Database Users

[Q] How do I flash a kernal?

How do I flash a kernal on my Wildfire? I downloaded Jacob's overclockable one.
Thanks.

Same way you flash a rom...
Sent from my HTC Wildfire using XDA App

kevin2516 said:
Same way you flash a rom...
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Yeah, put it on sd card, boot to recovery and flash it.

Thats what I did, it installed it or something in less then a second but nothing changed.

Kernel information didn't change ? The kernel name should change to a very long name with jacob inside.

No it didn't change, now I have a CyanogenMod rom, with Jacob's kernal but no the one that you can overclock with.

Did you try oc'ing in SetCPU? The kernel is not overclocked by default because then, some users had problems booting with the pre overclocked kernel.
SetCPU is officially available on the XDA Forums. Just perform a search.

3xeno said:
Did you try oc'ing in SetCPU? The kernel is not overclocked by default because then, some users had problems booting with the pre overclocked kernel.
SetCPU is officially available on the XDA Forums. Just perform a search.
Click to expand...
Click to collapse
I have SetCPU, can you write down how to flash a kernal step by step for me?
I would really appreciate it.

Really, its the same as flashing a Custom ROM. If you were able to flash one, you should be able to flash this as well. (Restart in Recovery Mode, Install Zip from SDC)
BTW, it should show this under Settings > About Phone > Software Information > Kernel Version - [email protected] #1
This will show the kernel is successfully flashed. What is the maximum you can see in SetCPU? Is it still 528?

3xeno said:
Really, its the same as flashing a Custom ROM. If you were able to flash one, you should be able to flash this as well. (Restart in Recovery Mode, Install Zip from SDC)
BTW, it should show this under Settings > About Phone > Software Information > Kernel Version - [email protected] #1
This will show the kernel is successfully flashed. What is the maximum you can see in SetCPU? Is it still 528?
Click to expand...
Click to collapse
That's exactly what is says on the kernal, and yeah the maximum I see is 528.

Hmm.. did you hit autodetect speed under device selection ?

argeoff said:
Hmm.. did you hit autodetect speed under device selection ?
Click to expand...
Click to collapse
Yes I did.

kernel for CM 10.2 with overclocking capabilities?

I probably searched for oc kernel for days now.There isn't right?

portis said:
I probably searched for oc kernel for days now.There isn't right?
Click to expand...
Click to collapse
have you even looked in the development forums
there are lots of kernels that have oc capabilities, and that are compatible with cm 10.2.

Yes i do. Mybe the problem is in me,could you give as a link to 1 kernel for example.Thanks.
simms22 said:
have you even looked in the development forums
there are lots of kernels that have oc capabilities, and that are compatible with cm 10.2.
Click to expand...
Click to collapse

trinity kernel, latest, tf4h is the name http://goo.gl/wteFmX
it can be clocked to 1728mhz, but you need a cpu control app for that. its defaulted to 1026mhz when it boots. dont let the 1026mhz scare you, its as quick as many other kernels at 1512mhz
trinity fours xda thread http://forum.xda-developers.com/showthread.php?t=2083904&page=2189
just flash over what you have now, dont wipe a single thing! make a nandroid backup in recovery if you want
portis said:
Yes i do. Mybe the problem is in me,could you give as a link to 1 kernel for example.Thanks.
Click to expand...
Click to collapse

simms22 said:
trinity kernel, latest, tf4h is the name http://goo.gl/wteFmX
it can be clocked to 1728mhz, but you need a cpu control app for that. its defaulted to 1026mhz when it boots. dont let the 1026mhz scare you, its as quick as many other kernels at 1512mhz
trinity fours xda thread http://forum.xda-developers.com/showthread.php?t=2083904&page=2189
just flash over what you have now, dont wipe a single thing! make a nandroid backup in recovery if you want
Click to expand...
Click to collapse
You might wanna give him TF3 Full instead if he wants to use 4 cores instead of 2, or maybe something like TF133 if he's on 4.2 :good:

