This thread is here as a source for you guys to find out the progress off my port.
I am porting KK from Note2 to our International S3 i9300 because Samsung have failed our beautiful device.
Do Not ask for an ETA as all you need to know will already be in this thread.
TO DO:
modify our kernel to work on new KK build. ( 99% Done )
everything else is done And i am Now Just writing a new Update script And modify ramdisk is all to do alter that.
As soon as i have flashed And checked RIL Data And wifi work Ill release in new thread in dev section. Thanks
Wow great news All the very best bro. We are waiting
Awesomeness brother seriously hats off to all your efforts if im not wrong your the same guy who tested it and has also posted videos I really appreciate your efficient contribution and also understand the risk you took up by flashing a different device firmware watched both your videos as of now ril,wifi,storage isn't working and Samsung gave lame reason as ram consumption is high but in your video it ws somewhere around 500mb good going mahn all the best fingers crossed!!! [emoji16][emoji39][emoji16][emoji39]
Sent from my GT-I9300 using Tapatalk
one question..:angel:
isn't note 2 kk too big to directly install on s3 .?
do we need partition the sd card..?
Will be interesting to see how this goes. The hardware is very similar. Do they both use the same Wolfson DAC?
arhant said:
one question..:angel:
isn't note 2 kk too big to directly install on s3 .?
do we need partition the sd card..?
Click to expand...
Click to collapse
No this will be NAND compatible i have Shrunk the rom down to 1.2GB. But all features Kept and nothing that we need has been lost.
No They was not my videos They was some one elses.
fastfix2013 said:
No this will be NAND compatible i have Shrunk the rom down to 1.2GB. But all features Kept and nothing that we need has been lost.
No They was not my videos They was some one elses.
Click to expand...
Click to collapse
So basically, we can keep shrinking the size by deleting bloatware and unwanted apps, right? Or that's the minimum size?
Kryten2k35 said:
Will be interesting to see how this goes. The hardware is very similar. Do they both use the same Wolfson DAC?
Click to expand...
Click to collapse
Yeap, they have.
Wow, such a great job dude! You've made all of the 1GB-ram-only-outdated-device users day.
I want so badly samsung to see your port, let them know XDA community "never settle".
Keep fingers crossed, let us inform about any improvements.
Cheers!
Awesome work brooo...
Hey, can you give the video from your work ??
Sent from my GT-I9300 using XDA Premium 4 mobile app
ok
can anyone upload a test biuld for our device?
i want to test?
1Q: we can't add more space for system partiton for boot rom without SD card?
tokict said:
Awesome work brooo...
Hey, can you give the video from your work ??
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://m.youtube.com/?rdm=13kbbn6x&client=mv-google
---------- Post added at 08:13 PM ---------- Previous post was at 08:04 PM ----------
So sir we wait u hope u successful in everything porting kk & boot from nand not sd card wish you successfully. .
As i stated before no need for sdcard as my kk build is NAND compatible. I do not port a rom if it can work only from sdcard. This rom is stock debloated Note 2 firmware. All features will be Kept only use Less apps will be lost but most of apps will be flashed to /data so i dont have to remove so much
fastfix2013 said:
As i stated before no need for sdcard as my kk build is NAND compatible. I do not port a rom if it can work only from sdcard. This rom is stock debloated Note 2 firmware. All features will be Kept only use Less apps will be lost but most of apps will be flashed to /data so i dont have to remove so much
Click to expand...
Click to collapse
What do you think about making max-debloated version? Less samsung apps, more happier users.
Yeppa
yeppa yeppa :good::good::good:
malachow said:
What do you think about making max-debloated version? Less samsung apps, more happier users.
Click to expand...
Click to collapse
Already done mega debloated version is just 500mb and that is the version i using to do my tests and grab logcats Once i have everything done i will upload both versions and open a new thread in dev section
Love is in the air
Can I say I love you guys?...
Yes I can
Big thanks to everyone involved in this port.
fastfix2013 said:
Already done mega debloated version is just 500mb and that is the version i using to do my tests and grab logcats Once i have everything done i will upload both versions and open a new thread in dev section
Click to expand...
Click to collapse
WOW !!!! REALLYYY???
I hope I see your new thread in dev section soon.
Sent from my GT-I9300 using XDA Premium 4 mobile app
fastfix2013 said:
Already done mega debloated version is just 500mb and that is the version i using to do my tests and grab logcats Once i have everything done i will upload both versions and open a new thread in dev section
Click to expand...
Click to collapse
I just can't still believe you cheat on samsung, haha Yeah, let them know we never forget..
So, to sum up - is there any bug you've noticed so far on your latest private test build?
malachow said:
I just can't still believe you cheat on samsung, haha Yeah, let them know we never forget..
So, to sum up - is there any bug you've noticed so far on your latest private test build?
Click to expand...
Click to collapse
1st test proved kk CAN be ported from Note2. It booted to setup and rebooted i have fixed that reboot error but Im having Major problems With baseband unknown Which is what Im trying to fix Now. I will keep u all Updated. But ye it boots
Related
As I posted in the dev thread let's bring the chit chat into the general forum and keep the dev thread on topic and clear for people to help the devs move this rom forward.
