Related
so i have a stock rooted a500 i got yesterday new.
have a problem..
10 minutes ago i was setting a wallpaper to a picture of my car. i cropped and set..wallpaper stayed black, so i did it again, still black. so i tried a different picture.
Crash
restarted, now stuck at lock screen, lock button doesnt slide, once you shut screen off, wont turn back on. clock doesnt move either. help?
Snag a paperclip
Hit that reset button.
Failing that, i'm at a loss. Never had anything remotely similar happen.
entropy.of.avarice said:
Hit that reset button.
Failing that, i'm at a loss. Never had anything remotely similar happen.
Click to expand...
Click to collapse
niether have i, i have a custom evo. reset button only restarts it
i didnt flash recovery yet, though i can access the files via usb when its locked at lock screen, so im going to try adb push
Good move
Or you can always toss a full stock ROM image on microSD and flash without custom recovery.
entropy.of.avarice said:
Or you can always toss a full stock ROM image on microSD and flash without custom recovery.
Click to expand...
Click to collapse
ok, adb sees no devices, so ill have to do it that way
where can i find a stock full rom for USA? seems full package links are dead
skullzaflare said:
where can i find a stock full rom for USA? seems full package links are dead
Click to expand...
Click to collapse
Not sure - never done any full package flashes, only update packages. Pretty sure I've seen a bunch of them around these fourms.
Best of luck - hope you don't have a dead tab.
entropy.of.avarice said:
Not sure - never done any full package flashes, only update packages. Pretty sure I've seen a bunch of them around these fourms.
Best of luck - hope you don't have a dead tab.
Click to expand...
Click to collapse
so far it seems i do, tried a update, and still does the same thing
it would be fine if i didnt have a custom boost animation in the system/media
i still have 12 more days warrenty.
is there a way to delete it via computer?
not sure if anyone knew about the hard reset, i contacted acer and played dumb, though i told them what happened.
i was instructed to
Power down the device
hold Vol Up + Power for 3 sec
continue holding Vol up, and keep switch the screen lock back and forth until "erasing cache" comes up on the acer screen
at which point you stop and let it run its course.
said it would take 30 minutes. i fell asleep, 2hrs later i checked it, still same. recontacted acer, another tech said to do the default hard restart with the push pin
worked like a charm
in process of rooting, installing CWM and making backup lol
skullzaflare said:
not sure if anyone knew about the hard reset, i contacted acer and played dumb, though i told them what happened.
i was instructed to
Power down the device
hold Vol Up + Power for 3 sec
continue holding Vol up, and keep switch the screen lock back and forth until "erasing cache" comes up on the acer screen
at which point you stop and let it run its course.
said it would take 30 minutes. i fell asleep, 2hrs later i checked it, still same. recontacted acer, another tech said to do the default hard restart with the push pin
worked like a charm
in process of rooting, installing CWM and making backup lol
Click to expand...
Click to collapse
Hello ,
Did have the same problem and solved it by flashing the update.zip found on this site.
I've put it on the root of the SD card , push start and holding vol down , and then perform the update .
Can you explain me tough what you men by " do the default hard restart with the push pin " .
Thanks
BerreZ said:
Hello ,
Did have the same problem and solved it by flashing the update.zip found on this site.
I've put it on the root of the SD card , push start and holding vol down , and then perform the update .
Can you explain me tough what you men by " do the default hard restart with the push pin " .
Thanks
Click to expand...
Click to collapse
the reboot is for if it stops responding, like a reset button on a computer. its under the usb port
flashing any update zip didnt work for me
skullzaflare said:
flashing any update zip didnt work for me
Click to expand...
Click to collapse
Did you get it from a local retail location? If so, I would just march back there with my receipt and not give too many details - i was working on a picture and it broke and I have no idea what is wrong, etc - they should just give you a new one.
Have you tried clearing the cache? There is a combo with holding power / volume up when booting and using the rotation lock switch, not quite sure how it is done but i think you just hold both and flip the switch like mad - totally sure I have seen the process posted here somewhere.
If you got it via online order, you still should be able to just return it.
Or call acer - they might be able to work some magic.
