[Q&A]X-Note G900F S5 PORT - N9005 ONLY
Latest ONLINE : ver. 2.5 / (17 June 2014)
Guys,
I am pleased to make this Discussion thread of X-NOTE Galaxy S5 Ported ROM.
We have done enough discussion about The ROM in DEV thread which is suppose to be made for Dev discussion only.
Feel free to discuss about the X-NOTE S5 Ported ROM, BUT Please Don't Spam in this thread.
Read the FAQ (at the 2nd post) and/or use search function first on this thread or on the ROM thread, before you guys ask anything. Quite a lot questions are basically answered already on the ROM OP, and the Q&A thread.
Disclaimer :
Devs of this Rom are NOT responsible for any damage to your device.
The installation of the ROM is at your own risk.
However, the flash procedure is always performed
at least three times with a day of testing.
READ, UNDERSTAND, & FOLLOW THE INSTRUCTIONS PROVIDED in X-Note Thread.
ORIGINAL DEV THREAD X-NOTE Galaxy S5 (Latest build v.2.5)
Installation Instructions (For N9005 ONLY) :
1- Check the MD5 of your downloaded X-Note zip (v2.5 MD5 = 2BA118F027349334EC9B1574E63BD44F)
2- Reboot Recovery (I personally tested & installed with Chenglu CWM)
3- Full Wipe
4- install zip and choose the rom in your SD
5- Flash Rom Choose stuff in Aroma
6- Flash Performance Mod (Optional) -- This is only if you feel ROM is laggy on your device. I personally never flash this mod.
7- Done.
Click to expand...
Click to collapse
Special Notes on v.2.5 :
1. For Call recording , Press stop in the dialer before you finish your call or the recording will keep on recording .
2. Set Pin/Pattern Lock then Set to Lock immediately or under 15secs
3. If your rom is a bit laggy , change kernel settings
Dev's preffered Settings are
Max Frequency Screenon 249600
Max Frequency Screenoff 172800
Min Frequency Screenon/off 30000
Governor SmartMaxx
I/O Scheduler Fiops
I/O Size 512KB
IntelliPlug on
UKSM on
IntelliThermal Set
TCP WestWood
Click to expand...
Click to collapse
Credits -
@fahadali2315
@soloilmeglio
@xentrix
And thanks to @Khizar (original OP) for this thread.
FAQ'S
Q.Can I use this rom on tmo/Canadian variants?
A.This rom is made for the N9005, @fahadali2315 doesn't support other variants, He ONLY supports the N9005. However a user made a fix to get the things that work by default to work on tmo/Canadian variants. Read the "How to get N9005 roms to work on N900T(Tmo) & N900W8(Canadian) Variants" guide for step by step instructions BUT use the fix that i am linking below.
juggz143 said:
Hey guys, I made a zip to fix Wifi, NFC, & BT for N900t and possibly other variants (untested).
You can find it here.
Maybe add to OP so we can remove N9005 Only
Click to expand...
Click to collapse
Q.How do I get secured lock screen to this work?
A.
ejdavis said:
Put # in front of security. mdpp=none in build prop. Report if that works...
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Q.How do you get the white background for pen window?
A.
Freeddi said:
Go to X Note Control -> X Note Updates -> Rom Update 1 -> Updates -> and flash Update 5
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Q.Why does the installation fail when I try flashing this rom?
A2.Use latest philz recovery (recommended at ROM thread OP), other recoveries might not be able to flash this rom.
A2. v2.5 comes with Aroma Installer, I personally choose Chenglu CWM as it will handle Aroma better.
Q.Why is deep sleep not working?
A1. Deep sleep only works with the 2 NE6 kernels, 1 that comes with the rom and other that @fahadali2315 posted.
A2. Latest updated / tested : Aurora kernel is a good match to this X-Note S5 Ported ROM. Thanks @MojoManagement for the good kernel
Q.Can I use s5 kernels?
A.You can but they break the camera. So better to use n9005/n900t kernels instead.
Q.Why is sview not working?
A1.
Diabolo_Elvin YF said:
... Copy it manually and replace it with the old one in the system/app.
https://www.dropbox.com/s/v9ion1nu2vq8vf1/SViewCoverService.apk
Reboot and enjoy. ?
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A2. Sview is working on v2.5. If you use custom DPI, you will need to set the DPI for sviewcover to 480 with Xposed app setting module, save, and reboot your device.
Q.Why do I get "file not found" when I click on live wallpapers?
A.Live wallpapers are not included.
Q.My wifi is not working?
A1.Wait about a minute or so on setupwixard and it will turn on.
A2.Flash a different kernel.
A3. On v.2.3 & up, WiFi is working perfectly
Q.My mobile data doesnt work?
A1.Set APN from your provider manually.
A2. If A1 can't fix your device, try to go the APN, change the bearer to LTE, and then Save. Your mobile data should be working.
A3. If A1 & A2 still can't fix your device mobile data, your last resort is to flash FIX for National Roaming. Thanks to @Mroczny3 for the fix.
Q.I can't seem to enable recent apps?
A.Use gravitybox xposed/ Navigations Keys Actions set anyone u like to show Recent apps. (Task Switcher)
Q.I modified dpi and now my sview is messed up, what should I do?
A.Use app settings xposed module and set sview dpi to 480.
Q.I have HealthService Error popup?
A.Update Shealth to latest version from Samsung apps.
Q.XTransformer doesn't reboot in this port?
A.Just Set your dpi, and click on reboot button wait until it shows reboot in the TOAST. Then Reboot your phone from PowerMenu manually.
Q.Xnote App doesnt auto Reboot?
A.Some technical glitches ... do what you want to do like changing keyboard and then reboot manually from the PowerMenu.
Q.I cannot find my clock?
A.You have to set the color to white of the clock from XNOTE APP.
Q.Which Kernel is good for port ?
A1.It comes with Stock. But i personally use Wootever.
A2. Now our N9005 has a good kernel AURORA. I personally use this one, and is really good in deep sleep.
Q.I dont have all the toggles in my quicksettings like xnote and shootit?
A.Go to xnote app, Extras , Additional Script and run Enable All Toggles Script . Reboot Manually.
Q. I have 2 clocks in status bar, one in center and one on right side???
A. Disable one from gravitybox or xnote
Q. Why is my home button is not waking up my phone ?
A. Go to X-Note App/Extras/X-Note Custom Mods and Check/Uncheck Home Button wake and restart SystemUI.
Q. Why is my restart menu is not showing up ?
A. Go to X-Note App/Extras/X-Note Custom Mods and Check/Uncheck Restart Options Elements.
Q. How to Hide CPU Widget in StatusBar
A. Go to X-Note App/Extras/X-Note Custom Mods and Show/Hide CPU Widget in Other StatusBar Elements and restart SystemUI.
Q.How to use stock battery?
A.Not been tested myself but try.
Delete X-battery.apk and use xblast/wanam to put on the original battery. Should work on older versions
Not sure about v14.
Q. Having some weird reflection/shadow under the date/time? SOLUTION ?
A. This is the Network Speed indicator and the problem occurs if you are using any xposed modules (Wanam) . So either switch off the indicator by going to Xnote control app >> Extras >> StatusBar Mods or disabling the xposed module.
Q. Logs in phone doesn't fully show up ( top part is missing)
A. gravity box, search for the option to hide the menu overflow it happens with navbar enabled.
Q. How to change StatusBar transparency ?
A. Goto Xnote ControlApp>>Extras>> Color StatusBar Mods ,Check the Content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q."How do you change the DPI of the device?"
A. First Boot DPI is set to 360dpi in X-NOTE 11 , if you want to go back to stock the value is ( 480 ).Use X-Transformer to set your DPI. Follow the instructions properly.
Q."How do you remove the power button the left, and the home button on the right on status bar?"
A. Go into X-Note Control, Extra Settings, then uncheck both show/hide home button and show/hide lock button. And Restart SystemUI.
Q."There's a white line on top of my screen, and I didn't have it on stock! I'm pretty sure it's not something wrong with my screen...HELP!"
A. Go to X-Note Control App >> X-Note Panel >> Battery Bar Settings
Q."How do I get rid of the traffic monitor under my clock? It is starting to bug me now when I'm not downloading or browsing I just see 0kb/s."
A. Go to X-Note Control App >>Extras >> Status Bar Mods >> Show/Hide Network Speed
Q."Is there root on X-Note? I don't seem to have it"
A. X-Note is already rooted .
Q."How do I get the black and white Play Store?"
A.Here
Q."How do I install TW themes with these .apk files?"
A. Just install it, then press the menu button on your home screen, click Themes, then choose the one you like.
Q."Can I overclock on X-Note Kernel?"
A. No
Q."Why my WiFI Hotspot / Tethering is not working after flashing v 2.3 ?"
A. Flash this fix from your recovery. Thanks to @fahadali2315 for the fix.
Q."Why after flash v2.5, my ROM version still v2.3 ?"
A. No worries about this one. This is just a text info. But you are already on v.2.5. Enjoy the ROM.
Q."After flash v2.5, My home button still cannot show recent apps/task manager. Can I use remap key function at XNote Control ?"
A. No. This feature currently still not working yet. Please use the old method by Gravitybox.
Q."Why DCMprovider is eating up my battery ?"
A. Sometimes this is happen to some device(s). You can just simply freeze it from Titanium Backup. This process is brought from S5 firmware, you can just google DCMprovider to find out more.
FOR NOOBS
OP= Original Post/First Post in the thread
OTA= Over the air updates ( Xnote Updates )
SYSTEMATIC INSTRUCTIONS SPECIFICALLY FOR X-NOTE ROMS
GUIDE WRITTEN BY @nicholaschum
UNIVERSAL INSTRUCTIONS ARE LOCATED HERE
1. Did you make sure your phone model meets the criteria?
You CAN install N9005 ROMs on other variants, for example the N900T, N900W8,
provided you get a patch specific to your device, however if they have their specific
thread, N9005 ROMs DO NOT ALL SUPPORT IT.
Click to expand...
Click to collapse
2. Did you check the MD5 Checksum of the X-Note ROM after you downloaded it?
Open this spoiler for Mac Instructions!
1. Open Applications -> Utilities -> Terminal (or open Spotlight, and search for Terminal)
2. When Terminal is open, locate your directory where the file is downloaded, usually run this command: cd Downloads
3. When the path changes to the Downloads folder, type in "md5 XXXXXXXXXXXXX.zip" (name of the downloaded zip)
4. An MD5 code will come up, for example 614a3fac73272c9b53e74dc2ef5675f3, copy and paste this.
5. On the thread of the ROM, there should be located an MD5 code, press Command F, and paste it in the box. If the MD5 is found, then congratulations, MD5 checksum complete!
Click to expand...
Click to collapse
Open this spoiler for Windows Instructions!
1. Download WinMD5Free from this link: http://www.winmd5.com/ (NO INSTALL REQUIRED)
2. Unzip the application, then launch the .exe
3. Choose the file by clicking Browse, and double click the .zip file.
4. When the MD5 checksum value appears, copy and paste the MD5 from the custom ROM thread into the third box (Original file MD5 checksum value)
5. If they match, congratulations, MD5 checksum complete!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
3. Did you try wiping both Cache and Dalvik Cache?
Click this if you are using TWRP Recovery
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select the Wipe option.
3. Select the Advanced option.
4. Select Cache and Dalvik Cache, then swipe to wipe.
5. Reboot
Click to expand...
Click to collapse
Click this if you are using CWM Recovery
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select Wipe Cache
3. Click on the Volume Keys till you get to Yes, then press the power button
4. After done, select Advanced, then Select Wipe Dalvik Cache
5. Click on the Volume Keys till you get to Yes, then press the power button
6. Reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
4. Is your configuration different from the given stock values?
Did you install any undesired system files unsupported by soloilmeglio and Xentrix? If you did,
YOU LOST YOUR SUPPORT IMMEDIATELY, but there may be a bunch of people that may
have done the same.
