I have a strange situation here. My GPS will only read aloud when I am NOT connected to Bluetooth in my car. If I am connected to bluetooth while on the phone but not actually using the Bluetooth, using the handset to talk on the phone, the GPS voice comes through the earpiece on the phone. The GPS voice works fine when I'm not connected to Bluetooth in my car. Does anybody else have this problem? Any solutions? Thanks in advance!
Sent from my SM-G900V using Tapatalk
Ditto!
I too had that problem. I recently was traveling for work and needed GPS in the rental car. I almost missed my exit because the nav voice wasn't working over the car's bluetooth connection. Calls worked fine but not the nav voice....
madhacker7 said:
I too had that problem. I recently was traveling for work and needed GPS in the rental car. I almost missed my exit because the nav voice wasn't working over the car's bluetooth connection. Calls worked fine but not the nav voice....
Click to expand...
Click to collapse
ok good to know that I am not loosing my mind
I have no idea what is causing it tho.
Under Bluetooth settings can you see if you are connected as phone and media or just phone? Every once in a while mine just connects as phone for some strange reason!
kilroy1stcav said:
Under Bluetooth settings can you see if you are connected as phone and media or just phone? Every once in a while mine just connects as phone for some strange reason!
Click to expand...
Click to collapse
You know what....It didn't occur to me to check that. Good call!
Sent from my SM-G900V using XDA Premium 4 mobile app
kilroy1stcav said:
Under Bluetooth settings can you see if you are connected as phone and media or just phone? Every once in a while mine just connects as phone for some strange reason!
Click to expand...
Click to collapse
I will check this too! Was planning on checking it today but we took my husband's car all day, his doesn't have Bluetooth. But I will check that in the morning when I go to work! Thanks!
Sent from my SM-G900V using Tapatalk
kilroy1stcav said:
Under Bluetooth settings can you see if you are connected as phone and media or just phone? Every once in a while mine just connects as phone for some strange reason!
Click to expand...
Click to collapse
Both media and phone was checked off.....hmmmm....not sure why it doesn't work when connected to Bluetooth.
Sent from my SM-G900V using Tapatalk
Ok, today I tried my phone with two different Bluetooth devices to make sure I got music and GPS out at the same time and I did so i know the S5 is capable of it. So check to make sure your devices are actually are connected as phone and media when paired next time just to make sure.I know my Motorola roadster2 sometimes only connects as phone even though it is set up as both, I usually have to reboot both the phone and and my roadster to get it to connect as both fir what ever reason. I hope that helps, if not I am at a loss!
I tested this the other day, and it works fine for me. I am using a Kenwood DNX8120 head unit, and it is connected with the S5 with both the headset and media bluetooth profiles. Note that the head unit needs to be on the bluetooth input for me to hear it since it is using the media profile for the GPS voice. If it is on another input (i.e. tuner, CD), you won't hear the phone's GPS.
Still nothing. I cleared my cars system memory and repaired the phone. The weird thing is that it was working when I got the phone a few weeks ago. It worked for a week, then all of a sudden stopped.
A tad bit late, but here nonetheless
putney1477 said:
Still nothing. I cleared my cars system memory and repaired the phone. The weird thing is that it was working when I got the phone a few weeks ago. It worked for a week, then all of a sudden stopped.
Click to expand...
Click to collapse
I know this is an old thread, but I wonder if you were listening to bluetooth audio or not. If you weren't listening to bluetooth audio on your car radio, then you wouldn't hear the voice navigation prompts. Unfortunately I don't believe voice navigation works like the phone.
The phone will mute any audio currently playing and automatically switch to the phone.
The nav audio works through bluetooth audio only. It doesn't mute anything so unless you are listening to bluetooth audio you won't hear the prompts (they are there, but you aren't listening to the source where they come through).
I think the solution as stated was to turn off Bluetooth media profile so it only comes out of your phone and leave on bluetooth call audio profile so it comes through the car.
bl^5 said:
I know this is an old thread, but I wonder if you were listening to bluetooth audio or not. If you weren't listening to bluetooth audio on your car radio, then you wouldn't hear the voice navigation prompts. Unfortunately I don't believe voice navigation works like the phone.
