[Q] Cannot create rom slot 1 - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

On 4.4.2 and the 3.72 safestrap when I try to create a rom slot 1 it either halngs about half way, or when I try to install on it It fails to mount system... any ideas?

ok I am an idiot, please ignore this... and if you are in my boat, well it is stated in the thread for safestrap that slots are not supported :/

It happens... No worries
Sent from my SM-N900V using Tapatalk

Ive been able to create slots and install roms on 4.4.2 kitkat I know ot says you cant but ive been able to get stock and slot 1-2 to work
Sent from my SM-N900V using Tapatalk

Oh i got them to create and even install sometimes, but when you try to boot into them you get a "no system" eoror

Morkai Almandragon said:
Oh i got them to create and even install sometimes, but when you try to boot into them you get a "no system" eoror
Click to expand...
Click to collapse
Strange what rom are you flashing on the slots i havent had an issue with any
Sent from my SM-N900V using Tapatalk

Morkai Almandragon said:
Oh i got them to create and even install sometimes, but when you try to boot into them you get a "no system" eoror
Click to expand...
Click to collapse
If you look at the message when you're try to create the slots you'll probably see it saying "unable to mount system" which means it did not create the system partition. You should see the same thing when you try installing the ROM as well. That's why your getting the "no system" error.

From what I fond is that you make the rom slots larger and it will work. The only problem I have found is when you power down or reboot it get stuck in a bootloop and you have to do a battery pull. It will then start the rom slot (1-4) fine. Just not on power downs.

comweasel said:
From what I fond is that you make the rom slots larger and it will work. The only problem I have found is when you power down or reboot it get stuck in a bootloop and you have to do a battery pull. It will then start the rom slot (1-4) fine. Just not on power downs.
Click to expand...
Click to collapse
Thanks for the info, this actually worked for me and I'm now able to create slots again. Off Topic but how have you been a member for almost 4 years and only have 3 posts? lol..

LOL... I joined to root my old Moto Razr when they came back and then I completely for got about this site since I was not into doing custom roms on it. Then I found this again when I got my N3. LOL wish I could just say I am lazy.

comweasel said:
LOL... I joined to root my old Moto Razr when they came back and then I completely for got about this site since I was not into doing custom roms on it. Then I found this again when I got my N3. LOL wish I could just say I am lazy.
Click to expand...
Click to collapse
Well, welcome back.

airmaxx23 said:
Well, welcome back.
Click to expand...
Click to collapse
Thanks.

jolly_roger_hook said:
Ive been able to create slots and install roms on 4.4.2 kitkat I know ot says you cant but ive been able to get stock and slot 1-2 to work
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
So your slot 1 and 2 booted? I was able to create a slot and install a rom, but when I boot into it, it just hangs at black screen. I have to pull the battery to get back to recovery to select main slot. Would be really nice to get a fully working safestrap for KK.

strider5236 said:
So your slot 1 and 2 booted? I was able to create a slot and install a rom, but when I boot into it, it just hangs at black screen. I have to pull the battery to get back to recovery to select main slot. Would be really nice to get a fully working safestrap for KK.
Click to expand...
Click to collapse
Mine boot fine also, are you sure the slots are being created? Are you seeing an "unable to mount system" message when you flash the ROM?

airmaxx23 said:
Mine boot fine also, are you sure the slots are being created? Are you seeing an "unable to mount system" message when you flash the ROM?
Click to expand...
Click to collapse
I never noticed any errors? I tried it a couple times but no joy. I can try again and see if I get any errors. Will report results later. I do know that the dev has stated that 3.72 beta was not capable of installing multiple rom slots, but have heard others with success, so not sure if it is just by chance the few have gotten this to work or what.

