The shortcut of "Board Support Pack". These are basicly the device-specific drivers for Microsoft Platform Builder, and they are required if, usually an OEM, wants to build a Windows CE-based operating system for a device.
Here's a head's up message. I did a search before posting, though found nothing mentioned on the forum, therefore I'm continuing..
Resource Page Description
DiskPrep can prepare any hard disk that can be attached to your development PC so that it can boot your X86-based (Embedded) Windows CE OS Design.
USB disks (including disk "keys"), Compact Flash Cards, and SD cards all work if your system bios can boot from that type of media.
FAT16, FAT32, and exFAT all supported.
DOS is not used - the program prepares the bios loader on the disk and only uses that.
If you use Windows Vista or Windows 7, you can use VHD files for VirtualPC. This allows for rapid prototyping of a self-booting system!
Windows Embedded Blog;
Long link;
http://blogs.msdn.com/mikehall/archive/2010/03/27/windows-ce-powertoy-diskprep.aspx
Short link;
http://xrl.in/4xtd
Within this above links the extention VHD is mentioned, which means Virtual Hard Disk;
Virtual PC (Virtual Hard Disk) by Microsoft Corporation
Virtual PC allows you to maintain the compatibility of legacy and custom applications during migration to new operating systems and increases the efficiency of support, development, and training staffs. Connectix Virtual PC was taken over by Microsoft and is the basis for the Microsoft product.
Inform yourself more about Virtual PC here;
Long link;
http://www.microsoft.com/windows/virtual-pc/default.aspx
Short link;
http://xrl.in/4xte
:END
Have a nice read,
Senax
thx you!!!!!!!!
Does anyone have a direct link to this tool?
Hello,
Recently i bought a chinese navigator with Windows Embedded CE 6. The device specs are:
Platform=AT8X0
OEM=BSP Version: AIVCE6_NANO_Rel1.04.1.01
core=ARM1136JF-S
name=AT840
vend=SiRF
Im trying to install android from this thread: forum.xda-developers.com/showthread.php?t=619980
Now, when i run HaRET, it says: "haret is not running on 'system' mode. Major functionallity...", then haret opens and when i hit the run button it says: "Failed to lock 379 pages (code 6)".
This is the log file from haret:
===== HaRET 0.5.2 =====
Setting KMode to true.
Old KMode was 0
Finished initializing output
Loading dynamically bound functions
Function 'AllocPhysMem' in library 'coredll' at 40026BF8
Function 'FreePhysMem' in library 'coredll' at 40026C3C
Unable to load library 'gx'
Unable to load library 'gx'
Unable to load library 'gx'
Unable to load library 'gx'
Function 'LoadLibraryExW' in library 'coredll' at 4003AF48
Function 'NLedSetDevice' in library 'coredll' at 4005168C
Function 'GetSystemPowerStatusEx2' in library 'coredll' at 4002C894
Function 'SleepTillTick' in library 'coredll' at 40026C68
Function 'CreateToolhelp32Snapshot' in library 'toolhelp' at 4012107C
Function 'CloseToolhelp32Snapshot' in library 'toolhelp' at 401210CC
Function 'Process32First' in library 'toolhelp' at 40121190
Function 'Process32Next' in library 'toolhelp' at 40121208
Function 'Module32First' in library 'toolhelp' at 401213EC
Function 'Module32Next' in library 'toolhelp' at 40121470
Function 'Heap32ListFirst' in library 'toolhelp' at 4012155C
Function 'Heap32ListNext' in library 'toolhelp' at 40121680
Function 'Heap32First' in library 'toolhelp' at 4012178C
Function 'Heap32Next' in library 'toolhelp' at 401218FC
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Detecting current machine
Trying to detect machine (Plat='AT8X0' OEM='BSP Version: AIVCE6_NANO_Rel1.04.1.01')
Wince reports processor: core=ARM1136JF-S name=AT840 cat= vend=SiRF
Looking at machine Alpine
Looking at machine Apache
Looking at machine AximX50
Looking at machine AximX5
