Related
I got my S4 these days. I have flashed XXUAME2 with Odin, rooted the phone, tried MIUI, but was not satisfied. So I restored the backup. Everything was working fina till I installed Adaway and rebooted the phone. Suddenly the wifi was not working anymore. I clicked on the wifi-witch to activate WiFi - no result. Then I rolled back the backup, installed the I9505_XXUEMJ5_MODEM, installed even the "fix". But the wifi still does not work.
Now I just want to have a normal S4 with the original rom, rooted - and working wifi.
What should I do?
Thanks a lot in advance! :highfive:
nalitox said:
I got my S4 these days. I have flashed XXUAME2 with Odin, rooted the phone, tried MIUI, but was not satisfied. So I restored the backup. Everything was working fina till I installed Adaway and rebooted the phone. Suddenly the wifi was not working anymore. I clicked on the wifi-witch to activate WiFi - no result. Then I rolled back the backup, installed the I9505_XXUEMJ5_MODEM, installed even the "fix". But the wifi still does not work.
Now I just want to have a normal S4 with the original rom, rooted - and working wifi.
What should I do?
Thanks a lot in advance! :highfive:
Click to expand...
Click to collapse
Hello mate please download this file and flash it via odin by selecting phone, and Remember to turn it off your phone manually before flashing any modem,If the problem still persist please tell me if your in old bootloader or the new bootloader and will be happy to assist you have a nice day.
To check your bootloader go to download mode and if you have an entry of Knox warranty void then you are having the new bootloader.
If you are having the old bootloader XXUB flash http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone.
If you are having the new bootloader XXUD flash http://www.mediafire.com/download/zriv6i5c01lqns6/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.rar file with odin by selecting phone.
First, wow, thanks for that fast reply, dude! Ok, I have 0x1, that means, I have to flash the file for the new bootloader, right?
Is there anywhere a mirror? I am in China right now and mediafire is blocked.
Cheers :highfive:
nalitox said:
First, wow, thanks for that fast reply, dude! Ok, I have 0x1, that means, I have to flash the file for the new bootloader, right?
Is there anywhere a mirror? I am in China right now and mediafire is blocked.
Cheers :highfive:
Click to expand...
Click to collapse
Sorry for any delay sir , here's another link inorder for you to download it https://dl.dropboxusercontent.com/u/17236295/MKF_modems_GSM_LTE.tar.md5.zip Credit goes to phil.o for uploading the file , and make sure to thank him here http://forum.xda-developers.com/showthread.php?p=48095149#post48095149as well, have a nice day sir
Alright, thanks. That was a quick download, thanks.
What I did:
1. turned off the phone, removed battery, inserted battery again
2. booted into the download mode
3. flashed the file with odin:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MKF_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The problem is still there. I cannot turn the Wifi-switch to "ON".
What is causing this problem and what can I do?
nalitox said:
Alright, thanks. That was a quick download, thanks.
What I did:
1. turned off the phone, removed battery, inserted battery again
2. booted into the download mode
3. flashed the file with odin:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MKF_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The problem is still there. I cannot turn the Wifi-switch to "ON".
What is causing this problem and what can I do?
Click to expand...
Click to collapse
What rom are you using sir? and what kind of recovery do you have? Flash a different kernel. Or do a clean wipe
---------- Post added at 04:00 PM ---------- Previous post was at 03:53 PM ----------
Repulsa said:
What rom are you using sir? and what kind of recovery do you have? Flash a different kernel. Or do a clean wipe
Click to expand...
Click to collapse
Edit: if flashing a different kernel thats not work then I think the only way to fix this would be to flash a complete official stock firmware which you can get it from here http://www.sammobile.com/firmwares/2/ or if you want a pre-rooted you can follow the instruction here.http://forum.xda-developers.com/showthread.php?t=2250824 have a nice day sir and merry christmas to you.
Cool, I saw your edit post. Thanks, dude.
What Firmware should I choose? The phone was bought in Germany from BASE. BASE is using the E-Plus network. But the phone is not branded nor carrier-locked. Should I choose the E-Plus Firmware?
Plus. How to install the Firmware? Just use Odin3 to flash it?
nalitox said:
I prefer a clean wipe. How to do that? Where can I obtain the files?
Click to expand...
Click to collapse
if you want a stock rom from samsung you can go from here http://www.sammobile.com/firmwares/2/ and if you want a pre-rooted rom you can go from here as well http://forum.xda-developers.com/showthread.php?t=2250824 Have a nice day.
Remember to follow any instruction before flashing. you have to flash the firmware via odin and select pda. And flash away. And sorry that i cannot assist you for now because ill be having a dinner with my family and hoping someone will help you to fix this problem if the problem still persist after flashing the stock firmware. Merry christmas to you n your family . And xda community
Ok, understood, thanks.:good:
I want to get a pre-rooted ROM. What version should I pick? I want to have Android 4.3 and (if possible) de-bloated. My Knox is 0x1 and I don't really care about Knox or Knox-related features.
The list here http://forum.xda-developers.com/showthread.php?t=2250824 is very long and complicated. I read through it two times and am not sure what ROM to download.
Can anyone assist, please?
Merry Christmas everyone! :highfive:
nalitox said:
Ok, understood, thanks.:good:
I want to get a pre-rooted ROM. What version should I pick? I want to have Android 4.3 and (if possible) de-bloated. My Knox is 0x1 and I don't really care about Knox or Knox-related features.
The list here http://forum.xda-developers.com/showthread.php?t=2250824 is very long and complicated. I read through it two times and am not sure what ROM to download.