Best of luck, hope you get it going or at least get a new one. Really sounds like you have a defective unit, I rooted mine the day after I bought it, have had it for nearly two months and multiple rootings/unrootings/rom flashes and have had no issues at all.
Hey all I'm getting is the Archos screen then it freezes...I think I may have bricked it. I went into Dev edition and tried to format the whole device but that didn't work. I was running a rooted rom then the Graphics started acting funny. I went in tried to reset the firmware and now it's not working. Anyone have a fix I can attempt
sungod88 said:
Hey all I'm getting is the Archos screen then it freezes...I think I may have bricked it. I went into Dev edition and tried to format the whole device but that didn't work. I was running a rooted rom then the Graphics started acting funny. I went in tried to reset the firmware and now it's not working. Anyone have a fix I can attempt
Click to expand...
Click to collapse
Hi !
What version of rom you had installed before !
It was actually 4.0.7 from.you haha. I installed a few apps then the graphics got funny so I tried to repair next thing I know it freezes on the opening screen. I imagine i.just have to reflash the image but how can I adb push it if i.can't get my system on.
Moved to general.
sungod88 said:
It was actually 4.0.7 from.you haha. I installed a few apps then the graphics got funny so I tried to repair next thing I know it freezes on the opening screen. I imagine i.just have to reflash the image but how can I adb push it if i.can't get my system on.
Click to expand...
Click to collapse
can you try to see if adb works ?
> adb devices
let me know if it works ...:good:
I thought of that to but no device shows up in the a80s screen and in the frozen screen no device either
sungod88 said:
I thought of that to but no device shows up in the a80s screen and in the frozen screen no device either
Click to expand...
Click to collapse
Ok !
but how did you manage to install aRom for Gen9 in a Gen8 device ?
I'm using a g9 device Idk how we ended up.in g8 section.lol but it's the 80 g9 I tried everything I can think of
Anyone with some advice Also could a Mod please move this to G9 General. My device is the 80 G9. I can't push to ADB because the device won't boot. Is there anything else I can do?
GOT IT! Had the bright Idea to grab the small firmware from the Archos site and do the firmware update with it from the A80S menu! thank god lol
sungod88 said:
GOT IT! Had the bright Idea to grab the small firmware from the Archos site and do the firmware update with it from the A80S menu! thank god lol
Click to expand...
Click to collapse
Hi !
If you have SDE installed , try this :
- reset your device ! ( press & keep about 10 sec. on power button ! )
- now after release power button , press & keep volume down and also press and keep power button ! -> normal you will be able to see SDE menu !
- in SDE menu just Reformat System -> Reformat Device -> I undestand -> OK ! , connect USB cable and copy here official firmware 4.0.7 .aos file !
Good luck !
Hey guys
i just wiped all my data and tried to reboot my nexus, but now it's been stuck on the google logo for ages...
trying to flash to stock + unroot with nexus toolkit doesn't work, any way to unbrick it?
please help...
do you have fastboot driver installed?
Step 1: Power down your Nexus 4 (hold the power button until it shuts off) before rebooting into fastboot mode. You can do this by holding down the the Volume Down and Power buttons simultaneously.
Step 2: Connect your device to your computer. Open up a terminal or command prompt, and navigate to the folder containing the fastboot program.
Step 3: Type fastboot devices into the command line, and you should then see your device’s ID, which means fastboot is setup correctly.
now go back to Nexus 4 toolkit. Flash back to stock.
badboy47 said:
do you have fastboot driver installed?
Step 1: Power down your Nexus 4 (hold the power button until it shuts off) before rebooting into fastboot mode. You can do this by holding down the the Volume Down and Power buttons simultaneously.
Step 2: Connect your device to your computer. Open up a terminal or command prompt, and navigate to the folder containing the fastboot program.
Step 3: Type fastboot devices into the command line, and you should then see your device’s ID, which means fastboot is setup correctly.
now go back to Nexus 4 toolkit. Flash back to stock.
Click to expand...
Click to collapse
works
thank you very much
fabian.m said:
works
thank you very much
Click to expand...