Modifying the stock values include:
1. Modification of System Files (Installing unsupported themes from other ROMs)
2. Tweaking of System Files manually (e.g. deleting gsiff_daemon)
3. Flashing a different CSC (Customer Sales Code)
4. Flashing a different Kernel (e.g. CivZ's SnapKat, Wootever's Custom N3)
Click to expand...
Click to collapse
5. Did you install the ROM after formatting /system, /data, /sdcard, /cache, /dalvik-cache?
Click this if you are using TWRP Recovery
0. YOU WILL NEED AN EXTSD FOR THIS, TO REINSTALL THE ROM.
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select the Wipe option.
3. Select the Advanced option.
3. Select System, Internal SD, Cache and Dalvik Cache, then swipe to wipe.
5. Go back, select Format Data, type 'yes', then press Done.
6. Reinstall your ROM from your external SD.
7. Reboot
Click to expand...
Click to collapse
Click this if you are using CWM Recovery
0. YOU WILL NEED AN EXTSD FOR THIS, TO REINSTALL THE ROM.
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select Wipe Data/Factory Reset
3. Click on the Volume Keys till you get to Yes, then press the power button
4. After done, select Advanced, then select Wipe Dalvik Cache
5. Click on the Volume Keys till you get to Yes, then press the power button
6. After done, select Mounts and Storage, select Format /system
7. Click on the Volume Keys till you get to Yes, then press the power button
8. After done, select Mounts and Storage, select Format /sdcard
9. Click on the Volume Keys till you get to Yes, then press the power button
10. After done, select Mounts and Storage, select Format /cache
11. Click on the Volume Keys till you get to Yes, then press the power button
12. Reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hows the Battery Performance on this ROM? been using XNote for a month and it's an amazing rom. I wonder if this could replace XNote Note 3 being my daily rom thank you so much Fahadali
Can you pls check the contact setting FC? S view cover not working. Dialer full screen caller picture half shown on screen. Contact list is misaligned. Call from contact list shown in wrong position. I am using 289 dpi. Pls check.
---------- Post added at 05:57 PM ---------- Previous post was at 05:52 PM ----------
Battery life is too weak may be due to deep sleep not functional. Tried some deep sleep software seems working.
---------- Post added at 06:02 PM ---------- Previous post was at 05:57 PM ----------
jamiepotter said:
Hows the Battery Performance on this ROM? been using XNote for a month and it's an amazing rom. I wonder if this could replace XNote Note 3 being my daily rom thank you so much Fahadali
Click to expand...
Click to collapse
Hardly the battery life is 5 to 6 hours. But the look and interface is awesome.
Thanks to all for making such ROM a reality.
mazahedi73 said:
Can you pls check the contact setting FC? S view cover not working. Dialer full screen caller picture half shown on screen. Contact list is misaligned. Call from contact list shown in wrong position. I am using 289 dpi. Pls check.
Click to expand...
Click to collapse
Those are known bugs and since this is a port it's bound to have bugs. With time hopefully these bugs will be fixed and this rom will become even better..
mazahedi73 said:
Hardly the battery life is 5 to 6 hours. But the look and interface is awesome.
Thanks to all for making such ROM a reality.
Click to expand...
Click to collapse
Battery life is bearable, should get better with time...
Sent From My SM-N9005 To All You Wonder Nobodies!!
I always reboot my phone every now and then and I discovered a bug in Data Connection it keeps on unticking the APN then I manually choose again from lte to wcdma to get my data connection back. Do you guys have this also? is there a fix ?
jamiepotter said:
I always reboot my phone every now and then and I discovered a bug in Data Connection it keeps on unticking the APN then I manually choose again from lte to wcdma to get my data connection back. Do you guys have this also? is there a fix ?
Click to expand...
Click to collapse
Set your apn settings again manually. Delete old ones and set new .
Then reboot and try.
Sent from my SM-N9005 using Tapatalk
What kernels can be used on this rom?
Sent from my SM-G900W8 using Tapatalk
fahadali2315 said:
Set your apn settings again manually. Delete old ones and set new .
Then reboot and try.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I'll try that later when I get home thank you all foe all your efforts making amazing roms for our device
Sent from my SM-N9005 using XDA Premium 4 mobile app
Drizzy xS said:
What kernels can be used on this rom?
Sent from my SM-G900W8 using Tapatalk
Click to expand...
Click to collapse
Note 3 kernels, eg. N9005/n900t...
Sent From My SM-N9005 To All You Wonder Nobodies!!
fahadali2315 said:
Set your apn settings again manually. Delete old ones and set new .
Then reboot and try.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hello tried this step :/ bad luck didnt work even with clean install its not working
Sent from my SM-N9005 using XDA Premium 4 mobile app
jamiepotter said:
Hello tried this step :/ bad luck didnt work even with clean install its not working
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
New version uploaded v2.1 try that.
Sent from my SM-N9005 using Tapatalk
fahadali2315 said:
New version uploaded v2.1 try that.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
already flashed the latest build btw im running nb1 baseband still having the same problem with data apn
Sent from my SM-N9005 using XDA Premium 4 mobile app
just wondering what the list of 'not working' is. I have been periodically checking the thread and notice it is no longer in the OP of the build thread, is everything working on this most recent build?
cheers
fahadali2315 said:
New version uploaded v2.1 try that.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Man I need to flash this rom....Still haven't gotten around to it..LOL
jamiepotter said:
already flashed the latest build btw im running nb1 baseband still having the same problem with data apn
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Clean flash?
joshndroid said:
just wondering what the list of 'not working' is. I have been periodically checking the thread and notice it is no longer in the OP of the build thread, is everything working on this most recent build?
cheers
Click to expand...
Click to collapse
Current bugs..It was posted along with the new build in the thread..
Deepsleep
Air Gestures & AirView
Smart Gestures
Private Mode
Contacs bug
Set pin/password bug
S-Pen and Aircommand features
Aroma Installer
Edit- Also a user has fixed air command and will uploading it, only screen write doesn't work in it..
Sent From My SM-N9005 To All You Wonder Nobodies!!
Khizar said:
Clean flash?
Sent From My SM-N9005 To All You Wonder Nobodies!!
Click to expand...
Click to collapse
Yes I Clean Flashed the latest build. I really want to use this rom and when im trying to open bluetooth in settings it gave me a FC tried clearing cache and dalvik still having FC I'll try to flash the latest X-Note kernel hope it works *Crossfinger*
Help me friend
After flashing s5 rom porting in my n9005 note 3 i return at stock rom but my gps stopped working not lock i testing more rom and i flashing gps.conf but not works any ideas
rubino90 said:
Help me friend
After flashing s5 rom porting in my n9005 note 3 i return at stock rom but my gps stopped working not lock i testing more rom and i flashing gps.conf but not works any ideas
Click to expand...
Click to collapse
Gps should be fixed after flashing stock rom through odin.
Sent from my SM-N9005 using Tapatalk
fahadali2315 said:
Gps should be fixed after flashing stock rom through odin.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply
But not works for me i have completely wipe (data,cache,system,firmware) and after flash with odin3.09 NB4 stock rom not works any help or suggestion is appreciated thanks again
Related
jhnstn00 said:
I consider Cezar 's rom Methadone as compared to Heroine. I still need the Methadone but I am not constantly flashing different kinds of Heroine from day to day...
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Video review:
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After stock conversion:
New MIUI music player:
Changelog:
v2.3 - 2/16/2011
If you just installed 2.1, let it boot once (initial boot) and then reboot in recovery and install the update, or your phone will end up in a vibration loop
This can be installed over 2.2.
Kernel Speedmod K13B
Dialer now has message button instead of voice mail (more useful)
Moded MMS apk included. Supports picture sending with res up to 1280x800, MMS size max 600KB and SMS to MMS conversion is done at 5 SMSs (default value is 4)
Updated system apps; Updated /data apps
Changed Browser icon - hope you like Chrome
Reverted gps drivers to JPY - please report on performance.
Changed AOSP lockscreen font to Sans (check pictures)
Added latest version of MIUI player
Updated the Continuum_content folder
[FONT=Arial,Helvetica,sans-serif] stock_look_Continuum_5locks_circlebat.zip - removes visual and several sound customizations but it preserves the circle battery and the 5 lockscreens mod [/FONT]
Click here for the full change log and feature list
Few important notes:
For update packs from older versions, check the second post
MODEM RECOMMENDATION: Please flash JPY modem, enable WCDMA 850 (by typing *#2263# - COMBI BANDS - WCDMA 850 (FDD V)
[*]. If the star is not there, tap on that line)and see how is battery life. For me is great. If you have battery drain, you might want to do this. If your connection drops, go to settings - wifi settings - mobile networks and set the type of network to the one has most coverage on your area, GSM or WCDMA
You will have in Continuum_content folder, on your sdcard, [FONT=Arial,Helvetica,sans-serif]the following patches:[/FONT]
[FONT=Arial,Helvetica,sans-serif] i897_prop.zip - this will change your phone's name from GT-i9000 to i897. However you will lose access to Samsung Apps. The patch deletes the apk from the system as well and it installs a working version of Swype + QuickOffice (as ThinkOffice will not work anymore with the i897 build.prop) [/FONT]
[FONT=Arial,Helvetica,sans-serif] TwLauncher4iconsDock.zip - well, no explanation needed for this[/FONT]
[FONT=Arial,Helvetica,sans-serif] stock_look_Continuum_4locks_circlebat.zip - removes visual and several sound customizations but it preserves the circle battery and the 4 lockscreens mod [/FONT]
[FONT=Arial,Helvetica,sans-serif]stock_look_Continuum.zip - this will revert your phone's look to Samsung default framework (no extended power menu, no lockscreens chooser)[/FONT]
[FONT=Arial,Helvetica,sans-serif] delete_bloat.zip - this will delete applications considered as "bloat". Below is the update-script content; you can see which apps are being removed:[/FONT]
Code:
delete DATA:app/adaptive.cogid-1.apk
delete DATA:app/com.chartcross.gpstest-1.apk
delete DATA:app/com.biggu.shopsavvy-1.apk
delete DATA:app/com.escapistgames.starchartlite-1.apk
delete DATA:app/com.handmark.mpp.news.reuters-1.apk
delete DATA:app/com.taptu.wapedia.android-1.apk
delete DATA:app/gr.androiddev.ScreenOn-1.apk
delete SYSTEM:app/aldiko-standard-1.2.6.1-samsung-s1.apk
delete SYSTEM:app/BuddiesNow.apk
delete SYSTEM:app/CarHomeGoogle.apk
delete SYSTEM:app/CarHomeLauncher.apk
delete SYSTEM:app/ChocoEUKor.apk
delete SYSTEM:app/CoolEUKor.apk
delete SYSTEM:app/DeskHome.apk
delete SYSTEM:app/LiveWallpapers.apk
delete SYSTEM:app/PhoneSetupWizard.apk
delete SYSTEM:app/RoseEUKor.apk
delete SYSTEM:app/Days.apk
delete SYSTEM:app/DualClock.apk
delete SYSTEM:app/Layar-samsung.apk
delete SYSTEM:app/MiniDiary.apk
delete SYSTEM:app/MagicSmokeWallpapers.apk
delete SYSTEM:app/PressReader.apk
delete SYSTEM:app/Protips.apk
delete SYSTEM:app/SamsungWidget_CalendarClock.apk
delete SYSTEM:app/SamsungWidget_FeedAndUpdate.apk
delete SYSTEM:app/SamsungWidget_StockClock.apk
delete SYSTEM:app/TATLiveWallpapersAurora.apk
delete SYSTEM:app/TATLiveWallpapersBeach.apk
delete SYSTEM:app/TATLiveWallpapersBlueSea.apk
delete SYSTEM:app/WriteandGo.apk
delete SYSTEM:app/UnifiedInbox.apk
delete SYSTEM:app/VisualizationWallpapers.apk
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Contact me on IRC if you have problems or you wanna say hi
Installation instructions
Disclaimer: If this shall brick your device, make you break up with your girlfriend, make the cat fly, the TV explode and wipe the mankind from the surface of the Earth, I am not responsible!
