My Problem=
-Don't have custom recovery like twrp & cwm but have stock Recovery (it's useless.. I can't flash any update or rom)
-Rsd lite won't detect my defy (in boot loader)
-cannot install 2nd Init cuz infinite boot loop.
-went connect USB to pc, only cd driver show up in My Pc (Windows 8 32bit) and SD card not showing up. And of course
I have properly phone driver
Please help me... about a week I was looking for solutions.
Sorry for my English...
Related
Hello.
Not knowing what was causing problems, introduced a GEN1 ROM (Orange-UK) in my Blade ZTE (Telstra, Spain) with GEN2.
All well until I restart the phone.
Now continuously stays in the green logo boot Android.
It goes into recovery mode.
Connected by USB to the PC, but it takes to detect evil or detect it fails.
I've tried everything but can not get beyond work on (in the way it is) and not exceeding android green logo.
I need someone to lend a hand if you really know how.
Thank you.
Apologize for my English, Spanish'm using the google translator.
There is 2 reasons I can think of why it would get in this situation :
1. Dirty battery contacts (Happened to me very recently same symptoms as you have).
2. Gen1 rom on gen2 layout
2 easy ways to sort this :
image.bin (onto root of sdcard) and then menu + vol up + power)
or
running through windows flasher (first install stock recovery with clockworkmod and then boot into ftm mode).
http://box.h-3.org.uk/restore_stock_recovery.zip
or
ftp://box.h-3.org.uk/restore_stock_recovery.zip
Then download this - boot to FTM mode (same as used to load clockworkmod)
http://www.mediafire.com/?az96nlfrhhkb3on then run through the flasher.
This will end up with stock recovery and clockworkmod installed to /boot
(And hopefully your nvitems fixed which may well be the problem).
So proceed to install clockworkmod back to recovery
(something like)
adb reboot bootloader
fastboot flash recovery recoveryblah-5.1.0.img
fastboot reboot
adb reboot recovery (Getting into the new recovery with the buttons caused more hassle than its worth).
Install a rom (Now you have a better partition layout also and fastboot enabled).
Feel to miss out steps if you want. (Credit to hedgepigdaniel on another site for making windows the flasher pack / cpg for hacking so we could reenable fastboot).
Hi all,
first of all - sorry for my bad english.
I have the following problem with my nexus 7:
the device is rooted and has the clockworkmod recovery installed, the Android version is 4.1.1.
My Computer stopped to recognize the tablet when i connected it, and it is not listed in the device manager anymore.
I tried different USB-ports, cables and even computers with no result, but OTG with Stickmount still worked.
So i tried to install a rom via clockwork mod, but the installation process aborded.
When rebooting the device stucked at the white google logo and still does.
I can go into fastboot mode but if i choose "recovery" i will get back to the google logo forever again.
I found this thread (http://forum.xda-developers.com/showthread.php?t=1773431&highlight=no+usb&page=2)
with instructions to flash the factory image via fastboot mode.
Now the fastboot command from the console shows also no result.
But i can´t install the driver, because my tablet isn´t recognized by my pc in any way evon not listed in the device manager.
Any Ideas?
I tried rooting my nexus 7 (16GB 2013) with 4.3 installed on it today and I ran into an unusual error - It is stuck at the X logo after booting.
I have successfully unlocked my bootloader and installed a custom recovery - CWM v.6.0.3.7. I can access the bootloader and get into recovery mode fine. My nexus 7 is also showing up as an Android device only while in the bootloader - When I get into recovery mode it shows up as a portable device with a yellow exclamation mark next to it on my computer's device manager.
The problem is I'm not sure how to transfer any files to it in order to install any roms/fixes/etc. I can't boot and when I connect my tablet to my computer, while in recovery mode, it will not show up as a media device - So I'm not sure how to transfer any files to it. Also whenever I try performing a backup on CWM it gives me an error saying: "can't mount backup path." For some reason CWM can't mount my sd card, which I don't understand either. I'm hoping this is an easy fix, maybe I forgot a step but I don't want to try anything else yet without gathering more information about my problem. All I've done so far is installed the Android usb drivers on my computer, enabled USB debugging, Unlocked the Bootloader, and then Installed Clockwork Recovery Mod v 6.0.3.7. After the last step I am unable to boot or transfer files to the sd card.
Any help or suggestions are welcome and appreciated. Thank You!
This problem started about 6 months ago, every time i try to put the stock android 2.3.5 ,in my way to installing ics and above I end up with an unsable device , sometimes it boots fine but most times its just stays at the logo screen playing the boot animation at about 1 fps and keeps closing the screen and opens again (not restarting).Many of the times that it finally Booted i tried to do the first steps on rooting it and installing cwm but in the next reboot i will still have the problem and i will not be able to boot again,i must to do a wipe from the recovery menu .
So my question are
does anyone knows what the problem is?
can I install ics and above without going first to stock 2.3.5
can I install cwm without rooting the device and without even opening it? (i tried to connect it to adb and push files but ofc i don't have the permissions ;( )
*I tried every stock 2.3 on this list
*Every stock 2.2 rom works fine
Hi,I had the same problem
First boot - OK
Reboot
Bootloops with blinking and lagging screen.
---!This tutorial is for standart U8800 only!---
You must intall official 2.3.5 BETA 1.0 and root it with superoneclick after first boot.
In beta version of 2.3.5 is unlocked bootloader = you can put recovery img in phone, when you are in bootloader and have usb connected to pc.
after it go to pink screen, connect phone to the pc and put recovery.img in image folder.
disconnect it, pull the battery out. Give it back and start the phone with holding vol + and power button. and boot into CWM
go to mount and storage => connect phone via USB cable to the pc and select => mount usb storage
Now you can see micro sd card in your pc and copy zip. with rom to microsd card and install any ROM you want.
Sorry for my bad English.
Use CWM 5.5.0.4 - search for it in this forum.
Here you can download 2.3.5 with unlocked Bootloader
https://mega.co.nz/#!S8JWmBSa!Le4WADz8074GjSO-j8prVCQAYk9qfbWZXfrGT-7nK5w
Hello, i have a huge problem at least for me in mine Huawei U8800.
I have installed a Wrong version of CWM-Based Recovery v6.0.4.6, and accidently erased all mine SD card (no recovery IMG).
My Phone doesn´t boot on android any more, it still boots on the CWM, so i tried everything to reinstall at least the Android version 2.3.5 and it gives me a error that that is installation aborted. I tried to Connect on USB and the PC doesn´t recognize the phone. Well i wanted to remove CWM and i can not access the phone Via USB. How can i get my phone to install and recognize the packages..
Sorry my english.