The phone will mute any audio currently playing and automatically switch to the phone.
The nav audio works through bluetooth audio only. It doesn't mute anything so unless you are listening to bluetooth audio you won't hear the prompts (they are there, but you aren't listening to the source where they come through).
I think the solution as stated was to turn off Bluetooth media profile so it only comes out of your phone and leave on bluetooth call audio profile so it comes through the car.
Click to expand...
Click to collapse
Thank you! I will give thus a try!!!
Try a program in the play store called BTMONO. This worked for me.
Sent from my SM-G900V using XDA Free mobile app
Related
I wanted to know how u stream music to ur bt headset or even the car from my epic.
Is out possible with the plantronic voyager pro our is there another better choice out there?
Thanks.
Sent from my SPH-D700 using Tapatalk
If the device is a2dp capable than once you connect it to the phone it will automatically play through the bluetooth device. Pair the device and chech the device options. If the Media box is checked than you know you are good.
crawrj said:
If the device is a2dp capable than once you connect it to the phone it will automatically play through the bluetooth device. Pair the device and chech the device options. If the Media box is checked than you know you are good.
Click to expand...
Click to collapse
^ This
I use mine every day in my car linked /w bluetooth and everything goes through it perfectly. Even if I use it for Nav it turns down the music and voices the nav over it. It works extremely well.
Hi everyone,
I picked up my GSIII yesterday (SGH-I747, Bell version from Canada). The phone is a champ, but so far I found fairly serious problem. My car has bluetooth phone functions built in. I paired the phone with it, and it pairs just fine. I can receive and make calls from the car just fine as well, but there is no incoming or outgoing audio. When connected to my car's bluetooth, there is no audio going through my car's speakers or through the phone. It is only when I grab the phone and unclick the "bluetooth headset" button that I can talk on the phone. If I turn "bluetooth headset" back on, there is no sound again. My car worked with my old Blackberry 8330, so the car is fine. It's a 2009 Mercedes-Benz B200, fully loaded, Canadian spec. It has the AUDIO 20 system built in.
My phone specs are as follows:
-stock ROM, not rooted or anything (do we have root yet?)
-Baseband: I747MVLLE8
-Build: IMM76D-I747MVLLE8
The GSII seemed to have the same problem when it came out and it was fixed with a firmware update (http://samsunggalaxysforums.com/showthread.php/5212-Speaker-and-mic-problem-when-calling-someone.)
Anyone have any ideas? Thanks!
Did u by any chance turned down the volume on the phone?
Sent from my SPH-L710 using xda app-developers app
Bluetooth worked fine in my car. Made a call. And they could hear me and I heard them. This with a Kenwood hdx6980
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Yeah Bluetooth works on my CD player also
Sent from my SPH-L710 using xda app-developers app
after pairing did you go into the bluetooth setting for the paired device (car) and check the "call audio" box?
martyzidek said:
Did u by any chance turned down the volume on the phone?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Nope, I checked the volume and everything is turned up the way it's supposed to be.
faulkton said:
after pairing did you go into the bluetooth setting for the paired device (car) and check the "call audio" box?
Click to expand...
Click to collapse
Yep. It's checked. Moreover, if I uncheck it, the car doesn't connect to the phone.
I'll check my calling this morning, but yesterday I had streaming audio via bluetooth (audible playing a book). The only thing I noticed was that, unlike my old myTouch 4g running CM7, the book didn't stop playing when I turned the car off. That's something I'll have to work out.
EDIT - it's only audible that gives me a problem - looks like a specific app issue.
I'll l have to check if my calls work. All my music and podcast work good. They stop when the car turns off and starts up again when I start the car the next day.
Edit: Just tried it out and incoming and outgoing call sounds work great. No issues here.
Sent from my SPH-L710 using xda app-developers app
I have absolutely no issues with incoming and outgoing calls through Bluetooth in my car. Also, I have no issues playing music through Bluetooth. Possibly try a factory reset on your phone and try again...