strider5236 said:
I never noticed any errors? I tried it a couple times but no joy. I can try again and see if I get any errors. Will report results later. I do know that the dev has stated that 3.72 beta was not capable of installing multiple rom slots, but have heard others with success, so not sure if it is just by chance the few have gotten this to work or what.
Click to expand...
Click to collapse
Also, if it can't mount the system your ROM slots will not be created properly. You can tell if they didn't work by looking at the size of the system partition after creating the slot, if it didn't work it will say 0 (zero). As someone else suggested, if you increase the partition sizes (even by the smallest increment possible) they will get created and work. The only thing I've noticed is that rebooting does not work and requires a battery pull.
Hopefully this helps you.

airmaxx23 said:
Also, if it can't mount the system your ROM slots will not be created properly. You can tell if they didn't work by looking at the size of the system partition after creating the slot, if it didn't work it will say 0 (zero). As someone else suggested, if you increase the partition sizes (even by the smallest increment possible) they will get created and work. The only thing I've noticed is that rebooting does not work and requires a battery pull.
Hopefully this helps you.
Click to expand...
Click to collapse
Sounds good. I would not have thought of increasing the size to force it to take. Not sure what it read after creating as I did not notice. But I will check that as well. Thanks for the advice. Now I have something to play around with this afternoon.:good:

strider5236 said:
Sounds good. I would not have thought of increasing the size to force it to take. Not sure what it read after creating as I did not notice. But I will check that as well. Thanks for the advice. Now I have something to play around with this afternoon.:good:
Click to expand...
Click to collapse
Please post back and let us know how it went.

airmaxx23 said:
Please post back and let us know how it went.
Click to expand...
Click to collapse
Saweeeeet!!! Total success. I wiped the slot and re created it with uping each of the three partitions by one bump. That did not work as the partition size said 0 space available. So I wiped again and just bumped the first two up. That time it took and showed the partition at correct size. I installed Hyperdrive on it and it installed and booted just fine.:good:
Thanks again for the help. Totally stoked that I can test out other roms again without wiping the main slot.

strider5236 said:
Saweeeeet!!! Total success. I wiped the slot and re created it with uping each of the three partitions by one bump. That did not work as the partition size said 0 space available. So I wiped again and just bumped the first two up. That time it took and showed the partition at correct size. I installed Hyperdrive on it and it installed and booted just fine.:good:
Thanks again for the help. Totally stoked that I can test out other roms again without wiping the main slot.
Click to expand...
Click to collapse
Great, I'm glad it worked for you.

Related

0B phone storage, first time set up on every boot?

Well, I was fine up until last night when I went to flash back to a old backup I had after not being pleased with what I had downloaded. That somehow brought me to some odd stock rom, I have no idea how really but I had lost vibration and these issues started. I then used Odin's stock file stock files to get back to what should be stock, but I'm not having both of these problems. Every time my phone boots it runs though the first time setup regardless if I follow though the whole thing or not. I also can not install anything like Rom Manager because my phone has no storage left. My SD card was also formatted at some point while I tried to fix all these issues last night.
At this point I have no idea how to proceed. I've tried rooting and I just get a failed message after my reboot. I'm stuck at this point.
Is this a development question? There are many threads about this issue. Search: use it
Sent from my SCH-I500 using XDA App
wizang said:
Is this a development question? There are many threads about this issue. Search: use it
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I have no idea why I posted this here. Really sorry. I'll delete it in a second, but I have searched several times and none of the fixes I've found work.
yes there are alot of threads with the same problem>
did you install voodoo kernel and did not remove voodoo before reverting back?
http://forum.xda-developers.com/showthread.php?t=804784
also here is the original topic called "FIXED 0.00 internal storage problem". it was several pages in.
itstee said:
yes there are alot of threads with the same problem>
did you install voodoo kernel and did not remove voodoo before reverting back?
http://forum.xda-developers.com/showthread.php?t=804784
Click to expand...
Click to collapse
I believe at this point that is what my problem is. WHen I try to get into CWM I don't have update.zip on my sdcard any more.
sonofskywalker3 said:
also here is the original topic called "FIXED 0.00 internal storage problem". it was several pages in.
Click to expand...
Click to collapse
Thanks for that; I'm working my way though those steps now. I believe I should be rooted well enough soon.
I do not know, however, how I'm suppose to install CWM, or "4. Use cwm to restore the stock.zip (kernel)." and "7. Apply CWM. Wipe data." to remove voodoo.
Also after running the one click root in that thread it ends with several errors and I do not see superuser as an app on my phone, making me assume it didn't work.