So this thread is for all the GENERAL CM9 discussion.
Everybody suck
Sent from my GT-I9300 using xda premium
Informative.
Sent from my GT-I9300 using Tapatalk 2
Despite this, people will still go to the development thread to ask questions, request features, banal talks... etc.
Maybe use this thread to summarise FAQ's found in the other thread (and subsequently this thread)
Edit the first post to stay on top of things?
In summary, no exfat on CM9, use ext4 format if you must have files over 4Gb (that's all I know so far, I don't have CM9 installed yet)
*subbed*
Get xplod to put a link to this thread in the development OP? A link to that thread from here wouldnt hurt either
is there a way to block calls in cm9? (without having to install an apk from the market)
I don't have phone yet; however, was wondering if on cm9, do you still have the same camera function as with touchwiz, like fast burst, best shot, taking pic while recording? I don't really care about losing s voice.
jblazea50 said:
I don't have phone yet; however, was wondering if on cm9, do you still have the same camera function as with touchwiz, like fast burst, best shot, taking pic while recording? I don't really care about losing s voice.
Click to expand...
Click to collapse
Bot yet i think but soon u will have them al
Just wondering if anyone knew of a video player with live previews (in thumbnails) like the original one.
By the way great rom, I moved from Galaxy S II and was surprised to find it on the S III so fast.
own4d said:
Maybe use this thread to summarise FAQ's found in the other thread (and subsequently this thread)
Edit the first post to stay on top of things?
In summary, no exfat on CM9, use ext4 format if you must have files over 4Gb (that's all I know so far, I don't have CM9 installed yet)
Click to expand...
Click to collapse
Nice idea. Once I'm back from holiday on the weekend I'll get to work bringing all the known fixes, work arounds ,tweaks and tips into this thread. Would take an age doing it on the phone.
Still flashing nightly builds whilst away
Sent from my GT-I9300 using Tapatalk 2
P1n3apqlExpr3ss said:
*subbed*
Get xplod to put a link to this thread in the development OP? A link to that thread from here wouldnt hurt either
Click to expand...
Click to collapse
Will do.
Sent from my GT-I9300 using Tapatalk 2
Hey can any one extract the crt animation ( screen of &on) frm this rom & make a flashable zip file ?? Plzz Plzz
I want 2 use in my stock rom...
Plzz
Sent from my GT-S5570 using XDA
Ph3rOn!xX said:
Hey can any one extract the crt animation ( screen of &on) frm this rom & make a flashable zip file ?? Plzz Plzz
I want 2 use in my stock rom...
Plzz
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
Next time try using Google..cuz thats what i did and it was the first link
http://forum.xda-developers.com/showthread.php?p=27549498
k786 said:
Next time try using Google..cuz thats what i did and it was the first link
http://forum.xda-developers.com/showthread.php?p=27549498
Click to expand...
Click to collapse
I don't think that's what he was looking for. And I'm not sure if you can just apply the crt animations from CM9 to stock ROM.
Has anyone managed to get MTP to work in OS X? Android file Transfer doen't detect device. Xplodwild said it works but not for me here!
sinkingfish said:
Has anyone managed to get MTP to work in OS X? Android file Transfer doen't detect device. Xplodwild said it works but not for me here!
Click to expand...
Click to collapse
If it's like on linux i guess you need to install an mtp library to get it working (i.e. mtpfs).
Tectas said:
If it's like on linux i guess you need to install an mtp library to get it working (i.e. mtpfs).
Click to expand...
Click to collapse
Android File Transfer worked fine on stock using PTP and works great with my friends Gnex. Googled mtpfs for OS X but nobody seems to have had any success.
Hope codeworkx & XpLoDWilD are able to get mass storage working.
Sent from my GT-I9300 using XDA
Would Android beam on CM9 work with S-beam? Ie someone on stock samsung rom uses s-beam to communicate with me on android bean, no issues?
Could we use NTFS on the 64Gb SD card on the GSIII using CM9?
If not.. could I somehow parition the microSD card into x2 32Gb partitions, one ext4 the other ExFAT that way I can run with this until one of the other prevails? I only like copying data once....
PLEASE DO NOT POLLUTE THE DEV THREAD​
Link to the DEV thread -->> [ROM][GT-P31XX][JB][4.2.1] CyanogenMod 10.1 official nightlies
This is the place to discuss the CyanogenMod nightlies. Feel free to talk about anything related to these ROMS.
Noob question: how can I use photosphere on CM10.1 (P3110)?
I flashed 2012-12-23 nigthly + GAPPS, but I can't find photosphere feature.
Thanks.
simplicio11 said:
Noob question: how can I use photosphere on CM10.1 (P3110)?
I flashed 2012-12-23 nigthly + GAPPS, but I can't find photosphere feature.
Thanks.
Click to expand...
Click to collapse
Have a look in the right side you See the cam Symbol if you tab this it opens a little menu straight left in it you See a ball this is photosphere
Sent from my GT-P3110 using xda app-developers app
noob question: Can i block the rotation on youtube?
Will there be an overclock kernel for this rom
Power button bug is still here on 2012-12-23. It doesnt turn on many times and I have to press it for a while till restart. Any ideas?
