recently, I rooted my phone and after that I updated via software-updater and it rebooted. finally , it had an error ''boot certification invalid'' and after that I install twrp on my device and tried to backup everything(also efs) and it went right. I have a backup but after that I wipe everything (also efs) and i wanted to try to install d802 stock rom via zip files on the forum and all wipe is ok and i went to reboot recovery after that my phone's motherboard has a debug. Guarantee service said me : '' there is problem motherboard software and we can't repair it. You should change motherboard '' .
What is your advice for the problem? Do I need to go to another guarantee service ?
Sorry, my bad english....
it seems your motherboard's hardware is fine since you're able to do all the things you mentioned and the phone boots to recovery, I think it's a firmware issue.
I would try to force the phone in download mode and flash a stock .kdz file through the Lg firmware utility.
you should find all files and instructions on the xda forums.
stilkus said:
it seems your motherboard's hardware is fine since you're able to do all the things you mentioned and the phone boots to recovery, I think it's a firmware issue.
I would try to force the phone in download mode and flash a stock .kdz file through the Lg firmware utility.
you should find all files and instructions on the xda forums.
Click to expand...
Click to collapse
yes i also think like you but i tried all things on the forum but when i try it my ubuntu didn't see phone's internal memory so i couldn't flash twrp on ubuntu and i cannot flash stock rom via flashtool because my win8 didn't see phone's driver even all needed drivers are installed..
thanks for your help...
same problem
i have the same problem with you and i dont know what i can do
Related
Hello people. I have to ask one question about my LG L5 E610.
My L5 E610 has stock 4.1.2 baseband 20G, most updated to date, I updated via KDZ updater.
I already rooted and installed custom ROM on three differents phones, ZTE and Samsung, never had any problems, so I can say that I have some experiences, but in case of samsung, for use warranty, is needed to install everything stock and reset flash counter, so I wonder if my E610 will be needed the same procedures ?
I'm thinking of installing CM10.2 on my LG L5 E610, I believe one day I will do this, but then I need to know how to install back EVERYTHING STOCK IN CASE OF WARRANTY, but never found tutorial about it, never heard if LG has flash counter, but I bet doesn't have.
anyone can tell me if it's possible or explain me how to install stock ROM, stock Recovery and stock Kernel after customizate everything on E610 ?
Never heard about flash counter.
For returning all to stock (as far as i know) you must have 2 kdz
1: v10d_downgrade , made by someone in 4pda, search it over internet. Its special because it wipes out everything, others kdz just flash up system and that's it, if you already have a bootloop or have a custom rom that may be not compatible with stock, normal kdz wont boot at all.
2: your OFFICIAL stock kdz for your VERSION (e610/e612/e612g/f, etc) get it from here
In case you want to return to stock, boot in download mode (hold vol - / + while connecting usb cable until vibrate) and flash it up. Flash v10d... let it boot (it'll be in russian lol) and then flash your normal kdz (by booting in download mode again)
Then, you can try anything you want (pls, don't mess with swap partition, 2 phones are almost hard-bricked while playing with that and it couldn't flash kdz either!)
Good Luck!
just use the kdz updater
Sent from my LG-P700 using xda app-developers app
raul338 said:
Never heard about flash counter.
Good Luck!
Click to expand...
Click to collapse
it's thing from Samsung, if users flash the custom rom, the phone will show how much custom ROM was flashed, it can be consulted in warranty that the phone has already flashed and the warranty will be voided. but there does exist methods to do reset flash counter, but I guess only Samsung phones do have it.
but what happens if I have everything custom and then flash the normal KDZ like 20g baseband ? Will be bricked ? and can be unbricked ?
the flash counter can be removed by triangle
Sent from my LG-P700 using xda app-developers app
my phone has root, free bootloader and with custom ROM and CWM.
KDZ updater won't work on Windows 8.1, installed msxml and put compatibility/administrator and no luck.
is there another way to flash downgrade v10 ?
RenatoNismo said:
my phone has root, free bootloader and with custom ROM and CWM.
KDZ updater won't work on Windows 8.1, installed msxml and put compatibility/administrator and no luck.
is there another way to flash downgrade v10 ?
Click to expand...
Click to collapse
kdz working on window 8. let try again. check your drivers installed
kien_vip said:
kdz working on window 8. let try again. check your drivers installed
Click to expand...
Click to collapse
anyway, yesterday I downloaded KDZ and it worked and flashed rom my phone.
maybe I got very recent KDZ or I have update 1 of Windows 8.1
Hi everyone,
I am having issues with this phone of mine. Here is a background of it:
My phone is rooted and is running rayglobe rom. I tried updating the update that it gave me and made me stuck in bootloop.