Can anyone assist, please?
Merry Christmas everyone! :highfive:
Click to expand...
Click to collapse
1. Latest version android 4.3 MKE pre-rooted -> HERE
2. For de-bloat it -> HERE
Alright, I have installed this pre rooted version. Wifi works again, thanks.
One annoying issue: everytime I restart the phone, I have to activate Wifi again and re-enter the password.
Edit: Another very annoying issue: I believe that screen is not being dimmed correctly. It is always to dark, even in a very bright enviroment. Plus: the LEDs of both hardware keys are always on when the screen is on.
I just want to have the normal Samsung Stock rooted.
What am I doing wrong?
nalitox said:
Alright, I have installed this pre rooted version. Wifi works again, thanks.
One annoying issue: everytime I restart the phone, I have to activate Wifi again and re-enter the password.
Edit: Another very annoying issue: I believe that screen is not being dimmed correctly. It is always to dark, even in a very bright enviroment. Plus: the LEDs of both hardware keys are always on when the screen is on.
I just want to have the normal Samsung Stock rooted.
What am I doing wrong?
Click to expand...
Click to collapse
If you installed the pre-rooted rom and your having a problem do a factory reset bro phone settings> accounts > backup and reset >Factory reset . Or turnb off your device manually and wait a few sec hold power+volume up the same time and do it there as well, Make sure to use the odin 3.09 when your flashing ..ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again
Repulsa said:
.ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again
Click to expand...
Click to collapse
Does this mean that I have to re-flash a new ROM via the recovery?
nalitox said:
Does this mean that I have to re-flash a new ROM via the recovery?
Click to expand...
Click to collapse
No If you download the pre-rooted rom you need to flash it via odin , just like how you flash the stock rom have a nice day.
Edit: if you see a .tar inside of the file means you need to flash it via odin
Understood. Alright, since I don't want to lose all my apps and settings, I decided to flash the Wifi-Fix: XXUEMKE WiFi_FIX
I used Odin to flash this tar.
Unfortunately the Wifi has still the same issue like in the beggining.
Is there an option to flash the wifi fix in the recovery?
nalitox said:
Understood. Alright, since I don't want to lose all my apps and settings, I decided to flash the Wifi-Fix: XXUEMKE WiFi_FIX
I used Odin to flash this tar.
Unfortunately the Wifi has still the same issue like in the beggining.
Is there an option to flash the wifi fix in the recovery?
Click to expand...
Click to collapse
The question is, did u even extract the file you download ? And no you can only flash it via odin and select phone/cp
Sent from my Phone.
Hey, thanks for your help, mate!
Yap, I have extracted the file and flashed the *.tar via odin. Still no result.
Alright, to sum it up. The fix does not work for me. Why? Should I try to flash another Modem?
edit: I really want to have the phone working now. I dont care about other modifications, I just want to have the basic OS rooted. That is all. How to do this?
nalitox said:
Hey, thanks for your help, mate!
Yap, I have extracted the file and flashed the *.tar via odin. Still no result.
Alright, to sum it up. The fix does not work for me. Why? Should I try to flash another Modem?
Click to expand...
Click to collapse
If i have this problem right now,the best thing i will do is either to flash pre-rooted rom or the stock rom if there is any Fc and such . Just turn of your phone the wait a few sec and hold power+volume up in order to reach recovery and do a wipe cache and a factory reset . Hehe
Edit:you already did flash the pre rooted that joku gave u right? Reflash it and follow the step above
Sent from my Phone.
Ok, thanks.
There are no FC at all, just the wifi is the problem.
However, I will flash I9505XXUAME2_MODEM, apply the fix and hope that it will work.
Should I flash modem with odin via "PDA" oder via "PHONE"?
Another question: If I download a pre-rooted ROM and flash it via the recovery, will the new modem be included in the ROM?
Thanks again, mate.
Edit: http://d-h.st/users/DjeMBeY/?fld_id=16262#files
There is no fix for the UAME2. That sucks.
nalitox said:
Ok, thanks.
There are no FC at all, just the wifi is the problem.
However, I will flash I9505XXUAME2_MODEM, apply the fix and hope that it will work.
Should I flash modem with odin via "PDA" oder via "PHONE"?
Another question: If I download a pre-rooted ROM and flash it via the recovery, will the new modem be included in the ROM?
Thanks again, mate.
Click to expand...
Click to collapse
Download odin 3.09 its better to use it with s4.
If your gonna flash the modem always use PHONE/CP. If your flashing pre-rooted rom from djembey or samsung stock firmware always use PDA. And if you download custom rom such as omega,phoenix,golden,etc.etc then you flash that via recovery using either CWM, philz or twrp.
Edit try emj5 wifi fix if not just do a fresh install
Sent from my Phone.
My samsung Galaxy is totaly dead after I try to root the system.
Noy my phone is stay in Downloading mode, can't boot up, or recover mode.
I was using ATT OS and uppdrage to Android 4.3, after I upgrade, rood function is not working any more. Super user is ask my to manual root again.
my recover mode is still original can't back up or install any ROM.
can any one please help me provide how to flash my phone, may need some .md5 or .tar by using Odin3-v1.85 to reflash boot rocover mode that I can install other rom from web.
thank you , thank you please help.......................
Sam
sammaspda said:
My samsung Galaxy is totaly dead after I try to root the system.
Noy my phone is stay in Downloading mode, can't boot up, or recover mode.