It sounds like all your cars support A2DP for playing music. Mine doesn't, it just acts as an old-school bluetooth headset. Can that make a difference?
Mine plays perfectly using Googles Play Music streaming service, also calls work fine, too. This is on my Dodge's U-Connect.
Update: I tried with an old jawbone headset to see if it's a general Bluetooth problem or just specific to my car. The jawbone works like a charm, so it's not a problem with Bluetooth versions or anything like that. But I did notice something interesting: in the Bluetooth options in the gs3 the jawbone comes up with a picture of a phone handset beside it whereas the car has a picture of headphones. I think that's the problem: the phone recognized the wrong Bluetooth profile. I can't seem to delete th car off the list of Bluetooth devices. This is rreally irritating. Any suggestions (short of a total reset)? Thanks!
You might see if there's an update for your car's Bluetooth... if so that might fix your issue.
Sent from my SGH-T999 using Tapatalk 2
No go so far. I'll have to try a reset, otherwise wait for an update or some custom ROMs.
Update: I still haven't done the reset, but I went to the Mercedes dealer today. They told me (after almost a day of investigating) that Germany said that the GSIII is forever incompatible with the B200. I think that's pretty dumb because the problem is clearly software, but the dealer seems to be washing its hands of this matter.
Hi folks, I've been having this very frustrating problem with A2DP that I can't seem to find anywhere else on the forums.
My bluetooth headset (Nokia BH-905i) connects to my nexus 4 just fine, and I've been using it to listen to music since I get my nexus in january. But recently, every time I connect my headset, and I go to play any music or other sounds that play through the media channel, it comes out the speaker on the phone. In addition, when I use the volume slider I get the "speaker" icon instead of the "bluetooth" icon that I used to get.
My bluetooth headset has worked fine since the OTA update, it's just very recently (last week or two) that this issue has been happening.
The first time it happened, a simple reboot would fix it, now I can reboot and re-pair the headset all I want, it just won't work.
Has anyone else had this issue?
PS. I will also add that the next/previous track buttons still work, but the play/pause button DOES NOT! Very strange!!!
Am I seriously the only one with this problem?
PickleHead said:
Am I seriously the only one with this problem?
Click to expand...
Click to collapse
What music player app are you using? That could be the problem right there. I sometimes have this problem with my JVC Arsenal head unit, but usually disabling and re-enabling bluetooth does the trick. Don't have to unpair or reboot, just toggle BT on and off.
Anyone know how to get the track info to transmit? It used to work with Apollo and Pandora, but it won't work with Spotify or anything else. In fact, it doesn't work at all on the N4
I use DSub, but I've tried google music, and also any other "media" sounds don't go through the headset as well ie: Youtube, games, etc.
PickleHead said:
I use DSub, but I've tried google music, and also any other "media" sounds don't go through the headset as well ie: Youtube, games, etc.
Click to expand...
Click to collapse
have you checked the device profiles in the bluetooth menu? there is an option for phone audio, and an option for media audio, check them both
Yes I'm sure, I've also toggled them multiple times to try and get it working...
I also have this same problem. I'm using CM 10.1 nightlies
For some reason I able to pair my phone but not the audio.
In the Bluetooth settings though I only have the option for phone audio and not media audio. After checking on a couple of forums, it shows that my radio does support Bluetooth streaming through a2dp, but for some reason I cannot get it to work on my phone...
Edit:
It seems as though A2DP is broken in CM 10.1 as in stock android roms. I'm not 100% about this, but thats what it looks like.
Hi,
I do use AD2P audio a lot, and never had this issue (Sony MW1).
I m using exclusively AOSP or AOKP based roms (never use stock CM 10.1 because of how silly big is the navbar), but I can give it a shot during my next flashing session for testing
I don't have any problem pairing the audio. The checkbox goes and the headset actually beeps. It's connected, android just isn't sending the audio to the headset.
Me too
PickleHead said:
I don't have any problem pairing the audio. The checkbox goes and the headset actually beeps. It's connected, android just isn't sending the audio to the headset.
