[Q] Disabling S5 Home wake function - Galaxy S 5 Q&A, Help & Troubleshooting

Hi, all.
Not sure if this has been covered, trust me I've searched, but can I disable the wake on home button function? I've rooted, and tried various options that have been posted for earlier versions, but alas the S5 still wakes up when I press the home key.
Hate it, as I've pocket dialled the missus a few times already!

nicks75 said:
Hi, all.
Not sure if this has been covered, trust me I've searched, but can I disable the wake on home button function? I've rooted, and tried various options that have been posted for earlier versions, but alas the S5 still wakes up when I press the home key.
Hate it, as I've pocket dialled the missus a few times already!
Click to expand...
Click to collapse
Look into the 'Xposed' framework installer and then Wanam Xposed module (if your ROM supports it?). There's a tweak in Wanam's module to turn off the wake on home.
I've only just started using this myself with Omega v1.9 ROM (which has it built in if you pick it in the Aroma installer when flashing the ROM), so can't really tell you more than that... It's like being able to edit bits of the ROM but using a simple GUI instead of having to get into the code yourself.
Hope that helps!

Bisonator said:
Look into the 'Xposed' framework installer and then Wanam Xposed module (if your ROM supports it?). There's a tweak in Wanam's module to turn off the wake on home.
I've only just started using this myself with Omega v1.9 ROM (which has it built in if you pick it in the Aroma installer when flashing the ROM), so can't really tell you more than that... It's like being able to edit bits of the ROM but using a simple GUI instead of having to get into the code yourself.
Hope that helps!
Click to expand...
Click to collapse
Thanks for your reply, but I've already tried that. Also tried editing gpio-keys.kl and removing WAKE_DROPPED from key 172. Still no luck.

nicks75 said:
Thanks for your reply, but I've already tried that. Also tried editing gpio-keys.kl and removing WAKE_DROPPED from key 172. Still no luck.
Click to expand...
Click to collapse
Apologies if you do already know what you're doing with this (I didn't!), but this might help to get it working:
Do you know that you have to enable/install the framework and then enable the Wanam module all from within the 'Xposed installer' first?
I didn't and expected mods to work immediately having edited the settings in 'Wanam Xposed' but found I hadn't yet installed the framework or enabled the module!
There are some other tweaks in Wanam Xposed that I found didn't work (quite right/at all) with Omega v1.9, so not all options are supported on this ROM.

Bisonator said:
Apologies if you do already know what you're doing with this (I didn't!), but this might help to get it working:
Do you know that you have to enable/install the framework and then enable the Wanam module all from within the 'Xposed installer' first?
I didn't and expected mods to work immediately having edited the settings in 'Wanam Xposed' but found I hadn't yet installed the framework or enabled the module!
There are some other tweaks in Wanam Xposed that I found didn't work (quite right/at all) with Omega v1.9, so not all options are supported on this ROM.
Click to expand...
Click to collapse
OH....MY....GOD!!
Thankyou so much, that seems to have worked PERFECTLY!