The ROM was tested on my Captivate. I installed several times to make sure it behaves.
To exclude one cause of battery drain issues always flash this ROM with FULL BATTERY!
This will wipe your /system, /data, /dbdata, /cache.
Internal/External SDcard will remain untouched.
STEP 0: BACKUP! BACKUP! BACKUP! Use nandroid and Titanium Backup
As well please create a backup of your /efs partition as described here
1. Pull out your SIM and external sdcard!
2. Return to stock (those without 3 button combo, use this) <- If you are coming from another i9000 ROM and if you dont have lagfix enabled, this step is not required.
3. Download the ROM
4. Flash from CWM Recovery.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Old ROM links:
Basic ROM comes with K12H speedmod kernel and I9000UGJL2 modem.
This is JPY deodexed and rooted. Nothing else.
Basic ROM wipe
Basic ROM non wipe
Other old downloads
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Issue list, fixes and tips:
This section is continuously updated
First, if you install a different kernel, don't blame the ROM if you have issues.
If you changed system apps (apks) or framework other than what is posted in this thread, don't blame the ROM or the addon pack for making your phone an useless piece of plastic.
If you changed system binaries (drivers, applications -non apks-), again, don't blame the ROM for temporary killing your device.
You may put up a post with your problem and with the changes you made to the OS by yourself. I will do my best to get you out of the situation but don't first rate the ROM as worse and then leave. Everything can be fixed so give me a chance!
Thanks a lot for understanding.
I cannot uninstall system apps with TitaniumBackup. Why? Because TiBu does not mount the /system as RW. Will discuss this with Joel. Workaround: go to SGS Toolbox and tap on mount /system as rw (read/write) then uninstall the applications you want from TiBu. Restart the phone and you're done.
I cannot take MMS video and send MMS with video attached bigger than 300KB what can I do? Take a look here
Mobile data sometimes not working. Fix: make sure you have an APN for your network by going to Settings - Wireless and network - Mobile networks - Access Point Names
My bluetooth doesn't work: Yes it does!
I'm using it myself.
OMG, there are no animations!!! Yes there are! you have to activate them in Settings - Display – Animations
I have high battery drain on this thing. Take a look here
I would like to try new modems and if possible know some stuff about them. Take a look here
I cannot send MMS. Make sure you have your phone configured with the correct Access Point Name and the correct outgoing server number.
Stock email doesn't work/doesn't support exchange. There are several reports that the email app works fine and this ROM was the only one they could run Exchange on so make sure your provider doesn't play with the towers configuration.
The phone is telling me that I was 50% of the time without signal. Why? This could be related to the modem. I am now testing JK4. If you have this bug download and flash UGJK4 modem . As well, make sure that you have WCDMA 850MHz selected by typing *#2263# - COMBI BANDS - WCDMA 850 (FDD V) [*]. If the star is not there, tap on that line and that should be all.
Alternative: There were reports that with JPY modem, this bug disappeared after enabling 850 band and there were no reception problems plus greatly improved battery life
I dont seem to be able to get a GPS lock on this ROM. What can I do? Check this post
What is Control Plane?? Take a look here
How to:
Calibrate battery: (thanks to TechnicR)
Turn phone off and charge till full
Start recovery and wipe battery stats
Reboot and start the phone
Use it heavily until it turns of by itself
Connect charger and turn on the phone and wait until fully charged
GPS: Here is a my tracks recording. Is short but it shows that the GPS works almost without a fault
Feel:
The ROM feels really smooth on RFS, I am surprised how much improvement Samsung made with their file system in 2.2.1.
Thanks and donations go to R64, ericshieh, bedwa, DocRambone, Fr44g0r, creator2456, s0niqu3, Fabolous, camalot, khiyatesh, glitterballs, neldar, Guardian_Bob, MikeyMike01, designgears and others. If you notice someone not mentioned, dont hesitate to let me know.
Special thanks to MaxRabbit for offering a hosting space for all files!!
Addons ~ updated 1/30/2011
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update packs:
Flash from recovery as any other .zip
Update pack from Continuum 2.1 - 2.2 to 2.3
this will not affect your installed applications and settings
If you have problems, perform a wipe install by using the main ROM package found in the 1st post
Update pack from Continuum 2.0 (any variant) to 2.1
this will not affect your installed applications and settings
If you have problems, perform a wipe install by using the main ROM package found in the 1st post------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Themes:
Cezar's Sensation - Home Button haptic feedback fix, optimized extended power menu (no slider, all options are visible) and 4 lockscreens mod.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Themed applications:
Themed market
Themed Gingerbread keyboards
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Will probably give this a shot tomorrow
You rock dude.
Sent from my GT-I9000 using XDA App
Looks interesting. Do you plan to add ad blocking?
Sent from my liberated Captivate via XDA App.
lrs421 said:
Looks interesting. Do you plan to add ad blocking?
Sent from my liberated Captivate via XDA App.
Click to expand...
Click to collapse
Is already added in the Customized version. If you want it in the Stock one you will have to install AdFree Android from the Market.
Feel:
The Stock ROM feels really smooth on RFS, I am surprised how much improvement Samsung made with the FS in 2.2.1
Click to expand...
Click to collapse
Agree, I am not using lagfixes with any of the 2.2.1 I have tested. Giving this one a shot
shaolin95 said:
Agree, I am not using lagfixes with any of the 2.2.1 I have tested. Giving this one a shot
Click to expand...
Click to collapse
You sure? this has no OC/UV. I saw you like to burn your phone
icezar1 said:
You sure? this has no OC/UV. I saw you like to burn your phone
Click to expand...
Click to collapse
I just change the kernel for a smoking one!
Which kernel are you using?.
Sent from my SAMSUNG-SGH-I897 using XDA App
thecellx said:
Which kernel are you using?.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
-xcaliburinhand's 2.2.2
This looks awesome. DLing now will post back with findings.
Just so ya know home button haptic feedback is not kernel related its fixed in android.policy.jar. I had it fixed with jpo but haven't gotten it fixed yet for jpu as it seems to be a little different. But if you put in an android.policy.jar from a captivate firmware, you will have haptic on the home button but a bunch of text string errors.
Just letting more people know since I don't have as much time to mess around and fix as I used to. The more people looking at it, the quicker this issue will be fixed for good.
di11igaf said:
Just so ya know home button haptic feedback is not kernel related its fixed in android.policy.jar. I had it fixed with jpo but haven't gotten it fixed yet for jpu as it seems to be a little different. But if you put in an android.policy.jar from a captivate firmware, you will have haptic on the home button but a bunch of text string errors.
Just letting more people know since I don't have as much time to mess around and fix as I used to. The more people looking at it, the quicker this issue will be fixed for good.
Click to expand...
Click to collapse
Good to know
I've been patiently waiting for a JPX ROM. Thank you kindly.
does bluetooth , i'll test and cee whats its like
tjsooley said:
You rock dude.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I want to get a try.
TKS
justdrew said:
does bluetooth , i'll test and cee whats its like
Click to expand...
Click to collapse
Yes, it works.
shaolin95 said:
Agree, I am not using lagfixes with any of the 2.2.1 I have tested. Giving this one a shot
Click to expand...
Click to collapse
I am taking it for a test drive now. Seems smooth to me too.
this is running super fasat and I haven't run into any issues yet.
anyway we could get the stock launcher?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^ Made by Prototype159
Website(instructions): http://www.miuicaptivate.weebly.com
Sourceforge(old files): https://sourceforge.net/projects/miui9000devs/files/captivate/
Task650's battery mods: http://forum.xda-developers.com/showthread.php?t=1042490
Prototype159 said:
Captivate 1.4.29 RC7b
If you are installing this rom for the first time then you need to visit the website first.
Changelog:
- Language pack updated
- Setup wizard fixed
RC7 -> RC7b
Stock/2.2/>RC7/CM7 -> RC7b
Hopefully you guys can figure out which one to click.
Click to expand...
Click to collapse
Mcord11758's Theme: http://forum.xda-developers.com/showthread.php?t=1036591
Themes/Wallpapers/etc...: http://forum.xda-developers.com/showthread.php?t=1022748
The original thread for the i9000 is here:
http://forum.xda-developers.com/showthread.php?t=992251
^ Remember to thank the devs
Kang Kernels - http://kang.project-voodoo.org/
Kernels
http://forum.xda-developers.com/showthread.php?t=1023732 - Platypus
http://forum.xda-developers.com/showthread.php?t=1007475 - Trident
http://forum.xda-developers.com/showthread.php?t=982337 - Escapists
http://forum.xda-developers.com/showthread.php?t=1009962 - Javelin
http://forum.xda-developers.com/showpost.php?p=12772074&postcount=57 - Flubber
http://forum.xda-developers.com/showpost.php?p=12874024&postcount=78 - Antlion
http://forum.xda-developers.com/showpost.php?p=12979731&postcount=127 - Core low-latency
Modems
http://sourceforge.net/projects/teamhacksung/files/captivate/cm7-captivate-radio-KB1.zip/download - KB1
http://sourceforge.net/projects/teamhacksung/files/captivate/cm7-captivate-radio-JL3.zip/download - JL3
http://sourceforge.net/projects/teamhacksung/files/captivate/cm7-captivate-radio-JK4.zip/download - JK4
http://sourceforge.net/projects/teamhacksung/files/captivate/cm7-captivate-radio-JK3.zip/download - JK3
Signatures
^ Made by Prototype159
Not relevant anymore.
Galaxy S Faq - http://forum.xda-developers.com/showpost.php?p=12077191&postcount=4
[F.A.Q.
Please read before posting any questions!
The latinime and gallery3dold apk's are attached at the bottom of this post
Q: I can't can't make phone calls and/or send messages?
A: Make sure your IMEI is correct. To check your IMEI, go into your dialer and type in *#06#. If it's not correct, go back to stock, flash RC2, and then flash the latest version.
Q: How to flash a newer version of MIUI over an old one
A: Format system, data and cache and install the newer zip. If you do not want to lose data then do not format "data", but if the rom is buggy then do a factory reset and reboot.
Q: How do I install this if I'm coming from CM7?
A: Format data, system, and cache. Flash the MIUI.zip and then do a wipe data/factory reset. Reboot. If you are not flashing Segnaro's package, you will need to flash a CM7 kernel and modem.
Q: I applied a theme, but it didn't change everything?
A: The MIUI Dev's have been changing the theme system recently so themes that have not been updated will not work or will not theme everything. Once the beta gets close to being finished, more themes will created and updated.
Q: Why is the auto-rotation reversed?
A: *If you don't know know how to do most of these things, you should not do it, or ask for more help other wise you might send your phone into a bootloop.
If you download the i9000 package instead of a captivate package, the auto-rotation will be incorrect. To fix this, you need to grab these files from the CM7 rom:
lib/libsensorservice.so
lib/hw/sensors.aries.so
lib/hw/sensors.goldfish.so
After you copy those files to your sd card, download Root Explorer or another file managing app. Go to where those files are located on your sd card, and copy each one-by-one and paste them in the correct spot. You will need to be in R/W mode for this to work. After you paste it and overwrite the previous one, you need to change the permissions for each one to this:
User: X-X-0
Group: X-0-0
Others: X-0-0
X = checkmarks 0 = unchecked
Reboot the phone and auto-rotion should now be correct.
