[Q] HELP! Updated Telus S4 wifi not working - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I hastily went for the latest update provided by Telus May 17th 2014 and everything said it worked but my wifi doesn't work (can't turn it on) the button just reverts immediately back to off. I could sure use a little help from the Gurus here on xda developers. I should say that the system was rooted and knox was disabled. I lost root as always after the update but was able to redo it and have it again.System still reports that it is 4.4.2 which it was before the update.

Touch_Pete said:
I hastily went for the latest update provided by Telus May 17th 2014 and everything said it worked but my wifi doesn't work (can't turn it on) the button just reverts immediately back to off. I could sure use a little help from the Gurus here on xda developers. I should say that the system was rooted and knox was disabled. I lost root as always after the update but was able to redo it and have it again.System still reports that it is 4.4.2 which it was before the update.
Click to expand...
Click to collapse
Try to download the firmware again on Sammobile and install that manually, can also try to flash model through recovery might help.

chuson1220 said:
Try to download the firmware again on Sammobile and install that manually, can also try to flash model through recovery might help.
Click to expand...
Click to collapse
Worked like a charm! Thanks!!!

Touch_Pete said:
Worked like a charm! Thanks!!!
Click to expand...
Click to collapse
No Problem! Nice to help a fellow Canadian out!!

Related

Rooted

So im rooted my xperia play r800i. Got 3.0.A.2.184 2.3.2
How can i update to 2.3.3?
Check the Development section for more info.
http://forum.xda-developers.com/forumdisplay.php?f=1093
SirArt89 said:
So im rooted my xperia play r800i. Got 3.0.A.2.184 2.3.2
How can i update to 2.3.3?
Click to expand...
Click to collapse
If you have a locked bootloader then you can have a look at this post http://forum.xda-developers.com/showthread.php?t=1116090
I used this method and now have rooted 2.3.3
I think I'm going to root this weekend. Has anyone from Rogers rooted and went to 2.3.3 rooted? I have an R800a model. I have to uninstall stuff all the time because it won’t use the SD card. I can't even open Google Talk when the memory is low.
ncaissie said:
I think I'm going to root this weekend. Has anyone from Rogers rooted and went to 2.3.3 rooted? I have an R800a model. I have to uninstall stuff all the time because it won’t use the SD card. I can't even open Google Talk when the memory is low.
Click to expand...
Click to collapse
Check this thread. http://forum.xda-developers.com/showthread.php?t=1119074&highlight=rogers
He had rogers. Rooted it on 2.3.2 and then upgraded to 2.3.3 still retaining the root. Though i am not on rogers but this root method worked for me too.
afflux_ashish said:
Check this thread. http://forum.xda-developers.com/showthread.php?t=1119074&highlight=rogers
He had rogers. Rooted it on 2.3.2 and then upgraded to 2.3.3 still retaining the root. Though i am not on rogers but this root method worked for me too.
Click to expand...
Click to collapse
Thanks but there is no update in Canada yet. I'll ask him how he did it.
ncaissie said:
Thanks but there is no update in Canada yet. I'll ask him how he did it.
Click to expand...
Click to collapse
If you flash UK generic rom as he did, the phone will look for a UK update and not the one for canada. So you will be able to update OTA.
Help please guys..
OK, so I did the PC update to 2.3.3. Didn't like it without root
So I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
thanks in advance
ncaissie said:
Thanks but there is no update in Canada yet. I'll ask him how he did it.
Click to expand...
Click to collapse
If you checked the development section of the ....
[Rogers]Rooted 2.3.3 via Xperia_Play_Release_Generic_UK
It's the same method as the other thread, just edited for clarity.
nelly_boy said:
OK, so I did the PC update to 2.3.3. Didn't like it without root
So I used the above processes to get back to 2.3.2. All good but data dont appear to be working. Phone calls everything else is fine. Data is enabled but I never get G H or E in the status bar.
Any ideas? Do I neeed to get onto wifi to download carrier settings?!?!
thanks in advance
Click to expand...
Click to collapse
This is also explained in my thread
step 1./ google your carriers apn settings
step 2./ enter them in settings/wireless & networks/mobile network settings/Access Point Names
step 3./ Profit
I've added this to my original thread in the dev section
Hi, Got it working thanks. your the best!!!
Am scared to ask this but, have gingerbreaked fine but wen I try to update over the air. downloads fine, then does the install via the four coloured boxes. then stoops and says. Unable to update.
Any ideas? very sorry if I have missed this in your other thread.
thank you so much for your help
fyi, I am in the UK and am sure we can update. I installed nothing other than gingerbreak then went staight to update ota
nelly_boy said:
Hi, Got it working thanks. your the best!!!
Am scared to ask this but, have gingerbreaked fine but wen I try to update over the air. downloads fine, then does the install via the four coloured boxes. then stoops and says. Unable to update.
Any ideas? very sorry if I have missed this in your other thread.
thank you so much for your help
fyi, I am in the UK and am sure we can update. I installed nothing other than gingerbreak then went staight to update ota
Click to expand...
Click to collapse
You have a locked bootloader I'm assuming?
Not exactly sure why this is happening for you but this is exactly what would happen with my phone before I flashed to the uk generic firmware. I was thinking it had something to do with some removed SE software (was rooted). I would probably try starting fresh and flashing the Xperia_Play_Release_Generic_UK.ftf with flashtool, root with gingerbreak and then try ota update again. As soon as I did this OTA update went through without a problem. I'm just guessing that maybe you're running a carrier specific firmware vs the generic UK. I've flashed my phone multiple times with that firmware and flashtool and never had a problem (until I do something stupid and have to reflash ). Updates are not region specific but carrier/firmware(which is provided by your carrier so same thing ...) specific. This isn't your problem of course, just saying rogers firmware will only poll rogers for ota updates, the same with other providers firmware. You might want to take a look at this post though http://forum.xda-developers.com/showpost.php?p=14726176&postcount=41 hope it helps
thanks for responding...
thinking about it, I may have caused it. After doing the generic Uk flash. The last message said on the flash tool said to. enable debugging and reconnect.
I then pressed the root button, but it did not work. Stupid as this was for the x10 I think. Guessing maybe this changed something that causes the ota to fail.
I will just have to start from scratch.
thanks agin for your expert advice.

