Related
Hello Guru,
I need your help. I flashed my galaxy y using odin and stock rom i found over XDA. there were several file so i just pick a random one for my region. hehe don't ask me why i am just too desperate to get it fixed after boot looping :cyclops:. now my phone is fixed after the flashing it with odin. my problem is that i cannot go into recovery mode. whenever i tried to go to recovery mode i just always ending up with ODIN MODE. need your help please
resume666 said:
Hello Guru,
I need your help. I flashed my galaxy y using odin and stock rom i found over XDA. there were several file so i just pick a random one for my region. hehe don't ask me why i am just too desperate to get it fixed after boot looping :cyclops:. now my phone is fixed after the flashing it with odin. my problem is that i cannot go into recovery mode. whenever i tried to go to recovery mode i just always ending up with ODIN MODE. need your help please
Click to expand...
Click to collapse
when you get into download mode, you have pressed the wrong button combination, did you use volume up + home and power?
resume666 said:
hello guru,
i need your help. I flashed my galaxy y using odin and stock rom i found over xda. There were several file so i just pick a random one for my region. Hehe don't ask me why i am just too desperate to get it fixed after boot looping :cyclops:. Now my phone is fixed after the flashing it with odin. My problem is that i cannot go into recovery mode. Whenever i tried to go to recovery mode i just always ending up with odin mode. Need your help please
Click to expand...
Click to collapse
do this
turn of phone>remove battery>wait 30 sec>insert battery>press vol up+home+power
eureka you are in recovery mode
Hello,:crying:
on Note 3 (sm-n9005) (rooted) recovery mode is not opening. i am running stock android 4.4.2 on my device
reason: on my CWM recovery it was chinese language.so when i need to get cwm backup i cant. then i install TWRP recovery by using odin for get english language.its passed.but after that when i want to get recovery mode (vol up+home+power) when it load suddenly the screen become black and vibrate device twice and again device power on and normally start phone but its not go to recovery mode.
please please please help me to get recovery mode. or is there another way to install custom rom (zip) without using recovery mode let me know.
:good:THANK YOU:good:
sumdany said:
Hello,:crying:
on Note 3 (sm-n9005) (rooted) recovery mode is not opening. i am running stock android 4.4.2 on my device
reason: on my CWM recovery it was chinese language.so when i need to get cwm backup i cant. then i install TWRP recovery by using odin for get english language.its passed.but after that when i want to get recovery mode (vol up+home+power) when it load suddenly the screen become black and vibrate device twice and again device power on and normally start phone but its not go to recovery mode.
please please please help me to get recovery mode. or is there another way to install custom rom (zip) without using recovery mode let me know.
:good:THANK YOU:good:
Click to expand...
Click to collapse
why don't u use odin again to install recovery?
I'm not sure if your Note 3 was an original Samsung... No matter what recovery I've used, and I've had Samsung phones from all over the world, Samsung recovery has always been english...
sumdany said:
Hello,:crying:
on Note 3 (sm-n9005) (rooted) recovery mode is not opening. i am running stock android 4.4.2 on my device
reason: on my CWM recovery it was chinese language.so when i need to get cwm backup i cant. then i install TWRP recovery by using odin for get english language.its passed.but after that when i want to get recovery mode (vol up+home+power) when it load suddenly the screen become black and vibrate device twice and again device power on and normally start phone but its not go to recovery mode.
please please please help me to get recovery mode. or is there another way to install custom rom (zip) without using recovery mode let me know.
:good:THANK YOU:good:
Click to expand...
Click to collapse
Use Philz Touch Recovery
sumdany said:
Hello,:crying:
on Note 3 (sm-n9005) (rooted) recovery mode is not opening. i am running stock android 4.4.2 on my device
reason: on my CWM recovery it was chinese language.so when i need to get cwm backup i cant. then i install TWRP recovery by using odin for get english language.its passed.but after that when i want to get recovery mode (vol up+home+power) when it load suddenly the screen become black and vibrate device twice and again device power on and normally start phone but its not go to recovery mode.
please please please help me to get recovery mode. or is there another way to install custom rom (zip) without using recovery mode let me know.