Q: The battery doesn't fully charge?
A: This is a Samsung feature to keep the battery healthy. Once it reaches around 96%, it's charged and you can uplug your phone.
Q: My wifi doesn't work?
A: Reflash the kernel. If that doesn't work, you may need to reflash the rom.
Q: My statusbar icons turn either gray and green?
A: This is a feature of Android 2.3. Gray means you have a signal/data and green means you have a signal/data and are connected to the google servers.
Q: The notification menu is in Chinese!
A: A simple reboot should resolve the issue.
Q. Why can't this be flashed with one CMW zip?
A. This rom is a port from the nexus s version. It is built on CM7 in order to correctly partition the device. The initial kernel flash via Odin can not be replicated via clockwork.
Q: When I get a call or call someone, my screen turns black!
A: Hit the power button a couple of times until the screen turns back on. If that does not work or it keeps happening, go to Settings, Call Settings, turn off proximity sensor and when holding phone up to face make sure you turn screen off using power.
Q. I have no data what should I do?
A. Toggle screen off and on a couple times.
Q: I can't download anything from the browser/market/etc.?
A: Try these options in order:
- Go into the 'Downloads' app on your phone, hit the menu button, and select, "Download using Mobile network." Reboot.
- Go into Recovery, wipe data/factory reset.
Q. I am using a kernel that allows for under volting, but I can't get the sliders to move in voltage app.
A. Known issue, with persistence they will move.
Q. How can I go back to 2.2 Roms?
A. Odin flash stock with repartition. One click will do, provided you can use it on your device.
Q. Can I use the camera from my favorite 2.2 rom?
A. No, there is no twframework because this is not a Samsung rom. Nothing Samsung will work.
Q. Can I use a Samsung App from my favorite 2.2 rom?
A. No, there is no twframework because this is not a Samsung rom. Nothing Samsung will work.
Q. Why is battery life so bad?
A. Known issue for this and CM7. Currently it is not fully optimized for our device.
Q: Can I use a different kernel?
A: Yes, you can use any Captivate CM7 kernel.
Q. I tried to toggle 2g and now I have no signal.
A. 3g/2g toggle works but you must disable data first. To get data back go to recovery wipe cache and davlik cache. Reboot. If that does not work try a modem flash or reflash rom.
Q: I installed swype, but it doesn't seem to work?
A: Download the Swype Installer from here. Follow the instructions all the way until the end until you get to the end. Reboot the phone and swype will now work. If you already tried to install swype, please clear the data on swype and swype installer and then uninstall both. Then try the fix.
Q: Why am I getting duplicate contacts after installing this Rom?
A: Log into your Google account online. Go into your account settings, view data stored with this account. Manage contacts, click the got duplicates button.
Q: Every time I flash MIUI, I reboot into CWM.
A: Go into Mounts and Storage
- Format System
- Format Cache
- Format Data
Q: Why can’t I make calls or connect to the mobile network?
A: Check to make sure your IMEI is correct. If not correct, flash RC2 then the version you were previously trying to install.
Q: After flashing the newest rom, my keyboard does not auto correct anymore.
A: Download the LatinIME.apk from the bottom of this post. Using Root Explorer move the LatinIME.apk into system/apps and change permissions to RW-W-W
X X O
X O O
X O O
Q: Why is my camera showing black?
A: While in the camera application, toggle your screen on and off.
Q: My 3d graphics aren’t as good as they were on previous versions.
A: They have been fixed in the newest update.
Special thanks to tae_254,mcord11758 and Prototype159 for making the FAQ section
New Changelog Page: http://miuicaptivate.weebly.com/change-log.html
RC5-C
- GPU Fixed
- 3D Gallery Added
RC5-B
- Fixed keyboard
- Latest language pack
- Android Camera removed
- CM File Manager removed
RC5
http://forum.xda-developers.com/showpost.php?p=12924456&postcount=3443
RC4-C
*RC4C Package
*Working Auto Rotation
*Newest Kang kernel
*Both SD cards mount
*JK4 Modem
*New translation pack implemented
*New bootanim without miui-dev text (seems a bit laggish though compared to their one so may replace it)
*SD Card speed fix
*and other little things!
RC4-B
*"Sending..." is gone from the text messages
*Fast GPS fix
*Compatibility mode fix
*wifi fix
*Upgraded all packages to 1.4.8
*New Android 3.0 music included
*Some system tweaks added
*Newest Kang Kernel (includes notification lights and 1.3 OC)
*Working Auto Rotation
*Jk4 modem
*Efs backup
RC3c
*Optimised and improved boot animation quality
*Fixed Chinese text in Edit contact mode in Contacts.apk
*Added improved strings to Gallery.apk
*Added improved strings to FileExplorer.apk
*Added improved strings to ContactsProvider.apk
*Added improved strings to Settings.apk
*Added improved strings to Mms.apk
*Added NEW MMS INTERFACE (3rd Edition UI) (Thanks g00ndu as well!)
*Added improved strings to Notes.apk
*Added improved strings to Phone.apk
*ROM Deodexed (Thanks Segnaro)
RC3
*Improved stability
*Some clean ups
*Updated package to 1.4.1
FULL RELEASE Rc2
*Fixed WiFi
*Maps doesn't crash
*Removed Terminal Emulator (works ok if you download it from the market)
*Theme manager/downloader now FULLY working
BETA 8:
*Based on new Official package by MIUI-Dev team!
*MIUI camera working
*Packages updated to 1.3.25
*File explorer doesn't crash
*Smaller size
*Cleaned up zip
BETA 7:
What you CAN expect:
*Everything stated in OP works APART from EXT SD Card! HUGE Thanks to Segnaro for fixing the Internal SD!!
*New Lockscreen
*Fixed colours
*New layout of pull down bar
*Translated to English
*BLN
*Some more stuff i can't remember!
What you SHOULDN'T expect:
*Working EXT SD Card
IF you're WiFi doesn't work at first boot, reflash this Kernel: http://kang.project-voodoo.org/f/CM7/GT-I9000/CM7_GT-I9000_kernel_kang_20110325_02_update.zip
You HAVE to reboot after installation to get rid of all Chinese translation!
Changelog Beta 6 :
-Applied fixes (Theme manager, Compatibility mode apps) by Segnaro (THANK YOU!!)
-Stabler ROM
-Camera fixed
-Some packages included and some others updated
-Fixed script of mounting sdcard...so no need of dirty fix of init.d or terminal
Beta 5
What works:
-Internal SD card media detection (NOT EX
Already mentioned but just giving a little more detail. Auto-rotate doesn't seem to work on the home screen (possibly supposed to be this way?) and the menus rotate opposite from how you would want them to do so. Trying a different kernel now to see if it changes anything.
Other than that, I am loving the UI. Can't wait for the finished product.
EDIT: Issue persists with TheEscapist's CM7 kernel. Temporary solution is to disable auto-rotate. All menu's show up normally this way, but you can't view anything in landscape mode.
Yeah the auto rotate is kind of annoying I can't get it too work properly. Btw did you follow my instructions for the flash? I don't really care I just wanted too see if I listed them right lol and the media files don't seem to work with apps sometimes also , just putting that out there
Sent from my SGH-I897 using XDA App
make sure to include you MUST have 3 button recovery working to install this
Im assuming that data still does not work correct?
hey, i'll be the dumb guy!
why the **** is this all in chinese? I know MIUI is a chinese rom, but i would just....i dunno, assume somebody woulda ported it to english?
also, are the graphics always this laggy?
nm on the laggy part, that went away
whitesox311 said:
nm on the laggy part, that went away
Click to expand...
Click to collapse
Data does not work right?
so far havent got a radio signal with either KP1 or JL3
wifi is rebooting.....a lot
everything is in....chinese
if screen turns off, phone turns off.
generally unstable, comes with all the cyanogenmod baggage
(captivate 1007 build, btw)
whitesox311 said:
so far havent got a radio signal with either KP1 or JL3
wifi is rebooting.....a lot
everything is in....chinese
if screen turns off, phone turns off.
generally unstable, comes with all the cyanogenmod baggage
(captivate 1007 build, btw)
Click to expand...
Click to collapse
Go to the settings and find a way to change the language, I forgot to note earlier your supposed to change the language at initial setup. What kernel are you running?
Sent from my SGH-I897 using XDA App
mossination said:
Go to the settings and find a way to change the language, I forgot to note earlier your supposed to change the language at initial setup. What kernel are you running?
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
i am running the kernel in the prepackaged build (bilboa's cm7 kernel) that segnaro posted.
thanks, btw
hey moss, can you give me some visual cues on how to change the language (as i speak zero chinese)
Dlev7 said:
Data does not work right?
Click to expand...
Click to collapse
Yes data works. This is a new build than from before. This one comes from the Nexus S that was ported over to the I9000. All the CM7 work has now opened up this rom to us Galaxy S users.
whitesox311 said:
i am running the kernel in the prepackaged build (bilboa's cm7 kernel) that segnaro posted.
thanks, btw
Click to expand...
Click to collapse
Try flashing another Captivate CM7 kernel. You may have the i9000 kernel installed. Also install the JK4 modem from the CM7 site.
whitesox311 said:
hey moss, can you give me some visual cues on how to change the language (as i speak zero chinese)
Click to expand...
Click to collapse
Try flashing the kernel I used in the first post and as for the language. Hit menu / third tab / nine down / 2 down
Sent from my SGH-I897 using XDA App
nm, i found it somehow
but now that it's in english, the first screen and the screen to the right of it freeze every time im on them
i dunno if im just unlucky (like i was with CM7), but i'd say this is far from stable
whitesox311 said:
nm, i found it somehow
but now that it's in english, the first screen and the screen to the right of it freeze every time im on them
i dunno if im just unlucky (like i was with CM7), but i'd say this is far from stable
Click to expand...
Click to collapse
I'd say very unlucky has it has been very stable for moss, me, and others.
doctahjeph said:
Try flashing another Captivate CM7 kernel. You may have the i9000 kernel installed. Also install the JK4 modem from the CM7 site.
Click to expand...
Click to collapse
okay, can do.
it's definitely not a i9000 kernel, but i'll try the legit kernel with JK4 and see what happens
i used all the stuff from segarnos post right after the OP in this thread....btw
This Rom is also available for Samsung GT-I9000 variant from HERE.
There is also a port for X-Bean from GT-I9000 from HERE.
This is it folks. If you think you've seen fast, you're in for a surprise! Please NO derivative work without permission.
LANIGHT is a pure AOSP build, meaning it is NOT CM or built from CM source, so please do NOT ask for CM features. However, it does use device/hardware files from CM10 and rest from Nexus S.. so any device specific problems that is in CM may or may not be in LANIGHT. If you don't like AOSP, move on.
I will rarely post on the thread mostly because of well known reason. It is a development thread, if you can't flash or download apps(Gmail and such) from market or simpler tasks, YOU ARE spamming the thread. Help yourselves by flashing stock firmware from Kies. Remember, I can't fix stupid or lazy. Please read the whole OP and search before you start typing. There has been NO bug that i have faced since my first release except the ringtone problem(4.2)(SOULTION) which has been solved with the latest release(5.2). If you have WiFi problems, flash anything 2.0 and above or below 5.2 (For 5.2 FLASH THIS.) because there is no telling what is the issue, i didn't face that issue so i don't know unless you provide log.
Code:
[U][B][COLOR="Orange"]FEATURES[/COLOR][/B][/U]
[LIST]
[*]Zillion commits has been added since initial release!