[OTA Captured] German Retail 4.4.4

OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Download:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Were you on stock recovery but rooted when you got this OTA?
I got this Update today too.
BaghiXDA said:
Were you on stock recovery but rooted when you got this OTA?
Click to expand...
Click to collapse
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
I'm also getting the update in The Netherlands. Bought my phone online amazon.de :laugh:
patient81 said:
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
Click to expand...
Click to collapse
Here you go. Obviously remove the .txt extension.
Bec de Xorbin said:
Here you go. Obviously remove the .txt extension.
Click to expand...
Click to collapse
Thank you kindly.
drfr said:
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Currently uploading it ....
Here we go:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Click to expand...
Click to collapse
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
NextGenGTR said:
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
Click to expand...
Click to collapse
Well, I can, but can you tell me why are you asking?
I'm rooted and installed the stock recovery then tried doing the Ota (I'm on stock rom if it matters) and it gives an error, just "error" no more information during the installation process.
Anybody can help?
Sent from my XT1032 using XDA Free mobile app
./.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Yes, you have the right version of firmware for this OTA, don´t know why it´s failing for you, there´s too much variables, it´s hard to tell.
As to where the file I posted comes from - it´s right from my phone. Until today morning I was on French 4.4.4, then I flashed the German 4.4.2 firmware to look if I could catch the OTA and it really came, I pulled it from my /cache and posted here. Check out the MD5 sum: d289331e52d0f79d2bcc4b9b390ff338
It´s the same on my local copy, on the cloud copy I posted and also look here:
http://www.android-hilfe.de/7843052-post301.html
drfr said:
Well, I can, but can you tell me why are you asking?
Click to expand...
Click to collapse
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
NextGenGTR said:
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
Click to expand...
Click to collapse
I see, so mine is 3549.
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
drfr said:
I see, so mine is 3549.
Click to expand...
Click to collapse
loungedogg said:
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
NextGenGTR said:
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
Click to expand...
Click to collapse
Why so sceptical? Apart from a different dialer GUI, there´s not much difference you can really feel on 4.4.4, basically there are just some bug fixes.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
my phone:
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Perhaps you need to uninstall and remove the modules and the xposed from the system before updating. Xposed and the modules add / modify system files and other sources in the device. Make sure you unroot as the last step as well. Stock recovery is required to install the OTA successfully
drfr said:
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Click to expand...
Click to collapse
I just wanted to know, did you also had stock recovery or custom?