Looking at machine Beetles
Looking at machine Blueangel
Looking at machine Himalaya
Looking at machine Magician
Looking at machine Universal
Looking at machine H1910
Looking at machine H1940
Looking at machine H2200
Looking at machine H3600b
Looking at machine H3700
Looking at machine H3800
Looking at machine H3900
Looking at machine H4000
Looking at machine H4300
Looking at machine H5000
Looking at machine H6340
Looking at machine HX2000
Looking at machine HX4700
Looking at machine Sable
Looking at machine Wizard
Looking at machine Hermes
Looking at machine Trinity
Looking at machine Athena
Looking at machine G500
Looking at machine Artemis
Looking at machine Herald
Looking at machine Prophet
Looking at machine RX3000
Looking at machine Treo700wx
Looking at machine e310
Looking at machine e740
Looking at machine Acer_n30
Looking at machine Mio_P550
Looking at machine Kaiser
Looking at machine Loox5xx
Looking at machine Loox400
Looking at machine MioA701
Looking at machine Wallaby
Looking at machine Raphael
Looking at machine Jornada820
Looking at machine H3100
Looking at machine H3600a
Looking at machine Tornado
Looking at machine Libra
Looking at machine Generic Intel PXA27x
Looking at machine Generic Intel PXA
Looking at machine Generic Intel StrongArm
Looking at machine Generic TI OMAP
Looking at machine Generic TI OMAP15xx
Looking at machine Generic Samsung s3c24xx
Looking at machine Generic MSM7xxxA
Looking at machine Generic MSM7xxx
Looking at machine Generic Atlas
Looking at machine Generic ARM 920t
Looking at machine Generic ARM 926
Looking at machine Generic ARM v6
Looking at arch Generic Intel PXA27x
Exception on arch Generic Intel PXA27x detect
Looking at arch Generic Intel PXA
Exception on arch Generic Intel PXA detect
Looking at arch Generic Intel StrongArm
Looking at arch Generic TI OMAP
Looking at arch Generic TI OMAP15xx
Looking at arch Generic Samsung s3c24xx
Looking at arch Generic MSM7xxxA
Looking at arch Generic MSM7xxx
Looking at arch Generic Atlas
Looking at arch Generic ARM 920t
Exception on arch Generic ARM 920t detect
Looking at arch Generic ARM 926
Exception on arch Generic ARM 926 detect
Looking at arch Generic ARM v6
Exception on arch Generic ARM v6 detect
Detecting ram size
WinCE reports memory size 67108864 (phys=51556352 store=2269184)
Mapping mmu table
Exception on mmu table lookup
Unable to map in mmu table! Many functions will not work.
Build L1 reverse map
Found 0 uncached and 0 cached L1 mappings (ignored 0).
Not registering command IGPIO
Not registering command WG|PIO
Not registering command GPLR
Not registering command GPDR
Not registering command GAFR
Not registering command GPIO
Not registering command GPIOST
Registering command LOADLIBRARYEX
Registering command NLEDSET
Not registering command TRACE
Not registering command TRACEMASK
Not registering command TRACE2
Not registering command TRACETYPE
Not registering command TRACE2TYPE
Not registering command TRACEFORWATCH
Not registering command INSN
Not registering command INSNREENABLE
Not registering command INSNREG1
Not registering command INSNREG2
Not registering command INSN2
Not registering command INSN2REENABLE
Not registering command INSN2REG1
Not registering command INSN2REG2
Registering command KILL
Registering command PS
Registering command LSMOD
Registering command ADDR2MOD
Not registering command AC97
Not registering command ATIDBG
Initializing for machine 'Default'
Haret is not running in 'system' mode. Major functionality will not be present.
Exception on cpu id detect
Welcome, this is HaRET 0.5.2 running on WindowsCE v6.0
Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF
Detected machine Default/generic (Plat='AT8X0' OEM='BSP Version: AIVCE6_NANO_Rel1.04.1.01')
CPU is ? running in user mode
Enter 'HELP' for a short command summary.