Sent from my GT-P3100 using xda app-developers app
icyboyice said:
Will there be an overclock kernel for this rom
Click to expand...
Click to collapse
I've heard that this ( http://forum.xda-developers.com/showthread.php?t=1823696 ) works with CM10.1. Use with caution though, I'm not sure if those posts were credible or if they worked at all.
Sent from my SCH-I405 using xda app-developers app
icyboyice said:
Will there be an overclock kernel for this rom
Click to expand...
Click to collapse
NO, but we are working on a environmentally green kernel that will allow you to run everything at half speed and get battery life of 3 months per charge. As fast as this tab is, you won;t even notice the difference..:cyclops:
good work with The Rom, tx for that!
Is there any chance to move the soft buttons to the left ?
I've got this installed on my wifes Galaxy Tab working great ready for xmas
Just one thing, ive got apps, etc installed, etc. So whats the quickest/safest method in order to keep all the apps, settings, etc
and then be able to flash the latest build of this CM10.1 ?
Thanks.
eks.konoko said:
Have a look in the right side you See the cam Symbol if you tab this it opens a little menu straight left in it you See a ball this is photosphere
Click to expand...
Click to collapse
There isn't photosphere's symbol. Only panorma mode, camera and video.
Do this 4.2 Have multiple user support???
What are new features screenshots please...
Thanx...
Geordie Boyo said:
I've got this installed on my wifes Galaxy Tab working great ready for xmas
Just one thing, ive got apps, etc installed, etc. So whats the quickest/safest method in order to keep all the apps, settings, etc
and then be able to flash the latest build of this CM10.1 ?
Thanks.
Click to expand...
Click to collapse
The best option is usually Titanium Backup
---------- Post added at 09:55 AM ---------- Previous post was at 09:49 AM ----------
Droidlover123 said:
Do this 4.2 Have multiple user support???
What are new features screenshots please...
Thanx...
Click to expand...
Click to collapse
does not support multi-user, yet. coming later
check this thread, but this won;t work in the tablet.
http://forum.xda-developers.com/showthread.php?p=35725101#post35725101
Droidlover123 said:
Do this 4.2 Have multiple user support?
Click to expand...
Click to collapse
Yes it does. :good:
daventodd123 said:
I've heard that this ( http://forum.xda-developers.com/showthread.php?t=1823696 ) works with CM10.1. Use with caution though, I'm not sure if those posts were credible or if they worked at all.
Sent from my SCH-I405 using xda app-developers app
Click to expand...
Click to collapse
No where in the thread does it say that the kernal works on cm 10.1! I've tested it and while it did boot it hangs when it upgrading android so no it doesn't work. Maybe it'll get fixed to work in the future maybe not....
daventodd123 said:
I've heard that this ( http://forum.xda-developers.com/showthread.php?t=1823696 ) works with CM10.1. Use with caution though, I'm not sure if those posts were credible or if they worked at all.
Sent from my SCH-I405 using xda app-developers app
Click to expand...
Click to collapse
People say that hangs on boot Mang, def doesn't work....
Edit: my bad didn't see the post above mine.... Also I have no photosphere either, only panorama and video and still same as some... Someone with working photosphere do me a kind one and post a link to the gapps u used ?
atrix2 running majicmod
galaxy tab 2 3113 running cm10.1 nightlys
iPhone 4 traded for some computer work... just sits there...
---------- Post added at 11:34 AM ---------- Previous post was at 11:26 AM ----------
Geordie Boyo said:
I've got this installed on my wifes Galaxy Tab working great ready for xmas
Just one thing, ive got apps, etc installed, etc. So whats the quickest/safest method in order to keep all the apps, settings, etc
and then be able to flash the latest build of this CM10.1 ?
Thanks.
Click to expand...
Click to collapse
If u use ti backup, DO NOT RESTORE YOUR DATA WHEN U RESTORE YOUR APPS.... YOU WILL BREAK APPS FROM UPDATING AT THE VERY LEAST AND WILL PROB BREAK SOME ALL TOGETHER... ASUMING U DONT BREAK YOUR INSTALL.... ONLY RESTORE JUST THE APPS NOT THE DATA WITH TI BACKUP...
there, I feel like I saved someone some hasle today , merry Christmas !!!!
Oh and PS:
Do not back up and restore system apps, that will def EFF u up
Your best bet:
Use a root exploring file manager,
Navigate to /data/app , and copy the apps you want to save and paste them to your SD card
Next repeat except from /system/app (be care full here u really prob don't need anything from here, but just check, and remember only downloaded market apps)
After upgrading use file manager to install from SD card ( navigate to where they are and click on them and let droid install them)
HINT: THE FIRST TIME U TRY TO INSTALL IT WILL WARN YOU ABOUT UNKNOWN SOURCES... PRESS THE SETTING BUTTON THAT WILL POP UP AND WHEN IT BRINGS U TO THE CORRECT SETTINGS PAGE CLICK THE CHECKBOX NEXT TO UNKNOWN SOURCES...
atrix2 running majicmod
galaxy tab 2 3113 running cm10.1 nightlys
iPhone 4 traded for some computer work... just sits there...
simplicio11 said:
There isn't photosphere's symbol. Only panorma mode, camera and video.