SM-T320 March 2015 Firmware Upgrade

I've just installed the latest firmware for the TabPro 8.4; KOT49H.T320XXUBOC1. Disappointingly, it's still 4.4.2 which makes me wonder if we'll ever see a L-pop upgrade. I've only been running it for a half-hour or so but can't notice any difference. I'll report back if there any major problems.
horseycraze said:
I've just installed the latest firmware for the TabPro 8.4; KOT49H.T320XXUBOC1. Disappointingly, it's still 4.4.2 which makes me wonder if we'll ever see a L-pop upgrade. I've only been running it for a half-hour or so but can't notice any difference. I'll report back if there any major problems.
Click to expand...
Click to collapse
IPTV or torrent tv, normally plays through mx player ?. Was a bug, half of the screen black
http://forum.xda-developers.com/app...f-screen-black-watching-t3017829#post58842303
That firmware is just for the UK, which I believe went to NI1 last fall about a month before the U.S. went to NK1.
I don't know that I'd read a lot into it. If anything, they could be getting UK firmware better aligned with other locations for a smoother universal upgrade to 5.
Edit: Okay, looks like it's indeed out now for the U.S., too. Still hoping it's progress towards a Lollipop upgrade.
So does anyone actually know what changes this update brought? I was having some issues with my tab pro 8.4 missing touches, i 1st noticed it during gaming but was able to replicate it with display tester multitouch test.
It seems to be fine now, i thought for sure it was a hardware defect but now I'm not so sure. Anyone else in a similar position as me?
Hey there
I m downloading it, but not sure i will apply it .. does it makes root going byebye ? Wanna stay with my device rooted !
thanks
I just downloaded and installed in California. Still 4.4.2 no issues so far.
Sent from my SM-T320
+1. Got excited over nothing.
johna2u said:
I just downloaded and installed in California. Still 4.4.2 no issues so far.
Sent from my SM-T320
Click to expand...
Click to collapse
Rooted device? Able to root after update?
Thx
Just finished updating and was very disappointed that it's still 4.4.2, I didnt check this forum beforehand so was hoping for a nice surprise.
I hope we see official 5.0 for our devices...
Still. Nothing here! Will we ever get lollipop?
biroot said:
Rooted device? Able to root after update?
Thx
Click to expand...
Click to collapse
Without thinking I took the update and lost root. So, I'm searching to see if root is available for the update.
Rooted T320UEU1AOC1
66gt350 said:
Without thinking I took the update and lost root. So, I'm searching to see if root is available for the update.
Click to expand...
Click to collapse
I rooted with Chainfire"s CF-Auto-Root for Odin. download.chainfire.eu/383/CF-Root/CF-Auto-Root/CF-Auto-Root-mondrianwifi-mondrianwifixx-smt320.zip (For T320). Main web page here autoroot.chainfire.eu/. As you know To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! So don't forget http//:
Rooted i747 said:
I rooted with Chainfire"s CF-Auto-Root for Odin. download.chainfire.eu/383/CF-Root/CF-Auto-Root/CF-Auto-Root-mondrianwifi-mondrianwifixx-smt320.zip (For T320). Main web page here autoroot.chainfire.eu/. As you know To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding! So don't forget http//:
Click to expand...
Click to collapse
Thanks for the quick reply. Reading on the main page, did using the Chainfire's CF-Auto-Root trip the Knox Counter and the custom firmware counter?
thanks
A little bit less lag going from TW to Magazine tiles. Tried removing them with no luck. Hopefully this update sets us up for lollipop.
Sent from my HTC One mini using XDA Free mobile app
66gt350 said:
Thanks for the quick reply. Reading on the main page, did using the Chainfire's CF-Auto-Root trip the Knox Counter and the custom firmware counter?
thanks
Click to expand...
Click to collapse
It trips knoxs
Ported Note 4 on 3
Anyone try use towelroot method to root T320 without trip knox?
>flashing old kernel
>run towelroot
>flash new kernel again
M4r10 22 said:
Anyone try use towelroot method to root T320 without trip knox?