I was using ATT OS and uppdrage to Android 4.3, after I upgrade, rood function is not working any more. Super user is ask my to manual root again.
my recover mode is still original can't back up or install any ROM.
can any one please help me provide how to flash my phone, may need some .md5 or .tar by using Odin3-v1.85 to reflash boot rocover mode that I can install other rom from web.
thank you , thank you please help.......................
Sam
Click to expand...
Click to collapse
What is your baseband?
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
[email protected] said:
What is your baseband?
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
thank you for help...
my is ATT I337 xxxxMF3, ..not sure, I try to root, after root ...is brick, please please help.
sammaspda said:
thank you for help...
my is ATT I337 xxxxMF3, ..not sure, I try to root, after root ...is brick, please please help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502003
Download the md5 tar file. And flash via odin
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=2502003
Download the md5 tar file. And flash via odin
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
thank you for your help.
Can you please let me know how should I choose this file? by using Odin3
which one I have to choose........Filedownload form "Bootloader" or "PDA"
thank you,
sammaspda said:
thank you for your help.
Can you please let me know how should I choose this file? by using Odin3
which one I have to choose........Filedownload form "Bootloader" or "PDA"
thank you,
Click to expand...
Click to collapse
I try all of them, now phone is asking me
Firmware upgrade encountered an issue. please selete recover mode in Kies & try again.
But I try to connect Kies to recover, but Kies can;t connected phone.....still need help.....
please please ...
thank you
sammaspda said:
I try all of them, now phone is asking me
Firmware upgrade encountered an issue. please selete recover mode in Kies & try again.
But I try to connect Kies to recover, but Kies can;t connected phone.....still need help.....
please please ...
thank you
Click to expand...
Click to collapse
Follow this guide by gtj0 http://forum.xda-developers.com/showthread.php?t=2526964
Or
There is a link to a guide to show you how to use this. You need to use Odin 3.07 or 3.09 http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Still failed.....screen always ask me use Kies to update firmware, but Kies still unable to undate............
still need more help.....
thank you
sammaspda said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Still failed.....screen always ask me use Kies to update firmware, but Kies still unable to undate............
still need more help.....
thank you
Click to expand...
Click to collapse
Go to best buy and have them reflash your firmware.
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
I went best buy this morning but they unable reflash my phone.
they ask call 1800 to get repair.......
If you were trying to upgrade to 4.3 and it failed, you might have to follow these directions: http://forum.xda-developers.com/showpost.php?p=48927617&postcount=3
sammaspda said:
I went best buy this morning but they unable reflash my phone.
they ask call 1800 to get repair.......
Click to expand...
Click to collapse
Your going to lose mf3. Follow that guide I posted earlier by gtj0 download the emergency files flash via Odin in PDA then adb sideload mf3-mj9 then mj9-mk2
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
---------- Post added at 06:49 PM ---------- Previous post was at 06:48 PM ----------
DeadlySin9 said:
If you were trying to upgrade to 4.3 and it failed, you might have to follow these directions: http://forum.xda-developers.com/showpost.php?p=48927617&postcount=3
Click to expand...
Click to collapse
I think he was trying to reflash the mf3 firmware
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
thank you for your help....I total give it up now....
I already try over weekend spend over 48HRs to working with phone.
always get problem, I have to send to JTAG not, thank you for your help.
How do you think JTAG repair service?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190990521197&ssPageName=ADME:X:RTQ:US:1123
thank you
Sam
sammaspda said:
thank you for your help....I total give it up now....
I already try over weekend spend over 48HRs to working with phone.
always get problem, I have to send to JTAG not, thank you for your help.
How do you think JTAG repair service?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190990521197&ssPageName=ADME:X:RTQ:US:1123
thank you
Sam
Click to expand...
Click to collapse
Don't give up so easy. ... If you tell us what kinda root method did u use it might help us to help you figure it out what is your firmware. ....MF3 use jortex method to root. ...(format your sd card to exfat and use terminal emulator)......If already on 4.3 MK2 u should use SAFEROOT METHOD from Verizon forum. .... follow my thread..... http://forum.xda-developers.com/showthread.php?t=2573080.... it will get u back on track. ...... If u are MF3 just use MF3.tar files from first post. ....If u think u are Mk2 using that one click tool..... (Most likely u are MK2 already. ... Since u said u upgraded to 4.3 and root doesn't work anymore).... Then u should go to post#3 follow the guide. .....u should be ok..... save that money.... If u need more help PM me......
Swyped_from_SS_MK2_Tapatalk
Jtag service man told me..."It looks like the bootloader is permanentaly locked with the rom you tried flashing"
do you know how to solve?
thank you
sammaspda said:
Jtag service man told me..."It looks like the bootloader is permanentaly locked with the rom you tried flashing"
do you know how to solve?
thank you
Click to expand...
Click to collapse
sammaspda said:
My samsung Galaxy is totaly dead after I try to root the system.
Noy my phone is stay in Downloading mode, can't boot up, or recover mode.
I was using ATT OS and uppdrage to Android 4.3, after I upgrade, rood function is not working any more. Super user is ask my to manual root again.
my recover mode is still original can't back up or install any ROM.
can any one please help me provide how to flash my phone, may need some .md5 or .tar by using Odin3-v1.85 to reflash boot rocover mode that I can install other rom from web.
thank you , thank you please help.......................
Sam
Click to expand...