Click to expand...
Click to collapse
I've got the same issue.
I have tried with both jawbone and jabra headsets, no joy.
If I toggle bt on/off/on, connect the headset and then try playing music immediately I get ~1 second of audio over bluetooth before it goes silent.
I'm currently on PA 3.15 with moles kernel, but am going to try some other kernel/rom combos.
if anyone knows which logs i should be looking at i'm happy to upload them
Not quite the same problem, my music plays out of the phone speaker. Also I'm running stock rom.
PickleHead said:
Not quite the same problem, my music plays out of the phone speaker. Also I'm running stock rom.
Click to expand...
Click to collapse
If i wait more than 1 or 2 seconds after connecting my headset it comes out of the speaker also, as the bt media connection dies. I only get the little bit of audio if i hit play right after I connect the headset
I managed to find a very strange work around...
I installed this app: https://play.google.com/store/apps/...sImNvbS5tYXhpc3Rhci5tb25vYmx1ZXRvb3RoZnJlZSJd
I turned on the app, and I could listen to music over mono mode (which sounds AWFUL). I then turned the app off, and when I changed the volume with the volume buttons I noticed the volume bar was displaying the bluetooth icon instead of the speaker icon.
My app was playing music, I didn't hear anything, but my headset was still outputting the characteristic 'hiss' of being in mono mode. So I went into the bluetooth settings and turned off mono mode, and now it is playing music through A2DP finally... We'll see if this problem occurs again and I'll see if the same process fixes it again. I'm just glad it's finally working again without resetting my phone.
I just wanted to update my post for anyone else who might have this problem in the future. I've performed this fix once before my last post and I haven't had to do it again, I've also uninstalled that app and everything is still working great.
It worked for me too!
Thanks to PickleHead and his workaround I'm listening again.
Thanks!!!
Media audio VS. Call Audio
Hi,
I have Samsung galaxy S3 with android 4.1.2 connected to my fordAudio BT device.
I am playing music using the original media player that came with the Android.
The BT connects quickly, but I can't hear the media I'm playing.
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Does this helps to understand the issue?
Hi,
I have Samsung galaxy S3 with android 4.1.2 connected to my fordAudio BT device.
I am playing music using the original media player that came with the Android.
The BT connects quickly, but I can't hear the media I'm playing.
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Does this helps to understand the issue?
Click to expand...
Click to collapse
I think that is a different issue.
Thanks to PickleHead and his workaround I'm listening again.
Thanks!!!
Click to expand...
Click to collapse
I'm glad I could help mrjole. This was a very frustrating issue, I could not listen to my music for about a month!
Bluetoot Media Audio failing
PickleHead said:
I just wanted to update my post for anyone else who might have this problem in the future. I've performed this fix once before my last post and I haven't had to do it again, I've also uninstalled that app and everything is still working great.
Click to expand...
Click to collapse
I'm having exactly the problem described here, but this solution doesn't work for me. I have a Galaxy S4 and the bluetooth media audio sometimes works when I boot the phone up, but later it doesn't work. I tried this MonoBluetooth app and it doesn't seem to help. When I tell it to turn on the the mono signal, it says the media is disconnected even though the bluetooth module says it is connected to the AD2P device with media audio. On cases where it does connect, it seems to work, but in that case the bluetooth works with out this app fine.
I'm running 4.2.2 and see this on both the MDK and ME7 code base. I'm looking for a good soluton. I tried the Bluetooth Fix Repair on Google Play, but it can't seem to find my bluetooth configuration folders.
selicoh said:
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Click to expand...
Click to collapse
I have had exactly this problem for a couple of days with my S4 connected to my Jabra Freeway car speaker. Also in my case, disabling call audio makes the music pass through, but then I can't use the phone via the speaker which is sort of the whole purpose of the thing!
But I just found a simple workaround: I simply called my phone from another phone to check that phone audio passed through with both options enabled. It did. But it also cured the problem: After the call, media audio worked again - with both options checked.
marlar said:
I have had exactly this problem for a couple of days with my S4 connected to my Jabra Freeway car speaker. Also in my case, disabling call audio makes the music pass through, but then I can't use the phone via the speaker which is sort of the whole purpose of the thing!