>flashing old kernel
>run towelroot
>flash new kernel again
Click to expand...
Click to collapse
I'm in the process of trying to line up everything to do this. My update that pushed through took me to T320UEU1AOC1. I haven't located the extracted US kernel file for that and unfortunately don't know how to pull it from my current build. Sammobile has an AOC1 file noted as Cellular South and the build time is same date as mine but different timestamp. Anyone know if that would work to get me back to my current build and keep my US region?
horseycraze said:
I've just installed the latest firmware for the TabPro 8.4; KOT49H.T320XXUBOC1. Disappointingly, it's still 4.4.2 which makes me wonder if we'll ever see a L-pop upgrade. I've only been running it for a half-hour or so but can't notice any difference. I'll report back if there any major problems.
Click to expand...
Click to collapse
How did you do this? I have mine rooted and have TWRP but can't figure out how to get that stupid Touchwiz back. Any help would be great
---------- Post added at 02:25 AM ---------- Previous post was at 01:27 AM ----------
horseycraze said:
I've just installed the latest firmware for the TabPro 8.4; KOT49H.T320XXUBOC1. Disappointingly, it's still 4.4.2 which makes me wonder if we'll ever see a L-pop upgrade. I've only been running it for a half-hour or so but can't notice any difference. I'll report back if there any major problems.
Click to expand...
Click to collapse
Could you put the steps I need in order to what you did here?
I have the Romanian version of the updated ROM on a T325.
The biggest issue I have noticed is with the light sensor, with the previous ROM the auto setting worked smoothly, now with the new ROM the screen doesn't fade continuously. Whenever I turn on the screen the brightness just switches from a higher to a lower setting or inversely (without smooth fading and with lag), also the screen flickers horribly when it detects a change so I can't use the auto anymore.
The second issue is with the Samsung keyboard with learning disabled, in a Facebook floating chat window I tried to respond to someone and the keyboard would auto complete with empty words and after every word I had to delete the word before to be able to write the next word. I had to re-enable the learning to get rid of this very annoying problem.
I will try to downgrade to the previous ROM and root it with towelroot and say goodbye to any future official Samsung updates. Samsung has the ****tiest update developers, actually I had the same problem with the auto light setting (but not so serious) with the ROM which was before the good one.
By the way, if Lollipop comes DON'T UPGRADE. Lollipop on S5 sucks bigtime, the phone has major issues, android eats more battery than the screen.
Stick with the previous ROM, for me it was the most flawless one. I might try a cache wipe on the current ROM but I doubt it has anything to do with the screen flickering.
M4r10 22 said:
Anyone try use towelroot method to root T320 without trip knox?
>flashing old kernel
>run towelroot
>flash new kernel again
Click to expand...
Click to collapse
stormygal said:
I'm in the process of trying to line up everything to do this. My update that pushed through took me to T320UEU1AOC1. I haven't located the extracted US kernel file for that and unfortunately don't know how to pull it from my current build. Sammobile has an AOC1 file noted as Cellular South and the build time is same date as mine but different timestamp. Anyone know if that would work to get me back to my current build and keep my US region?
Click to expand...
Click to collapse
After losing root when I took the T320UEU1AOC1 update, I was able to flash the T320 kernel in this thread then use Towelroot again. I did have to reboot, even though it told me I wouldn't need to. I uninstalled and reinstalled SuperSU (hit cancel when I got the SuperSU notice about Knox) and verified root with Root Checker Basic. Then installed the AOC1 kernel. I still have root and Knox is not tripped. (KNOX KERNEL LOCK: 0x0; KNOX WARRANTY VOID: 0x0)