Click to collapse
From my understanding that u are on MF3 and u updated to 4.3 MK2 firmware but your root isn't working (coz MK2 use different ROOT method....it called SAFEROOT) ....so i'm guessing u used terminal emulator ( same root method ) from MF3....or i dunno what u did manually (ADB shell maybe) ....u don't give enough information so other can help u......and then u hit bricked wall.......FOLLOW MY THREAD ON POST#3 MK2_UNBRICKED_METHOD from gtj0 guide that i edited .....make sure u download MF3>MK2update.zip from OP(Original Post) coz u gonna need it in the end .....download and extract all MF3-emergencypart 1 and 2 files......recovery-mj6.tar.md5....(or i337MK2stockrecovery.tar.md5...it also work with some user)....and follow the guide flashing via ODIN.....READ OP,post#2,post#3 make sure u understand everything before u damage more your expensive S4......need more help just PM me.....GOODLUCK.....U SHOULD BE OK....:good:....To show your appreciation in the future .......instead of typing thank you.....thank you....thank you......hit THANK button.....
Im having similar woes. I had problems installing a ROM, softbricked, tried restore to 4.2.2, wouldnt go, tried updating (stupidly) to 4.3 got obKNOXious (had no clue then about knox) tripped knox by trying to go back to 4.2.2 and got firmware update fail. Stuck with no recovery, nor any way of repairing. I tried many versions of ODIN, both kies emergency firmware update options, and heimdall. Heimdall seems promising as i have been able to flash a custom recovery with --no-reboot and reboot using pwr+home+vlup, and i get a warning about tripping knox but it boots into custom recovery. I am able to flash (CM11 for example) but it gives me kernel trips on knox and shuts down on boot. i saw your other thread about the mf3 and mk3 but im not sure if they would work for my variant. no matter what i try i cant get this paperweight to its former glory. local repair center said they wont do anything as knox warranty = tripped. no best buy samsung centers in my area. someone please help.
ted77usa said:
From my understanding that u are on MF3 and u updated to 4.3 MK2 firmware but your root isn't working (coz MK2 use different ROOT method....it called SAFEROOT) ....so i'm guessing u used terminal emulator ( same root method ) from MF3....or i dunno what u did manually (ADB shell maybe) ....u don't give enough information so other can help u......and then u hit bricked wall.......FOLLOW MY THREAD ON POST#3 MK2_UNBRICKED_METHOD from gtj0 guide that i edited .....make sure u download MF3>MK2update.zip from OP(Original Post) coz u gonna need it in the end .....download and extract all MF3-emergencypart 1 and 2 files......recovery-mj6.tar.md5....(or i337MK2stockrecovery.tar.md5...it also work with some user)....and follow the guide flashing via ODIN.....READ OP,post#2,post#3 make sure u understand everything before u damage more your expensive S4......need more help just PM me.....GOODLUCK.....U SHOULD BE OK....:good:....To show your appreciation in the future .......instead of typing thank you.....thank you....thank you......hit THANK button.....
Click to expand...
Click to collapse
sammaspda said:
Jtag service man told me..."It looks like the bootloader is permanentaly locked with the rom you tried flashing"
do you know how to solve?
thank you
Click to expand...
Click to collapse
OK im shocked but somehow i made this work. i used to kies to download firmware by using firmware upgrade and initialization under tools and grabbing the firmware from windows user/appdata/local/temp folder after kies finished downloading (as it starts decompressing)(faster than waiting to download from sammobile). i then pulled all files out of md5 using 7zip, and used heimdall to flash all files to their respective partitions/mountpoints. rebooted still no recovery nor boot. tried again and nothing. i then tried a custom recovery and it gave me seandroid enforcing RECOVERY and restart. so then i tried flashing custom recovery again using heimdall with --no-reboot switch and rebooted with volup+home+pwr and then i was able to enter custom recovery. so i wiped data and cache rebooted got nothing, no recovery no boot just dl mode. so i then reflashed stock rom through heimdall and rebooted, got stock recovery which would try to do something (progress bar appeared) and bootlooped. so i reflashed custom recovery again wiped cache and data and /data /media option (which took longer even though no extsdcard present, which puzzled me) and this time i tried to mount system in recovery and got an error. so i formated /system and it mounted fine. rebooted no boot no recovery. flashed custom recovery wiped /data /media, /cache, /dalvik, formated /sdcard, /system, /data, /cache, mounted /system and rebooted right into download mode and flashed stock image but this time with --no-reboot switch and once finished i manually rebooted into recovery. recovery did its thing and i finally i got a boot animation and glowing led, left it for 10 minutes and it was at samsung setup screen. unplugged my phone instantly died. no boot no recovery. repeated last step but once in samsung os i went to settings backup and reset menu and reset the phone from there. it went into recovery on its own, erased and rebooted and it seems to work fine now (fingers crossed, its only been ten minutes (relatively little compared to this 2 week ordeal.) Oddly enough kies downloaded a bell version although my phone is fido
Cheers!
I recently flashed CyanogenMod 11 on my N9005. The thing is i'm not happy with it and i want to revert back to a stock rom. So what i was wondering is if i have to revert to the exact old version (4.3) or i could flash a stock KitKat firmware from SamMobile and how can i do that? I read a thread where a guy bricked his phone when trying with cwm cause he had some files missing. I know most users are sick of noobs like me asking this kind of questions but i would much appreciate if someone could help me out.
Thanks
FreeeMans20 said:
Cheers!
I recently flashed CyanogenMod 11 on my N9005. The thing is i'm not happy with it and i want to revert back to a stock rom. So what i was wondering is if i have to revert to the exact old version (4.3) or i could flash a stock KitKat firmware from SamMobile and how can i do that? I read a thread where a guy bricked his phone when trying with cwm cause he had some files missing. I know most users are sick of noobs like me asking this kind of questions but i would much appreciate if someone could help me out.