Click to collapse
Then, press on his THANKS button. That's the way we have to measure who contributes or not in xda-developers. Please, let's follow rules...
luiseteyo said:
Then, press on his THANKS button. That's the way we have to measure who contributes or not in xda-developers. Please, let's follow rules...
Click to expand...
Click to collapse
well.. technically thanking isn't in the rules.
exb0 said:
well.. technically thanking isn't in the rules.
Click to expand...
Click to collapse
It is in the good behaviour and politeness rules. Not everything is written.
Hi guys i got a similar problem, i flashed a walkman .zip wiped cache and dalvik cache. Then the phone booted into google logo, and it went all black. The display is on but its all black. The problem is i cannot power off the device. Holding all buttons just restarts the phone. What can i do?
I was on latest PA rom
Qbsti said:
Hi guys i got a similar problem, i flashed a walkman .zip wiped cache and dalvik cache. Then the phone booted into google logo, and it went all black. The display is on but its all black. The problem is i cannot power off the device. Holding all buttons just restarts the phone. What can i do?
I was on latest PA rom
Click to expand...
Click to collapse
reflash your rom. reboot your device, hold volune down before it reboots to get into the bootloader then recovery.
simms22 said:
reflash your rom. reboot your device, hold volune down before it reboots to get into the bootloader then recovery.
Click to expand...
Click to collapse
Thanks simms, i managed to get into fast boot between the reboots, and I flashed the rom and gapps.
Damn it scared me even more then the red light issue that happened to me last month.
Qbsti said:
Thanks simms, i managed to get into fast boot between the reboots, and I flashed the rom and gapps.
Damn it scared me even more then the red light issue that happened to me last month.
Click to expand...
Click to collapse
not booting after flashing something or modding something is the easiest of all to fix, just reflash the rom(gapps and kernel too if need be), no need to wipe anything. since i test all the trinity kernels before any get released, and pre-kernels, i get many that dont boot my device or bootloop(among some other funky behaviors), reflashing a good kernel always works
I left my phone for a few minutes, and when I picked it up it was bootlooped again, and i had to use fastboot again. What should I do now? Maybe a factory reset would help me. I don't want more unexpected bootloops. :/
swyped from my nexus 4
Qbsti said:
I left my phone for a few minutes, and when I picked it up it was bootlooped again, and i had to use fastboot again. What should I do now? Maybe a factory reset would help me. I don't want more unexpected bootloops. :/
swyped from my nexus 4
Click to expand...
Click to collapse
Try another rom. You might have downloaded corrupted zips. Also, make sure you flash the things you need first. Eg, flash rom and gapps. Don't restore anything if you're using titanium backup. Try restarting the phone, see if it gets into a bootloop. If it doesn't, then try restoring apps from TB. (if you use TB.)
Hi!
I´ve got a big problem. Today i flashed the new PA version, but it seems that the download had some issue. I could install it but after a while, I wanted to reboot the phone and it got stuck at the Google logo. I can only access fastboot mode and recovery.
So the problem is, i made a full wipe, so i have no rom on the sdcard anymore. Also I am now able to enable the debbuging mode. I tried every toolkit i couzld find, but everyone needs debugging mode enabled. windows doesnt recognize the phone ( it says unkown device). So i tried to install the adb drivers, but nothing happens.
i wanted to try to push a rom with adb on the phone but it says no device found. i am such a noob, i hope some can help me.
thx
So heres my issue, ATT G2. Installed clean rom xe 1.1 then was dumb and used titanium to restore my app data, not system, just app. but someone that caused a system ui to keep crashing, so I got into recovery mode by holding down and power button (white screen that asks to reset to factory). Did that and it booted to TWRP ran a script and then went back to LG screen and then blank screen with flashing led and that's where it stayed, won't go any further.
I've put it in download mode now and am using LG flash tool but when I plug the phone in the box for COM41 in the flash tool just says waiting for connection and thats it. then when I unplug it it says failed, obviously. Is my phone a brick or can it be saved?
I think it's getting a model information check fail in lg flashtool, ugh this sucks.
bova80 said:
So heres my issue, ATT G2. Installed clean rom xe 1.1 then was dumb and used titanium to restore my app data, not system, just app. but someone that caused a system ui to keep crashing, so I got into recovery mode by holding down and power button (white screen that asks to reset to factory). Did that and it booted to TWRP ran a script and then went back to LG screen and then blank screen with flashing led and that's where it stayed, won't go any further.