Click to expand...
Click to collapse
I have the same "problem" I only have the normal Panorama, but Photosphere is mising.
Using cm-10.1-20121223-NIGHTLY-p5110.zip with GAPS 4.2...
simplicio11 said:
There isn't photosphere's symbol. Only panorma mode, camera and video.
Click to expand...
Click to collapse
Look Art this thread and install the ZIP ontop gapps
http://forum.xda-developers.com/showpost.php?p=35621653&postcount=64
Sent from my GT-P3110 using xda app-developers app
Does this rom support the swapping internal memory with microsd storage mod ? My biggest problem with this tablet is its lack of internal storage
Paranormal Activity!
my Tab wakes up sometimes without any interaction from the outside world.. this happens whether I was using a lock screen or unsecured.. will try to reproduce the problem and am open to any suggestions. :fingers-crossed:
I figured I'd start a thread for this ROM.
My first question or bug report not sure which...
When turning on 2G networks only, it changes preferred networks to GSM only.
Makes sense.
Only problem is when coming out of 2g only mode, it changes the preferred network to wcdma not LTE.
There a way to change that or that just how its designed?
Thanks.
Sent from my SGH-I337 using xda app-developers app
This thread will be obsolete once i get the official Q & A thread started. It will be kinda like the one i have for the sgs3 here http://forum.xda-developers.com/showthread.php?t=1781242. I'm already working on it.
In the mean time, may I ask if sdxc 64gb cards are supported in exfat? My stock rom had no problems with it but aokp won't mount it saying, "blank or unrecognized card."
Do I need to format to fat32?
TWRP still recognizes and reads files of of the card with no issues.
Thanks task.
Sent from my SGH-I337 using xda app-developers app
lordpelvis said:
Thanks task.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Kasdarack said:
In the mean time, may I ask if sdxc 64gb cards are supported in exfat? My stock rom had no problems with it but aokp won't mount it saying, "blank or unrecognized card."
Do I need to format to fat32?
TWRP still recognizes and reads files of of the card with no issues.
Click to expand...
Click to collapse
Twrp still reads it because it's a 4.2.2 aosp problem (I'm pretty sure at least). I am curious if formatting the card would help but I doubt it b/c it didn't help on 4.2.2 on the s3. It's a minor inconvenience but personally I'm just glad to get TW off this thing. Thanks Task! I didn't think the first build would be really buggy or anything but I did expect some minor issues on the first build. Couldn't have been more wrong though, is so fast and stable it's not even funny.
Sent from my SGH-I337 using xda premium
Yah. Was just curious about it. And Task, you are my favorite person in Oregon. You have worked hard giving us a great ROM and I really appreciate it!
Is there a way to Turn ON/OFF the Wireless Tethering function from the Power Menu, Desktop Shortcut or Notification Bar Icon?, thanks
Kasdarack said:
Yah. Was just curious about it. And Task, you are my favorite person in Oregon. You have worked hard giving us a great ROM and I really appreciate it!
Click to expand...
Click to collapse
he's one of the best for sure. now task, don't get swelled and make your sig bigger. just messin. Also thanks from me.
Will I lose my backups created on twrp? If I update the recovery you are suggesting to use task? That's all I need to know sir
Sent from my SGH-I337 using xda premium
freemeech said:
Will I lose my backups created on twrp? If I update the recovery you are suggesting to use task? That's all I need to know sir
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
No you won't lose them unless you delete them yourself. But you won't be able to use them unless you flash back to the recovery that they were made from.
Thank u sir
Sent from my SGH-I337 using xda premium
If I'm reading the notes in the release thread, there is currently no bluetooth call audio on the latest task650 AOKP release, correct?
Can someone please post a video on how to do this step by step.... Would greatly help many of us.
Pretty please
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
DominicanYorkJL said:
Can someone please post a video on how to do this step by step.... Would greatly help many of us.
Pretty please
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
How to do what? You haven't even asked anything other that to post a video. A video of what?
task650 said:
How to do what? You haven't even asked anything other that to post a video. A video of what?
Click to expand...
Click to collapse
Hey TASK i think he wants a video of step by step Install instruction. it seems that people are having a hard time reading & installing the new AOKP from you.
Rotary Parts said:
Hey TASK i think he wants a video of step by step Install instruction. it seems that people are having a hard time reading & installing the new AOKP from you.
Click to expand...
Click to collapse
If he needs a step by step video of how to install the ROM then I would suggest him to not flash anything to his device until he reads up on these things more. Otherwise I see him bricking his phone in the near future.
Rotary Parts said:
Hey TASK i think he wants a video of step by step Install instruction. it seems that people are having a hard time reading & installing the new AOKP from you.
Click to expand...
Click to collapse
How is that even possible? The instructions are simple and slapped right in your face. 1, make sure you have OUDHS, 2, full wipe then flash. Couldn't possibly get any easier and if people can't figure that out then they should not be modding hardware :angel:
task650 said:
If he needs a step by step video of how to install the ROM then I would suggest him to not flash anything to his device until he reads up on these things more. Otherwise I see him bricking his phone in the near future.
Click to expand...