[update] G930TUVU3APG1 firmware available

It seems a new update is about to roll out. The build is BG1.
Maybe just a security patch containing update, but the thing is, the odin TAR is available already.
→ Download S7 firmware
Have fun!
Was available for the s7, but not the edge for me.
When I click download I just get a blank folder with them name of the firmware. How can I get the actual firmware or am I doing something wrong?
Hgatica99 said:
When I click download I just get a blank folder with them name of the firmware. How can I get the actual firmware or am I doing something wrong?
Click to expand...
Click to collapse
G930TUVU3APG1_CL8439036_QB10212948_REV02_user_low_ship_MULTI_CERT.rar
muniz_ri said:
G930TUVU3APG1_CL8439036_QB10212948_REV02_user_low_ship_MULTI_CERT.rar
Click to expand...
Click to collapse
Thanks so much for the link but quick question, how come this ones 1.8 gigs but the one off sammobile is 2.1 gigs?
Hgatica99 said:
Thanks so much for the link but quick question, how come this ones 1.8 gigs but the one off sammobile is 2.1 gigs?
Click to expand...
Click to collapse
I believe that sammobile uses .zip compression. I compressed the 5 files using .rar
muniz_ri said:
I believe that sammobile uses .zip compression. I compressed the 5 files using .rar
Click to expand...
Click to collapse
Which csc do I flash? the Home one or the other?
Has anyone with root tried this update?
hella356 said:
Has anyone with root tried this update?
Click to expand...
Click to collapse
I flashed the latest firmware and was able to root it and install xposed and other mods.
Hgatica99 said:
I flashed the latest firmware and was able to root it and install xposed and other mods.
Click to expand...
Click to collapse
Thanks! Do you feel like there's any performance/stability advantages to the PG1 update?
hella356 said:
Thanks! Do you feel like there's any performance/stability advantages to the PG1 update?
Click to expand...
Click to collapse
I rooted using a custom script someone made in the att thread. It fixed the cpu frequencie issues and adjusted each governor of the small and big clusters. So far so good with only minot hiccups once in a while. I haven't noticed much of a difference with the pg1 firmware if any. If you need help rooting check out the att forum or i can help when i get back home.
if we are already rooted on PD8, can we just flash this ontop of PD8 and retain root? What about user data?
I got this update on 2 S7's and on both of them, I now have cellular data issues. Wifi calling will keep giving me a notice that my phone is going to use wifi for calls when the feature is set to prefer Cellular for calls. Rebooting doesn't help, it will eventually say it again. I have to keep turning off wifi to force the message away. And during browsing on cellular, it drops a lot even though I know I have great coverage where I use it. With 2 phones, and only have this update, I think something is wrong with this firmware.
S7 (non-edge) not rooted.
Build: MMB29M.G930TUVU3APG1
Security version:
MDF v2.0 Rel 7
VPN v1.4 Rel 6.0
Android security patch level July 1, 2016
seanvree said:
if we are already rooted on PD8, can we just flash this ontop of PD8 and retain root? What about user data?
Click to expand...
Click to collapse
I haven't tried that, I just flashed the whole firmware via odin and rerooted again
---------- Post added at 04:46 PM ---------- Previous post was at 04:42 PM ----------
xenon2000 said:
I got this update on 2 S7's and on both of them, I now have cellular data issues. Wifi calling will keep giving me a notice that my phone is going to use wifi for calls when the feature is set to prefer Cellular for calls. Rebooting doesn't help, it will eventually say it again. I have to keep turning off wifi to force the message away. And during browsing on cellular, it drops a lot even though I know I have great coverage where I use it. With 2 phones, and only have this update, I think something is wrong with this firmware.
Build: MMB29M.G930TUVU3APG1
Security version:
MDF v2.0 Rel 7
VPN v1.4 Rel 6.0
Android security patch level July 1, 2016
Click to expand...
Click to collapse
I haven't had any issues, everything works fine. Here go down till you find generic galaxy s7 after root process and flash the zip he made via Flashfire. See if that helps. Did you factory reset after rooting btw?
I am not rooted. I just saw this Firmware thread and figured this was a good place to talk about my issue related to this firmware. I will update my previous post to show no rooting. All stock.
xenon2000 said:
I am not rooted. I just saw this Firmware thread and figured this was a good place to talk about my issue related to this firmware. I will update my previous post to show no rooting. All stock.
Click to expand...
Click to collapse
Oh, sorry, then I'm not sure what could be the issue, you could try clearing cache in recovery.
Does anyone know where to get the PG1.tar files and how to flash them VIA ODIN? I'm on a soft brick right now
seanvree said:
Does anyone know where to get the PG1.tar files and how to flash them VIA ODIN? I'm on a soft brick right now
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24572369242688258 here ya go
Bit of an emergency and I'm on an old phone I can't find charger for but I need the .tar file for the firmware before this last update. I kept refusing the update and today I went to root finally and I'm stuck in boot loop with the engboot
jaxwithanx said:
Bit of an emergency and I'm on an old phone I can't find charger for but I need the .tar file for the firmware before this last update. I kept refusing the update and today I went to root finally and I'm stuck in boot loop with the engboot
Click to expand...
Click to collapse
A factory reset should fix it, this happened to me as well.