I've put it in download mode now and am using LG flash tool but when I plug the phone in the box for COM41 in the flash tool just says waiting for connection and thats it. then when I unplug it it says failed, obviously. Is my phone a brick or can it be saved?
Click to expand...
Click to collapse
LOL, i just went through the same thing. I'll be posting a fix tonight I worked out with Scott.
"There is a "back door" method. This is why they updated TWRP by the way...
Download this: https://dl.dropboxusercontent.com/u/...with cmd.zip
Extract it to desktop. open the command.bat file.
Type "adb reboot recovery" then press enter. You need to keep doing this during the factory reset.
This assumes you have drivers installed. If you have no drivers installed for recovery mode then just select generic Google Nexus ADB drivers.
You kinda have to hammer the reboot recovery command. Its all timing... To hammer it... press the up arrow in the dos prompt and that will repeat the line. then press enter.
Keep doing it until you see it reboot to twrp and you should be able to sideload or load from storage.
It may take 10 or 15 minutes to get the exact right timing so dont give up.
And of course, this is all dependent upon you having the drivers already installed."
- Scott
For timing, you'll need to wait right when TWRP starts writing the script and start hammering it out. Timing is everything so when you see the TWRP screen starting hitting the up cursor and enter. It should load recovery. Don't bother using the tool, it won't work as it thinks your device is a D802 and won't be compatible with the dll. This will get you back to normal and from here you can just wipe and reinstall the rom again fresh with out losing media/data on the your drive.
I tried to download the file since I am in the same boat, but the dropbox is giving errors... Could you please repost the link to get the file? It would be greatly appreciated
MkV05 said:
I tried to download the file since I am in the same boat, but the dropbox is giving errors... Could you please repost the link to get the file? It would be greatly appreciated
Click to expand...
Click to collapse
When I get home to my personal desktop I'll be able to upload the link again. It's not my drop box but I have the files to upload to drop box and repost.
SamsungGalaxyStig said:
When I get home to my personal desktop I'll be able to upload the link again. It's not my drop box but I have the files to upload to drop box and repost.
Click to expand...
Click to collapse
Awesome, been waiting for this! Just to confirm, will the same file work for someone with a Verizon G2 who's having the same problem?
ccmbr002 said:
Awesome, been waiting for this! Just to confirm, will the same file work for someone with a Verizon G2 who's having the same problem?
Click to expand...
Click to collapse
I haven't tested it on VZW unfortunately. Check with scrosler. However, I assume it should be similar if not the same, but don't quote me on that.
Updated Link guys: https://www.dropbox.com/s/qsjwguwtlyczwdh/adb with cmd.zip
so I got it right when it said teamwin to reboot but everytime it reboot it tried to run the script and would never actually go into twrp. att is sending me a new phone but I'm worried when I send this one back they'll get me for being rooted.
SamsungGalaxyStig said:
I haven't tested it on VZW unfortunately. Check with scrosler. However, I assume it should be similar if not the same, but don't quote me on that.
Updated Link guys: https://www.dropbox.com/s/qsjwguwtlyczwdh/adb with cmd.zip
Click to expand...
Click to collapse
I just messaged him to double check - I don't have access to my phone for a few days (out of town) but if he hasn't responded by the time I get home I'll just go ahead and try it and post here if it works or not. Thanks again for sharing this file!
Got the file... and MANY THANKS!!! It allowed me to un-softbrick my G2 finally
this just isn't working for me, so hard to get it to get that command and when I do it still just reboots to the wiping partition script and reboots again. Think I'm screwed. Anything I can do in download mode or any other commands I can send? @SamsungGalaxyStig
video clip of what is happening
http://youtu.be/8U_mgYYxIpQ
here is what the script says
updating partition details
Running boot script....
Finished running bootscript,
Processing AOSP recovery commands....
----Wiping Data Partition----
Wiping data without data/media...
Done.
Removing all files under '/cache'
---- data partition wipe complete!
Done processing script file
Click to expand...