Click to collapse
I agree been with TASK and KT since my skyrocket not hard to read and understand. And i totally agree about some Bricks coming soon
Thermalwolf said:
How is that even possible? The instructions are simple and slapped right in your face. 1, make sure you have OUDHS, 2, full wipe then flash. Couldn't possibly get any easier and if people can't figure that out then they should not be modding hardware :angel:
Click to expand...
Click to collapse
Easy as Pie to flash task roms it already has the kernel in it. it's full proof!
Does it takes some time for the Task650 ROM to fully leverage and use the battery to its maximun potential?, with the Stock TW ROM I was getting around 0.5[%/hr] battery usage/drainage with the phone fully idle, measured by BetterBatteryStats, right now I am getting around 3.5[%/hr] battery usage/drainage with Task650 AOKP ROM, comments are welcome, thanks
NOTE: I've been measuring Deep Sleep with CPU Spy and with BOTH ROMs Deep Sleep will be around 93% to 97%
Hello XDA community!
As you know, Sammobile announced that I9300 won't get official Kitkat update from Samsung. You can get more information from there;
http://www.sammobile.com/2014/05/07/heres-a-list-of-samsung-devices-getting-the-android-4-4-kitkat-update/
But Samsung released official Kitkat update for International Note 2 (N7100) from OTA. Almost everyone believed in this update is canceled because of low RAM. I did not believe it. So, I started to work to boot N7100XXUFND3 on I9300.
The ROM is about 1.8 GB, we have 1.5 GB partition size for system. There is no way to boot on NAND without partition eMMC. I partitioned my 16GB sdcard and install the ROM to sdcard. I changed the kernel from I9300XXUGNB6. And it booted.
It's running pretty smooth even running on sdcard. Of course it crashes sometimes, but not a big deal. The most important things are not working too (like RIL, WiFi)
Here's a video of demonstration;
Here's RAM usage;
https://drive.google.com/file/d/0B3U72O5ZZ8z-YmJ6UWlMRmtGZmc/edit?usp=sharing
So, What's your opinion about canceling update?
Only commercials, if they update an with years old phone they don't sell more s4 and s5
Inviato dal mio GT-I9300 utilizzando Tapatalk
Great job brother but huge disappointment as Google stated that kk can work on devices lower than 512mb of ram easily yet Samsung cancelled it due to ram limitations not genuine reason possibly they would bring a update in the near future neglecting a flagship device is seriously awful!
Sent from my GT-I9300 using Tapatalk
Well have kitkat, believe me. If you do the same with the KitKat update for the GT-I9305 instead of the Note2 firmware it will be better. Wifi will work, and RIL most probably too after some little changes.
I will try my best to port the upcoming GT-I9305 KitKat update to the GT-I9305. If you could tell me what you have done in order to port the firmware, that would be awesome! Maybe we can team up and start porting as soon as the update is available?
BTW: Why havent you debloated the rom to shrink it a bit? Removing all unnessesary apps from /system/app and /priv-app could make it smaller than 1,5GB
XeLLaR* said:
Well have kitkat, believe me. If you do the same with the KitKat update for the GT-I9305 instead of the Note2 firmware it will be better. Wifi will work, and RIL most probably too after some little changes.
I will try my best to port the upcoming GT-I9305 KitKat update to the GT-I9305. If you could tell me what you have done in order to port the firmware, that would be awesome! Maybe we can team up and start porting as soon as the update is available?
BTW: Why havent you debloated the rom to shrink it a bit? Removing all unnessesary apps from /system/app and /priv-app could make it smaller than 1,5GB
Click to expand...
Click to collapse
-If Samsung release Kitkat for GT-I9305, I'll do my best for porting it to I9300 too.
-I don't want to remove any apk for testing RAM usage (reason of cancelling)
-I changed only kernel, and it booted.
-We can make a team for porting of course, why not?
forumber2 said:
-If Samsung release Kitkat for GT-I9305, I'll do my best for porting it to I9300 too.
-I don't want to remove any apk for testing RAM usage (reason of cancelling)
-I changed only kernel, and it booted.
-We can make a team for porting of course, why not?
Click to expand...
Click to collapse
Ahh that makes sense amd im happynto hear that you want to team up! In the past i have ported several things and i think that we can do it together! The only thinh i worry about is the RIL. Lets hope samsung releases the S3 LTE firmware soon so we can start working on it.
Also a thing with the S3 LTE is that it has a different partition layout. We must take care of that and be very carefull in what we do. Unlike the note2 we cant just flash it and see what happens.
Gesendet von meinem GT-I9300 mit Tapatalk 2
XeLLaR* said:
Ahh that makes sense amd im happynto hear that you want to team up! In the past i have ported several things and i think that we can do it together! The only thinh i worry about is the RIL. Lets hope samsung releases the S3 LTE firmware soon so we can start working on it.
Also a thing with the S3 LTE is that it has a different partition layout. We must take care of that and be very carefull in what we do. Unlike the note2 we cant just flash it and see what happens.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
Note 2 has a different partitio layout too.
as a normal user, I'm going to hope that Samsung leaks GS3 KitKat Drivers, Kernel and sth like that.. And if they do, it may help you developers.