But I just found a simple workaround: I simply called my phone from another phone to check that phone audio passed through with both options enabled. It did. But it also cured the problem: After the call, media audio worked again - with both options checked.
Click to expand...
Click to collapse
I'd be interested to know if this fixes the problem for any length of time. Occasionally, and usually after a reboot, I can use the media audio, but then it fails when I try it again. Fiddling with the connections and apps sometimes makes it come back on, but usually only for a short while. While it is connected, it seems to stay connected.
Last night, I tried pairing up my GS4 in my car (which has bluetooth) and although I sync'd it and verified the settings on the GS4, for some reason no audio will play (both calls & music).
Is anyone else having this problem? I've paired my car to a couple bluetooth devices and this is the first time it's not working.
I havent made any calls yet, but Pandora was working fine for me yesterday.
Works fine in my 2013 sonata
ATT Galaxy S4, stock, rooted
No issues in my Wrangler JKU.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
davidusr said:
No issues in my Wrangler JKU.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
What kind of car do you have...it took quite a bit of fiddling to get bluetooth to work well with my impreza
Works fine with my AVIC-z130bt
wdouglass said:
What kind of car do you have...it took quite a bit of fiddling to get bluetooth to work well with my impreza
Click to expand...
Click to collapse
Jeep Wrangler JK Unlimited.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
There are indeed some issues with Bluetooth and I'm not sure who's to blame, or maybe both parties.
I have a 2013 Subaru wrx and it will pair fine, but sometimes it only pairs "Media" and sometimes it pairs media and phone calling functions.
Also, it will NOT pair automatically. I have to go in to the Bluetooth settings on the device and manually click on the Subaru car media, wait 5-10 seconds, then it pairs.
My galaxy nexus always worked like a charm, shame.
I have used Pandora and also made/received calls over Bluetooth without any issues. Always connects automatically a few seconds after my car starts. 2012 Honda Civic
I have had bluetooth issues as well with my pioneer 6100bt headunit. It would only auto connect to phone audio, it was driving me crazy. As a temporary solution i downloaded a free app called Bluetooth Auto Connect. It's free and you need to mark the checkbox setting: Auto Connect every time the screen goes on. Hope this helps you out
Krispydancing said:
I have had bluetooth issues as well with my pioneer 6100bt headunit. It would only auto connect to phone audio, it was driving me crazy. As a temporary solution i downloaded a free app called Bluetooth Auto Connect. It's free and you need to mark the checkbox setting: Auto Connect every time the screen goes on. Hope this helps you out
Click to expand...
Click to collapse
I am having the same issue. My phone portion will autoconnect and I have to go back in and check the media box everytime. I have unpaired and paired it back again and the same issue. Every single time I connect I have to recheck that box.
Edit: Sony DSXS310BTX is the deck I have. Worked 100% fine with my GS3.
ldejavul said:
I am having the same issue. My phone portion will autoconnect and I have to go back in and check the media box everytime. I have unpaired and paired it back again and the same issue. Every single time I connect I have to recheck that box.
Edit: Sony DSXS310BTX is the deck I have. Worked 100% fine with my GS3.
Click to expand...
Click to collapse
I have the same issue; phone works great, media not so much. it's not a huge deal, because i use the phone part more anyway, but still...
Wow thought it was only me that had this problem, I have to manually select the audio portion all the time as well. What gives!?
And I'm having the opposite issue - media pairs 90% of the time, phone doesn't. And, it will NOT autoconnect.
How is it convenient that I hop in the car, drive away and phone doesn't connect. Instead I have to get the phone out, open up the BT menu and manually connect while I'm driving - real safety feature there Samsung lol
no issues in my 2011 Murano
I am on latest stock. Somehow my car Bluetooth audio was connected but phone audio was not getting selected
Sent from my PH-1 using Tapatalk
weird, the bluetooth car connection on mine works fantastic, and my car stereo's bluetooth is a piece of ****!
dryspuri said:
I am on latest stock. Somehow my car Bluetooth audio was connected but phone audio was not getting selected
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Did you have another Bluetooth device connected to your phone and the time your phone connected to your vehicle?