Now I downloaded another rom, which I don't remember since this happened december 2013. after flashing, it does not boot and does not make me go to TWRP anymore. Now I tried using download mode to restore my phone. but eveytime I try to flash (using the 2 methods I saw in the thread), either it hangs at 49% or the other one does not start flashing because it says I have inconsistent dll? I downloaded a D802 stock rom and tried flashing via download mode and it says that I have different model (F380K). Now I tried downloading a dll and F380K stock rom, but won't allow me because it says that my phone is D802. But when I go to download mode it is korean and it says F380K.
I think I have flashed a korean rom before which made this incident happen, but do you have any idea how I can restore this?
Thank you all in advance.
If this was me, I would do a factory reset.
sounds like you should go back to stock firmware.
http://forum.xda-developers.com/showthread.php?t=2432476
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxxxxxxxxxxxx<YOUR IMEI NO.
First check what exactly phone model in Internet Browser. Then download TOT and flash back to stock.
xaneybert said:
Hi everyone,
I am having issues with this phone of mine. Here is a background of it:
My phone is rooted and is running rayglobe rom. I tried updating the update that it gave me and made me stuck in bootloop.
Now I downloaded another rom, which I don't remember since this happened december 2013. after flashing, it does not boot and does not make me go to TWRP anymore. Now I tried using download mode to restore my phone. but eveytime I try to flash (using the 2 methods I saw in the thread), either it hangs at 49% or the other one does not start flashing because it says I have inconsistent dll? I downloaded a D802 stock rom and tried flashing via download mode and it says that I have different model (F380K). Now I tried downloading a dll and F380K stock rom, but won't allow me because it says that my phone is D802. But when I go to download mode it is korean and it says F380K.
I think I have flashed a korean rom before which made this incident happen, but do you have any idea how I can restore this?
Thank you all in advance.
Click to expand...
Click to collapse
I faced similar problem with D800. I had the correct dll and the firmware but it failed saying my phone model was different (I think its because I tried the "upgrade recovery" option on the LG PC software by selecting a different model).
My phone was passing the LG screen and stuck at android boot screen.
What I did:
Pushed a kitkat based rom for D800 to sdcard using adb on Linux (on windows adb failed to recognise the device).
Then adb reboot recovery and flashed the rom.
Then I was able to flash the factory image.
2 days ago i flashed twrp on my pure stock note 4, i did backup my rom including EFS using twrp and then flash kyubi rom with nameless kernel, it all went well. just now i wipe data ,system, cache on twrp and restore my backup stock rom and it went well too...and then i try to flash stock rom using odin so i can get back the stock recovery mode for OTA update when MM releases.. the flashing was a sucess and phone booted but my data inside werent wipe.
so i went to recovery mode and saw this dm-verity verification failed on the bottom i proceed to wipe data and reboot my phone, its all working now no problems except i cant reset my phone with the setting inside it will just bring me to recovey mode and stay there with that message.
now i did some research, some saying will bootloop and stuffs but mine is all ok no problem except i cant reset it inside the settings..
anyone can help me get rid of that message/problem?
If you format everything in advance format in twrp and then flash stock firmware this message will go away.
got the same problem. Then I went to a local store. They helped me. Here are steps
1. Pull out your battery, check your serial number (S/N:....)
2. Download smart switch, enter emergency software recovery..... Enter your serial number
3. Turn off your phone. Enter download mode or sth ( I don't remember it clearly. just power + vol down or up. just try it)
4. Smart switch will recognize your phone. Choose a firmware to download. then wait
5. Enjoy stock firmware
Use kies3 reinstall drivers, then use emergency recovery in kies to reinstall your current firmware or opt to update to latest or most recent release or version then follow kies instructions
rooted s5 smg900r4
Hello everyone
I have found a way to fix dm-verity and DRK issues and it works like official, meaning no errors in stock recovery and OTA works with Official firmware, the problem is related to corrupted/deleted 3 files on /efs partition. I have tested it on SM-N910C so I guess it works on other Exynos variants, perhaps even on snapdragon if the partition layout is similar? Kies won't restore DRK or dm-verity check because it doesn't write to EFS. I can fix yours if someone is interested via Team Viewer, you will need the following:
1. PM contact me for Skype ID
2. Stock rom, rooted (any root method)
3. Adb debugging enabled and drivers installed (Kies or SmartSwitch)
After repair you can enter your stock recovery and confirm there is no DRK/dm-verity red letters error.
Regards,
magix01
please guide us the proceedure here .. i have a phone with same problem & i have to update it to MM ...
dork997 said:
If you format everything in advance format in twrp and then flash stock firmware this message will go away.
Click to expand...
Click to collapse
Mine still says fail. but it also says "need to check drk first" could anyone possibly help me im stuck.the phone loads up and everything. but when i try to root or anything or flash any other firmware than n910pvpu5dqi5 it fails about 4 seconds in to flashing on odin. ive downloaded every possible firmware specific to the SM-N910P but only one worked.
im a big noob with the note 4 this is my first luckily its not my daily phone yet. im very familiar with the note 3 n900t but im finding they are very different. any advice would be appreciated!