Thanks
Click to expand...
Click to collapse
Follow the instructions on the link, also there is a link on that page which takes you another page how to root N9005XXUENB7 which is the latest firmware for samsung galaxy note 3 SM-N9005. Please make sure you follow the instructions carefully and you have the right model international Note 3 SM-N9005,
http://nasirtech.blogspot.co.uk/2014/03/n9005xxuenb7-android-442-kitkat.html
The above method is for bringing the phone to factory stock. If you just want to revert back to a samsung rom and your phone is rooted with custom recovery, which I presume it is, you can just flash a samsung rom of your choice there are plenty to choose from and every rom thread have instructions how to flash their rom
Hope this helps, all the best.
Cheers
vtec303 said:
Follow the instructions on the link, also there is a link on that page which takes you another page how to root N9005XXUENB7 which is the latest firmware for samsung galaxy note 3 SM-N9005. Please make sure you follow the instructions carefully and you have the right model international Note 3 SM-N9005,
The above method is for bringing the phone to factory stock. If you just want to revert back to a samsung rom and your phone is rooted with custom recovery, which I presume it is, you can just flash a samsung rom of your choice there are plenty to choose from and every rom thread have instructions how to flash their rom
Hope this helps, all the best.
Click to expand...
Click to collapse
Cheers man. I'm downloading as we speak. Hopefully i'll come back with good news.
No problem mate, I am sure the process will go butter smooth but let us know if you come across any problems , all the best.
Problem in Odin
vtec303 said:
No problem mate, I am sure the process will go butter smooth but let us know if you come across any problems , all the best.
Click to expand...
Click to collapse
So, like yesterday, Odin fails on me. At the very end. When the green loading bar is full and it seems like it's going to succeed, the last line says failed. The phone has CWM 6.0.4.7 flashed and CF AutoRoot. Any ideeas?
FreeeMans20 said:
So, like yesterday, Odin fails on me. At the very end. When the green loading bar is full and it seems like it's going to succeed, the last line says failed. The phone has CWM 6.0.4.7 flashed and CF AutoRoot. Any ideeas?
Click to expand...
Click to collapse
ok that NB7 is failing on me as well for some reason, but in the mean time to get your phone back on line download NB4 (link below) and flash using odin 3.07, thats what I did and got no errors phone booted with no problems, if it takes too long to boot after flashing or goes in a boot loop enter recovery mode (home+power+vol up) and do data/factory reset and clear cache but that will wipe the internal storage, hope this will work
http://samsung-updates.com/device/?id=SM-N9005
Thanks
vtec303 said:
ok that NB7 is failing on me as well for some reason, but in the mean time to get your phone back on line download NB4 (link below) and flash using odin 3.07, thats what I did and got no errors phone booted with no problems, if it takes too long to boot after flashing or goes in a boot loop enter recovery mode (home+power+vol up) and do data/factory reset and clear cache but that will wipe the internal storage, hope this will work
http://samsung-updates.com/device/?id=SM-N9005
Click to expand...
Click to collapse
Downloading as we speak. I'll give it a try when done. I'll let you know!
Same
vtec303 said:
ok that NB7 is failing on me as well for some reason, but in the mean time to get your phone back on line download NB4 (link below) and flash using odin 3.07, thats what I did and got no errors phone booted with no problems, if it takes too long to boot after flashing or goes in a boot loop enter recovery mode (home+power+vol up) and do data/factory reset and clear cache but that will wipe the internal storage, hope this will work
http://samsung-updates.com/device/?id=SM-N9005
Click to expand...
Click to collapse
Same thing. This is what i'm getting every time i try to flash a ROM.Any other suggestions? Vtec303, can you please tell what are the exact steps you took to flash it? Thanks
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005AUTENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
ok sorry to hear that mate, give one more try with NB3, hopefully that should work, fingers crossed
If that fails than try this:
http://forum.xda-developers.com/showthread.php?t=2613374
That guys phone is a Hong Kong model but the files he is using to flash are compatible with international Note 3
SM N9005.
Sent from my SM-N9005 using Tapatalk
Another thing is your phone a 16GB model ?, or is it 32 or 64GB, cheers.
It's actually 32GB. I'm just after realizing. Would that be the reason why it's not working?
Sent from my SM-N9005 using xda app-developers app
Thanks
vtec303 said:
ok sorry to hear that mate, give one more try with NB3, hopefully that should work, fingers crossed
If that fails than try this:
http://forum.xda-developers.com/showthread.php?t=2613374
That guys phone is a Hong Kong model but the files he is using to flash are compatible with international Note 3
SM N9005.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks man. FeralFire's tutorial helped me a lot. That was the only way i could flash a custom ROM. And thanks for opening my eyes and reminding me about the size of my phone. For some reason, i got stuck to thinking that my device has only 16GB. Cheers and a big Thanks for your help!
No problem ur welcome, I am glad your phone is back online mate and I hope it stays that way , all the best, tc
Sent from my SM-N9005 using Tapatalk
Hi my note 3 sm-n9005 reboot at start up!
i can't get recovery mode
but download mode still working.
It is hard or soft brick?
thanks for ur replies u are the best.
rodyrach said:
Hi my note 3 sm-n9005 reboot at start up!
i can't get recovery mode
but download mode still working.
It is hard or soft brick?
thanks for ur replies u are the best.
Click to expand...