deleted

Related

[ROM][Mega PACK] d8389 NF1, NG1, NH2, NI1, NI3

Installation:
1. Make backup if possible.
2. Install CWM & root. Disable knox.
3. Flash pack by CWM.
4. Install busybox (free).
If something wrong:
1. Go to download mode.
2. Re-flash your original ROM.
No wipes needed.
​
Thanks to:
LegendK
Jkay
Current version - 1.1.1 28/06/14
I9295XXUCNE5 - PHN Odex - http://pc.cd/Hyh
I9295XXUCNF1_MM1 Odex - http://pc.cd/4uS
I9295VJUCNG1_ZTO Odex - http://pc.cd/7SB
I9295XXUCNG1 - ILO Odex - http://pc.cd/6su
I9295XXUCNH2 - XEF & BTU (may be DRE) Odex - http://pc.cd/NmW
I9295XXUCNI1 - HOM Odex http://pc.cd/JO1
I9295XXUCNI3 - SEB Odex http://pc.cd/VsT
I9295XXUCNK4 - TWO Odex https://my.pcloud.com/publink/show?code=XZgLv7ZgDDQSuMphY8XmgL4dzslmH0FdpQX
I9295XXUCNK5 - SER Odex https://my.pcloud.com/publink/show?code=XZVBykZ29s6gEiEXvF4sNPkpEgB1V8Cjoi7
I9295XXUCNL5 - SER Odex http://pc.cd/h0V7
Deodex for NE4, NE5, NF1 (not tested) - http://pc.cd/PVS
Installation:
Flash by CWM on stock rooted (this file will not root device) ROM.
Revert back:
Flash your ROM by Odin. You need not delete data.
White theme (this is not ROM, but only color theme, you can flash it independent of ROM patch) - http://pc.cd/g3b
Change log:
Alpha1 - 31/05/14
- Fixed KK external SD write issue
- Slightly increased headphones volume
- Added some CSC tweaks (too manu, to list, see in /system/csc/feature.xml & language.xml)
- Added bysybox
- Added quick launch bar
- Added custom battery settings
- Added custom clock settings
- Added status bar color settings (works strange on KK and may be useless, I'll look at again later)
- Added Alarm, Bluetooth, Sound icons settings
- Added next alarm notification and traffic meter to notbfication area
- Changed "Clear All" button to AOSP style
- Added bacground color settings of notification area
- Added show/hide notification titles settings
and more, that I don't remember
Alpha2 - 1/06/14
- Added water cover warning settings
- Added lo battery notification settings
- Added full battery notification settings
Alpha3 - 1/06/14
- Added IME switch settings
- Added Auto brightness control
A4 - 4/06/14
- Added MultiWindow control
- Click on clock in notification will start Clock Application, On Date will start Calendar. Long click - Date settings.
A5 - 6/06/14
- Fix Torh Light on by volume button when in a call
- Added settings for kill application by back long click and home double click.
A6 - 7/06/14
- Added kill app by long menu press
- Added "Allow All Rotations" state to rotation toggle.
- Fixed busybox.
A7 - 7/06/14
- Changed Quick Settings color
- Added Power Menu. Please report bugs, if any. Thanks.
A8 -12/06
- Fixed A7 installation issue
- If custom battery selected and bad battery/charge condition occurs, both stock and custom battery will be dicplayed.
- Added "Hide quick settings" setting.
Beta1 - 12/06
- Added driving and dormant mode notification settings
- Added delay after call setting
- Caller name in 2 lines
- GSM/WCDMA/LTE selection in setting always enabled
- Call recording settings
- Increasing ringer settings
Pre1 - 13/06
- Removed redundant text battery
- Added back Lucid battery
Pre2 - 16/06
Disabled secure storage daemon. Seems to be knox related. It crahing after start on rooted ROM and restarted by kernel every 4sec. Comsumes CPU & battery. Useless.
v1.0 16/06
- Long caller name in 2 lines now works.
v1.0.1
- Experimental. Possible fix for Android 4.4.2 silence during call issue. Please report if you still have this issue.
- Removed debugging information from all altered framework parts (smaller, faster).
v1.0.2 - 20/06
- Fixed some settings issues.
1.0.3- 23/06
- Bug fixes
1.0.4 - 24/06
- Added stock battery %% display and color control.
- Added full battery display to some custom batteries.
1.1.14 - 16/09
- Minor fixes
- Added number of quick toggles setting
- GLONASS fix from 9505
- White theme updated. Apply AFTER pack. No reboot needed between SuperSU, pack & theme installation.
nice! finally a custom rom! will try it and post m impressions here. thank you so much!
Gesendet von meinem GT-I9295 mit Tapatalk 4
share invalid
Would like to try out the v2.0 ROM but the rapishare links are broken, when you try to open them you get "invalid share", same error also for modems for v2.0
Can you please fix this and please do not use Rapidshare anymore. the download of v1.0 is 36 hours for non premium users, hotfile or goo.im are much better in download times. I mean who wants to leave it's PC running for 36 hours just for downloading the rom? I guess download time for v2.0 is the same.
Thanks a lot
marcelser said:
Would like to try out the v2.0 ROM but the rapishare links are broken, when you try to open them you get "invalid share", same error also for modems for v2.0
