Ok, So I tried flashing Lightning Rom 2.0 using Philz Recovery. Installation went smoothly until the end where it failed to Lokify. I went ahead and installed the KK Baseband and attempted to boot. It was stuck in a bootloop. So I tried to boot back into recovery but being that I'm using the D801 model I had to flash Smiley's rom to remove recovery in order to avoid the "white lines" bug. So now I'm stuck with a rom that won't boot and no recovery. And when i try using LG Flash tool it says "Download Fail" " Device model is different". I know I'm using the correct files as I've used LG flash tool like 7-8 times on this phone. I think the rom failing to lokify changed the device model or something because even the bootloader looks different. (Before the interface was smooth, now the "No (exit) and Yes options are in boxes and turn grey when I highlight them. Someone please help me.
Related
Hello y'all. I tried installling another ROM on my phone (was using Cyanogen 7 SDSL) but I think I messed up somewhere (bricked my phone).
So I followed the steps in the sticky (Flashing on KDZ with battery and SIM out). With this, I managed to boot the stock ROM, yet no logo and boot animation shows up.
When trying to flash something else with fastboot (tried different ones), it eithers give a "too many links" error, or gets stuck on waiting on device (happens when I use the AIO toolkit). Also sometimes KDZ pops up an error too, then says finished, or gets stuck while flashing.
Also worth of note, I can't even boot Recovery (I flash it successfully on fastboot, it just doesn't boot on phone).
I searched through the entire forum, googled my problems and tried EVERYTHING, yet I'm still stuck. Anyone care to help? Sorry if it's confusing.
TL;DR
-Tried flashing another ROM, bricked phone.
-Un-bricked it by following the sticky, boot stock 2.1 (tried alot of files; euro+fast, V20a, V20b, out.kdz, France20V...)
-When booting the phone, no logo/animation shows
-When flashing recovery, it doesn't work on phone.
-When flashing custom ROM through fastboot, it gives "too many links" error, then bricks phone.
-When flashing custom ROM through AIO toolkit, it freezes on "waiting for device"
P.S. I have all the drivers installed, I have tried with the "Android modem" devices enabled and disabled, I tried all modes on KDZ, I tried changing the USB ports (only 2 on the back of PC, tried both) and still no go.
Thanks in advance.
Use aio toolkit cmd version, bcoz gui has lots of bugs right now.
Sent from my LG-GT540 using xda app-developers app
Still no luck. No matter what I do, it either "bricks" the phone (only download mode works), or it gives the "too many links" error.
Sigh.
sargeta said:
Still no luck. No matter what I do, it either "bricks" the phone (only download mode works), or it gives the "too many links" error.
Sigh.
Click to expand...
Click to collapse
i've had similar error once...
try to flash other size bootloader (appsbl) via fastboot
Managed to flash CM6 2.2.1 Utopia (miroslav's I thinki). Any other ROM bricks the phone.
Also, no boot logo/animation at all. (Yes, as I said, tried flashing V20A/B and out.kdz numerous times).
once you have fastboot , do not flash via kdz again !
also, try to flash different bootloader (appsbl) sizes (example 180mb)
then flash recovery , and then try rom's , that are recovery made (backups)
Hey,
I've tried to flash my lg g2 d802 with CM 11 with TWRP recovery
after 5 minutes is says : "fail"
I selected reboot system the phone stuck on the lg logo and the phone won't boot
then I've wipe everything
tried to boot the phone the phone won't boot
then i read a thread on XDA : http://forum.xda-developers.com/showthread.php?t=2451696
via "terminal command" method and the phone won't boot
then I booted the phone into download mode and downloaded kdz file then i tried to use the flash-tool and I have the "lg drivers" and also "lg-mobile support tool"
then the flash-tool is not responding :/
so what i can do ?
and should I wait for kitkat official update or flash rom ?
and if I want to flash rom which one is better for lg g2 d802 ?
Well did you make a backup b4 you tried flashing the rom to restore it if anything were 2 go wrong ? Its most likely it flashed partially but it wiped your original rom thats why u couldnt boot . if you can still boot into recovery mode try flashing a diffrent rom if you have any downloaded
Hellfire and liquidsmooth are best 4.4 roms...
Try installing these roms..