[Q] STRANGEST ROM Flashing Symptoms and Issues. CALLING Flash, Recovery, EXPERTS!!!

Dear Friends,
I just bought a Sprint S4, and despite my half a decade experience of flashing custom ROMs and such, I seem to run into a whole lot of issues with this phone that I cannot solve or get past.
So some background first, on what's happened and been done to the phone:
1. Bought the phone (don't recall the original firmware), but Rooted it via the QBKing method.
2. Flashed TWRP 6.1 something from the GooManager
3. Have a Class 10 SD 64Gig SD Card that I formatted via S4, so I assume it's in the ExFat format?
4. Downloaded Sacs, put the ZIP on the SD
5. Booted into TWRP, Wiped, Data, Dalvik, Cache, and System
6. Tried Flashing Sacs ZIP from SD, Errored out: Something like: Flash failed, unable to read the Zip file. And some verbiage for Partition
7. I can't Mount my SD or INTERNAL via Recovery. Can read them from the Recovery file Manager, but nothing shows up on the computer, unrecognized drivers (worked fine for the same phone, later, when it was on, so I know it was the drivers that was the issue)
8. Ran straight for Odin after that, but after trying SEVERAL TARs and etc, the phone would NOT begin flashing with Odin even :'(! (Could still enter Download Mode)
9. After HOURS of trying VARIOUS Odin versions and TARs, I found a One-Click EXE with Odin Packaged with the MDC Rooted firmware this FINALLY brought the phone back to life!!
Now the issues remaining that I need your expert help and advice on:
1. Since the phone coming back to life, I went STRAIGHT for Sacs ROM again! MD5 checked it, everything looked good. Put it both on SD and Internal.
2. Made Backups of the MDC ROM
3. Tried Flashing and ran into the similar error that you saw in Step 6 from the Backgroun
4. Downloaded Stock, DeOdexed MF9 ZIP, downgraded TWRP to a stable version, and tried Flashing again and Step 6 repeated. Tried VARIOUS ROMs this way, same issue. Error flashing, something about Partition, and Couldn't read Zip. All these Zips were MD5 Sum CHECKED!
5. The lack of mounting issue as USB drives from Recovery continues
6. Then a FREAK discovery was, when the ZIP failure occurred, I opted for Flash Dalvik and Cache and tried Installing right after that, and BOOM! Sacs starts Flashing !!!
7. I broke Sacs quick, restoring things from Titanium Backup, and when I tried restoring my latest MDC Backup, it recovered with a black screen and bootloops, and NO recovery entry AGAIN :'(!! (I think I may have backed up Recovery with that Nandroid and restored)
8. So I repeated the One-Click again, the phone restored again... this time in FACTORY MODE :-/?? I ignored, and restored to an older MDC backup, which worked!
9. I downloaded TriForce MF9, this time, tried flashing and failure again with Failed Flashing, error reading Zip. And on and on it goes :'(! I can't run Odins with MF9, I can't flash ROMs, I can't mount my INTERNAL AND SD in Recovery and am just straight bummed :'(!!
I have a few hunches:
- Format SD Card as Fat32, using this one app. But I think you lose 32 gig space from your card, right? Also, why doesn't Internal storage mount from Recovery :-/?
- Maybe a I just have bad or corrupted sectors in my Internal AND External storage devices?
In either case, please treat me as a NOOB, and chime in with your thoughts and experience on what you think could be happening? I appreciate ALL your help in advance, thanks for your time !
I would try a new recovery, I have always had problems with the newer TWRPs, I recommend 2.5.0.2 or CWM