V30n-EUR-xxx is out

Download: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW8D9K47526NAO5812C1D5V/D85530n_00_0816.kdz
Security Patch Level 08.01.16
Enjoy
Montechristo said:
Enjoy
Click to expand...
Click to collapse
I'd love to, but unfortunately/inexplicably, low power bluetooth still does not work as it used to (garage opener app won't establish BT connection), so I'll have to go back to 30b again - for the fourth time.
Flashed this. Now stuck, LG won't see my device information when trying to flash tot or kdz. Solution? When i had twrp i flashed back the 5.0 boot and worked but now i can't use kingroot on v30n.... help please
Later Edit: http://forum.xda-developers.com/showpost.php?p=64624353&postcount=3 this saved me! tHANKS GUYS!
autorec ?
Montechristo said:
Download: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW8D9K47526NAO5812C1D5V/D85530n_00_0816.kdz
Security Patch Level 08.01.16
Enjoy
Click to expand...
Click to collapse
thanks for the link, but I am still unable to download. I've also tried the links on the OP, same issue.
grymmy said:
thanks for the link, but I am still unable to download. I've also tried the links on the OP, same issue.
Click to expand...
Click to collapse
Try different web browser.
grymmy said:
thanks for the link, but I am still unable to download. I've also tried the links on the OP, same issue.
Click to expand...
Click to collapse
Added again "http://" on search bar address
from yesterday on my phone..
fOxunO said:
Added again "http://" on search bar address
Click to expand...
Click to collapse
adding the "http://" worked...didn't try using another browser but thanks a million guys...
one more question, root and TWRP working on this latest firmware?
thanks in advance
With the V30N version Kingroot can not apply the root.
I'm trying other solutions ....
pippo45454 said:
With the V30N version Kingroot can not apply the root.
I'm trying other solutions ....
Click to expand...
Click to collapse
Let us know if you find something..
pippo45454 said:
With the V30N version Kingroot can not apply the root.
I'm trying other solutions ....
Click to expand...
Click to collapse
Kingroot doesn't work because of new security patches. We need a new version of Kingroot.
Letter of version just have geographic signification, no ?
Because there is V30B with latest Android path ?
Correct.
phony_user said:
I'd love to, but unfortunately/inexplicably, low power bluetooth still does not work as it used to (garage opener app won't establish BT connection), so I'll have to go back to 30b again - for the fourth time.
Click to expand...
Click to collapse
did you root phone and install twrp ? if yes - that could be the problem
Anyone have noticed RIL problems whit this build?
No problem at the moment, but i can't root this new sw version.... King root doesn't funtcion,,,,,
Since this is for European D855 model, there should not be any problems flashing on the international G3 right?
jtrvk said:
Since this is for European D855 model, there should not be any problems flashing on the international G3 right?
Click to expand...
Click to collapse
I'm in EU, but my G3 is for ARE region (Emirates). I installed V30n and there is warning about region after reboot, but everything works and there is no problems.
Installed it on my T-Mobile DE lg g3
After phone finishes booting up, warning message: current version is not available for user. Can't find matched cust for NT-code mcc/mnc[26201], subset[FF]
Message goes away if you click any ware on the screen
But still the major wi-fi problems with randoms disconnects and turning itself off when screen is also off, is still not resolved.

Categories

Resources