I've got a T-Mobile D801 and tried flashing to the stock lollipop rom D80130b_00 using TWRP and the instructions on this page, but the flash must have failed. I did a full factory reset back to stock 4.4.3 prior to attempting this flash and I'm not sure what (if anything) I did wrong for the flash to fail. I can boot in factory reset mode and select clear everything, but then I just see the android guy with gears turning for 2 seconds and the phone reboots again.
Now I'm in a bootloop where I get an "error: Boot certification verify" above the T-Mobile startup logo followed by a "Demigod Crash Handler: Critical Error!" screen that provides options for rebooting (volume down) or putting the phone into download mode (volume up). After using the volume up the screen displays "Volume Up is pressed: Jump to Dload mode" and after connecting via USB appears in device manager as "LGE AndroidNet USB Serial Port (COM41)". I can't (1) boot directly into download mode or (2) get back into TWRP.
I've tried both the KDZ and TOT methods listed in this thread and neither are working. The LG Flash Tool 2014 / KDZ option starts the LG Mobile Support Tool, but it fails every time once "S/W Upgrade is in progress" reaches 4% with a generic "Upgrade stopped due to an error" message.
The TOT method fails every time with a "Model Information Check FAIL!" message. The full text is - "PID: NULL, IMEI: NULL, Model: , DLL:801, BIN: BIN_LGD801AT-01-V10c-310-260-AUG-13-2013+0.tot , SWV: , SWOV: , Model Information Check FAIL! , 00000000"
I've also tried using srktool to repair fastboot, but it gets stuck at "waiting for device".
What do I try next?
Finally got back into 4.2.2 using tot method. LG Mobile Support Tool doesn't think updates are available though??
same situation lg g2 d802
losonn said:
Finally got back into 4.2.2 using tot method. LG Mobile Support Tool doesn't think updates are available though??
Click to expand...
Click to collapse
i am in same situation with lg g2 d802 model ..have you fixed your g2?
hunzz said:
i am in same situation with lg g2 d802 model ..have you fixed your g2?
Click to expand...
Click to collapse
Yes, I *think* what happened was that my 30b bootstack was flashed successfully via twrp, but then the actual kdz flash of D80130b_00 failed. I had a lot of trouble at this point - needed to fix qhsusb_bulk problems first, then use the more aggressive TOT flash method to reset to stock 4.2.2.
Finally the LG Mobile Tool was still reading it as having D80130b_00 / lollipop after going back to 4.2.2 via TOT (?). Last step was to do a full restore from the LG Mobile Support Tool (options -> upgrade recovery) and it actually downloaded / flashed D80130b_00 so everything is working well now :good:
If it helps anyone I used the LG backup tool to restore apps / media and have to say that for a stock solution it's pretty solid.
qhsusb_bulk?
losonn said:
Yes, I *think* what happened was that my 30b bootstack was flashed successfully via twrp, but then the actual kdz flash of D80130b_00 failed. I had a lot of trouble at this point - needed to fix qhsusb_bulk problems first, then use the more aggressive TOT flash method to reset to stock 4.2.2.
Finally the LG Mobile Tool was still reading it as having D80130b_00 / lollipop after going back to 4.2.2 via TOT (?). Last step was to do a full restore from the LG Mobile Support Tool (options -> upgrade recovery) and it actually downloaded / flashed D80130b_00 so everything is working well now :good:
If it helps anyone I used the LG backup tool to restore apps / media and have to say that for a stock solution it's pretty solid.
Click to expand...
Click to collapse
you said your g2 was detected as a lge androidnet in device manager but not as a qhsusb_bulk...then what problems have you fixed about qhususb_bulk? and what is the more aggressive tot method different from this threadhttp://forum.xda-developers.com/showthread.php?t=2432476
Were you able to find a solution? I'm in the same situation. Please help!
Update,
I fixed this problem by using LGUP. My phone was refurbished (ls980) so that's why twrp didn't booted,
Hello,
I have a LG G2 d802 32gb variant. I bought it a week ago. I was running andoid kitkat OS (HK D80220C). It wasn't rooted. I tried to get official updates from about phone section but "no updates". So i decided to manually flash updates from a rooted recovery as i did in my LG G3.