[*]Android 4.1.1 JellyBean
[*]DataData Partition & NODATADATA partition
[*]Speed and Cleanness of AOSP
[*]Devil Kernel Config
[*]Droid bootanimation
[*]Stock theme
[*]Nexus S HW acceleration (Thanks to mkalter)
[*]working mount of external SD to PC (Not tested)
[*]Devil3_1.0.4_cappy_CFS_BLN_VC (Datadata)
[*]Extreme Fast and rock-solid
[*]GPS Hack which would make it fast (Thanks to mikel.canovas)
[*]KC1 Modem(datadata) & JVT(nodatadata)
[/LIST]
WHY IS THIS BETTER THAN THE OTHER ROMS?
Speed++, functions and most stabe
This is pure AOSP!
This is not just another AOSP, this is a completely new project!
look at the Features list for more
Click to expand...
Click to collapse
INSTALLATION (FOR DATADATA)
Read this if you might find problems in flash process
Keep a copy of efs folder for security
Reboot into recovery
Make a nand backup before you proceed
Wipe data/ factory reset (DO THIS 3X TIMES)
mount -> Wipe System/cache/data/datadata
Wipe cache/ cache partition
Advanced -> Wipe dalvik cache
Wipe voltage cache (If the option is given)
devil -> run clean NStools options
devil -> run clean init.d directory
install rom zip from sdcard
flash zip again
reboot your phone
Click to expand...
Click to collapse
Clean Flash if coming from any DATADATA(HellyBean per say) rom
Keep a copy of efs folder for security
Reboot into recovery
Make a nand backup before you proceed
Wipe data/ factory reset (DO THIS 3X TIMES)
mount -> Wipe System/cache/data/datadata
Wipe cache/ cache partition
Advanced -> Wipe dalvik cache
Wipe voltage cache (If the option is given)
devil -> run clean NStools options
devil -> run clean init.d directory
install rom zip from sdcard
install rom zip once again (just to be on the safe side)
Wipe data/ factory reset
Advanced -> Fix permissions
reboot your phone
Click to expand...
Click to collapse
DOWNLOAD
ROM:
Download LANIGHTv1_DATADATA(stable release) from HERE
Download LANIGHTv2_DATADATA(stable release) from HERE (Thanks dave71670 for slimming)
Download LANIGHTv2_NODATADATA(stable release) from HERE (flash this if you have wifi problems with datadata)
Download LANIGHTv3.2_DATADATA(stable release) from HERE (Thanks Cbalt for figuring out partition layout problem)
Download LANIGHTv4.0_NODATADATA from HERE (changelog is similar to 4.2)
Download LANIGHTv4.2_DATADATA(stable release) from HERE (Recommended)
Download LANIGHTv5.2_NODATADATA(stable release) from HERE (Recommended)
Download LANIGHTv6.0_NODATADATA from HERE
Download LANIGHTv6.5_DATADATA(stable release) from HERE (Recommended)
Download LANIGHTv8.0_DATADATA(stable release) from HERE (Recommended)
Download LANIGHTv8.5_DATADATA_alpha from HERE (Test version)
Click to expand...
Click to collapse
THEMES/Mod
-Fix Logcat, SMS and Gallery/Camera FC from HERE
-Patch to fix ringtone problem
-Patch to fix WiFi AND Lagfix
-Patch for TV out was posted in v4.2DD
-Here's virtual on screen button key map zip: http://forum.xda-developers.com/showpost.php?p=32109290&postcount=781
-This script will delete your Gallery and Messaging app
-Read the FAQS for more. Here's a work around for installing apps if you are running 6.0NDD
-Here's a patch for video playback if you are facing that issue
-More fixes and patches also added a zip that will add your SMS and Gallery back from HERE
Theme-able messaging app
My personal favorite theme by Sephhi from HERE
HERE's an awesome theme
Here's another THEME
Another amazing theme THEME and HERE's more complete version of it. And Here's another complete version...
Theme for 6.0
Theme for v6.5 can be found on this link
Theme for v8.0 from HERE
Theme for v8.5DD from here
Click to expand...
Click to collapse
CREDITS
Cbalt (For amazing advise)
treau (For the awesome logo!!)
XYunknown (For some files from X-Bean)
Elitemovil(For the basic base)
Bigixie (Gnex share rom)
dave71670 (For his advice and help testing)
Be18
Pawtip
CM10 Team
TeamHacksung
Steeve76
HP40
iall5tar
DerTeufel1980 (Kernel)
mkalter
H3llstorm(For GPS hack)
Google for android
Samsung for the hardware
Click to expand...
Click to collapse
Hit thanks button and/or consider small amount of donation if you think i helped.
FAQs are HERE.
Here's what you can do if you are facing battery drain problems(I put together this battery help thing back in Darkyrom website. Out-Dated but most of it still applies):
- Toggle airplane mode couple of times
- Calibrate the phone and read the guide(There are some helpful tips) OR
- use dark themes and wallpapers, avoid live wallpapers. OR
- There must be some app that stays open in the background and knocking on your battery life head on. Grab BetterBatteryStats from the market, find the offending crap and uninstall it OR
- Try a different kernel OR
- Try a different modem OR
- uninstall tw4 OR
- try fast dormancy OR
- Download Juice Defender OR
- Try search for "CSC" either on google or on here and pick the right country (Does not apply for US users) OR
- Go to "Applications / Settings / Display / Animation / No animations."
- Go to "Applications / Settings / Applications / Samsung Apps" and check "Disable"
- Go to "Applications / Settings / Location and Security" and check "Use Network", "Using GPS satellites" and "Using help of sensor" (off course "Using GPS satellites")
- Overclocking also impacts your battery life!!
- Enable Force Gpu Rendering on Developer Options
- Disable auto sync for accounts
- Disable GPS and wifi when you dont use
- Disable automatic brightness and set a low level
- Disable auto rotate if you don't use
- Disable data usage setting
- Disable any Sytem animations
- Disable any Launcher animations
- Disable Widgets in Drawer option on Launcher settings-Drawer
- Disable error-usage reports on launcher settings
- Disable logging and notifications at Superuser settings
- Disable outdated binary notification at Superuser setting
- Disable any unwanted notifications
- Use dark background(avoid live wallpapers!)
- Use dark themes
- Dark icons
- Change Launcher
- Disable "auto update" at file explorer settings...
- Buy a new battery
- If all else fails, flash RE again (Refer to step# 3).
NEWS
Here's a list of so far helper's i found(will be putting them on the op):
Code:
dave71670 (slimmed versions, amazing advices, thread maintainer)
ChuckDaEngineer (our thread maintainer/themer/tester and pretty much anything i can find for him xD)
treau (For our future banner)
nygfan760 (slimmed versions/Themer/tester)
So, get to know them! (i will add as we get more people)
Fiiirrrsssttt!!!
Sent from my SGH-I897 using xda app-developers app
tkjeeper said:
Fiiirrrsssttt!!!
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Rom is up. Let me know your feedback.
Downloading will take it for a spin.
dave71670 said:
Downloading will take it for a spin.
Click to expand...
Click to collapse
Thanks a bunch!
EDIT: Gotta put you in credits for the push
Gonna give it a try!
Downloading now.. Will get back with my feedback soon.. And yes, thanks AceofSpades90 for the new choice for our good ol' Cappy..
Definitely gonna try this out. Any reasoning behing using 1.0.4?
nygfan760 said:
Definitely gonna try this out. Any reasoning behing using 1.0.4?
Click to expand...
Click to collapse
No reason, just a bit cautious. Will update kernel in future.
EDIT: Trying out newer kernels to see which one works and which one doesn't, use this kernel for now unless you wanna help test newer kernels.
swam1231 said:
Downloading now.. Will get back with my feedback soon.. And yes, thanks AceofSpades90 for the new choice for our good ol' Cappy..
Click to expand...
Click to collapse
As long as there are Nexus sources floating around, this baby will up and kicking
AceofSpades90 said:
No reason, just a bit cautious. Will update kernel in future.
EDIT: Trying out newer kernels to see which one works and which one doesn't, use this kernel for now unless you wanna help test newer kernels.
Click to expand...
Click to collapse
I'm going to pull the kernel from the newest helly bean and test it.
nygfan760 said:
I'm going to pull the kernel from the newest helly bean and test it.
Click to expand...
Click to collapse
Thanks for that. Hows the rom feel like? snappy or what?
EDIT: Not sure about the latest since he been using LVM partitioning on 08/20 onwards? I'm not sure this rom is compatible with it? If it is then its all the reason for me to support this rom till the HB exist.
EDIT EDIT: I might have to steal some of your init.d tweaks from your MIUI rom for my next version
just flashed and followed all directions and wifi couldnt be turned on. changing modems and kernels didnt fix either
Sword_of_a_1000_truths said:
just flashed and followed all directions and wifi couldnt be turned on. changing modems
Click to expand...
Click to collapse
Yes, change modem please. It's most likely a modem issue for sure.
Sword_of_a_1000_truths said:
and kernels didnt fix either
Click to expand...
Click to collapse
What do you mean? Try flashing 1.0.4 datadata cappy kernel.
EDIT: Flashed this build 4 times and still no problem with wifi or kernel. Did you wipe?
yea i wiped several times, ill try kernels and modem combos again again
oh and also ext sd card wouldnt mount in USB mode only internal so im guessing its kernel related again
Sword_of_a_1000_truths said:
yea i wiped several times, ill try kernels and modem combos again again
Click to expand...
Click to collapse
No, listen just flash JVT or whatever modem you used to use on your previous JB build. Why are you swapping kernels? I don't understand. Did you have this problem before?
EDIT: Also, let me know which datadata kernels work for you. I need to know for my future release.
Sword_of_a_1000_truths said:
oh and also ext sd card wouldnt mount in USB mode only internal so im guessing its kernel related again
Click to expand...
Click to collapse
This is an old kernel and i choosed it for cautious purposes. Please don't poke around and cause yourself problems. Flash X-Bean or CM10 or AOKP first and try this rom. May fix it.
About the Ext SD card. I don't have an External SD card to test so that's why i put in the op it's untested. Not necessarily kernel related.
i did flash a modem i used with CM10 and wifi still couldnt turn on, and USB mount of ext sdcard problem was with kernel it came with right out the box. thats why i swapped kernels, but yea ill let u know which datadata kernels i use. just gotta find those kernels. havent kept up with all the new stuff and just saw this at the top of the forum
i been flashing this phone for years so i have a lil bit of clue of what im doing. i can usually solve some of my problems
Credits to sakurawarskula for this epic rom.
Thread: anzhi.com
Theming works
No root problems, like there is with other MIUI roms
Great battery life
Superb 3D performance
Everything works
If you want more info, go to official thread, and translate it.
Instalation:
Code:
be sure you are on official gingerbread or gb bassed custom rom.
boot into recovery,reboot recovery
wipe data/factory
wipe cache
wipe dalvik
wipe battery stats
format system
reboot into recovery
Do the same wipes again for a second time
install the rom
reboot normally
reboot into recovery and install ''20130101_U8800Pro-MIUI2.3.7 by FCS fix 20130104-12_update.zip''
reboot normally
reboot into recovery and install atmel fix zip (if you are on atmel)
reboot normally
reboot into recovery and install geno's gapps
reboot normally play a bit with the new rom
reboot normally again
Links:
ROM: http://www.mediafire.com/?hi637716r3dkua7
Final patch (the only one needed):http://www.sendspace.com/file/li9b3c
- atmel fix patch : http://www.sendspace.com/file/7f5nkr (only for those with atmel screen,check previous posts) (install in recovery)
- geno's gapps : http://www.sendspace.com/file/ynvpky (install in recovery)
- flash player : http://www.sendspace.com/file/h6p3mo
- new miui compass : http://www.sendspace.com/file/4x6are
- english versions of system apps (where needed) : http://www.sendspace.com/file/vwtiw8 (place in /system put correct permissions,move to system/app and replace,reboot) compass and flash player can maybe be installed normally,i don't remember. (THIS IS NOT A FLASHABLE ZIP,unzip manually)
- full translated changelog from Sakura (from google translate,needs some imagination..!) : http://www.sendspace.com/file/pm7gtv
- Hosts file from Kalo rom (needed to connect properly to google account) : http://www.sendspace.com/file/nuodvz (move to /system put correct permissions,move to /system/etc replace,reboot)
- gps.conf for EUROPE users : http://www.sendspace.com/file/x94ct0 (same installation as hosts file)
BONUS : Kick ass theme --> MeeUi,try it! : http://www.sendspace.com/file/gkeaxz Move to sdcard/Miui/themes and install from theme manager
To change to english when first installing press menu button,then the gear icon button,then the second panel from the 3,then in new screen the keyboard icon.