^ that, and do you have to update to mf9 before flashing an mf9 rom? That might be helpful. Are you just dirty flashing rom over rom in your attempts, that could be an issue. Wiping and factory resetting before flashing the Rom may help.
Just tossing out random ideas.
Edit: just realized I missed #5 in the first half. Sorry, and missed the stock deodexed part lol.
Sent from my SPH-L720
xchampx13 said:
I would try a new recovery, I have always had problems with the newer TWRPs, I recommend 2.5.0.2 or CWM
Click to expand...
Click to collapse
Yes Sir, I sure did downgrade TWRP, including the version you mentioned.
HPferoxCraft said:
^ that, and do you have to update to mf9 before flashing an mf9 rom? That might be helpful. Are you just dirty flashing rom over rom in your attempts, that could be an issue. Wiping and factory resetting before flashing the Rom may help.
Just tossing out random ideas.
Edit: just realized I missed #5 in the first half. Sorry, and missed the stock deodexed part lol.
Sent from my SPH-L720
Click to expand...
Click to collapse
Also a yes, Sir. MF9 kept failing, that is, it wouldn't be read by Recovery. Odin would fire the Tar either . No dirty flashing... almost EVER !
Any other ideas, guys ? Desperately need help here !
ProFragger said:
Yes Sir, I sure did downgrade TWRP, including the version you mentioned.
Also a yes, Sir. MF9 kept failing, that is, it wouldn't be read by Recovery. Odin would fire the Tar either . No dirty flashing... almost EVER !
Any other ideas, guys ? Desperately need help here !
Click to expand...
Click to collapse
Why dont you just go to stock mdc and download the update and just do a normal ota?
Take your sd card out and try flashing it from your phones storage
Sent from my SPH-L720 using XDA Premium 4 mobile app
ROMANTiC KiD said:
Why dont you just go to stock mdc and download the update and just do a normal ota?
Click to expand...
Click to collapse
That's one of my plans RomanticKid, but I'm flashed to Page Plus, wondet if the OTA will still work? I get notifications for the updates though, next time I Odin EXE, assuming that also leaves me with stock recovery, I will give it a shot. Thanks for your idea...
churchey thanks for your idea as well, tried it, I get the Zip and fail flash error ! Appreciate all the help guys, keep it coming !
churchey360 said:
Take your sd card out and try flashing it from your phones storage
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just ran into a bunch of problems. Man.. You need to be careful what you flash. Not everything is on the up and up. Steer clear of this website and their firmware. ------> http://galaxys4root.com/galaxy-s4-stock-firmware/ Unless you are intrigued by complex remote spyware. You'll be amazed with the phoney updates that inject things like a note 3 keyboard, Android device manager, and a bogus samsung hub. All of which will show AT THE BOTTOM, NOT THE TOP of your google play "all" list as installed apps.... but not in your installed apps list. They show as installed, but incompatible with your device. Go figure. Somebody had complete control of my device. It took me a minute to figure it out. Then finding a legit source of firmware here. ----->http://samsung-updates.com/device/?id=SPH-L720 I was able to get legit again. But not after encountering the problems you are having. I had to go in and manually delete a few partitions that did not belong and stayed after flashing anything. Once I did that... I flashed the MF9 firmware from samsung.updates.com (the second site I just listed above) and everything is legit now. No phoney updates. No bogus apps. Everything is perfect just like it came when I took it out of the box. Beware.... MANY of these ROM's have b.s. injected into them, and so do some of the firmwares. Take caution bro. I'd be happy to answer any questions if there are any.