Thanks for trying to help all of us Kitkat wanters
Sam**** will definetly not release any Kernel source without releasing a rom along with it. Thats for sure. But we can take stuff from GT-i9305 and Note2 so were good for the next time....atleast till the next major Android version.
Gesendet von meinem GT-I9300 mit Tapatalk 2
A few thoughts:
-RIL: I guess the baseband is loading modem FW from NAND even when booting from SD card. Could also be an EFS issue.
-WiFi is probably Knox interfering with module loading, as seen on the I9305.
-Storage is a consequence of booting from SD card.
-Sensors are either a HW mismatch between S3 and NoteII, or a failure to mount the Firmware partition.
Try to debloat and flash on NAND.
Sent from my GT-I9305 using XDA Free mobile app
forumber2 can you post here your rom here so somebody can debloat it or help you with it ???
Ok. So let get this straight. what you actually did is that you modified build.prop (someone posted once here how it should look) and replaced the boot. (bin, I guess) with a stock kernle from S3, right ? And you installed it on the SD card because you needed more space ? If this is right, then please upload the ROM here, and I will debloat it for you
I will still try to do this. Also, the build.prop was uploaded on XDA with the news that S3 won't receive official KK. I will remove some Google stuff and then let the flash begin
Andr3y29 said:
Ok. So let get this straight. what you actually did is that you modified build.prop (someone posted once here how it should look) and replaced the boot. (bin, I guess) with a stock kernle from S3, right ? And you installed it on the SD card because you needed more space ? If this is right, then please upload the ROM here, and I will debloat it for you
I will still try to do this. Also, the build.prop was uploaded on XDA with the news that S3 won't receive official KK. I will remove some Google stuff and then let the flash begin
Click to expand...
Click to collapse
Nope, the video is legit. Look at the lockscreen and the settings app. Baseband version is also unknown, which is a sign that this is a legit port.
P.S: What are you gonna do with this rom? Its useless...WiFi and RIL doesnt work...
XeLLaR* said:
Nope, the video is legit. Look at the lockscreen and the settings app. Baseband version is also unknown, which is a sign that this is a legit port.
P.S: What are you gonna do with this rom? Its useless...WiFi and RIL doesnt work...
Click to expand...
Click to collapse
I didn't said it is not legit. in fact, I wanted to know what to do to use it myself And I would probably end just by testing it for few hours, probably testing some random modems / (restoring EFS :-? ). And @henrylife , who is porting the S5 ROM said that every 4.3 kernel works on that, so... probably ending dual-booting it. Found on Note II's thread even ROMs with like 600-700MB.
.NetRolller 3D said:
A few thoughts:
-RIL: I guess the baseband is loading modem FW from NAND even when booting from SD card. Could also be an EFS issue.
-WiFi is probably Knox interfering with module loading, as seen on the I9305.
-Storage is a consequence of booting from SD card.
-Sensors are either a HW mismatch between S3 and NoteII, or a failure to mount the Firmware partition.
Try to debloat and flash on NAND.
Sent from my GT-I9305 using XDA Free mobile app
Click to expand...
Click to collapse
-RIL: I think I just need to change RIL blobs tp get it work. It's easy
-WiFi: Maybe KNOX, maybe WiFi modules (dhd.ko) causes the problem. We should try
-Storage: The storage problem isn't causing by booting from sdcard, I tried boot from sdcard with CM11 and I9300XXUGNB6. Those had not any problems about storage. I think I need to change mount commands in ramdisk.
-Sensors: Android Sensor Service is updated in Kitkat. So, we need newer sensor driver of I9300. Maybe we can use CM11 opensource driver.
Andr3y29 said:
Ok. So let get this straight. what you actually did is that you modified build.prop (someone posted once here how it should look) and replaced the boot. (bin, I guess) with a stock kernle from S3, right ? And you installed it on the SD card because you needed more space ? If this is right, then please upload the ROM here, and I will debloat it for you
I will still try to do this. Also, the build.prop was uploaded on XDA with the news that S3 won't receive official KK. I will remove some Google stuff and then let the flash begin
Click to expand...
Click to collapse
I didn't change anything in /system partition. I changed only boot.img. I can't upload it, but if you want to play with this, you can download the ROM from sammobile or samsung-updates.
______________________________________________
I'm not gonna contiune to port Note 2 firmware. If Samsung will release Kitkat for I9300, I'll do my best
forumber2 said:
-RIL: I think I just need to change RIL blobs tp get it work. It's easy
-WiFi: Maybe KNOX, maybe WiFi modules (dhd.ko) causes the problem. We should try
-Storage: The storage problem isn't causing by booting from sdcard, I tried boot from sdcard with CM11 and I9300XXUGNB6. Those had not any problems about storage. I think I need to change mount commands in ramdisk.
-Sensors: Android Sensor Service is updated in Kitkat. So, we need newer sensor driver of I9300. Maybe we can use CM11 opensource driver.
I didn't change anything in /system partition. I changed only boot.img. I can't upload it, but if you want to play with this, you can download the ROM from sammobile or samsung-updates.
______________________________________________
I'm not gonna contiune to port Note 2 firmware. If Samsung will release Kitkat for I9300, I'll do my best
Click to expand...