First of all I rooted it by "IOroot". Then tried to install custom recovery by "autorec d802". Everything went good and autorec was also successful. I asked me to reboot into recovery, I pressed yes and then it took me to "fastboot mode". I tried to reboot into OS by pressing power button (As battery is non-removable). Everytime it rebooted back into that fastboot mode. This once happened with me on LG G3. So i tried to flash "laf" and "recovery" image and downloaded from here
http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
I flashed them by CMD fastboot method. Now it stuck at "LG Logo" and download mode was also started. So i decided to install a stock rom by KDZ or Tot method. First i tried KDZ method. I downloaded stock rom "Hong Kong D80220C_00.kdz" which it was previously running. Also installed all drivers, downloaded flashtools2014 and connected phone while in download mode.
I started KDZ method as told here
http://forum.xda-developers.com/showthread.php?t=2432476
But everytime it shows internal error on "2 or 3 percent". It didn't worked for me. So i decided to do tot mothod.
Download tot file, dll file, LGFlashtool, drivers etc.
Followed whole process which was also described in above post. But when flashtool reached at 94 percent and mobile was being rebooted it showed error
"Fboot check"
"Fboot Check"
"Can't reboot completely"
I tried to turn of phone at this condition by waiting and then doing a factory reset by keys combination but it keeps resetting and rebooting. I searched whole internet but can't find a solution. Can anyone please help me. Because i bought this cellphone a week ago for my friend and i would not be able to face him after showing a sick phone. Please someone help .
Only download mode of phone is working, It also keeps led light on while stuck at logo.
dksoni411 said:
Hello,
I have a LG G2 d802 32gb variant. I bought it a week ago. I was running andoid kitkat OS (HK D80220C). It wasn't rooted. I tried to get official updates from about phone section but "no updates". So i decided to manually flash updates from a rooted recovery as i did in my LG G3.
First of all I rooted it by "IOroot". Then tried to install custom recovery by "autorec d802". Everything went good and autorec was also successful. I asked me to reboot into recovery, I pressed yes and then it took me to "fastboot mode". I tried to reboot into OS by pressing power button (As battery is non-removable). Everytime it rebooted back into that fastboot mode. This once happened with me on LG G3. So i tried to flash "laf" and "recovery" image and downloaded from here
http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
I flashed them by CMD fastboot method. Now it stuck at "LG Logo" and download mode was also started. So i decided to install a stock rom by KDZ or Tot method. First i tried KDZ method. I downloaded stock rom "Hong Kong D80220C_00.kdz" which it was previously running. Also installed all drivers, downloaded flashtools2014 and connected phone while in download mode.
I started KDZ method as told here
http://forum.xda-developers.com/showthread.php?t=2432476
But everytime it shows internal error on "2 or 3 percent". It didn't worked for me. So i decided to do tot mothod.
Download tot file, dll file, LGFlashtool, drivers etc.
Followed whole process which was also described in above post. But when flashtool reached at 94 percent and mobile was being rebooted it showed error
"Fboot check"
"Fboot Check"
"Can't reboot completely"
I tried to turn of phone at this condition by waiting and then doing a factory reset by keys combination but it keeps resetting and rebooting. I searched whole internet but can't find a solution. Can anyone please help me. Because i bought this cellphone a week ago for my friend and i would not be able to face him after showing a sick phone. Please someone help .
Only download mode of phone is working, It also keeps led light on while stuck at logo.
:crying:
Click to expand...
Click to collapse
Did you check the g2 general section on xda? If I remember correctly there some threads about this topic
i can not find my same problem in any thread
semo_medo said:
i can not find my same problem in any thread
Click to expand...
Click to collapse
could it be that your phone is refurbished ? and if its says its a d802 in fact is a ls980.?
Hi so my friend gave me his LG Leon to flash CM 12 because he didn't use it anymore. For my surprise when i turned on the phone it boots automatically in flash mode showing "910K" in the little box. I try to flash a kdz but nothing works, when the phones restarts boots in flash mode again.
I installed TWRP but always is showing that is not detecting the OS.
Why can I do?
Is a corruption of the partitions?
help
Try to flash a official rom using LGMobile Support tool. Connect the phone, open the program and Select "Option -> Upgrade recovery".
From what I can gather, the recovery was either replaced with an incorrect version or was corrupted.
Follow @He.Art
I had one backup of lgms345 flashabe if u want...its more easier