Detailed said:
You might wanna give him TF3 Full instead if he wants to use 4 cores instead of 2, or maybe something like TF133 if he's on 4.2 :good:
Click to expand...
Click to collapse
youre right!
for android 4.3
tf3 http://goo.gl/jcWJfK
tf4c is defaulted two cores set as max and min cpu(dual core), tf3 is running all 4 cores
for android 4.2.2
tf133 http://goo.gl/jPK5E
latest and last 4.2.2 kernel tf152 http://goo.gl/CDAGV7

[Q] echorom v3 - overclock cpu

Hey there
so I flashed this rom on my n910f and I'm trying to overclock my cpu via nofrills aND it won't let me overclock more than my 2.65GHZ
What should I do??
Thanks

Help please?

bagiz010 said:
Hey there
so I flashed this rom on my n910f and I'm trying to overclock my cpu via nofrills aND it won't let me overclock more than my 2.65GHZ
What should I do??
Thanks
Click to expand...
Click to collapse
Have you given SuperSu permissions to nofrills ?

Yes!
Here's a screenshot

Simonetti2011 said:
Have you given SuperSu permissions to nofrills ?
Click to expand...
Click to collapse
Maybe I need to install some kernel or something?
I mean I have rom and root access, that isn't enough?
by the way I'm running Android lollipop 5.0.1
Any ideas?

Dorimanx LOLLIPOP kernel {STOCK} Q&A thread

Please use this thread for your questions answers and support
KERNEL THREAD HERE
dorimanx LP Kernels storage here

Does it work on 5.1 or 5.1.1 ROMs?

gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
NO, LG Stock ROM is based on 5.0.2 and this kernel works only on this base.

SREEPRAJAY said:
Please use this thread for your questions answers and support
Click to expand...
Click to collapse
Dorimanx is only for stock

4Freedom said:
Dorimanx is only for stock
Click to expand...
Click to collapse
Is there any difference of opinion or accepting?
The THREAD TITLE says so too.
I think you also need to take care of your signature (image) size my friend

gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
You don't even read one post above yours...

gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
Read man!
Sent from my LG-D802

Can I flash this while using jb bootloader?

defynoob said:
Can I flash this while using jb bootloader?
Click to expand...
Click to collapse
no. will not boot.

what is the best config for best battery
,

seeker07 said:
what is the best config for best battery
,
Click to expand...
Click to collapse
Hi,
Dorimanx has defined profiles for different usage. I would guess that extreme battery profile is the one you are looking for. ( is to be set in the profile tab in stweaks app)

@dorimanx , sorry for ask this, but, wich stock rom did you flash? D? Or B? I can't remember

30B he did..
me too

Kernel compile
Hi,
As I'm curious, I'm trying to compile dorimanx kernel jus to see how all this is working.
So I've pulled three repo (crosstool-ng-by-dorimanx, DORIMANX_LG_STOCK_LP_KERNEL, lp_ramdisk_dorimanx )
when I run ./default_build.sh I have this error:
android-toolchain/bin/arm-eabi-ar: error while loading shared libraries: libfl.so.2: cannot open shared object file: No such file or directory
both libfl-dev i386 and x86_64 are installed on my 14.04 Ubuntu system.
If any of you know what is the problem, please let me know ?

Flashed dori1.2 on 30b Somboons Rom. Dorimanx states "sorry, no kernel support".
Already rebooted, reset to defaults,...

Wimmme said:
Flashed dori1.2 on 30b Somboons Rom. Dorimanx states "sorry, no kernel support".
Already rebooted, reset to defaults,...
Click to expand...
Click to collapse
Had the Same issue, Check if stweaks Has root acess
Spoiler
LG G2 D802
Dorimanx LP Kernel
Stock LP
ViPER4AndroidFX+Poweramp
? ATH-M50x ?