Sleepycloud said:
I just ran into a bunch of problems. Man.. You need to be careful what you flash. Not everything is on the up and up. Steer clear of this website and their firmware. ------> http://galaxys4root.com/galaxy-s4-stock-firmware/ Unless you are intrigued by complex remote spyware. You'll be amazed with the phoney updates that inject things like a note 3 keyboard, Android device manager, and a bogus samsung hub. All of which will show AT THE BOTTOM, NOT THE TOP of your google play "all" list as installed apps.... but not in your installed apps list. They show as installed, but incompatible with your device. Go figure. Somebody had complete control of my device. It took me a minute to figure it out. Then finding a legit source of firmware here. ----->http://samsung-updates.com/device/?id=SPH-L720 I was able to get legit again. But not after encountering the problems you are having. I had to go in and manually delete a few partitions that did not belong and stayed after flashing anything. Once I did that... I flashed the MF9 firmware from samsung.updates.com (the second site I just listed above) and everything is legit now. No phoney updates. No bogus apps. Everything is perfect just like it came when I took it out of the box. Beware.... MANY of these ROM's have b.s. injected into them, and so do some of the firmwares. Take caution bro. I'd be happy to answer any questions if there are any.
Click to expand...
Click to collapse
Sorry to hear of your problems brother, indeed, such a pain and disappointing to go through this crap when all you want to do is enjoy the custom ROM goodness . ..
I think the key thing for me to do and understand is cleaning and or deleting partitions that you spoke of... but you'll see, I have so many issues that I keep hitting the wall one way or another . ..
I would LOVE your help if you can make some GTALK time for me?
My address is [email protected]
Appreciate your help in advance!
I just hit you up on hangouts bro.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 01:11 AM ---------- Previous post was at 01:05 AM ----------
I will say this... Your problem could be entirely different than mine. There are other choices besides firmware that will fix many problems. Remapping yhe partitions with PIT files which are also flashed with odin. I wanted to be sure, so I manually deleted partitions, then flashed the good firmware I mentioned above.
Sent from my SPH-L720 using Tapatalk
Sleepycloud said:
I just hit you up on hangouts bro.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 01:11 AM ---------- Previous post was at 01:05 AM ----------
I will say this... Your problem could be entirely different than mine. There are other choices besides firmware that will fix many problems. Remapping yhe partitions with PIT files which are also flashed with odin. I wanted to be sure, so I manually deleted partitions, then flashed the good firmware I mentioned above.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Hey bro... thanks for your request. .. I actually don't like Hangouts and still use Talk so I didn't get any requests . ..
Can I send you a request somewhere? Appreciate your help!
Just send it from talk. I'll get it. Its the same thing. I see you on there and it says message delivered.
Sent from my SPH-L720 using Tapatalk
Sleepycloud said:
Just send it from talk. I'll get it. Its the same thing. I see you on there and it says message delivered.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I never got it man... may I have your Gmail to message you? Thanks!