Charkatak said:
Did you have another Bluetooth device connected to your phone and the time your phone connected to your vehicle?
Click to expand...
Click to collapse
No it was only connection.
Sent from my PH-1 using Tapatalk
dryspuri said:
No it was only connection.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Hmm, the reason I asked is because when I had another phone with my smartwatch connected, then I entered my vehicle and realized that phone is connected by the phone calls were not. I found out that my watch took the priority in phone calls instead of my car.
Charkatak said:
Hmm, the reason I asked is that when I had another phone with my smartwatch connected, then I entered my vehicle and realized that phone is connected by the phone calls were not. I found out that my watch took the priority in phone calls instead of my car.
Click to expand...
Click to collapse
no phone is connecting to Bluetooth, music plays okay through Bluetooth but when a call comes voice won't be passed on when I select Bluetooth settings three options are there like phone audio, music, phone audio is not selected even if I try to click the box, it remains not selected, weird!!!!
dryspuri said:
no phone is connecting to Bluetooth, music plays okay through Bluetooth but when a call comes voice won't be passed on when I select Bluetooth settings three options are there like phone audio, music, phone audio is not selected even if I try to click the box, it remains not selected, weird!!!!
Click to expand...
Click to collapse
If you haven't done that yet: Delete Bluetooth pairing form both the phone and your car's stereo. Pair them again, but make sure to check for any dialog boxes which may ask for your permission to some feature. It could also be that your car's stereo needs a firmware update from your car's manufacturer.
Did all that. Now I am gonna try oreo and see if that helps.
Sent from my PH-1 using Tapatalk
One more thing to try. Go to Settings/Location, hit the 3 dot menu (scanning) and disable Bluetooth Scanning. Go back to the BT menu on the phone, delete the pairing if you haven't already, then try to pair again before jumping to Oreo (unless you just want Oreo). It should work and Phone/Media/Contacts should all be checked.
It's not an Essential problem, per se, just funky BT that is more problematic on Pioneer units for some reason.
Croak said:
One more thing to try. Go to Settings/Location, hit the 3 dot menu (scanning) and disable Bluetooth Scanning. Go back to the BT menu on the phone, delete the pairing if you haven't already, then try to pair again before jumping to Oreo (unless you just want Oreo). It should work and Phone/Media/Contacts should all be checked.
It's not an Essential problem, per se, just funky BT that is more problematic on Pioneer units for some reason.
Click to expand...
Click to collapse
Thanks for reply but on oreo now and everything works as it should.
Sent from my PH-1 using Tapatalk
Try rename your essential phone with a shorter name. It works for me after changing name to a shorter one.
Is working fine here on my 2015 Mazda 3.
I got the same problems. my iPhone and Nexus 6p work flawlessly, the essential connects but after a while it either disconnects or goes to (no media). Re-pairing doesn't work and reconnect either since the essential thinks is connected.
dryspuri said:
I am on latest stock. Somehow my car Bluetooth audio was connected but phone audio was not getting selected
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I did have a couple of hiccups. I had to go to the BT menu, select the device settings and check media audio and phone audio. No problem here after that either on stock or Beta 3.
Sent from my [device_name] using XDA-Developers Legacy app
Turn Bluetooth to non-optimized in battery settings ( 3 vertical dot button, upper right of battery settings)
twokidsandaphone said:
Turn Bluetooth to non-optimized in battery settings ( 3 vertical dot button, upper right of battery settings)
Click to expand...
Click to collapse
Seems to be better for now on stock essential firmware, it did run spotty, turning on and off a few times, but seems to have stabilized for now. Battery efficiency is noticeably worse, but it does warn about that when turning Bluetooth battery optimization off.
Never mind, it broke connectivity after a couple of hours, doesn't really fix it permanently.