Database Users

screen flickering

got this phone about a month now and its amazing...but there is one thing that i just keep bugging me....its like that i can see screens refresh rate! mostly noticeable on gray area of the pic/anything else, weather screen for example, where goes from lighter to darker scale. cant describe it preciselly, it hard to notice if u dont look carefully, its like that brightness is shaking, waving or whatever. i didnt notice it before(maybe i didnt pay atention) but since i did its just iritating....and im starting to worry seriously. help pls

Im looking at mine and i gotta say i dont see the same. Is it possible you have auto brightness on? (settings, sound display, brightness) Under certain lighting conditions (fluorescent) ive noticed it rapidly change from one brightness level to another and back.

nah, it has nothing to do with brightness settings...its just like refresh rate

Brightness adjustment fail

I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.

aznsHD2 said:
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
Click to expand...
Click to collapse
The LCD still light up but very dim, so try going into a dark room and wake up the phone. Then you will be able to see the contain on your phone.

10507 said:
The LCD still light up but very dim, so try going into a dark room and wake up the phone. Then you will be able to see the contain on your phone.
Click to expand...
Click to collapse
no its literally black, i cant see anything.

aznsHD2 said:
no its literally black, i cant see anything.
Click to expand...
Click to collapse
Not even in a totally dark room?

10507 said:
Not even in a totally dark room?
Click to expand...
Click to collapse
Like i said it is BLANK. seriously blank. its not dim or nothing.
Is there a way to restore the brightness on here, because i cant see anything im doin on it.

what you can try to do is, grab a friends phone and try to immitate the same touches on both devices, the best way to do it is by unlocking it, pressing the menu key, click on the corner to make sure u go to the settings, scroll all the way up and find your way to "display" tipically the 4th (or 5th in my case because i have cyanogen mod) and brightness (should be the one at the top) and just try to drag ur finger from left to right to increse it (as it should over pass any 3rd party app) and see if it works, but..... keep in mind these things dependeding on what phone you use to guide you....
screen size
DPI scale
sense??? or not! as settings are different
and other things, also..... when you unlock it make sure its on the home screen
i also believe if you go outside you can see the screen a little bit under the sun, but not completely sure
hope this helps, oh and by the way, if you have a build based on sense go to a sprint store and use an EVO lol, or if u have stock froyo grab a nexus one from a friend and use that (but like i said before, keep in mund the screen size)

yea thats what i was tryin to do. no luck.

I had this problem twice and rejoice, I have a solution!
Simply download "DroidExplorer" for windows.
Boot your phone in android.
Once booted (when your screen turns black), plug in USB, and launch DroidExplorer.
In DroidExplorer, look for the "Screencast" icon (little android icon).
Run that, you will see your screen. Reset brightness to a normal level.
You are saved

aznsHD2 said:
I installed a battery booster app from the market, and it had an option to dim the screen, it was on 11%, well i tried to adjust it, and i guess i went way to far and it turned my screen black, i cant see nothing.
im on the Darkstone build.
is there a way to either delete that app or what, i know the phone works as i feel the vibration from me sliding it to unlock from home screen.
Click to expand...
Click to collapse
When this happens, try shining a bright light on the screen, make sure the device is woken up (i.e. press a hard button) and view your screen from different angles. Even if the backlight is completely off, the LCD display is still active and the graphics elements just about visible.
With this method, you should be able to make enough of your screen to navigate to the brightness settings.
Screencast in Droid Explorer (for your PC) is also a good last measure.
Most apps that control brightness has this problem on HD2, so be careful about going too low in all of them. In Tasker, for example, 30 is the lowest setting that works.
Even the standard screen dimming that occurs a few seconds before screen timeout is not calibrated correctly. In all Android builds/kernels I have tried, the backlight is turned off when it should be just dimmed. Cyanogen(mod) has a setting for the dim level, but the maximum you can use is 26, which still turns off the backlight.
Curiously, sometimes (very seldom) after waking my phone up from standby, the backlight is in a much dimmer state than usual. When sliding the standard brightness from min to max, the actual brightness range varies from barely visible (but still on) to the regular dimmest level. So the device *can* support incredibly dim levels, but I've have found no way of getting into this state predictably. It has happened only 3-4 times over the past 2 months. A reboot fixes it, but I've also gotten out of this state after a locking/unlocking cycle.
So there seems to be several layers to the backlight brightness:
- the actual hardware (which supports much lower brightnesses than we're usually allowed access to)
- the Android API (which probably is the layer turning backlight off below 30, and which occasionally is fooled into using a much dimmer range than usual)
- whatever app providing the GUI (usually showing a range of 0-100% or 0-255).
Does anyone know if there's a reason for the threshold? Is it somehow risky for the LCD display hardware to be very dim?

[Q] Email screen flash?

just wondering what people think about this - im finding whenever I open my email the screen flashes bright for half a second and then dims down. anyone know why this is? is it design? a glitch? power surge? is the brightness limited to save power? (if so where is the diagnostic setting to change it ?)
it does it even on full brightness.
just seems a little weird is all!

That's because of the Amoled-screen.
When displaying a bright white background, the power consumption of the AMOLED-screen goes through the roof. Therefore, whenever a large white area is detected, the screen brightness is automatically decreased.
It's not just in the EMail-application but always when the background is white.