Click to collapse
The Sensor driver should be easy, we can take blobs from the GT-i9305 Update. BTW: Im going to create a developer port thread this evening..lets see what we can do.
To get storage to Mount 100% you will need to modify the vold. Fstab file. Once done your storage should work correctly. If you need help With RIL let me know via PM. Also i Can help you get these bugs ALL ironed out TODAY. Just PM me thanks.
---------- Post added at 03:22 PM ---------- Previous post was at 03:20 PM ----------
XeLLaR* said:
The Sensor driver should be easy, we can take blobs from the GT-i9305 Update. BTW: Im going to create a developer port thread this evening..lets see what we can do.
Click to expand...
Click to collapse
Dont need sensor driver from i9305 kk build i Can modify our curent driver to work on kk build. Its Not Easy But With a few hours And a few logcats Ill get It Done.
---------- Post added at 03:37 PM ---------- Previous post was at 03:22 PM ----------
Also OP this is 100% usable With NAND. Just move some Google apps to /data when flashing And It will Fit perfectly atleast that Way your still able to test ram usage
I am porting note2 kk firmware. I have Also removed Knox from the firmware as It only cause problems for me. Once Im happy Ill release It so you can all test. Please bare With It Im working off my Phone unlimited connection so upload And download are Very slow. Thanks.
This new kk build will be 100% NAND compatible. Thanks.
fastfix2013 said:
I am porting note2 kk firmware. I have Also removed Knox from the firmware as It only cause problems for me. Once Im happy Ill release It so you can all test. Please bare With It Im working off my Phone unlimited connection so upload And download are Very slow. Thanks.
This new kk build will be 100% NAND compatible. Thanks.
Click to expand...
Click to collapse
Sounds nice, PM me if you need help or a tester
Gesendet von meinem GT-I9300 mit Tapatalk 2
XeLLaR* said:
Sounds nice, PM me if you need help or a tester
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
Just Making needed changes to our kernel so its able to boot kk. Once thats done i will boot It n upload Screenshots n video. Once i am happy everything needed is working Ill release to you in PM to test.
I Think if your Good enough to port a rom And show us all It on xda. Then u should release It Not Just Say Im Not going to continue It. If i port a rom ILL RELEASE its that simple Ill keep you all Updated throughout my work. Thanks
Q&A for [ROM][G900V][NI2]EXTREME SYNDICATE v2.1! READY NOW!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hi all. Is 2.1 using Android 4.4.4? Why isn't it using NE9? (Diff between that and NI2?) Are there any known bugs to this release? If so, could we expect a 2.5 release semi-soon? I'm scared to flash due to other people's troubles so far but have been eagerly waiting an update! This has been a near-perfect ROM for me who likes minimal and stripped down. Making it even more stripped down starts to make me worry though. Haven't any experience with mods other than viper4android. Is that HX camera mod better than the included camera in ExtremeSyndicate 1.5?
Sorry for newb post.
there isnt much dif in ni2.. just a newer version.. it is more debloated but you dont really need to mod anything.. just simply install/push what you want to the phone
Sent from my SM-G900V using XDA Free mobile app
elliwigy said:
there isnt much dif in ni2.. just a newer version.. it is more debloated but you dont really need to mod anything.. just simply install/push what you want to the phone
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
I got the message from other post, so I need to flash a keyboard apk (Android L keyboard is fine) after I install the ROM?
BSAVAG3 said:
I got the message from other post, so I need to flash a keyboard apk (Android L keyboard is fine) after I install the ROM?
Click to expand...
Click to collapse
That is correct. Find a Android keyboard apk and place it in internal storage or on sdcard. After you have flashed the ROM use the "My Files" app included in the ROM to install the keyboard apk. That is how I understand the process. I'm not sure, but trying to install the "L" keyboard might not be a simple as installing an apk. I think, but not sure, there are some supporting files that you need for the "L" keyboard to properly function. A simple, no frills keyboard may be a better option until you're up and running and then try installing the "L" keyboard or other keyboard from the play store.
jpcalhoun said:
That is correct. Find a Android keyboard apk and place it in internal storage or on sdcard. After you have flashed the ROM use the "My Files" app included in the ROM to install the keyboard apk. That is how I understand the process. I'm not sure, but trying to install the "L" keyboard might not be a simple as installing an apk. I think, but not sure, there are some supporting files that you need for the "L" keyboard to properly function. A simple, no frills keyboard may be a better option until you're up and running and then try installing the "L" keyboard or other keyboard from the play store.
Click to expand...
Click to collapse
yea I got it installed, yet as someone said earlier. I installed google calendar and it does not sync for some reason. Hopefully can find out why. Also any chance of the black theme coming back?
BSAVAG3 said:
yea I got it installed, yet as someone said earlier. I installed google calendar and it does not sync for some reason. Hopefully can find out why. Also any chance of the black theme coming back?
Click to expand...
Click to collapse
Good to hear. I'm not sure about the dark theme, we'll have to ask elliwigy. As far as Google Calendar not syncing, elliwigy removed more "stuff" for this build, he may have eliminated a file needed for sync.
jpcalhoun said:
Good to hear. I'm not sure about the dark theme, we'll have to ask elliwigy. As far as Google Calendar not syncing, elliwigy removed more "stuff" for this build, he may have eliminated a file needed for sync.