Thank you for excellent kernel. I was so angry because of stock.
What exactly is 'UltraSound high performance audio hardware'? Another tweaks to audio drivers? I must say that sound quality on kitkat dorimanx seems to be better than other kernels.

Lycidias said:
Had the Same issue, Check if stweaks Has root acess
Spoiler
LG G2 D802
Dorimanx LP Kernel
Stock LP
ViPER4AndroidFX+Poweramp
? ATH-M50x ?
Click to expand...
Click to collapse
I don't even have stweaks. Just reflashed 1.2 but still no stweaks. I see synapse is installed. I'll try to remove synapse and reflash
Update: dorimanx app == stweaks.
I am already that long on Aosp i didn't even knew.
It has root access, still no go

maybe delete /data/.dori Folder and reflash kernel..

BaschtlWaschtl said:
maybe delete /data/.dori Folder and reflash kernel..
Click to expand...
Click to collapse
It's working now, tnx

Note 3 N9005 cant overclock processor

Hi guys, fairly new to modding my phone, have tried a few different roms and kernels over the last week, and have sort of settled on cyanogen CM12.1 lolliop 5.1.1. with the kernel that comes with the rom. I've been seeing a few posts/roms that claim its possible to overclock the processor to 2.7ghz now I've tried to install synapse, and stweaks neither of which seem compatible, so I have kernel adiutor installed, but the max frequency it will offer me is 2,3 ghz, am I missing something? can't seem to find any info, can anyone point me in the right direction please

prophotoboy said:
Hi guys, fairly new to modding my phone, have tried a few different roms and kernels over the last week, and have sort of settled on cyanogen CM12.1 lolliop 5.1.1. with the kernel that comes with the rom. I've been seeing a few posts/roms that claim its possible to overclock the processor to 2.7ghz now I've tried to install synapse, and stweaks neither of which seem compatible, so I have kernel adiutor installed, but the max frequency it will offer me is 2,3 ghz, am I missing something? can't seem to find any info, can anyone point me in the right direction please
Click to expand...
Click to collapse
No apps can overclock if the kernel doesn't support the overclock.
Not all phones can can reach so high overclock.
Get arters kernel for cm12.1. Or use cm12.1 by temasek which supports up to 2.5

Thanks for the advise, I'm going to install arters kernel now and see what happens

I installed the arter kernel, and still no overclocking, also reduced my Antutu bench from 45403 down to 3400ish, so gone back to cm12.1 kernel for now. any ideas why I can't increase mas cpu speed?

Maybe it doesn't support till 2.7GHz. Try different kernel
Sent from my SM-N9005

prophotoboy said:
I installed the arter kernel, and still no overclocking, also reduced my Antutu bench from 45403 down to 3400ish, so gone back to cm12.1 kernel for now. any ideas why I can't increase mas cpu speed?
Click to expand...
Click to collapse
Look at the kernel settings.

kenny1991 said:
Look at the kernel settings.
Click to expand...
Click to collapse
Thanks Kenny, how can I do that? and is it possible to change something in the code to make it overclockable?

prophotoboy said:
Thanks Kenny, how can I do that? and is it possible to change something in the code to make it overclockable?
Click to expand...
Click to collapse
What do you see with fauxlock?

kenny1991 said:
What do you see with fauxlock?
Click to expand...
Click to collapse
https://onedrive.live.com/redir?res...87&authkey=!AH4EamXAkgxBxeg&ithint=folder,png

Ok. well I have an update, I flashed the kitkat 4.4 liquid smooth rom yesterday, and that allowed me to overclock the cpu but unfortunatly, even overclocked it was slower than Tamasks cm12.1 rom, I also tried the liquid smooth lollipop rom, but again, it didn't allow me to overclock the cpu, it was faster than the kitkat rom, but still not as fast as the cm12.1 so I've gone back to that for now. Its looking like something to do with the lollipop version of android thats stopping the cpu from being overclocked....

Hm strange