Running WSAStartup
Starting gui
In initdialog
Found machine Default
executing startup.txt
HaRET(1)# set RAMSIZE 0x08000000
HaRET(2)# set ramaddr 0x10000000
HaRET(3)# set MTYPE 1667
HaRET(26)# set cmdline "ppp.nostart=0 mddi.width=240 mddi.height=320 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 no_console_suspend"
HaRET(27)# boot
boot KERNEL=zimage INITRD=
Opening file zimage
boot params: RAMADDR=10000000 RAMSIZE=08000000 MTYPE=1667 CMDLINE='ppp.nostart=0 mddi.width=240 mddi.height=320 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 no_console_suspend'
Boot FB feedback: 1
Failed to lock 379 pages (code 6)
Calling WSACleanup
Shutting down
My questions:
1) is there a form to load android from Windows Embedded CE 6? If not,
2) how can i replace windows embedded CE 6 with android?
As far as I know, ROMs are device-specific, so You just can't flash a random device with random ROM. You need a ROM that's specifically cooked for that specific device.
That being said, I am not familiar with Haret. And I could be wrong
mpedrozoduran said:
Hello,
Recently i bought a chinese navigator with Windows Embedded CE 6. The device specs are:
Platform=AT8X0
OEM=BSP Version: AIVCE6_NANO_Rel1.04.1.01
core=ARM1136JF-S
name=AT840
vend=SiRF
Im trying to install android from this thread: forum.xda-developers.com/showthread.php?t=619980
Now, when i run HaRET, it says: "haret is not running on 'system' mode. Major functionallity...", then haret opens and when i hit the run button it says: "Failed to lock 379 pages (code 6)".
This is the log file from haret:
===== HaRET 0.5.2 =====
Setting KMode to true.
Old KMode was 0
Finished initializing output
Loading dynamically bound functions
Function 'AllocPhysMem' in library 'coredll' at 40026BF8
Function 'FreePhysMem' in library 'coredll' at 40026C3C
Unable to load library 'gx'
Unable to load library 'gx'
Unable to load library 'gx'
Unable to load library 'gx'
Function 'LoadLibraryExW' in library 'coredll' at 4003AF48
Function 'NLedSetDevice' in library 'coredll' at 4005168C
Function 'GetSystemPowerStatusEx2' in library 'coredll' at 4002C894
Function 'SleepTillTick' in library 'coredll' at 40026C68
Function 'CreateToolhelp32Snapshot' in library 'toolhelp' at 4012107C
Function 'CloseToolhelp32Snapshot' in library 'toolhelp' at 401210CC
Function 'Process32First' in library 'toolhelp' at 40121190
Function 'Process32Next' in library 'toolhelp' at 40121208
Function 'Module32First' in library 'toolhelp' at 401213EC
Function 'Module32Next' in library 'toolhelp' at 40121470
Function 'Heap32ListFirst' in library 'toolhelp' at 4012155C
Function 'Heap32ListNext' in library 'toolhelp' at 40121680
Function 'Heap32First' in library 'toolhelp' at 4012178C
Function 'Heap32Next' in library 'toolhelp' at 401218FC
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Detecting current machine
Trying to detect machine (Plat='AT8X0' OEM='BSP Version: AIVCE6_NANO_Rel1.04.1.01')
Wince reports processor: core=ARM1136JF-S name=AT840 cat= vend=SiRF
Looking at machine Alpine
Looking at machine Apache
Looking at machine AximX50
Looking at machine AximX5
Looking at machine Beetles
Looking at machine Blueangel
Looking at machine Himalaya
Looking at machine Magician
Looking at machine Universal
Looking at machine H1910
Looking at machine H1940
Looking at machine H2200
Looking at machine H3600b
Looking at machine H3700
Looking at machine H3800
Looking at machine H3900
Looking at machine H4000
Looking at machine H4300
Looking at machine H5000
Looking at machine H6340
Looking at machine HX2000
Looking at machine HX4700
Looking at machine Sable
Looking at machine Wizard
Looking at machine Hermes
Looking at machine Trinity
Looking at machine Athena
Looking at machine G500
Looking at machine Artemis
Looking at machine Herald
Looking at machine Prophet
Looking at machine RX3000
Looking at machine Treo700wx