Safestrap Help!!

Hi guys,
I wiped the stock slot while on slot 1 with Bones ROM. I can't access SS anymore. When I boot my phone, I can't select either recovery or continue from the SS boot screen (touch screen doesn't respond). My phone still boots fine into Bones.
I tried installing SS again, but no luck. Please help
gtmaster303 said:
Hi guys,
I wiped the stock slot while on slot 1 with Bones ROM. I can't access SS anymore. When I boot my phone, I can't select either recovery or continue from the SS boot screen (touch screen doesn't respond). My phone still boots fine into Bones.
I tried installing SS again, but no luck. Please help
Click to expand...
Click to collapse
There are 2 actions about ss.
Install the apk & install recovery which did not work?
aviwdoowks said:
There are 2 actions about ss.
Install the apk & install recovery which did not work?
Click to expand...
Click to collapse
I tried uninstalling and reinstalling the recovery. Still have the same problem
I think you must restore to stock. See my signiture button
aviwdoowks said:
I think you must restore to stock. See my signiture button
Click to expand...
Click to collapse
So I can't wipe the stock slot ever? I don't use stock at all and never will. I'd rather have the extra space, given the phone's limited internal storage
gtmaster303 said:
So I can't wipe the stock slot ever? I don't use stock at all and never will. I'd rather have the extra space, given the phone's limited internal storage
Click to expand...
Click to collapse
You can swap a slot to stock then delete the slot only. See post #2 of my ss rom for example/ steps.
gtmaster303 said:
So I can't wipe the stock slot ever? I don't use stock at all and never will. I'd rather have the extra space, given the phone's limited internal storage
Click to expand...
Click to collapse
No, you can't wipe the stock slot. SS uses the stock boot.img to run the other slots. Also, SS itself is run off of the stock ROM. To get stock back, you're going to need to do a full restore, like Avi already said. There is a way to restore a saved ROM over your stock slot, but you need to recover your phone first.
Sent from my Droid RAZR MAXX HD using xda app-developers app
aviwdoowks said:
You can swap a slot to stock then delete the slot only. See post #2 of my ss rom for example/ steps.
Click to expand...
Click to collapse
RikRong said:
No, you can't wipe the stock slot. SS uses the stock boot.img to run the other slots. Also, SS itself is run off of the stock ROM. To get stock back, you're going to need to do a full restore, like Avi already said. There is a way to restore a saved ROM over your stock slot, but you need to recover your phone first.
Sent from my Droid RAZR MAXX HD using xda app-developers app
Click to expand...
Click to collapse
Learning all this the hard way Thanks a lot guys. You've both been pretty patient or I'm the first noob you've dealt with in a while
gtmaster303 said:
Learning all this the hard way Thanks a lot guys. You've both been pretty patient or I'm the first noob you've dealt with in a while
Click to expand...
Click to collapse
Yeah, we've all learned the hard way. You're asking questions and accepting the advice, that's why we're patient. Some don't do that and that's when people lose patience.

Note 3 System Partition Size Can't Install Rom Slot 1

I have a verizon note 3 and I am trying to load a rom into slot 1 using safestrap. Everytime I try, it fails due to insufficient system space. It also fails to mount the system. I have tried soft and hard resets as well as odin but the sytem size stays the same. The size is 2500mb but only 300mb free. Is it possible to free system space? Would removing and reinstalling the OS help? Any suggestions would be great.
njsges said:
I have a verizon note 3 and I am trying to load a rom into slot 1 using safestrap. Everytime I try, it fails due to insufficient system space. It also fails to mount the system. I have tried soft and hard resets as well as odin but the sytem size stays the same. The size is 2500mb but only 300mb free. Is it possible to free system space? Would removing and reinstalling the OS help? Any suggestions would be great.
Click to expand...
Click to collapse
To get best results flash over stock rom but do a nano first.
the_rooter said:
To get best results flash over stock rom but do a nano first.
Click to expand...
Click to collapse
How do I flash over the stock, it does not let me do it. I'm using safestrap 3.72.
njsges said:
How do I flash over the stock, it does not let me do it. I'm using safestrap 3.72.
Click to expand...
Click to collapse
Check out this thread here from the great @az_biker. Step by step instructions, and be sure to hit THANKS.