Click to collapse
bova80 said:
this just isn't working for me, so hard to get it to get that command and when I do it still just reboots to the wiping partition script and reboots again. Think I'm screwed. Anything I can do in download mode or any other commands I can send? @SamsungGalaxyStig
video clip of what is happening
http://youtu.be/8U_mgYYxIpQ
here is what the script says
Click to expand...
Click to collapse
The minute you see the twrp screen pop up start hammering away at the adb command listed before. after you type it once, you can keep pressing the up cursor and it will just replicate the previous command. You are opening up the cmd in the adb folder right?
SamsungGalaxyStig said:
The minute you see the twrp screen pop up start hammering away at the adb command listed before. after you type it once, you can keep pressing the up cursor and it will just replicate the previous command. You are opening up the cmd in the adb folder right?
Click to expand...
Click to collapse
yeah just tried it again and as soon as I hit it it starts rebooting again goes to TeamWin screen and then runs the same script I posted before and when it is done it reboots and then goes to blank screen. I had just put the latest twrp on the day before too so I don't understand why it isn't booting to it.
My biggest thing is will ATT freak and send the phone back once they get it and go to download mode and see it says rooted or if they try the hard reset and see it goes to a TeamWin screen.
side note, if I can type adb shell and get it to prompt me there, is there anything I can try and type quickly to have it do anything else?
bova80 said:
yeah just tried it again and as soon as I hit it it starts rebooting again goes to TeamWin screen and then runs the same script I posted before and when it is done it reboots and then goes to blank screen. I had just put the latest twrp on the day before too so I don't understand why it isn't booting to it.
My biggest thing is will ATT freak and send the phone back once they get it and go to download mode and see it says rooted or if they try the hard reset and see it goes to a TeamWin screen.
side note, if I can type adb shell and get it to prompt me there, is there anything I can try and type quickly to have it do anything else?
Click to expand...
Click to collapse
Are you constantly doing the adb recovery reboot? or once or twice?
SamsungGalaxyStig said:
Are you constantly doing the adb recovery reboot? or once or twice?
Click to expand...
Click to collapse
I did it a bunch of times continuously and it would just keep rebooting. Am I supposed to just keep doing that for 10-15min straight? How will I know if it gets into recovery if it just keeps rebooting when ever I keep doing that?
bova80 said:
I did it a bunch of times continuously and it would just keep rebooting. Am I supposed to just keep doing that for 10-15min straight? How will I know if it gets into recovery if it just keeps rebooting when ever I keep doing that?
Click to expand...
Click to collapse
Keep doing it, watch your phone as it will eventually boot into recovery itself without running script.
SamsungGalaxyStig said:
Keep doing it, watch your phone as it will eventually boot into recovery itself without running script.
Click to expand...
Click to collapse
when I'm sending that command though it never actually runs the script, it just reboots.
I'll try this out when I get home, hopefully my fingers don't get tired, lol. How long did it take you?
bova80 said:
when I'm sending that command though it never actually runs the script, it just reboots.
I'll try this out when I get home, hopefully my fingers don't get tired, lol. How long did it take you?
Click to expand...
Click to collapse
like 5-10 min at most. it's literally timing. and based on what i saw on the youtube video you were having the exact same problem. btw, you have your drivers installed correctly right? you can check that under device manager. BTW, are you using a PC or mac?
SamsungGalaxyStig said:
like 5-10 min at most. it's literally timing. and based on what i saw on the youtube video you were having the exact same problem. btw, you have your drivers installed correctly right? you can check that under device manager. BTW, are you using a PC or mac?
Click to expand...
Click to collapse
on a pc. when i go under device manager I think it says something like lg modem, I'll know for sure when I get home.
omg it finally worked! thanks, I eventually just gave up with the command prompt and it went in.
My HTC U Ultra suddenly froze past nigth, then it rebooted... and never came back, it won't go past the HTC logo over and over. I am not able to enter in recovery mode either, the only thing I can do is, by pressing both volume buttons and power, entering in what seems to be fastboot menu. In that state I can send the phone fastboot commands (no adb commands though) but If i try to wipe it it says "unable to do in s-on" or similar. I was pretty happy with this phone, and spent a few bucks in a new battery not two months ago.... anything I can do?