Click to collapse
Soft brick Reflash stock rom through ODIN...
ultramag69 said:
Soft brick Reflash stock rom through ODIN...
Click to expand...
Click to collapse
Thanks ultramag69
I have already done flash stock rom through odin but still bootloop just at startup
I mean when the phone vibrate and display samsung galaxy note 3 sm-n9005 and recovery booting in blue on top of the screen.
I really want to full wipe my device but cant get recovery mode.
Other way to wipe device??
rodyrach said:
Thanks ultramag69
I have already done flash stock rom through odin but still bootloop just at startup
I mean when the phone vibrate and display samsung galaxy note 3 sm-n9005 and recovery booting in blue on top of the screen.
I really want to full wipe my device but cant get recovery mode.
Other way to wipe device??
Click to expand...
Click to collapse
I'd flash TWRP or CWM and wipe it through that but if you haven't done so already this will trip your Knox warranty void as these recoveries are custom.
Better to try this than leave as a brick..
ultramag69 said:
I'd flash TWRP or CWM and wipe it through that but if you haven't done so already this will trip your Knox warranty void as these recoveries are custom.
Better to try this than leave as a brick..
Click to expand...
Click to collapse
Already done! Same result. Bootloop and can't access to stock or costum recovery TWRP or CWM.
rodyrach said:
Already done! Same result. Bootloop and can't access to stock or costum recovery TWRP or CWM.
Click to expand...
Click to collapse
Are you sure do you rom flash or recovery for N9005??
What ROM have you tried?? link if it's possible
(version of rom)
Bruno saa said:
Are you sure do you rom flash or recovery for N9005??
What ROM have you tried?? link if it's possible
(version of rom)
Click to expand...
Click to collapse
yeah sure! i tried these roms N9005XXUFNG2_N9005OXXFNG3_N9005XXUFNG2_HOME.tar.md5
N9005XXUGNG1_N9005SFRGNG1_N9005XXUGNG1_HOME.tar.md5 and
N9005XXUENC2_N9005OXXENB1_N9005XXUENC2_HOME.tar.md5
It is like something prevented the phone to get to the part that contains the rom but at the same time if I had a problem with emmc I believe that odin would report failure but everything goes right and odin says pass but the phone dont boot.
for links I erased my browser history recently because my computer was stuffed.
If i can get stock rom with files separatly like pda modem ans csc instead a single tar file i'll try this.
sorry my english is so bad
rodyrach said:
yeah sure! i tried these roms N9005XXUFNG2_N9005OXXFNG3_N9005XXUFNG2_HOME.tar.md5
N9005XXUGNG1_N9005SFRGNG1_N9005XXUGNG1_HOME.tar.md5 and
N9005XXUENC2_N9005OXXENB1_N9005XXUENC2_HOME.tar.md5
It is like something prevented the phone to get to the part that contains the rom but at the same time if I had a problem with emmc I believe that odin would report failure but everything goes right and odin says pass but the phone dont boot.
Click to expand...
Click to collapse
Have you got PIT file of your device?
Wath is your country code? ( CSC )
Bruno saa said:
Have you got PIT file of your device?
Wath is your country code? ( CSC )
Click to expand...
Click to collapse
yeah!! i have this
CSB_signed_HLTE_EUR_OPEN_32G_0805.pit
i tried that single flash and with stock rom together same result.
phone don't boot
before i had this problem my csc was BGL
after flash stock rom XXUFNG2_XEF i rooted the phone with cf auto root and i installed phone info and csc select to change my csc to XEF.
that was wiped my phone and when i saw blue screen (configuration screen for 1st boot) the phone screen turn off by itself and nothing displayed. i tried several boutons but anything happened so i pushed power bouton for long time to reboot phone and that was the begin of my problem..phone bootlopp at startup.
i hope you understand my english
Bruno saa said:
Have you got PIT file of your device?
Wath is your country code? ( CSC )
Click to expand...
Click to collapse
I Have some sort of issue with my device.
One day i restarted my device as a rooted device.
Then it appears systemui crashed at boot so i had to reflash stock firmware.
Once i flashed id had repaired my phone.. But i could not get into recovery as some sort of lock is locking me out.
I can not seem to flash any recovery using ODIN.
And i cant find a PIT File that will help me re-Partition my deivce.
My Country is United Kingdom
JDMBrooksy said:
I Have some sort of issue with my device.
One day i restarted my device as a rooted device.
Then it appears systemui crashed at boot so i had to reflash stock firmware.
Once i flashed id had repaired my phone.. But i could not get into recovery as some sort of lock is locking me out.
I can not seem to flash any recovery using ODIN.
And i cant find a PIT File that will help me re-Partition my deivce.
My Country is United Kingdom
Click to expand...
Click to collapse
your rom can boot? Or still stay on bootloop?
JDMBrooksy said:
I Have some sort of issue with my device.
One day i restarted my device as a rooted device.
Then it appears systemui crashed at boot so i had to reflash stock firmware.
Once i flashed id had repaired my phone.. But i could not get into recovery as some sort of lock is locking me out.
I can not seem to flash any recovery using ODIN.
And i cant find a PIT File that will help me re-Partition my deivce.
My Country is United Kingdom
Click to expand...
Click to collapse
pit file only for sm-n9005
Bruno saa said:
your rom can boot? Or still stay on bootloop?
Click to expand...