Can you please fix this and please do not use Rapidshare anymore. the download of v1.0 is 36 hours for non premium users, hotfile or goo.im are much better in download times. I mean who wants to leave it's PC running for 36 hours just for downloading the rom? I guess download time for v2.0 is the same.
Thanks a lot
Click to expand...
Click to collapse
fixed
d8389 said:
fixed
Click to expand...
Click to collapse
i can confirm that it takes >1 day to download the rom because of Rapidshare's speed limiting, please upload the rom to a different file hosting site
carmatic said:
i can confirm that it takes >1 day to download the rom because of Rapidshare's speed limiting, please upload the rom to a different file hosting site
Click to expand...
Click to collapse
Trying romcook.com now.
d8389 said:
Trying romcook.com now.
Click to expand...
Click to collapse
searching for 'i9295' only brings up mf5 and mh2 roms, both uploaded by 'jupiter' in august
carmatic said:
searching for 'i9295' only brings up mf5 and mh2 roms, both uploaded by 'jupiter' in august
Click to expand...
Click to collapse
still uploading
d8389 said:
still uploading
Click to expand...
Click to collapse
Download links updated.
d8389 said:
Download links updated.
Click to expand...
Click to collapse
Thank you very much for the additional download links
d8389 said:
Download links updated.
Click to expand...
Click to collapse
downloading now and it will complete in 1 hour, a big improvement from 1 day, thank you
carmatic said:
downloading now and it will complete in 1 hour, a big improvement from 1 day, thank you
Click to expand...
Click to collapse
i downloaded and testing it now everything working but you will need a modems and wright them with odin without modems WiFi not work at all
flashed modems and non-hlos to PHONE in Odin, but Wifi still doesnt work... looks like i'll have to download the stock mh3 firmware
carmatic said:
flashed modems and non-hlos to PHONE in Odin, but Wifi still doesnt work... looks like i'll have to download the stock mh3 firmware
Click to expand...
Click to collapse
May be it's better to release patch to stock ROM?
It much smaller then whole custom ROM file.
carmatic said:
flashed modems and non-hlos to PHONE in Odin, but Wifi still doesnt work... looks like i'll have to download the stock mh3 firmware
Click to expand...
Click to collapse
I flashed modem restart WiFi not worked
after that flashed non-hlos restarted and everything worked !
I love this rom
d8389 said:
May be it's better to release patch to stock ROM?
It much smaller then whole custom ROM file.
Click to expand...
Click to collapse
yes, that would be very helpful indeed , give people the option to have a clean rom install
::edit:: i have restored the wifi on my phone... the non-hlos has to be installed with odin one phone restart after installing modem
however, pressing the home key does not return to the home screen ... pressing the home key when the screen is off will turn the screen on, and long pressing the home key will bring up the 'task manager' , but now the only way to get back to the home screen seems to be hitting the back button until you exit from the app you are in ::edit:: it seems to work now , installed xposed framework and soft rebooted, and the home key works properly
Thanks, I was finally able to run the wifi on a different rom JUAMG3_TTT.
great job
Excuse my English, is Google Translate
greetings from Colombia
carmatic said:
yes, that would be very helpful indeed , give people the option to have a clean rom install
::edit:: i have restored the wifi on my phone... the non-hlos has to be installed with odin one phone restart after installing modem
V[SgTRIKE]holwever, pressing the home key does not return to the home screen ... pressing the home key when the screen is off will turn the screen on, and long pressing the home key will bring up the 'task manager' , but now the only way to get back to the home screen seems to be hitting the back button until you exit from the app you are in[/STRIKE] ::edit:: it seems to work now , installed xposed framework and soft rebooted, and the home key works properly
Click to expand...
Click to collapse
One time it happened only for me. It not related to Xposed, but something related to Samsung's single/double click home check. Now, I've made some changes and cleanup. Hope, it will newer come back, but not sure, because could not reproduce.
it seems that battery life is not as good as it was before i flashed this rom, the battery drains noticably faster
in fact, i am using my phone as a modem to get my computer online via usb tethering.... and it is actually using the battery faster than it is charging... it would be nice if it could at least 'break even' in terms of power received via usb vs power consumption when tethered