Click to expand...
Click to collapse
i have a keyboard apk android L that installs just fine as a regular apk.. i will post hopefully tomorrow when i get home.. wifi hopefully gets fixed tomorrow..
as for the theme, its possible.. i will hafta use the themeable apks from the theme section but i might b able to get er done.. no eta tho
as far as the sync i am not sure lol. i did remove the splanner stuff and all samsung stuff but google stuff should b there.. best bet is to compare it to a stock rom n see what apks were removed
Sent from my SM-G900V using XDA Free mobile app
Camera?
How would I get the factory camera work?
I refuse to flash without the black & white theme!!! So good!!! Can't live with Samsung theme. Thanks for all your hard work on this ROM though Elliwigy!! I'll stick with 1.5 until this is updated!
ccic2491 said:
How would I get the factory camera work?
Click to expand...
Click to collapse
Flash this in recovery:
https://docs.google.com/file/d/0By9dxKZHr9vaRlRXNmozWU1FcTQ/edit?usp=docslist_api
Sent from my SM-G900V using XDA Free mobile app
So does the closing of the original thread mean that their will not be anymore updates?
BSAVAG3 said:
So does the closing of the original thread mean that their will not be anymore updates?
Click to expand...
Click to collapse
for extreme syndicate i think not.. if i make a new rom (wink) i will create a new thread.. i just got tired if debloating n being asked every day to add stuff back in and being trolled cuz it was "too light"
Sent from my SM-G900V using XDA Free mobile app
its a lonnng shot but Im going to dive into a aosp looking rom
Sent from my SM-G900V using XDA Free mobile app
elliwigy said:
for extreme syndicate i think not.. if i make a new rom (wink) i will create a new thread.. i just got tired if debloating n being asked every day to add stuff back in and being trolled cuz it was "too light"
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Gotta stick to your guns man! Ignore the special requests that fall out of your scope of support and if they don't like it, then oh well. Good to see you're still around :good:
BigBot96 said:
Gotta stick to your guns man! Ignore the special requests that fall out of your scope of support and if they don't like it, then oh well. Good to see you're still around :good:
Click to expand...
Click to collapse
+1 on what BigBot96 said. Your ROM is exactly what I had been wanting for years. A lean, fast, great battery ROM that provided all the basic functions of a smartphone without all the BS bells and whistles. No matter what you do, there will always be someone who wants something different than what YOU want. Let potential users of your ROM know up front what you offer and if that doesn't "float their boat" they can either not flash your ROM or they can add what they want. Let them know up front that you don't offer or support a "buffet line of options". They can like it or, well, leave it and go flash something else.
I miss this rom! For all my devices, with all the roms I tried, this was my favorite. If I could build a rom (which I can't), I would have built something almost identical to this one. You stated you stopped developing because you were busy, tired of trying to debloat more and tired of getting flamed. I accept your stopping as version 1 was to me perfection, and I agree, it would have been so hard to improve upon it.
I tried a couple of other roms. While good, they were not nearly as perfect as this one. I think I'll go back to version 1 to see if I can figure out what is missing from version 2. Then it's back to glory for me. Thanks for all your hard work. I've been busy traveling that I didn't take the time to tell you thanks man. Happy holidays. If you build another rom, can you post a notice here. All the best.
version 2.1 was updated to ni2 but before i could theme n work out some kinks i shut it down.. i was working on the opposite but ran into some issues with 5.0 apks not working.. I will be posting a new rom as soon as we get 5.0! i already have a working list of what to debloat (based on disecting the g900f build) so you will see me again! In the meantime, I have been learning to code since ultimately I want to create apks for various things
elliwigy said:
i just got tired if debloating n being asked every day to add stuff back in and being trolled cuz it was "too light"
Click to expand...
Click to collapse
I never did understand why people expected stuff to be added back into a ROM when it's main purpose was to be "lighter" with each update makes no sense to me lol. Anyway, I'm running V1 and it's simply awesome! I just rooted and installed V1 on my wife's phone today (she actually ASKED me to root it lmao, I about fell over) but I would really like to have the flashlight toggle that appears to be included in V1.5. Is there an easy way to get the flashlight toggle? Is there a link somewhere for V1.5 (I haven't found one yet)? Can I dirty flash it over V1?
---------- Post added at 06:16 PM ---------- Previous post was at 06:06 PM ----------
o-o said:
I never did understand why people expected stuff to be added back into a ROM when it's main purpose was to be "lighter" with each update makes no sense to me lol. Anyway, I'm running V1 and it's simply awesome! I just rooted and installed V1 on my wife's phone today (she actually ASKED me to root it lmao, I about fell over) but I would really like to have the flashlight toggle that appears to be included in V1.5. Is there an easy way to get the flashlight toggle? Is there a link somewhere for V1.5 (I haven't found one yet)? Can I dirty flash it over V1?
Click to expand...
Click to collapse
Nevermind, I found the older builds in your ROM thread. Thanks for all you do! I'd rather use an iPh0ne than a stock Veriz0n S5. Not really, but close lol.
I will be updating rom to L hopefully by end of tonight!
Sent from my SM-G900V using XDA Free mobile app