:good:THANK YOU:good:
Click to expand...
Click to collapse
Flash this file using odin.
ultramag69 said:
I'm not sure if your Note 3 was an original Samsung... No matter what recovery I've used, and I've had Samsung phones from all over the world, Samsung recovery has always been english...
Click to expand...
Click to collapse
my samsung is original.and when i Purchase it from samsung care it was 4.3 and that time the recovery was english.... soooo
tonykidd93 said:
Use Philz Touch Recovery
Click to expand...
Click to collapse
bro is philz touch recovery is available for note 3 n9005? if yes then please give me odin file for this thankssss
hey_joe said:
Flash this file using odin.
Click to expand...
Click to collapse
i did this just now but not working . same problem. i was try cwm recovery on my phone by odin alsooo
sumdany said:
bro is philz touch recovery is available for note 3 n9005? if yes then please give me odin file for this thankssss
Click to expand...
Click to collapse
It's "philz_touch_6.08.7-hltexx.tar.md5"
Here's the link to the Odin file. http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
thanks everyone i m now fixed
Hello Team
I have an unidentified GT-I9500, that I need to set in recovery mode.
Using Odin 3.10 and trying all different and latest versions of either CWM, TWRP or Phillipz Custom Recovery.
Even that I am able to set the phone in download mode, Odin states all OK (Pass) and I see the green bar on the phone doing progress ok, when I try to enter recovery, it always goes into stock recovery
Need to run the Screen Passcode Removal zip (only in recovery)
Any help or sugestions ?
I have tried AT&T, Verizon, International etc versions of both CWM and TWRP and none of them work
(they all go Ok on the process, but the phone never gets into Custom Recovery
Thank you in advance
Jose
What is the model number displayed in download mode?
Thanks a lot for your reply
It states:
PRODUCT NAME: GT-I9500
CURRENT BINARY: SAMSUNSG OFFICIAL
SYSTEM STATUS: Official
And in recovery mode it states Android Recovery Mode 3e
Any help is welcomed !
Make sure you're using the original cable, and move the cable to a different port if necessary. This is an Odin issue, not phone.
Thank you !
Tried with 2 different cables, will look for a third one.
Even if a see on the phone the "blue bar" that means download in progress, and Odin says OK, PASS, it can be the cable ?
Thanks a lot for your help
BTW if you know how to remove the Screen Lock password with the Stock Recovery, that sis welcomed as well
I have issues all the time with my S4 and often it just comes down to how I am pressing the buttons to get into other the boot download mode or the custom recovery rom. I swear I press them exactly at same time ,but then I do it differently and it works.
Also found cable / USB ports can affect it too. My home PC for some reason is terrible for using Odin, but then my laptop it works fine.
josecheja said:
Hello Team
I have an unidentified GT-I9500, that I need to set in recovery mode.
Using Odin 3.10 and trying all different and latest versions of either CWM, TWRP or Phillipz Custom Recovery.
Even that I am able to set the phone in download mode, Odin states all OK (Pass) and I see the green bar on the phone doing progress ok, when I try to enter recovery, it always goes into stock recovery
Need to run the Screen Passcode Removal zip (only in recovery)
Any help or sugestions ?
I have tried AT&T, Verizon, International etc versions of both CWM and TWRP and none of them work
(they all go Ok on the process, but the phone never gets into Custom Recovery
Thank you in advance
Jose
Click to expand...
Click to collapse
The solution:
Uncheck auto-reboot in Odin before flashing the recovery.
Lennyz1988 said:
The solution:
Uncheck auto-reboot in Odin before flashing the recovery.
Click to expand...
Click to collapse
Thank you
Just did so..
How do I got out of download mode then ?
Its showing the light blue that the TWRP recovery was trasferred, and Odin (using 3.10) says OK
josecheja said:
Thank you
Just did so..
How do I got out of download mode then ?
Its showing the light blue that the TWRP recovery was trasferred, and Odin (using 3.10) says OK
Click to expand...
Click to collapse
Just hold the power on button until it reboots or remove battery.
Lennyz1988 said:
Just hold the power on button until it reboots or remove battery.
Click to expand...