Hardware keys: how to set turn on the backlights only pressed

hello everyone, I would like to know how to configure the hardware keys in Gpe / AOSP / AOKP ROMs to only turn on when pressed and not all the time, for example, when the screen is touched. I have found ways to completely disable, but not exactly what I'm looking for.
biazoto said:
hello everyone, I would like to know how to configure the hardware keys in Gpe / AOSP / AOKP ROMs to only turn on when pressed and not all the time, for example, when the screen is touched. I have found ways to completely disable, but not exactly what I'm looking for.
Click to expand...
Click to collapse
Try it with the xPosed Moduls from here: http://repo.xposed.info/module/de.robv.android.xposed.installer
Than install the Modul GravityBox
Tkkg1994 said:
Try it with the xPosed Moduls from here: http://repo.xposed.info/module/de.robv.android.xposed.installer
Than install the Modul GravityBox
Click to expand...
Click to collapse
I already have installed Xposed and use several modules, including gravitybox, but what I seek is a way to configure them so that only light up when they are pressed, as is by default the official ROMs tw and some GPE like the kangakat. in all ROMs I have tested in recent days, by touching the screen, the buttons light up and not thought it was cool. In tested ROMs, as well as in gravitybox, there is only the option to permanently disable the lights of the buttons and that is not what I seek. maybe there is some file or script that can be changed to that setting?

[sense toolbox] install on marshmallow [M8_UL]

Hello everybody, This guide is only for Marshmallow stock rom users. (don't know the condition for verizon & sprint. maybe cause to a brick for them.) It is little bit difficult to install xposed framework to work sense toolbox for some users.This is for them.
Instructions
1) Download the files mentioned at the bottom.
2) Root device through TWRP. (SuperSU-v2.76)
3) Install "xposed-installer-arm.zip"
4) Reboot system. (Don't think device got bricked. It will take few minutes.)
5) install both applications. (enjoy different benefits)
Thanks & credits
@ TeamWin for TWRP
@ Chainfire for SuperSU
@ rovo89 & Tungstwenty for xposed installer
@ Langer Hans & mikanoshi for sense toolbox
when tick controls mods, toolbox doesn't work.(volume2wake, quick flashlight) But when untick them & soft reboot device, it will work like before. (always it is not suitable to make several changes at once. in one turn try changing one.)
tool box helped me to fix some problems personally.
1) to control gestures.
2) disable quick settings drawer on secure lock screen.
3) vibrate on connect.
Android 6 is not supported by Sense tool box, so...
wloky said:
Android 6 is not supported by Sense tool box, so...
Click to expand...
Click to collapse
it supports. but some mods are not working.