Looking at machine e310
Looking at machine e740
Looking at machine Acer_n30
Looking at machine Mio_P550
Looking at machine Kaiser
Looking at machine Loox5xx
Looking at machine Loox400
Looking at machine MioA701
Looking at machine Wallaby
Looking at machine Raphael
Looking at machine Jornada820
Looking at machine H3100
Looking at machine H3600a
Looking at machine Tornado
Looking at machine Libra
Looking at machine Generic Intel PXA27x
Looking at machine Generic Intel PXA
Looking at machine Generic Intel StrongArm
Looking at machine Generic TI OMAP
Looking at machine Generic TI OMAP15xx
Looking at machine Generic Samsung s3c24xx
Looking at machine Generic MSM7xxxA
Looking at machine Generic MSM7xxx
Looking at machine Generic Atlas
Looking at machine Generic ARM 920t
Looking at machine Generic ARM 926
Looking at machine Generic ARM v6
Looking at arch Generic Intel PXA27x
Exception on arch Generic Intel PXA27x detect
Looking at arch Generic Intel PXA
Exception on arch Generic Intel PXA detect
Looking at arch Generic Intel StrongArm
Looking at arch Generic TI OMAP
Looking at arch Generic TI OMAP15xx
Looking at arch Generic Samsung s3c24xx
Looking at arch Generic MSM7xxxA
Looking at arch Generic MSM7xxx
Looking at arch Generic Atlas
Looking at arch Generic ARM 920t
Exception on arch Generic ARM 920t detect
Looking at arch Generic ARM 926
Exception on arch Generic ARM 926 detect
Looking at arch Generic ARM v6
Exception on arch Generic ARM v6 detect
Detecting ram size
WinCE reports memory size 67108864 (phys=51556352 store=2269184)
Mapping mmu table
Exception on mmu table lookup
Unable to map in mmu table! Many functions will not work.
Build L1 reverse map
Found 0 uncached and 0 cached L1 mappings (ignored 0).
Not registering command IGPIO
Not registering command WG|PIO
Not registering command GPLR
Not registering command GPDR
Not registering command GAFR
Not registering command GPIO
Not registering command GPIOST
Registering command LOADLIBRARYEX
Registering command NLEDSET
Not registering command TRACE
Not registering command TRACEMASK
Not registering command TRACE2
Not registering command TRACETYPE
Not registering command TRACE2TYPE
Not registering command TRACEFORWATCH
Not registering command INSN
Not registering command INSNREENABLE
Not registering command INSNREG1
Not registering command INSNREG2
Not registering command INSN2
Not registering command INSN2REENABLE
Not registering command INSN2REG1
Not registering command INSN2REG2
Registering command KILL
Registering command PS
Registering command LSMOD
Registering command ADDR2MOD
Not registering command AC97
Not registering command ATIDBG
Initializing for machine 'Default'
Haret is not running in 'system' mode. Major functionality will not be present.
Exception on cpu id detect
Welcome, this is HaRET 0.5.2 running on WindowsCE v6.0
Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF
Detected machine Default/generic (Plat='AT8X0' OEM='BSP Version: AIVCE6_NANO_Rel1.04.1.01')
CPU is ? running in user mode
Enter 'HELP' for a short command summary.
Running WSAStartup
Starting gui
In initdialog
Found machine Default
executing startup.txt
HaRET(1)# set RAMSIZE 0x08000000
HaRET(2)# set ramaddr 0x10000000
HaRET(3)# set MTYPE 1667
HaRET(26)# set cmdline "ppp.nostart=0 mddi.width=240 mddi.height=320 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 no_console_suspend"
HaRET(27)# boot
boot KERNEL=zimage INITRD=
Opening file zimage
boot params: RAMADDR=10000000 RAMSIZE=08000000 MTYPE=1667 CMDLINE='ppp.nostart=0 mddi.width=240 mddi.height=320 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 no_console_suspend'
Boot FB feedback: 1
Failed to lock 379 pages (code 6)
Calling WSACleanup
Shutting down
My questions:
1) is there a form to load android from Windows Embedded CE 6? If not,
2) how can i replace windows embedded CE 6 with android?
