I was wondering if anyone could direct me to a site or page that sells parts for the ppc or xv6700. I have one, and I need to replace the scroll button on the front. That toggle thing on the front no longer clicks in. It goes left right, up and down but no longer clicks in.
just wondering if anyone knew where I could get a replacement other than buying a phone with a broken LCD off ebay or something.
thanks
Unfortunately that's the only thing I know of. But I also haven't looked.
parts for the 6700
i have parts for it if you want
My Glass is broken and the Display won't turn on anymore. The three touch buttons are still working.
Anyone knows a place around hannover, germany to get it good and mostly cheap repaired
OK guys looking for community experience. My defy took a tumble and cracked the screen, the only thing holding the glass was a screen protector. I bought a screen from eBay and replaced it myself. All went well till I started getting complaints that callers to me just hear themselves back, now the complaints started first call after replacement screen and with every call since. Anyone got any ideas what might be wrong?
The only logical reason i can think for this is that somehow you managed to put something out of place when you assembly the phone back... did you try to disassemble and try again?
Sorry that a don't have technical skills to give a proper answer, but that looks logical!
Good luck!
It might be echo cancellation mic, maybe contacts aren't set properly on the board. Try to call with headset, it should be no echo.
When i'm holdnig my phone on my ear with my shoulder people are telling me that they hear themselves...didn't investigated that to find culprit, but it is surely because echo cancellation mic.
P.S. And don't call me Shirley
Hello,
I have exactly the same problem. This was my second replacement. The first time i just replaced the glass digitizer leaving my old cover along with the original buzzer. No problems there. The second time though i decided to order the whole thing all together (cover, digitizer, buzzer) in order to same myself the trouble of unsticking the glass and removing all that adhesive glue.
Unfortunately since my second replacement every time i make a call, the person i 'm calling complains about echo and hearing himself. I 'll try to replace the buzzer with the older original one i have and i hope everything turns out good.
Do you have any tips for me, have you solved your problem @rydroid?
any resolution
Hi, did anyone get a resolution to this problem? I have also replaced teh entire front cover and digitizer and am noww getting the same problem. I have double checked everything is installed properly which it seems to be. i think that maybe the noise cancellation mic is being pushed too hard onto the back cover or something.
Anyoen get it sorted?
Cheers
Chris
Guys,
Here comes the solution for my particular echo problem:
I got the same trouble with my girlfriend's phone. Few days ago I replaced the digitizer and since then when I was calling her phone I heard my own voice in my phone back with a nice echo effect. I took the phone apart again to separate the voice of the speaker from the microphone somehow and in the meantime I accidentally lost one of the yellow rubber rings. It fall down to the floor. When I was looking for it on the floor I just found it and I also found another yellow part that I was most probably lost few days ago at the first round. When I put back all the yellow parts and tested the phone again this time the problem just gone. So the solution for me was putting back the yellow part that is located around the bottom of the phone that seems to be isolating the voice that is coming from the speaker. This part is only visible if you take the phone apart in a way the only the LCD and the screen is together in your hand. The mentioned yellow rubber can be seen on this picture (which I just picked by google-ing some random picture): LINK. It is the one seen on the part that is on the bottom left corner, under the LCD, on the left side.
I hope this helps other to resolve the echo issue.
Cheers,
Adam
end of my woes.
I had the same thing as adam in the end. its the little orange silicon bit that shields the microphone. it fits into the fornt cover near the microphone hole. I accidentally threw it away with the old cover and then had the problem. I had to buy a complete new casing in the edn but it is working fine now.
Chris
Hello,
I had the same echo issue.
I have to thank you very much Adam, because I also lost mic seal when I changed touch screen. And I had a big luck, because I found it on the floor after 1 week!
Once again thank you
I am happy to read that it helped you, Hark33. That was the exact reason why I wrote it down. :good:
Cheers,
Adam
hi guys
same problem here, i have a second hand defy plus (maybe previous owner replaced the screen and forget the yellow rings),
so where i can buy this yellow rongs??
really thank you
Hello,
same here, thanks very much Adam!!! :good:
Hello!
My problem is that my mic doesnt work at all witch back cover on, when I tack the back cover is off it works perfectly. I havent dropped it this happend randomly.
But what is the issue? Why does the mic work when I got my back cover off?
Speaker mic works both when cover is on and off.
Please help!
Thank you
I dropped mine one time and had to replace the mic. these are very sensitive. Make sure the cover is not pushing it or messing with it
gypsy214 said:
I dropped mine one time and had to replace the mic. these are very sensitive. Make sure the cover is not pushing it or messing with it
Click to expand...
Click to collapse
I thought it was due to a drop too, but I cannot remember if I ever dropped it. However I returned it to the store and it was sent for repair. Do you think they can say it was my fault somehow? I bought it last november and it looks brand new, no scratches.
Thank you for your respeonse
Hello all. Recently, my wife's phone was experiencing rapid ghost touches. I called customer support and since the phone was out of warranty, they offered to trade in for a refurbished one for $109. I didn't want to do that so I bought a new digitizer from ebay for about half that price.
I received the new digitizer and replaced it following some guide online. I placed it back together to test it out - only put a few screws back in. The new digitizer fixed the ghost touches issue and everything was working well.
However, I didn't finish transferring some rubber pieces from the old frame (I think they're for the front speakers. I also didn't transfer the grills for the front speakers. So I took the phone apart, transferred those rubber pieces and then attempted to transfer the grills. However, they weren't going in their slots very easily and I was attempting to press the bottom one in with some force. I didn't notice anything out of the ordinary, but now the screen just doesn't display anything. The phone is on and the touchscreen seems to work.
I can do the double twist to get to the camera and take a picture with the volume button. However, the screen is completely black. Also, if I call the phone number, the phone starts ringing, so I believe the phone still runs and the touchscreen is still ok. However, it doesn't display a single thing.
So I re-seated all of the connectors involved with the repair (especially the LCD and digitizer connectors), but that didn't work. After that, I switched back to the old digitizer I just replaced just to make sure I didn't break the new one. It still isn't displaying.
Is anyone familiar with this issue and what I can do to fix it? Thank you
*I asked for assistance in reddit and lenova forums so far, but that hasn't proved fruitful