Enable on-screen NavBar on Stock ROOTed Nougat? A2017U

Any way to enable the onscreen navbar on Nougat?
I used Root Browser to edit the build.prop to change the 0 at the end of this to 1 and back again
qemu.hw.mainkeys=1
Click to expand...
Click to collapse
But had no luck after reboot either way.
Any way to enable them?
It didn't work in MM because ZTE took the on screen buttons out of the framework, rather than just from the build.prop line.
I'm guessing they did the same thing in N.
needs more than just build.prop to enable on-screen key......i'll be releasing Dmix7_N (Stock Base) but on-screen keys will be disabled by default via build.prop and re-enable via build.prop
That's odd cause when I went from lineage back to stock the nav bar followed. Full wipe, full stock zip.
I have on screen working but capacitive buttons still work as well. Does anyone know of a way to turn capacitive buttons completely off and only use on screen?
t2jbird said:
I have on screen working but capacitive buttons still work as well. Does anyone know of a way to turn capacitive buttons completely off and only use on screen?
Click to expand...
Click to collapse
Button mapper.
My stock Rooted B15 Nougat version just has an option to activate on-screen Navbar...
Setings->Features->Navigation Keys.
Is that what you meant?
iNaruX said:
My stock Rooted B15 Nougat version just has an option to activate on-screen Navbar...
Setings->Features->Navigation Keys.
Is that what you meant?
Click to expand...
Click to collapse
That's really weird, mine didn't have that? Only thing I had under "Navigation Keys" was the ability to swap them but not display them on screen?
I did, however, flash the vR26 Permissive kernel, and that automatically enabled the onscreen buttons......It also made Nougat much smoother
I'm running the B15 from DrakenFX.
Here's a screenshot from that setting.
http://i.imgur.com/3RvqIlY.jpg
DrakenFX said:
needs more than just build.prop to enable on-screen key......i'll be releasing Dmix7_N (Stock Base) but on-screen keys will be disabled by default via build.prop and re-enable via build.prop
Click to expand...
Click to collapse
you keep promise that... I'm still waiting on your ROM
iNaruX said:
I'm running the B15 from DrakenFX.
Here's a screenshot from that setting.
http://i.imgur.com/3RvqIlY.jpg
Click to expand...
Click to collapse
Been meaning to reply to this with a screenshot from "stock rooted".. There is no option to "Always show navigation bar" in stock. Not sure if DrakenFX added that, or what?
I do know the Beast Mode Permissive kernel will enable them, and I used it for a couple weeks, but while that kernel is really smooth and I had my on-screen navbar.... My battery took a fairly huge hit, and my stock camera didn't work. So I reverted back to pure, rooted, stock.
Bumping. I want to go back to the latest stock but I won't do it without onscreen nav buttons.
p4ch1nk0 said:
Bumping. I want to go back to the latest stock but I won't do it without onscreen nav buttons.
Click to expand...
Click to collapse
Fairly easy.
When rooted open build.prop (system/)
Change ro.config.navkeys=1 to 0 (ZTE kept it by default to 1 so you don't see the setting)
Leave qemu.hw.mainkeys=0 like it is
Save, restart and you'll have your enabled nav bar on stock devices.
Btw, you can disable it through settings so you can, if you want, swype down to not see it anymore.
raystef66 said:
Fairly easy.
When rooted open build.prop (system/)
Change ro.config.navkeys=1 to 0 (ZTE kept it by default to 1 so you don't see the setting)
Leave qemu.hw.mainkeys=0 like it is
Save, restart and you'll have your enabled nav bar on stock devices.
Btw, you can disable it through settings so you can, if you want, swype down to not see it anymore.
Click to expand...
Click to collapse
I changed the ro.config.navkeys=0 and i still haven't seen the on screen nav bar
nmk_123 said:
I changed the ro.config.navkeys=0 and i still haven't seen the on screen nav bar
Click to expand...
Click to collapse
First do check in settings/features/navigation keys/check always ON wether it works (you can disable it afterwards by putting it on "OFF" and have the possibility to swype up or down afterwards)
Second, try swype upwards from the bottom to see the navbar.
Check also if qemu.hw.mainkeys=0 is still 0.
It should work because these are simple build.prop scripts, so test out :good:
raystef66 said:
First do check in settings/features/navigation keys/check always ON wether it works (you can disable it afterwards by putting it on "OFF" and have the possibility to swype up or down afterwards)
Second, try swype upwards from the bottom to see the navbar.
Check also if qemu.hw.mainkeys=0 is still 0.
It should work because these are simple build.prop scripts, so test out :good:
Click to expand...
Click to collapse
Thanks, I double checked qemu.hw.mainkeys=0 is still 0.
Navigation menu doesn't have any new option.
Tried to swipe up and down as well, nothing
nmk_123 said:
Thanks, I double checked qemu.hw.mainkeys=0 is still 0.
Navigation menu doesn't have any new option.
Tried to swipe up and down as well, nothing
Click to expand...
Click to collapse
OK. Lets try to figure it out.
Have you rebooted phone ?
Have you a G version ?
Can you upload me your build.prop pls. I'll take a look on it.
raystef66 said:
OK. Lets try to figure it out.
Have you rebooted phone ?
Have you a G version ?
Can you upload me your build.prop pls. I'll take a look on it.
Click to expand...
Click to collapse
Thanks for trying to figure this out with me. I really appreciate it.
I have a U version but I'm actually using your [ROM][AROMA][A2017G][B08 7.1.1.][stock] SL!M³ DF!NR. I'm tempting to checkout ur [ROM][AROMA][A2017][V2.0.0B13 M!Favor 5.0 / 7.1.1.][stock] SL!M DF!NR to see if it makes any difference.
This is my build.prop
https:// drive . google . com/file/d/1pyEZtZxVONEiinIc9pNnv35VPwyno6Ij/view?usp=sharing
Sorry im not allowed to post outside links yet so have to do this
nmk_123 said:
Thanks for trying to figure this out with me. I really appreciate it.
I have a U version but I'm actually using your [ROM][AROMA][A2017G][B08 7.1.1.][stock] SL!M³ DF!NR. I'm attempting to checkout ur [ROM][AROMA][A2017][V2.0.0B13 M!Favor 5.0 / 7.1.1.][stock] SL!M DF!NR to see if it makes any difference.
This is my build.prop
https:// drive . google . com/file/d/1pyEZtZxVONEiinIc9pNnv35VPwyno6Ij/view?usp=sharing
Sorry im not allowed to post outside links yet so have to do this
Click to expand...
Click to collapse
No problem. We're here to help each other out :good:
I'll give a look at your build.prop later on.
But do try the Mifavor 5.0. As I'm not mistaken, the option is built in too. So nothing to change there. And this rom is quite smooth, fast and without force closes. Perhaps try it and let me know.
Tomorrow I'll take a look at your file.
nmk_123 said:
Thanks for trying to figure this out with me. I really appreciate it.
I have a U version but I'm actually using your [ROM][AROMA][A2017G][B08 7.1.1.][stock] SL!M³ DF!NR. I'm tempting to checkout ur [ROM][AROMA][A2017][V2.0.0B13 M!Favor 5.0 / 7.1.1.][stock] SL!M DF!NR to see if it makes any difference.
This is my build.prop
https:// drive . google . com/file/d/1pyEZtZxVONEiinIc9pNnv35VPwyno6Ij/view?usp=sharing
Sorry im not allowed to post outside links yet so have to do this
Click to expand...
Click to collapse
Looked into your build.prop and all should be ok. And since you installed the SLIM³ all files such as framework-res.apk and systemui.apk are overwritten in case the U models files could have been different. But as said, with all these files and your build.prop the nav bar should show up....
So for the moment i do not see an immediate solution for that matter.
As said and afaik , the Mifavor 5.0 from my rom has this nav bar build in