Click to expand...
Click to collapse
BUMP... a year later, there has to be some more info. On this? I'm looking to do the exact same thing. How about running Android from the SD? Any additional info, it links will help. Thanks
i also ahve a 4` Chinese YF intl GPS ...
can some one port an android build into that ...
very eager to delete wince 5
hello , i`m looking to do the same but i didnt find out yet ?
Bump again
These Chinese GPS units are everywhere and they are cheap as hell. Would buy one today if we could get Andriod running on them. The WinCE Roms are readily available on GPSPassion Forum and
austech.info/gps/40751-chinese-gps-firmware-thread.html
They aren't the experts on the Windows platform that those on this site are. Seems like it should be simple for those that know?
I'm looking for the solution too. I think that topic will grow. I will try today some tricks on my china device, and try to report effects.
Hello,
Any thoughts on this?
I too would like to see Android on my "generic" Chinese HU
sergani said:
Hello,
Any thoughts on this?
I too would like to see Android on my "generic" Chinese HU
Click to expand...
Click to collapse
Can't count how many threads started to this topic here at XDA. If you'ld have read them all carefully you'ld have noticed that it's not possible to replace WinCE by Android. All you could try is to get a dual-boot solution up and running. And even this I failed to do so, because couldn't find an Android version that matches the techn. specs of an WinCE ( navigation ) device.
True, Thanks
Sent from my GT-N7100 using Tapatalk
Hate to necro-bump, but I bought one of these chinese gps units.
There is an android icon which boots what I can only guess is an android emulator within WinCE 6.
This gives full android functionality running in parallel with the wince interface. In fact, the units GPS runs on the android emulated part (iGo)
I can extract files somehow and post for you guys if someone tells me how (know nothing about wince)
there should be some way of putting windows explorer for wince on your sd card and launching it. From there perhaps you could copy the android launch app onto the sd card?
OP News: (27.4.2011)
Added Developer Files in case someone acctualy wants to take a look at the Source Code from mamaich. See Post Nr. 5
Older News:
There is still alot of Information yet to be Organized and published but feel free to submit Links, Drivers, Addons, Plugins, or anything else you found and tested. Just always remember never to publish any licensed stuff.
Some Cool stuff some XDA Members have already tested: Photoshop 4.0, 3D Max v3.1, ZBrush2, SiSoft Sandra 2000, OpenOffice, Virtual Joystick, etc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rules & Reminders:
- Always respect XDA-Developers.com Forum Rules!
- Please try to stay on Topic as much as possible.
- Do not post any Copyrighted Material without explicit and written permission of the copyright owner. If you own a legitimate License this Thread will show you everything you need to know to recycle that license to create your own Windows Mobile Device Images.
- Hopefully this Thread will stay impartial to any Device but that said having a 1Ghz Snapdragon does not hurt.
- There is allot of Information to be collected, verified, and compacted. Any help is greatly appreciated and rewarded by special mentionings throught this Thread. PM Swiss420 with suggestions, feedback, ideas, or basically any material that you think could be usefull for the thread.
- Use the Thanks Button instead of posting "thanks" and please don’t ask why we are rolling this up again. We know its old news but I am sure we can provide new insights and focus the Information. No! Networking has not been achieved yet. But as we see it, it is a Question of what was first the Chicken or the Egg.
