how can i install v10 baseband for my phone. i want use freel5 rom but don't work. because i haven't v10 baseband. how can i install or use v10 baseband?
Search for either v10baseband or v20, in this forum. it will be a zip file. Flash through recovery.
Sent from my LG-E610 using XDA Premium 4 mobile app
http://forum.xda-developers.com/showthread.php?t=2335273
can you send v10 kdz file
can you send v10 kdz file i cant find anywhere.
Install baseband v10 or v20 in recovery.
but..
v10 baseband can flash with kdz but what can i install v10 baseband with cmw ? can you send zip v10 baseband ?
Question should not be in Android Development section.
I have reported mod to move this thread to Q & A Section.
F4uzan said:
Question should not be in Android Development section.
I have reported mod to move this thread to Q & A Section.
Click to expand...
Click to collapse
ok
I told you, install baseband v10 or v20 [.zip] in recovery.I gave you before a link to site.
Related
hello there, i bought the international version of I9505 after my I9500 got stolen...
i installed Philz Touch revocery, CF auto root for the same model and Omega V9.0 JB4.2.2
no after i rebooted my phone i realized that theres no wifi connection available on my device.
on the main thread of the ROM theres a section that says that i need to install the LTE modem of the phone to make it work.
the file is for the XXUBMGA baseband and my baseband is XXUBMAE.
i downloaded and flashed properly the XXUBMAE modem but its not working, can i install the XXUBMGA on my phone?
i dont want to Brick my new phone with unmatching basebands and modem/ROMs...
asafhaim147 said:
hello there, i bought the international version of I9505 after my I9500 got stolen...
i installed Philz Touch revocery, CF auto root for the same model and Omega V9.0 JB4.2.2
no after i rebooted my phone i realized that theres no wifi connection available on my device.
on the main thread of the ROM theres a section that says that i need to install the LTE modem of the phone to make it work.
the file is for the XXUBMGA baseband and my baseband is XXUBMAE.
i downloaded and flashed properly the XXUBMAE modem but its not working, can i install the XXUBMGA on my phone?
i dont want to Brick my new phone with unmatching basebands and modem/ROMs...
Click to expand...
Click to collapse
Flash a kernel like KT and it will work and this thread is not belong here!
asafhaim147 said:
hello there, i bought the international version of I9505 after my I9500 got stolen...
i installed Philz Touch revocery, CF auto root for the same model and Omega V9.0 JB4.2.2
no after i rebooted my phone i realized that theres no wifi connection available on my device.
on the main thread of the ROM theres a section that says that i need to install the LTE modem of the phone to make it work.
the file is for the XXUBMGA baseband and my baseband is XXUBMAE.
i downloaded and flashed properly the XXUBMAE modem but its not working, can i install the XXUBMGA on my phone?
i dont want to Brick my new phone with unmatching basebands and modem/ROMs...
Click to expand...
Click to collapse
Install this Kernel
you are 100% right. i was looking for a kernel and then i accidently opened that thread on this section and not Q&A...
ill try that download, thanks!
BTW how to i install this one? change the ZIP to BIN\TAR\MD5
asafhaim147 said:
you are 100% right. i was looking for a kernel and then i accidently opened that thread on this section and not Q&A...
ill try that download, thanks!
BTW how to i install this one? change the ZIP to BIN\TAR\MD5
Click to expand...
Click to collapse
Flash the file via recovery
alexanter the great said:
Flash a kernel like KT and it will work and this thread is not belong here!
Click to expand...
Click to collapse
sanoc69 said:
Install this Kernel
Click to expand...
Click to collapse
Crauze said:
Flash the file via recovery
Click to expand...
Click to collapse
well, thank you very much! will check it out
If you installed a diff. modem it won't brick your phone just your mobile data won't work. Omega rom isn't stable lot's of bug try Wanam lite.
Sent from my GT-I9505 using xda premium
Thanks a lot for all your answer !
Hours that i don't get wifi working after flashing my I9505XXUBMGA_I9505OXXBMG3_XEF , and now it works ! THANKS
I flashed wrong rom on my AT&T LG G2 so whem i use LGFLASH Tool to go back to stock it tells me wrong model number cause is tellin me my model number is D802 but the stock rom is D800 so I dont know what to do please help.. thanks advance..
Restore a backup made while on an 800 rom or flash a Tom through recovery made for the 800. You could also use an app like rom toolbox to edit the build prop to read D800.
bps119 said:
Restore a backup made while on an 800 rom or flash a Tom through recovery made for the 800. You could also use an app like rom toolbox to edit the build prop to read D800.
Click to expand...
Click to collapse
I cant restore i did a data reset so phone is no longer rooted and is hard to reroot since I cant get into developers options..I can get into download mode and use flash tool, but theres no at&t kdz roms they all zips..
How is it people never look in the stickies.
http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my LG-D800 using XDA Premium HD app
Intub8 said:
How is it people never look in the stickies.
http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my LG-D800 using XDA Premium HD app
Click to expand...
Click to collapse
I did that and it teels me wrong model number thats what i been trying to do..