Click to collapse
Lennyz1988
It worked !!!! thanks a lot Lennyz !!
Tried hundred times.....even unchecking the Autoreboot Option in Odin in past tries, but seems with the wrong Recovery version.
I am on TWRP recovery now !!!
Now let me see if I can run LockScreen_Security_bypass...the reason I needed Custom Recovery...)
This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too
hi guys i tried to flash my C9000 but now my phone is in bootloop and i can't enter recovery it says
recovery booting
recovery is not seandroid enforcing
set warranty bit recovery what to do plz help
i tried skyneel .com guide
i flashed twrp on my phone
Hi bro. İ have same problem 8 months ago and i know this fix.
First. Sorry for my bad english.
You must wait the battery fully discharge. Because you cant make anything now.
When fully discharged phone. You plug charge and press wolume down+power+home. You can go to download mode this way. You must flash the original firmware via odin.
And if you want flash twrp again this step is required.
Go Settings page in odin and untick the auto reboot.
And manually go to recovery mode by download menu after install.
ahmetk711 said:
Hi bro. İ have same problem 8 months ago and i know this fix.
First. Sorry for my bad english.
You must wait the battery fully discharge. Because you cant make anything now.
When fully discharged phone. You plug charge and press wolume down+power+home. You can go to download mode this way. You must flash the original firmware via odin.
And if you want flash twrp again this step is required.
Go Settings page in odin and untick the auto reboot.
And manually go to recovery mode by download menu after install.
Click to expand...
Click to collapse
So should i flash twrp directly or do i have to first flash the original firmware then flash twrp and also can you post original firmware download link because all the links are paid like sammobile etc
hatib237 said:
So should i flash twrp directly or do i have to first flash the original firmware then flash twrp and also can you post original firmware download link because all the links are paid like sammobile etc
Click to expand...
Click to collapse
Flash twrp directly and go to recovery after installation. Dont make any reboots before going to twrp.
ahmetk711 said:
Flash twrp directly and go to recovery after installation. Dont make any reboots before going to twrp.
Click to expand...
Click to collapse
So after flashing i should go in recovery and do what
hatib237 said:
So after flashing i should go in recovery and do what
Click to expand...
Click to collapse
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
ahmetk711 said:
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
Click to expand...
Click to collapse
Ok i and to access recovery the button is volume up + home +power right
ahmetk711 said:
Dont do anything bro. But you must go to recovery after flashed the twrp. İf you dont go to recovery it seems to bootloop one more time. Ok.
Click to expand...
Click to collapse
I was trying to access to recovery but couldn't i tried holding buttons but didn't work
hatib237 said:
hi guys i tried to flash my C9000 but now my phone is in bootloop and i can't enter recovery it says
recovery booting
recovery is not seandroid enforcing
set warranty bit recovery what to do plz help
i tried skyneel .com guide
i flashed twrp on my phone
Click to expand...
Click to collapse
its for bad recovery file
you have to wait until your battery dead.
then connect to pc and turn on the phone and hold (Power + Home + vol Dwn )
flash TWRP 3.2.1 c9ltechn (only this version)
reboot
if not worked flash nougat 7.1 rom
g900h said:
its for bad recovery file
you have to wait until your battery dead.
then connect to pc and turn on the phone and hold (Power + Home + vol Dwn )
flash TWRP 3.2.1 c9ltechn (only this version)
reboot
if not worked flash nougat 7.1 rom
Click to expand...
Click to collapse
will the 3.2.1 work on 7.1.1 c9000 HK
hatib237 said:
I was trying to access to recovery but couldn't i tried holding buttons but didn't work
Click to expand...
Click to collapse
Ok, do the 3button combination as if you are booting into download mode. As soon as screen goes black, keep power and home key pressed down but move to volume up. You have to be quick before it boots to download. This will get you to recovery.
SM-N950U Chimera Rom 2.0
hatib237 said:
will the 3.2.1 work on 7.1.1 c9000 HK
Click to expand...
Click to collapse
Yes 100% Tested.
but Im not sure its work on oreo(8)
Without root
Twrp how i flash withoit root i want my device back help me i flash all time file combination file repiar firmaware but nothing work agian show recovery booting