Alliance rom screen dimming issue

Running the Alliance rom, clean install on stock slot. No other major issues that I can think of. I've got it set to maximum brightness, not on auto dimmer. When the screen dims after 30 seconds or so, when its about to turn off due to inactivity, half the time when I tap the screen, it recovers to full brightness. The other half the time, it gets a little brighter than the dim mode, but not much. It stays way dimmer than the full brightness setting that I keep it on. I have to pull the notification bar down, slide the dimmer down, and back up to maximum, and I'm good to go until the next time it does it. Which could be in 30 seconds when it dims again.
Anybody else having this issue?

scott_65 said:
Running the Alliance rom, clean install on stock slot. No other major issues that I can think of. I've got it set to maximum brightness, not on auto dimmer. When the screen dims after 30 seconds or so, when its about to turn off due to inactivity, half the time when I tap the screen, it recovers to full brightness. The other half the time, it gets a little brighter than the dim mode, but not much. It stays way dimmer than the full brightness setting that I keep it on. I have to pull the notification bar down, slide the dimmer down, and back up to maximum, and I'm good to go until the next time it does it. Which could be in 30 seconds when it dims again.
Anybody else having this issue?
Click to expand...
Click to collapse
I have the same thing happening. Personally I have been too lazy about it to check through settings to see if I've done something. I'll check on it and see if I can find a fix.
*Update*
I've checked through all my settings and can find nothing that might cause it. I don't have Auto Brightness set, nor do I have Auto Adjust Screen Tone turned on. I saw nothing in the Alliance Settings either. I believe it is a system setting that is probably buried in code somewhere (far beyond my knowledge).
**Update** I reported the bug in the Alliance Forum.

I tend to agree. I've looked through settings, etc. just as you have, to no avail. I'm nearly certain it's done it since install, so I don't think it's something that I've changed. But I could be wrong. I've also tried it with auto adjust turned on, does the same thing. Auto adjusts to a dimmer setting sometimes

Nightclick & LCD vs AMOLED

Last night, I went to use my night clock app with my new LG v20. On my Note 7, the screen was totally 100% black except for the numbers.
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
(Note, this includes the 2nd screen which was also lit - and I had the brightness at 0%).
--
BTW, this may need to be a separate thread - on my phone I notice that the auto-brightness tends to be too dark. Any way I can adjust it to be brighter when in auto mode, or should I just go to manual ?

polstein said:
Last night, I went to use my night clock app with my new LG v20. On my Note 7, the screen was totally 100% black except for the numbers.
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
(Note, this includes the 2nd screen which was also lit - and I had the brightness at 0%).
--
BTW, this may need to be a separate thread - on my phone I notice that the auto-brightness tends to be too dark. Any way I can adjust it to be brighter when in auto mode, or should I just go to manual ?
Click to expand...
Click to collapse
Try turning off second screen and see what your results are.. Second screen has a seperate black light that slightly bleeds out to the rest of the screen. It was horrible on the V10 but much improved on the 20..

Swizzle82 said:
Try turning off second screen and see what your results are.. Second screen has a separate black light that slightly bleeds out to the rest of the screen. It was horrible on the V10 but much improved on the 20..
Click to expand...
Click to collapse
The night clock app has the option to turn off the notification, which also turns off the 2nd screen.
...oops. It did, until I followed your suggestion in the other thread about the more setting to enable time/date when in full screen or notification bar hidden. I'll have to get into the habit of turning *off* the more setting at night.
(Either way, doesn't help with the slight gray background color. I can probably just get used to it as long as I'm not damaging the screen by having it slightly on all night. I need to google if LCD screens have burn in problems I guess.)
--
Maybe I should just start pm'ing you all my questions

polstein said:
Last night, I went to use my night clock app with my new LG v20. On my Note 7, the screen was totally 100% black except for the numbers.
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
(Note, this includes the 2nd screen which was also lit - and I had the brightness at 0%).
--
BTW, this may need to be a separate thread - on my phone I notice that the auto-brightness tends to be too dark. Any way I can adjust it to be brighter when in auto mode, or should I just go to manual ?
Click to expand...
Click to collapse
I use this on all my phones since I feel stock auto is too dim. https://play.google.com/store/apps/details?id=com.velis.auto.brightness
polstein said:
The night clock app has the option to turn off the notification, which also turns off the 2nd screen.
...oops. It did, until I followed your suggestion in the other thread about the more setting to enable time/date when in full screen or notification bar hidden. I'll have to get into the habit of turning *off* the more setting at night.
(Either way, doesn't help with the slight gray background color. I can probably just get used to it as long as I'm not damaging the screen by having it slightly on all night. I need to google if LCD screens have burn in problems I guess.)
--
Maybe I should just start pm'ing you all my questions
Click to expand...
Click to collapse
Sent from my LG-H830 using Tapatalk

Use comfort view on low or medium. Will help lower the ~9000K color temp some and help blacks a hair. Faint glow is typical on LCDs. Higher quality LCDs and higher quality led's can help. Lg skimped here. Sucks they didn't even give us color modes to pick from. The colors are waaay off. But using comfort view dims the blue pixels and helps considerably.

polstein said:
On the v20, the entire screen was stil lit - faint, but clearly still lit up in a light light grey.
Is this just how an LCD screen works, or is there something I have to do in order to get the rest of the screen to go off.
Click to expand...
Click to collapse
That's just how LCD works, they need CCFL or LED back light to lit up the screen, it's not possible for it to be completely black while turned on. With AMOLED the individual pixels can turn off itself which is why the black are blacker on them. OLED screens also have very high refresh rates which eliminates flickering, this is good for people who are concerned with eyes health.

Lcd doesn't get burn in, but it can get ghost image retention. It was f***ing horrible by the end of my V10 usage.. Never had the problem on the G2 3 or 4. Just the V10, even after factory resetting.

Swizzle82 said:
Lcd doesn't get burn in, but it can get ghost image retention. It was f***ing horrible by the end of my V10 usage.. Never had the problem on the G2 3 or 4. Just the V10, even after factory resetting.
Click to expand...
Click to collapse
Had the same issue my V10, that is my biggest V20 concern. . My v10 was not even a year old.
I get the engineering and cost reasoning, but not sure I like the lcd screens.