Phone wont boot Into System

Hey there. I was wondering if anyone could help me out. I was running CM 13 on my Nexus 6P for a while but then I kept getting this message that said that there was something wrong internally and that I should contact the manufacturer. I just ignored it. I decided to download the latest nightly and try to freshly install it. I did a full wipe and installed the new CM13 nightly (7-1) and then gapps. When I tried booting the phone up it wouldnt go into the system. I went back into the recovery and tried installing a back up. I did that and tried booting up again into that restored backup and stilled didnt work. So I'm stuck right now with a non working phone. My bootloader is unlocked if that helps any.
XAL2 said:
Hey there. I was wondering if anyone could help me out. I was running CM 13 on my Nexus 6P for a while but then I kept getting this message that said that there was something wrong internally and that I should contact the manufacturer. I just ignored it. I decided to download the latest nightly and try to freshly install it. I did a full wipe and installed the new CM13 nightly (7-1) and then gapps. When I tried booting the phone up it wouldnt go into the system. I went back into the recovery and tried installing a back up. I did that and tried booting up again into that restored backup and stilled didnt work. So I'm stuck right now with a non working phone. My bootloader is unlocked if that helps any.
Click to expand...
Click to collapse
Have you tried flashing a factory IMG?
Sent from my Nexus 6P using XDA-Developers mobile app
XAL2 said:
Hey there. I was wondering if anyone could help me out. I was running CM 13 on my Nexus 6P for a while but then I kept getting this message that said that there was something wrong internally and that I should contact the manufacturer. I just ignored it. I decided to download the latest nightly and try to freshly install it. I did a full wipe and installed the new CM13 nightly (7-1) and then gapps. When I tried booting the phone up it wouldnt go into the system. I went back into the recovery and tried installing a back up. I did that and tried booting up again into that restored backup and stilled didnt work. So I'm stuck right now with a non working phone. My bootloader is unlocked if that helps any.
Click to expand...
Click to collapse
What options did you select when creating and restoring your backup? And, as above, have you tried flashing the factory images?
Heisenberg said:
What options did you select when creating and restoring your backup? And, as above, have you tried flashing the factory images?
Click to expand...
Click to collapse
I actually just did that. All is well. I was having trouble with fastboot commands because my phone wasnt being recognized but i just googled nexus 6p drivers installed them again and ran through the fastboot commands to get my phone back to stock.
XAL2 said:
I actually just did that. All is well. I was having trouble with fastboot commands because my phone wasnt being recognized but i just googled nexus 6p drivers installed them again and ran through the fastboot commands to get my phone back to stock.
Click to expand...
Click to collapse
Cool, glad you got it worked out. With your backup you may have selected the wrong options, have a look in my guide, there's a section dedicated to backups.
Heisenberg said:
Cool, glad you got it worked out. With your backup you may have selected the wrong options, have a look in my guide, there's a section dedicated to backups.
Click to expand...
Click to collapse
I actually have a question about that. When you say check vendor boxes are we supposed to check them both or just the vendor box and not the vendor image box to backup?
XAL2 said:
I actually have a question about that. When you say check vendor boxes are we supposed to check them both or just the vendor box and not the vendor image box to backup?
Click to expand...
Click to collapse
Only the ones that I mention, leave the system image and vendor image boxes alone.
Heisenberg said:
Cool, glad you got it worked out. With your backup you may have selected the wrong options, have a look in my guide, there's a section dedicated to backups.
Click to expand...
Click to collapse
Heisenberg said:
Only the ones that I mention, leave the system image and vendor image boxes alone.
Click to expand...
Click to collapse
Noted for sure. Thank you for your help. Oh hey can you answer one question for me though? When I was running CM13 how come I always got that alert that something internal was messed up and that I should contact my manufacturer? Also how come when I tried to do a clean install it wouldn't boot? Like that confuses me a lot because it was a clean install but I ran into problems.
XAL2 said:
Noted for sure. Thank you for your help. Oh hey can you answer one question for me though? When I was running CM13 how come I always got that alert that something internal was messed up and that I should contact my manufacturer? Also how come when I tried to do a clean install it wouldn't boot? Like that confuses me a lot because it was a clean install but I ran into problems.
Click to expand...
Click to collapse
Perhaps you had the wrong vendor image installed? Other than that I'm not sure. As for why the clean flash didn't boot I'm not sure either, there could be multiple causes for that so it's a bit hard to narrow down.
Heisenberg said:
Perhaps you had the wrong vendor image installed? Other than that I'm not sure. As for why the clean flash didn't boot I'm not sure either, there could be multiple causes for that so it's a bit hard to narrow down.
Click to expand...
Click to collapse
Oh man who knows. Thank you again though for the help and answering to quickly! Also thank you for that guide! Saved my phone's life. Lol
XAL2 said:
Oh man who knows. Thank you again though for the help and answering to quickly! Also thank you for that guide! Saved my phone's life. Lol
Click to expand...
Click to collapse
No probs, happy to help.

Categories

Resources