[QEMU Applications]
QEMU v0.91 [/Storage Card/QEMU] --> Download
Qemu Manager v7.0 (April 2010) with Qemu 0.11.1 and KQEMU Support -> Download
Qemu Manager v6.0 (April 2009) with Qemu 0.10.2 and KQEMU Support -> Download
Qemu Manager v5.0 (Feb 2008) with Qemu 0.9.0/0.9.1 and KQEMU Support -> Download
Qemu Manager Version 4.0 (Feb 2007) With QEMU 0.9.0 and KQEMU support -> Download
3D_Toolbar_V1.qtb
3D_Toolbar_V2.qtb
3D_Toolbar_V3.qtb
3ddesktop.qtb
boot_Toolbar.qtb
BOOT3D.qtb
FULL.qtb
full_keyboard.qtb
toolbar-boot.qtb
toolbar-Desktop.qtb
toolbar-full.qtb
toolbar-fullO.qtb
toolbar-her.qtb
toolbar-min.qtb
Attached is a preliminary Version of QEMU Extended and preped for Windows 98SE by aSiD1712 and contributing work by TruckyBN. See Original Thread -->
[QEMU Plugins]
int33mouse.dll [missing Description]
int21hk.dll [missing Description]
heroes2.dll [missing Description]
FMOD.DLL [missing Description]
LIBUSB0.DLL [missing Description]
SDL.DLL [missing Description]
[QEMU Settings]
[Screenshot QEMU Manager running Windows 98SE]
Code:
CMDLINE.TXT
-tb-size
8
-emul
\Storage Card\QEMU\emul\WinXX
[QEMU Information]
QEMU is a generic and open source machine emulator and virtualizer.
When used as a machine emulator, QEMU can run OSes and programs made for one machine (e.g. an ARM board) on a different machine (e.g. your own PC). Or viceversa. By using dynamic translation, it achieves very good performance.
In order for QEMU to run under Windows Mobile it was necessary to recompile the OpenSource Code. Mainly mamaich at pdaprime.com has taken on this task himself in 2004 and succesfully recompiled QEMU. Unfortunately in March 2010 Mamaich announced the following:
"I've stopped working on QEMU and HOMM 1-2 ports for WinMobile. Earlier I've published complete source code and a toolchain used to build QEMU, but links were lost after this forum have crashed. I'll look for them and reupload in a few days. Currently I'm attaching source code for launcher and all plugins. To build them you'll need Visual Studio 2008. To build QEMU you'll need cygwin, my GCC 3.3.3 port (a bit modified for QEMU), i'll upload them after I'll find them.
Edited:
Added toolbar editor with sources. To compile - use C++ Builder. Usage is similar to DosBox TB editor.
Edited:
Added compiler (arm-wince-pe-gcc.rar). Extract it to /usr/ directiory of CygWin installation and add /usr/local/arm-wince-pe/bin/ to the start of CygWin $path. This GCC is already preconfigured for QEMU, it contains all needed libs like SDL. Added qemu src (qemu-0.9.1.rar). It is already "./configure"d, just use "make" to build in CygWin environment. Normally QEMU.EXE file should not be modified at all. Everything is controllable from plugins."
March 2010 Mamaich (pdaprime.ru)
Click to expand...
Click to collapse
So were does that leaves us? First off we want to thank mamaich for the great work he has done and wish him all the best. We are putting this together in order to search for someone else with enough knowledge to recompile QEMU and add Network functionality if possible. Hopefully someone steps up to the plate and cracks this nut. He will be able to completly rely on our help in any way shape or form. We will post any Developer Information mamaich has provided at PDAPrime as soon as possible but we would like to check first with mamaich and or pdaprime. For now you can find the allot of the Information here
Original Developer Files from Mamaich (Ad Free xda-developers.ch Links):
arm_wince_pe_gcc.rar (Compiler)
GEN_Toolbar.rar ()
qemu_0.9.1.rar
ui_and_launcher.rar
Download here
This is only a quick overview. We will create Step by Step Instructions for you to follow eventually.
1. Create an Image - use the following command using the qemu-img.exe provided in the QEMU v0.91 [qemu-img create image.img 1000MB] (Creates a Unformated 1Gb Image)
2. Install OS using QEMU Manager for Windows. -> Download here
3. Copy QEMU to SD Card -> Download Example
4. Adjust CMDLINE.TXT, EMUL_CMDLINE.TXT, emul_ini.txt and plugins_ini.txt according to your specific OS and Environment
5. Add a Second Drive by creating a new Image and adding files with WinImage or create a ISO with Nero and load it as a CD Image in QEMU Manager.