Sir, please reply
When i unlocked my bootloader on my redmi phone this warning comes, but after clicking power button it will successfully boot to system but i m confused did i flash any rom in it, is it safe or not
Manish_k said:
Sir, please reply
When i unlocked my bootloader on my redmi phone this warning comes, but after clicking power button it will successfully boot to system but i m confused did i flash any rom in it, is it safe or not
Click to expand...
Click to collapse
If you just unlocked your bootloader and thats it, your rom should still be the stock one.
Hi everyone, I perhaps kill my old lg g2 [R.I.P], but maeby you find a solution for that. This is my story.
Today I want to install MIUI 8 so i download one .zip file from this forum. Like always i do full wipe and then install ROM. everything be normal, ROM be installed and i started setting my new OS. After few sec, i can't go thought the setting cuz there be a error. I decided to reinstall system one more time, and this is that moment when I know I f**k up. Off my phone, wanna on TWRP and then i see i can't do anything, phone stuck in LG logo.
Any ida what to do?
Thanks for all ideas.
Maybe go back to a stock ROM and start over? This thread may be helpful in getting back to stock: https://forum.xda-developers.com/showthread.php?t=2432476
The thread helped me go from Cloudy 3.2 to stock MM on a d802.
audit13 said:
Maybe go back to a stock ROM and start over? This thread may be helpful in getting back to stock: https://forum.xda-developers.com/showthread.php?t=2432476
The thread helped me go from Cloudy 3.2 to stock MM on a d802.
Click to expand...
Click to collapse
Right so I'm facing two problems with going back to stock method:
1) as i said, the phone won't boot up on flashing ANY version of d802 firmware (I've observed that in lg flash tool, where you flash tot files, shows that the phone's model number is d802at. So I'll try flashing a d802at fw for the last time and see if it works)
2) i try to flash an ls980 fw, the flash tool gives a model number error. (If flashing d802at fw doesn't work, then i guess i have to modify the hex data in the ls980zve.tot file and force flash it on the phone)
I'll give you an update after something has happened.
@ audit13 it is work!!! Thanks for your help! And I have one last question, I still have root acces and TWRP installed?
Glad it worked
You should be back to stock recovery and no root.
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
zzThrain is right -- I wouldn't risk flashing custom ROMs at this stage, especially because many contain new bootloaders or other stuff that might make this even worse for you. Just pick up the relevant Samsung stock ROM file (from, for example, SamMobile) and see if it boots normally again. Once it does, re-do the process *after checking all MD5s of the files you used* -- I, too, have had it happen before that a download went corrupted and I flashed it. If all is well, get into Download Mode and let Odin rip.
rixon.d9 said:
Hello guys
My phone is Galaxy S7 Edge Duos- SM935FD. I seem to have bricked the device.
Below are the actions I have performed.
1. Flashed TWRP using ODIN as described on https://www.the***********.com/root-samsung-galaxy-s7-edge/
2. Booted successfully into the OS. Found superuser app installed.
3. When I went to back to Flash ROM i erased multiple things such as internal storage/dalvik/cache/system after which device got stuck in bootloop. Showing NO OS.
4. I tried flasing Custom ROM Zip files through OTG. The process failed showing package corrupt and still stuck in bootloop.
I can enter recovery/download mode however cant seem to get the device booted. How can I get the device to work either Custom or stock ROM.
I will be going through some threads in the meantime, your guidance is very much appreciated.
Click to expand...
Click to collapse
Go to recovery mode & transfer rom to phone using pc. wipe cache, delvikcache, data only. No need to wipe internal sd. Install rom & reboot.
if you phone goes to recovery or download mode, no need to worry. If it doesn't go to neither recovery nor download mode, them your phone might have probably bricked.
It's my pleasure to help you if you still facing this problem
zzThrain said:
Flash stock rom with Odin: This shouldnt be posted on Development Forum but rayher questions and Answers.
Find what your Stock Firmware for your phone is using Sammobile and flash stock then re do rooting and TWRP Process
Click to expand...
Click to collapse
Hi
I tried flashing stock rom from sammobile. I could find for SM-935FD hence downloaded SM-935F.
It got stuck at 90% showing System in ODIN.
From the ZIP file which is the file that needs to be flashed among below ? I tried AP.
AP_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship_meta.tar
BL_G935FXXU2DRB6_CL12365438_QB16944063_REV00_user_low_ship.tar
CP_G935FXXU2DRAG_CL648265_QB8691891_SIGNED.tar
CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
HOME_CSC_OJV_G935FOJV2DRAG_CL12785220_QB16560277_REV00_user_low_ship.tar
Now when I try again it immediately shows FAIL. Am i Flashing the right stock rom ?
It Worked. Thanks to all who helped.
I wasn't running ODIN as Admin and also was using an slightly older version V3.10.7.