If you want to light up buttons, do this:
With root explorer go to /system/etc/init d and delete (or save somewhere in case you change your mind) the file ''Z90closeButtonLight'' .Reboot.Let the lights hit you!
What languages are present?
I left build.prop as is, so language is chineese, but you can change it trough settings to english. There are no aditional languages.
How much free RAM?
Moribus said:
Credits to sakurawarskula for this
How to install:
1. make sure you have 2.3 based rom
2. download the ROM put it into memory card
3. install it with recovery
4. install all 7 fixes
5. reboot
Click to expand...
Click to collapse
I have downloaded the ROM from original site and flashed as per your recommendations in STALLION thread. It's great. I have some queries.
1. There were five patches whereas you have given seven.
2. How do you lock the screen? Is it only to be locked with POWER button. I use third party screen lock app tied up with long press search button which is not working here as this function is tagged with camera. Any alternative for screen lock?
Didr said:
How much free RAM?
Click to expand...
Click to collapse
140-160mb
parthabhatta said:
I have downloaded the ROM from original site and flashed as per your recommendations in STALLION thread. It's great. I have some queries.
1. There were five patches whereas you have given seven.
2. How do you lock the screen? Is it only to be locked with POWER button. I use third party screen lock app tied up with long press search button which is not working here as this function is tagged with camera. Any alternative for screen lock?
Click to expand...
Click to collapse
1. Sorry, i made a mistake, there are only 6 of them, not 7. I dont know why u have only 5, and it doesnt realy matter.
2. I dont use any buttons to lock, screen timeout locks itself, or i use power button, but if u want, u can use search button, by doing this:
System Settings>System>Button>MI button>Trigger Toggle>Lock
parthabhatta said:
I have downloaded the ROM from original site and flashed as per your recommendations in STALLION thread. It's great. I have some queries.
1. There were five patches whereas you have given seven.
2. How do you lock the screen? Is it only to be locked with POWER button. I use third party screen lock app tied up with long press search button which is not working here as this function is tagged with camera. Any alternative for screen lock?
Click to expand...
Click to collapse
I installed this rom yesterday from the chinese sources,you don't need all the 6 patches.There are 5 update patches and the 6th is the one you need,this is the final patch that includes ALL the other ones (20130101_U8800Pro-MIUI2.3.7 by FCS fix 20130104-12_update.zip)
to OP:There are 4 other files that came with the rom and i don't see them in the post.They are Sakura's Atmel screen fix,geno's gapps,flash player for this rom and the new miui compass that was not included in the original rom.If you don't have them tell me to upload them
If you want to put power button to search button go with root explorer to system/usr/keylayout open qwerty.kl with text editor,find key 217 and change it from ''CAMERA'' to ''POWER' and in the same line from ''WAKE DROPPED'' to ''WAKE'' .Save and reboot.Now pressing the search button closes the screen,long pressing it brings up the power menu.
People this is the best MIUI so far and the latest one with final release date 14/1/2013,Everything works.This is a special rom started by Geno,then Hay modded it,then Ry09iu modded it farther and lastly Sakura combined the mods of all of them together with his own and released this amazing rom.you got to try it
---------- Post added at 12:51 PM ---------- Previous post was at 12:44 PM ----------
Didr said:
How much free RAM?
Click to expand...
Click to collapse
No worries about ram unless you have 200apps installed like all roms
installation:
be sure you are on official gingerbread or gb based custom rom.
boot into recovery,reboot recovery
wipe data/factory
wipe cache
wipe dalvik
wipe battery stats
format system
reboot into recovery
Do the same wipes again for a second time
install the rom
reboot normally
reboot into recovery and install ''20130101_U8800Pro-MIUI2.3.7 by FCS fix 20130104-12_update.zip''
reboot normally
reboot into recovery and install atmel fix zip (if you are on atmel)
reboot normally
reboot into recovery and install geno's gapps
reboot normally play a bit with the new rom
reboot normally again
THIS IS THE BEST WAY
You also need to replace some chinese system apps with the english ones,i will upload them later with instructions
and also replace some files like hosts,gps etc.i will upload them too.
please OP add these to the first post because there will be confusion!
Moribus said:
140-160mb
1. Sorry, i made a mistake, there are only 6 of them, not 7. I dont know why u have only 5, and it doesnt realy matter.
2. I dont use any buttons to lock, screen timeout locks itself, or i use power button, but if u want, u can use search button, by doing this:
System Settings>System>Button>MI button>Trigger Toggle>Lock
Click to expand...
Click to collapse
Thanks it works.
korekore1 said:
to OP:There are 4 other files that came with the rom and i don't see them in the post.They are Sakura's Atmel screen fix,geno's gapps,flash player for this rom and the new miui compass that was not included in the original rom.If you don't have tell me to upload them
Click to expand...
Click to collapse
Upload them if u can, ill add them to first post.
To korekore.
Great post. Very supportive.
I agree to you with first point. Five patches replaced by one single patch and I am using the same.
I will surely try your method OF search key lock /power button. I will surely try that.
Lately there are four more files of which I am using the gapps lite. My touch screen send to be working ok and I have not flashed the atmel kernel mod. BTW how to know whether I have a ATMEL or SYNAPTICS hardware?
Lastly waiting for Your English version apks.
Great ROM. Dream of similar JB ROM.
Thank you.
parthabhatta said:
To korekore.
BTW how to know whether I have a ATMEL or SYNAPTICS hardware?
Thank you.
Click to expand...
Click to collapse
On your phone dialer you dial *#*#2846579#*#*
A menu will appear,then you go to project menu->upgrade->touchscreen firmware upgrade->touch screen version query and it will show you if it is ATMEL or SYNAPTICS.
Be aware however that this menu does not appear on all custom roms. For example in CM7 if you try it, nothing will happen.
For what is this FIX?
For me the 4 button does not lighting
Sent from my U8800pro using Tapatalk 2
dingila said:
For what is this FIX?
For me the 4 button does not lighting
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
That fix improves speed, stability, adds V6 SuperCharger script, improves power saving, etc.
No button backligt is not a bug, but you can "fix" it by doing this:
Download any root exploring app, go to sys>class>leds>button-backlight> edit it like text, and write 255>save it
@ntonius said:
On your phone dialer you dial *#*#2846579#*#*
A menu will appear,then you go to project menu->upgrade->touchscreen firmware upgrade->touch screen version query and it will show you if it is ATMEL or SYNAPTICS.
Be aware however that this menu does not appear on all custom roms. For example in CM7 if you try it, nothing will happen.
Click to expand...
Click to collapse
Nothing happened with the command in the current ROM.
Sent from my U8800pro using xda premium
R: [ROM 2.3] MIUI - 3D performance + smooth + power saving + stable
Can someone upload screenshots? Thanks
Sent from my U8800Pro using xda app-developers app
parthabhatta said:
Nothing happened with the command in the current ROM.
Sent from my U8800pro using xda premium
Click to expand...
Click to collapse
Yes,I tried it too on MIUI but like CM7 it doesnt work in these roms. It works on official/stock rom 100%, i checked it on my official rom before installing this MIUI.
If you have a recovery backup of the stock/official rom you can restore the official rom and try it there, it will work there 100%.
Which kernel to b flashed for this Rom?
Sent from my X10i using xda premium
if anyone use it let's tell us if this rom is for one day or for often use and someone please post screenshots
korekore1 can you upload the four files you were talking about before and the final patch?
Thank you.
Screenshots
Sent from my U8800pro using Tapatalk 2
X-Note build 18.0 N9005-NF4
OFFICIAL DISCUSSION BOARD
FOLLOW X-NOTE RULES
ORIGINAL DEV THREAD X-NOTE
X-NOTE ROM UPDATES VIA OTA LINK
Guys,
I am please to create this Discussion thread of X-NOTE ROM .
We have done enough discussion about The ROM in DEV thread which is suppose to be made for Dev discussion only.
Please Feel free to discuss about the X-NOTE ROM. Please Don't Spam in this thread.
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Disclaimer :
Devs of this Rom are NOT responsible for any damage to your device.
The installation of the ROM is at your own risk.
However, the flash procedure is always performed
at least three times with a day of testing.
FOLLOW THE INSTRUCTIONS PROVIDED in X-Note Thread.
ROM version: X-Note build 18.0 N9005-NF3
SUPREME CHANGELOG
Based on samsumg firmware ND5 modified to have region free
moved lots of application in /data partition to have more free space in system (do a wipe data before install as written in instructions)
allowed installation of thirdy part apk from first boot
added the new circle system ui theme selectable with xnote app
reintroduced home button in status bar with ability to choose position (xnote app)
reintroduced status bar color & transparency selection (Xnote app)
Added new shoot-it toggle that launch the great @dr.ketan apps (included):
-single tap>take a silent camera shot
-longpress>take a shot with autoflash
changed system ui switching method
added keyboard switching method, select your theme via x-note app and your phone will autoreboot with the new theme (10 themes available):
-black
-grey
-samsung stock
-white
-leather blue
-leather black
-leather brown
-leather gray
-leather red
-leather brown premium
all backup switching files (systemUI & keyboards) are automatically stored in internal sdcard in a new folder called xnote (don't delete)
video gallery replaced with the GS5 one (already multi dpi)
Scrapbook replaced with the GS5 one
one hand feature from galaxy s5 modded (replaced recent button with menu button) with favourite app list and contacts shorcuts
added x-note default tw theme as workarond for missed S-Note icon with s5 tw launcher
s5 launcher modded multi dpi 5x4 home grid, 9 home screens, 5x6 app drawer, tw themes enabled and compatible with standard launcher too (select your theme using x-note app)... credits @Arsaw for the ported base app (all added into aroma, standard tw launcher available as always)
two new tw launcher themes included in the rom:
gold theme
moonshine theme
s5 wallpaper chooser available if you select s5 tw launcher in aroma + pull up apk to allow note 3 my magazine launch from homescreen credits @fakejap devs
s5 splanner multi dpi ready + themed (aroma)
s5 my files multi dpi ready + themed (aroma)
s5 meteo widget multi dpi ready (aroma)
s5 air wake up function (x-note app - experimental) to wake the device with a air gesture (see the instructions on screen
9 keyboard themes (aroma) the leather texture was restyled for a premium feel:
black
grey
samsung stock
white
leather blue
leather brown
leather gray
leather red
leather brown premium
restyled bootanimation by @meawww (thanks my friend)
viper for android updated
almost all apps updated
moved more app in /data to have more space in /system
reworked system ui - new x-note toggle (available in settings to allow order selection):
tap -> launch X-Note app
longpress -> launch X-Trasformer app
If you don't see the X-Note toggle at first boot go to X-Note app > additional script Xnote > add/restore toggle > enable all toggles and reboot
home button wake enable/disable
status bar clock right-center-hide
status bar clock font selection - 5 fonts available
enable/disable date near the status bar clock + small/big font selection
uppercase/lowercase/normal font selection for status bar date if enabled
18 available date format: dd-mm-yyyy / EEEE-mm-dd-yyyy / etc.
network indicator now shows upload/download speed + option to hide if no traffic + 4 update frequency available: half second, 1 second, 2 and 5 seconds
power menu show/hide feature, you can:
show/hide data mode
show/hide airplane mode
show/hide power off
show/hide restart
show/hide accessibility
show/hide sound mode bar
show/hide cpu core widget in notification panel
status bar clock color selection
notification panel clock color selection
notification panel date color selection
notification panel cpu core widget color selection
TW THEMES
- X-NOTE MOONSHINE
- X-NOTE GOLD
X-Kernel V.2.1 - only for N9005
UPDATED TO LATEST SAMSUNG OFFICIAL SOURCES
Close to stock for stability and best battery
Selinux status = Permissive
ExFAt support
init.d support
insecure & adb insecure
Add swap support
Add CIFS support
Add NFS support
Add NTFS support
Add Xbox controller support
Add cdrom option to UMS-lun-devices
Add DriveDroid support
USB: f_mass_storage: 2048 block size for cdrom devices
USB: f_mass_storage: Added cdrom option to UMS-lun-devices
Click to expand...