6. For debugging and Errors please check the output in: QEMU_OUT.TXT [Error Log]
[QEMU Links]
XDA-Developers Links:
[QEMU on himalayas]
[Windows 95 on HD2]
Offsite Links:
http://en.wikipedia.org/wiki/QEMU [QEMU @ wikipedia.org]
http://wiki.qemu.org/ [QEMU Wiki]
http://www.davereyn.co.uk/ [Home of QEMU Manager]
http://forum.pdaprime.ru/index.php?showtopic=45356&st=240 [Original Thread from mamaich]
http://www.qemu.com/ [QEMU git repositories]
YouTube Videos:
Windows 95 on a HD2 [Swiss420]
Developer Links:
Bug in qemu 0.9.1 (and maybe later) + fix [mamaich @ QEMU Forum]
VBEMP x86 Project - Universal VESA/VBE Video Display Driver [Bearwindows and AnaPa Corporation]
[QEMU Drivers]
[Verified Drivers: These Drivers have been tested and as working classified]
Drivers for Cirrus GD-5446 video adapter
"None available"
Drivers for Realtek 8029AS network adapter (for other OSes try NE2000 compatible driver)
"None available"
Drivers for Realtek 8139 network adapter
"None available"
Drivers for Sound Blaster 16 adapter"
None available"
[Caution: These Drivers have not been tested yet: Use and try at your own Risk - Leave Feedback with exact file name]
Drivers for Cirrus GD-5446 video adapter
DOS Drivers
OS/2 Drivers
Windows 3.1, Windows NT and Windows 9x Drivers
Drivers for X.Org and X11 are inside "cirrus" module.
QNX includes the driver.
Drivers for Realtek 8029AS network adapter (for other OSes try NE2000 compatible driver)
BeOS R4 and R4.5 instructions (Use NE2000 PCI)
BeOS R5 instructions (Use NE2000 PCI)
DOS driver for NDIS2
LANtastic 4 driver
LANtastic 5 driver
Windows NT 3.51 driver
Windows NT 4.0 driver
Novell NetWare Client32 driver
Novell NetWare Client for DOS ODI driver
Novell NetWare Client for OS/2 ODI driver
Novell NetWare Server driver
OS/2 driver for NDIS2
SCO UNIX driver
UNIXWare driver
Windows for Workgroups driver (3.1 and 3.11)
Windows 95 driver
Windows 98 driver
Windows 2000 driver
Windows XP includes driver
Windows Vista stopped support
Linux driver is in ne2k-pci.c
Drivers for Realtek 8139 network adapter
BeOS R4 and R4.5 driver
BeOS R5 driver
DOS driver for NDIS2
FreeBSD driver (for versions that do not include it in kernel repository)
JavaOS driver
MacOS 8.5, 8.6, 9.0 and 9.1 driver
Novell NetWare Client32 driver
Novell NetWare Client for DOS ODI driver
Novell NetWare Client for OS/2 ODI driver
Novell NetWare Server (from 3.12 onward)
SCO UNIX driver
Slackware Linux 8 driver
Solaris 7, 8, 9, and 10 driver
UNIXWare driver
VXWorks for x86 driver
Windows NT 3.51 driver
Windows NT 4.0 driver
Embedded Windows NT 4.0 driver
Windows for Workgroups driver (3.1 and 3.11)
Windows 95 driver
Windows 98 driver
Windows 98 Second Edition, Windows Me and Windows 2000 driver
Windows XP and Windows XP Professional x64 Edition driver
Windows CE 2.0 for x86 driver
Windows CE 3.0 for x86 driver
Mac OS X 10.0.4 and Darwin/PPC 1.3.1 driver
Mac OS X 10.1, Darwin/PPC 1.4.1 and Darwin/PPC 5 driver
Mac OS X 10.2 and Darwin/PPC 6 driver
Linux driver is in 8139too.c or 8139cp.c
Windows Vista, Windows 2003 and Windows CE.NET include drivers
Drivers for Sound Blaster 16 adapter
DOS driver
Windows NT 4.0 driver
Windows 95 and Windows 98 driver
OSS and ALSA have drivers.
