Don't doubt it and return it if you can still.
Joku1981 said:
Don't doubt it and return it if you can still.
Click to expand...
Click to collapse
Since it was from Bell, would flashing the Virgin Mobile firmware somehow mess it up? What are the exact steps I would need to take to try to reset it back to stock settings? I'm wondering if I'm missing anything. Or if the APN settings have anything to do with it? I set them to default already and tried adding the Virgin Mobile Canada apn settings as well
http://forum.xda-developers.com/galaxy-s4-att is the proper place to ask your questions regarding your S4, rather than where you originally posted this, the International S4 forum. Since more people with your device will be available at the given link, you may want to ask your questions over there. Or simply be patient, as this thread will be moved over there in due time.