xposed + nemesisrom + tweaks

Greetings,
Been using nemesisrom for a while now as a daily driver for my work phone. i use spen every day and love the features packed in this rom.
one thing i cant figure out is how to make the quicksettings tiles . LONG PRESS take you to respective section. "eg, hold WIFI" should take me to CONNECTIONS section / wifi" but it just brings up TILE editor.
another thing is i have now got primekernel 6.4.1 running (finally a working kernel on U variant with FIOPS shed. . ) this with a few tweaks to the interactive kernel. this thing is smooth as butter. (not sure about using zswaps yet)
anyway. one thing is i cant get xposed module to install. when i do i get SAMSUNG animation boot loop. tried a few diff .23 versions. am i missing something here. never was this big of a problem.
everytime i dont get it right i have to restore backup and its a 12g backup lol dont mind but its a PITA ..
any help appreciated.
*EDIT thinking of going back to DREAMUX but will check once i have exhausted possibilities with xposed/quicksetting tiles issue.
R0B3RTF1SH3R said:
Greetings,
Been using nemesisrom for a while now as a daily driver for my work phone. i use spen every day and love the features packed in this rom.
one thing i cant figure out is how to make the quicksettings tiles . LONG PRESS take you to respective section. "eg, hold WIFI" should take me to CONNECTIONS section / wifi" but it just brings up TILE editor.
another thing is i have now got primekernel 6.4.1 running (finally a working kernel on U variant with FIOPS shed. . ) this with a few tweaks to the interactive kernel. this thing is smooth as butter. (not sure about using zswaps yet)
anyway. one thing is i cant get xposed module to install. when i do i get SAMSUNG animation boot loop. tried a few diff .23 versions. am i missing something here. never was this big of a problem.
everytime i dont get it right i have to restore backup and its a 12g backup lol dont mind but its a PITA ..
any help appreciated.
*EDIT thinking of going back to DREAMUX but will check once i have exhausted possibilities with xposed/quicksetting tiles issue.
Click to expand...
Click to collapse
Tap on the text below the toggle. Forexample if u want to go to wifi settings just tap on the text blow the toggle i.e wifi text and tap on more networks. As for xposed use the custom wanam xposed framework thats meant to be used with touchwiz.

Categories

Resources