Windows 98 SE, Windows Me, Windows 2000, Windows XP and Windows 2003 include drivers.
Windows Vista dropped support.
[DOS & Windows 3.1 for QEMU]
Reserved for Windows 3.1
[Windows 95 for QEMU]
Windows 95 osr2
Graphics: Cirrus Logic 5446 PCI v1.41
Network: [Not yet Available]
Sound: Creative Labs Sound Blaster 16 or AWE-32
Hard disk controllers: Intel 82371SB PCI Bus Master IDE Controller
Monitor: (Unknown)
Mouse: (Unknown)
Ports (COM & LPT): COM1 / LPT1
System Devices: (Unknown)
Videos:
Windows 95 on HD2 [by Swiss420]
Screenshots: 1
[PDAPrime Thread]
Mamaich [pdaprime], aSiD1712 [xda-developers], TruckyBN [xda-developers]
[Windows 98 for QEMU]
Reserved for Windows 98 Ori.
[QEMU for Windows 98SE]
Windows 98 Second Edition
Videos:
"None yet"
Screenshots: 1 2
Windows NT 4.0 for QEMU
Reserved for Windows NT 4.0
[Windows ME for QEMU]
Reserved for Windows ME
[Windows 2000 for QEMU]
Reserved for Windows 2000
[Windows XP for QEMU]
Reserved for Windows XP
[Windows 7 for QEMU]
Reserved for Windows 7
Linux Builds
There are many Open Source Operating Systems that run great under QEMU for Windows Mobile. Here you will find a few that have been reported as Working.
--------------------
Puppy Linux / Linux
Puppy Linux is a special build of Linux meant to make computing easy and fast
--------------------
Icaros Desktop light / pre-configured AROS Desktop Environment / AmigaOS 3.1 / Fast and Stable
Icaros Desktop is a pre-configured AROS desktop environment for the PC platform, distributed on a bootable live media. The AROS Research Operating System is a open source lightweight, efficient and flexible desktop operating system, aiming at being compatible with AmigaOS 3.1 at the API level, while improving on it in many areas. [Supports Amiga Forever and AMIGA Games - Untested - Please Report findings]
First
Great work mate!
I think this will be going to an big Thread!
Greetz Tokl
Looks like a very interesting thread I downloaded the QEMU.7z file and transfered it to my phone, but without a base OS, I doubt it'll work. I think I have a 95 disk laying around here somewhere. How would I go about emulating it? Those posts only have images of download links, no actual links
BarrettBear said:
Looks like a very interesting thread I downloaded the QEMU.7z file and transfered it to my phone, but without a base OS, I doubt it'll work. I think I have a 95 disk laying around here somewhere. How would I go about emulating it? Those posts only have images of download links, no actual links
Click to expand...
Click to collapse
Yes you are right the acctual instructions are not yet published. But to get you jumpstarted just download QEMU Manager for Windows here use that to install your Windows 95 or 98 and transfer the image to the SDCard. Will send you a IM with some more information. Feel free to ask if you get stuck same goes for everyone else.
Since two days, I get this error :
Code:
java.lang.UnsatisfiedLinkError: Couldn't load MyCPPProject from loader dalvik.system.PathClassLoader[dexPath=/system/framework/com.google.android.maps.jar:/data/app/com.mypackage.myApp-3.apk,libraryPath=/data/app-lib/com.mypackage.myApp-3]: findLibrary returned null
I'd like to compile a project c ++ natively in android application. The project compiles fine on another PC but not on mine. I tried to create a new workspace, install another eclipse and plenty others solutions but it still does not compile.
How can I fix it ? The android project generate myApp.apk but not myApp-3.apk. Why compiler try to load myApp-3.apk ?
Thanks