Click to collapse
Before i flashed stock firmware, it would boot fine just SyStemUi would just keep crashing.
rodyrach said:
yeah!! i have this
CSB_signed_HLTE_EUR_OPEN_32G_0805.pit
i tried that single flash and with stock rom together same result.
phone don't boot
before i had this problem my csc was BGL
after flash stock rom XXUFNG2_XEF i rooted the phone with cf auto root and i installed phone info and csc select to change my csc to XEF.
that was wiped my phone and when i saw blue screen (configuration screen for 1st boot) the phone screen turn off by itself and nothing displayed. i tried several boutons but anything happened so i pushed power bouton for long time to reboot phone and that was the begin of my problem..phone bootlopp at startup.
i hope you understand my english
Click to expand...
Click to collapse
I'm French I undestand you english
I advise you to try the leaked stock N9005XXUGBNL8
I'm on GBNL8 and it's work very well
on Odin 3.10 with PIT file and check box Re-distribution
AP_N9005XXUGBNL8 to AP
CP_N9005XXUGBNL8 to CP
BL_N9005XXUGBNL8 to BL
CSC_OXA_N9005OXAGBNL8 to CSC
French post http://www.phonandroid.com/forum/rom-stock-n9005xxugbnl8-non-officielle-t109399.html
---------- Post added at 12:55 AM ---------- Previous post was at 12:47 AM ----------
JDMBrooksy said:
Before i flashed stock firmware, it would boot fine just SyStemUi would just keep crashing.
Click to expand...
Click to collapse
you can't do a Wipe data factory because you havn't got acces on recovery?
you can try flash recovery with MOBILE ODIN PRO if not working
download stock Leaked N9005XXUGBNL8 or try flash a Moded SystemUI for "fix" it
Ive jsut reflashed stock rom again, System status shows Custom after flashing complete stock.
Tried Auto Root and i get this :s
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
JDMBrooksy said:
Ive jsut reflashed stock rom again, System status shows Custom after flashing complete stock.
Tried Auto Root and i get this :s
Click to expand...
Click to collapse
download my PIT file on attachement Its for N9005
add PIT file when you flash your rom with check box Re-repartition
download Odin V3.10
Bruno saa said:
I'm French I undestand you english
I advise you to try the leaked stock N9005XXUGBNL8
I'm on GBNL8 and it's work very well
on Odin 3.10 with PIT file and check box Re-distribution
AP_N9005XXUGBNL8 to AP
CP_N9005XXUGBNL8 to CP
BL_N9005XXUGBNL8 to BL
CSC_OXA_N9005OXAGBNL8 to CSC
French post http://www.phonandroid.com/forum/rom-stock-n9005xxugbnl8-non-officielle-t109399.html
---------- Post added at 12:55 AM ---------- Previous post was at 12:47 AM ----------
you can't do a Wipe data factory because you havn't got acces on recovery?
you can try flash recovery with MOBILE ODIN PRO if not working
download stock Leaked N9005XXUGBNL8 or try flash a Moded SystemUI for "fix" it
Click to expand...
Click to collapse
ok i try this!
i have already downloaded N9005XXUGBNL8 there are 2 days ago but not try to flash that.
while flashing this rom should i check phone bootloader update??
rodyrach said:
ok i try this!
i have already downloaded N9005XXUGBNL8 there are 2 days ago but not try to flash that.
while flashing this rom should i check phone bootloader update??
Click to expand...
Click to collapse
No (don't check box Phone Bootloader update)
after flash rom just verify you have GBNL8 baseband (on about device)
Bruno saa said:
No (don't check box Phone Bootloader update)
after flash rom just verify you have GBNL8 baseband (on about device)
Click to expand...
Click to collapse
okay thanks
did anyone try to comeback (910C)lolipop (new poland stock rom COJ5) to kitkat (4.4.4) via odin
in Turkish forum some guy tried to comeback ,but he did not success it.I told him what I know about this.
he also used 4 parts rom and pit files ,one part rom and pit files,firstly try to kitkat bootloader via odin etc.etc but he said no,no,no
some guys are saying,now samsung has prevent to return kitkat from COJ5 ,is that true or not
we need alternatives way
hi,still no any idea
guys,I thing samsung putted a bootloader lock to return to kitkat even 5.0.1.
I tried to both of them ,but result no succesed it. that is way ,whom want to return to comeback to kitkat and 5.0.1 bootloader ,they will meet this lock. maybe you want to use miui rom like me .what will I do
I bought a new Note 4 N910G Indian version with LP 5.01. Loaded a custom Rom, Dr.Ketan ROM 5.0.1 after rooting. Got Xposed working but still didnt like it. I then downgraded to Stock Kitkat 4.4.4 from Sammobile site with ODIN. Rooted after loading TWRP again. (Root got disabled on downgrading so had to reroot SuperSu). Loaded Xposed. Everything working smoothly. Only one issue is Lockscreen Widgets which even Xposed is not able to bypass when the phone has PIN or Pattern lock but very happy now. Quite similar to my JB Note 3 N9005 which is what I wanted.
pelase help, any idea, suggestion,etc.
what should I do ,what can I do
i tried 5.0.1 but then came back to ANK3 4.4.4 Kitkat via ODIn with no problem. Nothing still beat the Xposed on Kitkat. One thing I am looking forward to is more options of 4.4.4 kernel. I can only see 1 kernel for kitkat which is KT kernel. Hopefully some more kernel for Note 4 Kitkat OS will be available.
theleftykid said:
i tried 5.0.1 but then came back to ANK3 4.4.4 Kitkat via ODIn with no problem. Nothing still beat the Xposed on Kitkat. One thing I am looking forward to is more options of 4.4.4 kernel. I can only see 1 kernel for kitkat which is KT kernel. Hopefully some more kernel for Note 4 Kitkat OS will be available.