Click to collapse
Download Links :
ANDROID FILE HOST
LINK
THANKS TO ,
@soloilmeglio and @xentrix
For other variants please follow this quick and easy guide by @Khizar on how to make this rom work on your note3. Dont forget to thank him.
LINK
fahadali2315 said:
Please guys, there would be no help given if the problem is not because of xnote.
Before asking mods related stuff please check if there is an xposed module active as almost all the time that seems to be problem.
And for people having 4g issues. This thread is for N9005 ,not for any other variants. We still try to help as much as we can. But dont move questions between threads.. if you need help. Pm users like @djbrian52 @Upstreammiami @Ark1406 as they are pretty helpful when it comes to other variants. As for other questions if not answered promptly please eat @Khizar 's brain
Patience beats all and a little knowledge about things too
Click to expand...
Click to collapse
FAQ'S
X-NOTE SOLE FEATURESQ. My pin lock doesnt work ?
A. Put # in front of security. mdpp=none in build prop. Reboot and set pin
Q. I have 2 clocks in status bar.....one in center and one in right side???
A. Disable one from gravitybox or xnote
Q. I cannot apply statusbar theme switch or keyboard themes etc ???
A. Copy all the content in /0/ folder to your internal sdcard it should be named as Xnote
Q.My silentmode sign doesnt goaway in statusbar??
A. Use the fix available in xnote Updates
Q. After Flashing V14 my home button is not waking up my phone ?
A. Go to X-Note App/Extras/X-Note Custom Mods and Check/Uncheck Home Button wake and restart SystemUI.
Q. After Flashing V14 my restart menu is not showing up ?
A. Go to X-Note App/Extras/X-Note Custom Mods and Check/Uncheck Restart Options Elements.
Q. How to Hide CPU Widget in StatusBar
A. Go to X-Note App/Extras/X-Note Custom Mods and Show/Hide CPU Widget in Other StatusBar Elements and restart SystemUI.
Q.How to use stock battery?
A.Not been tested myself but try.
Delete X-battery.apk and use xblast/wanam to put on the original battery. Should work on older versions
Not sure about v14.
Q. Having some wierd reflection/shadow under the date/time? SOLUTION ?
A. This is the Network Speed indicator and the problem occurs if you are using any xposed modules (Wanam) . So either switch off the indicator by going to Xnote control app >> Extras >> StatusBar Mods or disabling the xposed module.
Q. Logs in phone doesn't fully show up ( top part is missing)
A. gravity box, search for the option to hide the menu overflow it happens with navbar enabled.
Q. Google Play Movies get stuck after 9secs , whats wrong with it ?
A. Its probably because you flashed X-note Kernel go for Stock kernel or civz snapkat latest kernel .
Q. I have all green toggles in XNOTE V12 ?
A. Please go into XNOTE control app >> Extras >> Statusbar ColorMods and change the settings to your liking as shown in the image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q. How to change StatusBar transparency ?
A. Goto Xnote ControlApp>>Extras>> Color StatusBar Mods ,Check the Content
Q."How do you change the DPI of the device?"
A. First Boot DPI is set to 360dpi in X-NOTE 11 , if you want to go back to stock the value is ( 480 ).Use X-Transformer to set your DPI. Follow the instructions properly.
Q."How do you remove the power button the left, and the home button on the right on status bar?"
A. Go into X-Note Control, Extra Settings, then uncheck both show/hide home button and show/hide lock button. And Restart SystemUI.
Q."There's a white line on top of my screen, and I didn't have it on stock! I'm pretty sure it's not something wrong with my screen...HELP!"
A. Go to X-Note Control App >> X-Note Panel >> Battery Bar Settings
Q."How do I get my clock back to the center, I don't like it in the right"
A. Currently you cannot move clock you need to flash the file BatteryMod disabler posted in the next post after that you can enjoy every feature you could in X10.
Q."How do I get rid of the traffic monitor under my clock? It is starting to bug me now when I'm not downloading or browsing I just see 0kb/s."
A. Go to X-Note Control App >>Extras >> Status Bar Mods >> Show/Hide Network Speed
Q."Is there root on X-Note? I don't seem to have it"
A. X-Note is already rooted .
Q."How do I get the black and white Play Store?"
A.Here
Q."How do I install TW themes with these .apk files?"
A. Just install it, then press the menu button on your home screen, click Themes, then choose the one you like.
Q."Can I overclock on X-Note Kernel?"
A. No
Q."The bootanimation is so flashy, too flashy for my eyes to bear, I'm planning to move on to another ROM if they don't change this!!!"
A. HOLD UP! You can change the boot animation easily by going into the OTA section of X-Note, download the BIOS boot animation and flash it in recovery. OR! You can flash the zip provided by myself (fahadali2315) on the 3rd post below that would get you the default X-Note 7 Boot Animation!
FIRMWARE/RECOVERY/BOOT/KERNEL RELATED
Q."Would I need the Poland firmware to install? Or can I use my locally released KK as a base for flashing X-Note?"
A. If you have KitKat already installed, you will already have the bootloader required to flash X-Note. Hence, all you need to do is get to KitKat using any method
Q."What other kernels should I try?"
A. CivZ's SnapKat Kernel or Wootever's N3 Kernel are quite good. NOTE: You WILL trip your KNOX if you haven't already.
Q."What is the difference between stock kernel and stock kernel with init.d added?"
A. The init.d is a more advanced user option, where it allows the automatic execution of the scripts contained with /system/etc/init.d folder at each boot. Only select this if you plan to use scripts.
Q."What is this BTU CSC? What would happen if I live in XXXXX and my region is not specified?"
A. CSC means Customer Sales Code, and contains Carrier Settings and information. Installing a BTU CSC on an Australian device would not affect anything. It only gives you extra options.
Q."Why isn't my modem updated after installing the ROM? It's still at NA2!"
A. The ROM does not, and will never have, a modem install option. If you want to install/update a specific modem, you will have to flash it in Odin manually.
KITKAT 4.4 RELATED
Q. I cannot get into Tablet mode ?
A. It is because of the lovely updates from GOOGLE to blame
Q."Ongoing notifications are pushed down and temporary notifications are placed on top of the ongoing notifications! What's going on?"
A. This is a new Android 4.4 feature and is not yet changeable.
Q."On 4.3 when I swiped down on the notification bar, no matter where I swiped I would be able to pull it down. Now on the latest X-Note, when I swipe close to the right of the screen, the notification bar goes from transparent to dark...why is this?"
A.There is no workaround for this, as this is an official 4.4 feature so that it allows users to view the notification status bar with a solid background instead of intruding what is behind it. It is a visually pleasing feature over functionality.
Q."What is the Kit Kat Addons in Aroma?"
A. They are the CM11 apps that get installed usually when you install a CyanogenMod ROM, they include the AOSP Clock, 8sms and AOSP Calculator apps.
XPOSED/OTHER MODSQ. "When I press the volume buttons on the homescreen, I get a volume scrubber with a gear icon. When I click on the gear icon, it enlarges but there used to be more options to scrub for Media, System and Alarm. What happened?"
A. This is due to GravityBox. Make sure you select Media Tweaks -> Expandable Volume Panel -> Fully Expandable Volume Panel and if you want Expand Automatically.
Q."What's wrong with Xposed? Whenever I enable a module, nothing happens!"
A. Have you installed the latest version of Xposed and rebooted.
Q."The call recorder function only gives me a hissing noise when I playback, what's wrong?"
A. Not Supported in 4.4.2
Q: Why is YouTube force closing as soon as I click on it on my launcher?
A.The latest Youtube as of March 13th conflicts with the Xposed module YouTube AdAway, Disable it in Xposed and it will stop force closing on app start.The latest update in Xposed Installer (1.6) fixes the crash, so make sure you update it
Q. My Playstore shows incompatible phone when i try downloading some apps?
A. Download xposed module Playstore Fixes and set your phones original density(480) to sent to google. Then it will work
Q. I have weird looking bar on top of Contacts/Dialer.
A. Disable Menu Overflow from Gravitybox.
Thanks to @Khizar for this find.
OTHERS
Q. Screen Rotation is not working after deleting SamsungHub.apk?
A. Flash this file to fix it .Link Thanks to @Killberty for the link
Q."After flashing the ROM my Wifi and 4G/3G is not very good, what's wrong?"
A. It is not the ROM's fault, this is your Modem. Make sure you installed your region's modem on your phone. Don't go around asking where to get the 'latest' modem, as the latest is not the greatest in all cases. Use the modem you usually believe to be the best. 4.3 modems are not compatible with 4.4 ROMs.
Q.Is this ROM working properly on other variants?
A. It works well on N900W8 and N900T provided that you install the patches required for it to work. There is also an N900A version on the AT&T section.
Q."How do I dirty flash this ROM?"
A. This is generally not recommended, but if you must do it on your own JUST FLASH THE AROMA SETUP AND IT WILL WIPE YOUR SYSTEM AUTOMATICALLY .
Q."Something is wrong with my multiwindow, shown here http://www.youtube.com/watch?v=CiqktHuVa6A
A. Well, you're a strange one, If you are using Swiftkey, stop using it now. If not, flash the latest ROM and see if it fixed.
Q."My battery is draining heavily! What's going on?"
A. Download BetterBatteryStats from the second post of this thread and look for what is eating your battery and greenify that damn app :BBS LINK
Q. What should I do if my NFC/BT/Wifi isn't working?
A. Make sure you have flashed stock, kernel, modem, and everything up to date on the 4.4.2 iterations of the files. If you have anything 4.3, that is likely to cause problems. DO NOT FLASH THE N900W8 NFC/Wifi/BT FIX AS IT WILL NOT HELP. Clear your cache/dalvik cache.
KNOX
Q."I don't want to trip KNOX when installing X-Note! How should I approach this?"
A. Use this Guidebut there is no definite proof of not tripping KNOX if you know what you're doing.Be sure that you do not install any recovery from Aroma Installer, or else say goodbye to your KNOX Warranty.
IF YOU FOLLOW FLASHING ANY OTHER WAY YOU WILL DEFINATELY TRIP KNOX 0x1
TIPS- Samsung Email have big characters when writing a email in some density, recommended to install in aroma AOSP email or use Xposed
- Use Xlarge res (with xposed app settings module) for samsung Video app (com.samsung.everglades.video) at lower densities
FOR X-NOTE CANADIAN N900W8If you're on N900W8 Canadian,Follow this link to get a fully working X-Note
Link
Q: Will this new update trip my KNOX when I'm already on the 0x0 leaked Mexican Bootloader?
A: No it will not. No updates will. No kernels will. As the recovery does not write to the Bootloader, your bootloader will always be "happy".