I'm having a similar problem to yours:
http://forum.xda-developers.com/showthread.php?p=47610546#post47610546
does your touch screen work properly?
do you get random reboots?
I have this problem also same as bori22
bori22 said:
I flashed wrong rom on my AT&T LG G2 so whem i use LGFLASH Tool to go back to stock it tells me wrong model number cause is tellin me my model number is D802 but the stock rom is D800 so I dont know what to do please help.. thanks advance..
Click to expand...
Click to collapse
Are you using a D802 stock ROM to flash your phone back?
Where did you get your stock ROM from?
bori22 said:
I flashed wrong rom on my AT&T LG G2 so whem i use LGFLASH Tool to go back to stock it tells me wrong model number cause is tellin me my model number is D802 but the stock rom is D800 so I dont know what to do please help.. thanks advance..
Click to expand...
Click to collapse
Try to adb sideload a ROM for the D800 (CleanROM is pretty close to stock without all the bloatware).
I have the same problem and have not been able to resolve it. Any update on how your problem was fixed?
HELP!!!!!!!
we have basically the same problem, except i flashed a L01f rom instead of d802. I am stuck in download mode(no recovery or fastboot or adb & will not boot rom). When i try to flash back to stock it says wrong model( i have the d800 and am using the d800 dll & tot file). My device is coming up as an L01f on lg flash tool and download mode.... someone help it is a d800 att.
Try using the .dll found at http://forum.xda-developers.com/attachment.php?attachmentid=2473543&d=1387955530
Just flash your phone like you normally would, except you use the .dll linked above instead. Apparently the DLL linked above is a general LG G2 DLL that works for all models.
Note: When I flashed my phone, LG FlashTool gave me an error at the end of the flash process, but the flash was still successful.
Hello i've got this problem and i don't know what to do, after installing the lattest rom from cyanogen i get no signal, no imei...please help my with my problem.
I've tried to install the stock rom with kdz but no luck because the phone is not found.
Sorry for my bad english.
You have to flash the correct baseband. For this ROM, download the V20 baseband and your problem will be fixed.
Sent from my LG-P700 using xda app-developers app
For cm10 v10 and for example cm 10.2 v20
Each ROM from 4.2 to 4.4 have to be used with a V20 baseband, and V10 for 4.1 ROMS !
Sent from my LG-P700 using xda app-developers app
LG P700 Lost IMEI
Hello!
I would like to ask for help. I flashing my LG P700, and afterwards you do not see the IMEI number, will not occur in the network, you can not make phone calls with your device! If you can help me to restore the original IMEI number in order to use the device.
falshing this first: cm-10-20131006-nightly-p700.zip then this: aokp_p700_kitkat_unofficial_2014-02-17.zip and then again with it, because it did not work well the other: cm-10-20131006-nightly-p700.zip and has not operates on the GSM part, IMEI no. How do I move the topic? Pls. help, how flashing correct baseband. Thanks for your response!
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
DireArcticWolf said:
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
Click to expand...
Click to collapse
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
thanks
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
Thank you sssoooooo much, after a week of pulling my hair out I am happy to say I now have CM11 on my G2.
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Plain Water said:
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
markula78 said:
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
Click to expand...
Click to collapse
I just download the Freegee app ant updatet to 2.6.3.3 and it work, if any other with LG 802 have problems.
Good to know. Thanks for the post.
Sent from my LG-D801 using XDA Premium 4 mobile app
I am experiencing installing abortion problems and error status 7 while installing the omni rom 2.1 and flex rom. I am currently using the phiz recovery. Anyone has any idea how to solve the problem?
Sent from my LG G2 using Tapatalk
bump
Sent from my LG G2 using Tapatalk
which g2 model do you have also what rom are you currently running/if on stock what firmware and version of philz are you running?
XxZombiePikachu said:
which g2 model do you have also what rom are you currently running/if on stock what firmware and version of philz are you running?
Click to expand...
Click to collapse
I am using the d803 model. I am currently running omni 2.0 rom. I have tried all verison of phiz recovery and still receiving the same error.
Sent from my LG G2 using Tapatalk
well as I don't have this model I can't be of much help but while looking through the omnirom thread there are very few people who use philz and in the flashing procedure it suggest you us twrp or philz so you might want to try with a different recovery and maybe the results will be different, good luck :fingers-crossed:
XxZombiePikachu said:
well as I don't have this model I can't be of much help but while looking through the omnirom thread there are very few people who use philz and in the flashing procedure it suggest you us twrp or philz so you might want to try with a different recovery and maybe the results will be different, good luck :fingers-crossed:
Click to expand...
Click to collapse
Do u have a flashable zip for the twrp recovery for the d803 model
Sent from my LG G2 using Tapatalk
Edward Zhuang said:
Do u have a flashable zip for the twrp recovery for the d803 model
Sent from my LG G2 using Tapatalk
Click to expand...
Click to collapse
I don't but ive looked around and found this http://forum.xda-developers.com/showthread.php?t=2449679, if your is the rogers d803 than you shoud be able to flash it