Click to expand...
Click to collapse
do you mean try to change the kernel(kitkat)to return kitkat
mudur1998 said:
pelase help, any idea, suggestion,etc.
what should I do ,what can I do
Click to expand...
Click to collapse
Did you do all the steps properly?
I started off by doing a complete Reset and Format in TWRP. Wiped everything including External SD card.
So maybe you should do that first. But backup any important data on some external storage not connected to the phone. Most important : Make sure you are using the correct stock Kitkat ROM version for your model from Sammobile site.
Follow the instructions on Sammobile's firmware download page, and you should be back to stock Kitkat 4.4.4 soon.
niceguy1430 said:
Did you do all the steps properly?
I started off by doing a complete Reset and Format in TWRP. Wiped everything including External SD card.
So maybe you should do that first. But backup any important data on some external storage not connected to the phone. Most important : Make sure you are using the correct stock Kitkat ROM version for your model from Sammobile site.
Follow the instructions on Sammobile's firmware download page, and you should be back to stock Kitkat 4.4.4 soon.
Click to expand...
Click to collapse
that is good idea I will try it,firstly format evrything in twrp and after that try to flash rom with odin .I know my rom is correct rom.
I will report it
sorry ,no result,one part rom,four part roms,with pit and without pit .
before start I wiped everything in twrp
now, I believe that samsung putted a lock to prevent return also 5.1.1 my own rom
mudur1998 said:
now, I believe that samsung putted a lock to prevent return also 5.1.1 my own rom
Click to expand...
Click to collapse
any logs on odin?
kerbiii said:
any logs on odin?
Click to expand...
Click to collapse
knox warranty void 1
ap survey 2
sw rev.check fail device 2 binary 1
ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> _(N910CXXU1COI4_4files_5.1.1_TUR_Factory_Firmware)(like that I do not rememeber but it is my own firmware) HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried kitkat but have no more odin logs
Dont know why you are fiddling with PIT. Not required to touch it at all. As far as I know 5.1.1 to KK is quite possible, just as mine I successfully downgraded from 5.0.1 to KK.
Once you wipe everything and format SD card as well, and start with a clean slate, it should work through ODIN. Try with another version of ODIN maybe? Dont touch PIT section at all.
niceguy1430 said:
Dont know why you are fiddling with PIT. Not required to touch it at all. As far as I know 5.1.1 to KK is quite possible, just as mine I successfully downgraded from 5.0.1 to KK.
Once you wipe everything and format SD card as well, and start with a clean slate, it should work through ODIN. Try with another version of ODIN maybe? Dont touch PIT section at all.
Click to expand...
Click to collapse
I mean 5.1.1 but COJ5 (poland new firmware),I also tried with pit and without pit,I could not to downgrade 4.4.4 or 5.0.1 and also my own rom 5.1.1 COI4
Same problem
I am having the same problem, please advise the solution
please text on Whatsapp +966553270134
mudur1998 said:
I mean 5.1.1 but COJ5 (poland new firmware),I also tried with pit and without pit,I could not to downgrade 4.4.4 or 5.0.1 and also my own rom 5.1.1 COI4
Click to expand...
Click to collapse
have you tried flashing CWM recovery and wiping everything and using clean install? that way it will remove your 5.1.1 FW
kerbiii said:
have you tried flashing CWM recovery and wiping everything and using clean install? that way it will remove your 5.1.1 FW
Click to expand...
Click to collapse
yes you can flash twrp,no problem. I tried also I wiped everything and clean install with odin.no,no,no
never comeback to even COI4
mudur1998 said:
yes you can flash twrp,no problem. I tried also I wiped everything and clean install with odin.no,no,no
never comeback to even COI4
Click to expand...
Click to collapse
try to search for custom ROM with the same bootloader that you are using right now, your official bootloader will not let you flash any older bootloader thats why you cant flash anything under 5.1.1.,
i suggest try flashing the latest wanam
http://forum.xda-developers.com/note-4/development/rom-wanamlite-clean-odex-xposed-t2923266
if you successfully flash the wanam then try to flash the stock kitkat again
kerbiii said:
try to search for custom ROM with the same bootloader that you are using right now, your official bootloader will not let you flash any older bootloader thats why you cant flash anything under 5.1.1.,
i suggest try flashing the latest wanam
http://forum.xda-developers.com/note-4/development/rom-wanamlite-clean-odex-xposed-t2923266
if you successfully flash the wanam then try to flash the stock kitkat again
Click to expand...
Click to collapse
yes, without miui I am using these types of custom roms DN5,sixperience,e robot,rulinglite,sweet rom,etc.but I like only miui rom ,that is way I want to try come back bootloader 4.4.4 or 5.0.1.
It is (wanam lite rom)based COJ5,what would be change.but I have tried it. I have already installed wanamlite rom, and wanam kernel etc.no ,no, no
mudur1998 said:
yes, without miui I am using these types of custom roms DN5,sixperience,e robot,rulinglite,sweet rom,etc.but I like only miui rom ,that is way I want to try come back bootloader 4.4.4 or 5.0.1.
It is (wanam lite rom)based COJ5,what would be change.but I have tried it. I have already installed wanamlite rom, and wanam kernel etc.no ,no, no
Click to expand...
Click to collapse
what im trying to say is, try to flash 5.1.1. custom rom first and from there downgrade to kitkat. have you done trying that?