Q. "What other kernels should I try if I'm a Canadian user?"
A. CivZ's SnapKat kernel or Wootever's N3 Kernel (Make sure you select the N900T version)
Q. What should I do if my NFC/BT/Wifi isn't working?
A. Did you flash the NFC/Wifi/BT fix? If yes, make sure you cleared cache and dalvik, as well as Fixing Permissions in CWM/TWRP so that the permissions are cleaned next boot.
Q. "How do I dirty flash this ROM?"
A. Check this http://forum.xda-developers.com/showpost.php?p=50477486&postcount=662
FOR X-NOTE TMOBILE N900T
BIG THANKS TO @djbrian52 FOR THE ORIGINAL FIND
Do these steps to get X-NOTE ROM working on your mobile ( TMOBILE ONLY ) THANKS TO @ejdavis for the latest upload.
[/COLOR]Build 15 for N900T Devices. Same steps as always, Download ROM, flash fix, and flash an N900T kernel all before first boot.
X-Note V16 Download
Wi-Fi/NFC Fix
MD5#: 0E810AE1112486753CECBAE3E0480BB3
.[/QUOTE]
Great thanks to @nicholaschum for FAQ'S and IMAGES.
Click to expand...
Click to collapse
FOR NOOBS
OP= Original Post/First Post in the thread
OTA= Over the air updates ( Xnote Updates )
SYSTEMATIC INSTRUCTIONS SPECIFICALLY FOR X-NOTE ROMS
GUIDE WRITTEN BY @nicholaschum
UNIVERSAL INSTRUCTIONS ARE LOCATED HERE
1. Did you make sure your phone model meets the criteria?
You CAN install N9005 ROMs on other variants, for example the N900T, N900W8,
provided you get a patch specific to your device, however if they have their specific
thread, N9005 ROMs DO NOT ALL SUPPORT IT.
Click to expand...
Click to collapse
2. Did you check the MD5 Checksum of the X-Note ROM after you downloaded it?
Open this spoiler for Mac Instructions!
1. Open Applications -> Utilities -> Terminal (or open Spotlight, and search for Terminal)
2. When Terminal is open, locate your directory where the file is downloaded, usually run this command: cd Downloads
3. When the path changes to the Downloads folder, type in "md5 XXXXXXXXXXXXX.zip" (name of the downloaded zip)
4. An MD5 code will come up, for example 614a3fac73272c9b53e74dc2ef5675f3, copy and paste this.
5. On the thread of the ROM, there should be located an MD5 code, press Command F, and paste it in the box. If the MD5 is found, then congratulations, MD5 checksum complete!
Click to expand...
Click to collapse
Open this spoiler for Windows Instructions!
1. Download WinMD5Free from this link: http://www.winmd5.com/ (NO INSTALL REQUIRED)
2. Unzip the application, then launch the .exe
3. Choose the file by clicking Browse, and double click the .zip file.
4. When the MD5 checksum value appears, copy and paste the MD5 from the custom ROM thread into the third box (Original file MD5 checksum value)
5. If they match, congratulations, MD5 checksum complete!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
3. Did you try wiping both Cache and Dalvik Cache?
Click this if you are using TWRP Recovery
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select the Wipe option.
3. Select the Advanced option.
4. Select Cache and Dalvik Cache, then swipe to wipe.
5. Reboot
Click to expand...
Click to collapse
Click this if you are using CWM Recovery
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select Wipe Cache
3. Click on the Volume Keys till you get to Yes, then press the power button
4. After done, select Advanced, then Select Wipe Dalvik Cache
5. Click on the Volume Keys till you get to Yes, then press the power button
6. Reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
4. Is your configuration different from the given stock values?
Did you install any undesired system files unsupported by soloilmeglio and Xentrix? If you did,
YOU LOST YOUR SUPPORT IMMEDIATELY, but there may be a bunch of people that may
have done the same.
Modifying the stock values include:
1. Modification of System Files (Installing unsupported themes from other ROMs)
2. Tweaking of System Files manually (e.g. deleting gsiff_daemon)
3. Flashing a different CSC (Customer Sales Code)
4. Flashing a different Kernel (e.g. CivZ's SnapKat, Wootever's Custom N3)
Click to expand...
Click to collapse
5. Did you install the ROM after formatting /system, /data, /sdcard, /cache, /dalvik-cache?
Click this if you are using TWRP Recovery
0. YOU WILL NEED AN EXTSD FOR THIS, TO REINSTALL THE ROM.
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select the Wipe option.
3. Select the Advanced option.
3. Select System, Internal SD, Cache and Dalvik Cache, then swipe to wipe.
5. Go back, select Format Data, type 'yes', then press Done.
6. Reinstall your ROM from your external SD.
7. Reboot
Click to expand...
Click to collapse
Click this if you are using CWM Recovery
0. YOU WILL NEED AN EXTSD FOR THIS, TO REINSTALL THE ROM.
1. Boot into recovery by holding Power, Vol Up and Home at the same time.
2. Select Wipe Data/Factory Reset
3. Click on the Volume Keys till you get to Yes, then press the power button
4. After done, select Advanced, then select Wipe Dalvik Cache
5. Click on the Volume Keys till you get to Yes, then press the power button
6. After done, select Mounts and Storage, select Format /system
7. Click on the Volume Keys till you get to Yes, then press the power button
8. After done, select Mounts and Storage, select Format /sdcard
9. Click on the Volume Keys till you get to Yes, then press the power button
10. After done, select Mounts and Storage, select Format /cache
11. Click on the Volume Keys till you get to Yes, then press the power button
12. Reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
MODS & FIXES
Xnote7 Bootanimation
For folks who don't like the new discolights bootanimation Personally i love it though
Xnote7 old Boot Animation
For Stock Samsung Boot Animation
Flash simply through recovery
(With Sound and Shutdown also)
Tested Fully Working
Stock Boot Animation
For Stock Toggles
Stock Toggles
Center Clock
Flash this zip to get center clock
Center Clock
Updating Viper for Android
soloilmeglio said:
if you want to update viper for android:
1. download new version for kk (just check for updates in application menu) don't install.
2. open older viper and uninstall drivers (in viper menu) don't reboot.
3. with titanium backup clear data+uninstall older viper4android
4. with root explorer tap on new viper apk and select VIEW (NOT INSTALL) - go inside lib/armeabi folder - longpress on ******.so file and extract it - then go to extracted and copy/paste the ******.so file in your /system/lib folder and set rw-r-r permissions and 0-0 owner
5. now back to viper4android new apk... paste in your system/app folder with same permission and owner as said above.
6. reboot recovery - wipe cache and dalvik cache
7. reboot system
8. select viper as your music effects in settings
9. open viper for android, allow super user permission when asked and install driver when asked.
10. reboot your phone.
11. done.
please don't ask further question this guide is extremely clear.
Click to expand...
Click to collapse
[GUIDE] Internal sdcard not writable? Fix..
Follow this LINK Thanks to @Khizar
Updating Bootloader or Modem
if you are already on stock kitkat 4.4 , you dont need the bootloader . If you are on 4.3 flash the bootloader provided in OTA links same goes for MODEM.
Procedure for MODEM
1.Download the file for modem ,
2. Power off your phone completely , press home +vol down + power and go into download mode when it shows two options press volume up
3.Plug your phone into PC
4.Open Odin 3.09 and select CP or for older versions select phone
5.Choose the modem.tar.md5 file you downloaded .
6.Dont touch anything else in odin
7.Start the procedure , it will restart the phone itself . Go in about device if it still shows NA2 or older baseband do the procedure again .
it tends to work the second time.
Same Procedure for BOOTLOADER
Just change CP OR PHONE TO AP OR PDA for Bootloader in odin.
Click to expand...
Click to collapse
Hello. Is it possible to Centre clock on xnote 11 ? Thanks for answers
Mroczny3 said:
Hello. Is it possible to Centre clock on xnote 11 ? Thanks for answers
Click to expand...
Click to collapse
The only possible way to center the clock is using xposed modules, but it won't work if you have OGbatteryMod enabled As it interferes with other statusbar mods .
So if you are willing to disable OGBATTERY, then you can center the clock however you want.
1. how to move clock to center together with the network meter? (tried with gravity box, not moved. didn't use wanam since it will cover the network meter) edit: so which module do you use to center the clock and make battery circle with %?
2. how to disable og battery mod? (since i read, it does interfere with other xposed module...) edit: ah...you explained it again above
3. is solo reading this thread? maybe he can give some answer...
Erase your BatteryMod by flashing the erase file .
BatteryMod Erase & Restore
Use Gravity Box or wanam Xposed to do whatever you want after that
Wanam has all the features . Battery % and statusbar mods . Check them out.
This thread is a great idea... thanks.
Q. How can I restore the stock boot animation with sound?
Wow Using Wanam after ages and this is what i make of my notification bar it took me less than 5mins.
Sent from my SM-N9005 using Tapatalk
darkcossack said:
This thread is a great idea... thanks.
Q. How can I restore the stock boot animation with sound?
Click to expand...
Click to collapse
Sorry for the delay was creating the stock boot animation from xnote other animations
Added to OP too.
Just flash througt recovery .
Stock Boot Animation
Dont forget to thank if you like this thread
download optimizer does not seem to work
akosidota said:
download optimizer does not seem to work
Click to expand...
Click to collapse
You mean the Download Booster from s5 feature ???
fahadali2315 said:
You mean the Download Booster from s5 feature ???
Click to expand...
Click to collapse
yep is it working for you?
does anyone have the boot animation from x note 7? i really liked that one and i hate the one provided in the ota. can someone please make a flashable zip with that animation in?
Hi solo.why my baseband version dont update?
I flash nb4 stock and then flashed xnote 11.but my baseband dont update to nb1.plz see this pic.
View attachment 2607656
Sent from my SM-N9005 using Tapatalk
akosidota said:
yep is it working for you?
Click to expand...
Click to collapse
Nope not for me either .
roozbeh158 said:
Hi solo.why my baseband version dont update?
I flash nb4 stock and then flashed xnote 11.but my baseband dont update to nb1.plz see this pic.
View attachment 2607656
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Link to the thread http://forum.xda-developers.com/showthread.php?t=2643109
" Note: To flash this DBT over/after XEO (or oldest), must include this PIT File. Thanks @HSD-Pilot "
You have to flash the pit file too. to completely get the new baseband
Shaun--77 said:
does anyone have the boot animation from x note 7? i really liked that one and i hate the one provided in the ota. can someone please make a flashable zip with that animation in?
Click to expand...
Click to collapse
Sorry i dont have XNOTE 7 right now if any one has the setup and they can provide me with these files .
"bootsamsung.qmg, bootsamsungloop.qmg, bootsamsungmini.qmg, bootsamsungminiloop.qmg "
They are located in system/media
I would be happy to create the old Boot animation.
fahadali2315 said:
Link to the thread http://forum.xda-developers.com/showthread.php?t=2643109
" Note: To flash this DBT over/after XEO (or oldest), must include this PIT File. Thanks @HSD-Pilot "
You have to flash the pit file too. to completely get the new baseband
Click to expand...
Click to collapse
Not really. A new Samsung "feature" is to disable any new baseband updates on 4.4.2 if you don't have "official" rom/kernel status. In order to flash a new baseband you need to use TriangleAway to get official status, boot immediately to download mode and install a modem with Odin.
Thomas
DaOldMan said:
Not really. A new Samsung "feature" is to disable any new baseband updates on 4.4.2 if you don't have "official" rom/kernel status. In order to flash a new baseband you need to use TriangleAway to get official status, boot imidietly to download mode and install a modem with Odin.
Thomas
Click to expand...
Click to collapse
Thanks for the headsup
See here its helping and getting helped
Thanks again.