Thanks.
PS: I failed to state that the phone is stock, not unlocked or rooted.
If it has just happened out of the blue and you haven't been doing anything with your phone, have you tried a simple reset? (Press and hold volume down and power button until your phone vibrates - Usually about 20 seconds for me)
If not, and you are struggling to get into recovery etc, see if you can follow the method in the thread linked below if you are currently on stock rom!?
(Not sure if this would delete all your data or not, so perhaps only use as a last resort....)
https://forum.xda-developers.com/u-ultra/help/howto-unbrick-ultra-t3891033
spikey001 said:
If it has just happened out of the blue and you haven't been doing anything with your phone, have you tried a simple reset? (Press and hold volume down and power button until your phone vibrates - Usually about 20 seconds for me)
If not, and you are struggling to get into recovery etc, see if you can follow the method in the thread linked below if you are currently on stock rom!?
(Not sure if this would delete all your data or not, so perhaps only use as a last resort....)
https://forum.xda-developers.com/u-ultra/help/howto-unbrick-ultra-t3891033
Click to expand...
Click to collapse
Reset doesn't work, and the other procedure didn't work either.
If I leave it plugged to the charger, it will fall into an endless reboot loop. Sometimes (few) it will end up booting, but If i try to do something with the phone it doesn't respond and reboots again.
Thanks.
As you can send fastboot commands, can you flash a recovery.img (i.e. TWRP), and then wipe cache and dalvik/art to see if that helps, but if not, flash corresponding rom to that which you already have?
spikey001 said:
As you can send fastboot commands, can you flash a recovery.img (i.e. TWRP), and then wipe cache and dalvik/art to see if that helps, but if not, flash corresponding rom to that which you already have?
Click to expand...
Click to collapse
I tried that, too, but didn't work. If I do a fastboot devices it detects the phone, but if I do a fastboot getvar all it doesn't give me any information, it doesn't admit adb commands, when I try to flash a rom or a recovery, it fails, I suspect it needs to have the USB debugging enabled, but I can't enable it in this state.
As I said before, if I leave it plugged to the charger, It will randomly end up booting (it can happen in the third loop or in the 50th), but it will freeze or reboot again in few seconds.
Ah I see, if you haven't got USB debugging enabled then I am unsure how to help sorry. Have you got your media backed up, or stored on micro sd? If so, might have to bite the bullet and do a factory reset. Sorry I couldn't be of any help. Maybe someone else would be able to help you further?
spikey001 said:
Ah I see, if you haven't got USB debugging enabled then I am unsure how to help sorry. Have you got your media backed up, or stored on micro sd? If so, might have to bite the bullet and do a factory reset. Sorry I couldn't be of any help. Maybe someone else would be able to help you further?
Click to expand...
Click to collapse
The data is not a problem, every important file has been backed up.
Regarding factory reset, since the device won't go to recovery, I can't see how can I do it.
-- Edit --
I noticed that when the phone is cold, those few times it boots, it lasts a little bit more (a matter of seconds) until it freezes again, so I tried to leave it in the freezer for a few minutes, and tried to boot it, and had enough time to do a factory reset. The factory reset worked, because now, when it boots, it goes straight to the intial setup, but keeps hanging after a few seconds. I suspect that the internal memory was somehow damaged, I don't think there is much left to do...
Is it possible to skip setup in order to get to settings and enable USB debugging so you can install a recovery?
If you can, then it might be an idea to try performing a repair of all the partitions and install a fresh ROM... Just to ensure it isn't a hardware issue!!
spikey001 said:
Is it possible to skip setup in order to get to settings and enable USB debugging so you can install a recovery?
If you can, then it might be an idea to try performing a repair of all the partitions and install a fresh ROM... Just to ensure it isn't a hardware issue!!
Click to expand...
Click to collapse
I can't see how to skip initial setup... and I don't have time enough to go through it, the phone will hang in 30 seconds or less. At this point, I really needed a working phone, so I bite the bullet and bought a new one... I will deal with the old one later, or I might sell it for parts.
Thanks everybody for the help.
No worries, enjoy your new phone