Related
Long Story As Short As Possible:
1-I Rooted my Sprint Galaxy S4 (with MF9) using Qbking77's You tube instructions (No Probs) !!
2-I dropped the Services.Odex, and Services.Jar into the systems/folder to replace the ones in there using root explorer to get the native hot spot working (It did NOT work) !!!
3-So I flashed via oden a "New" hot spot for rooted roms: "MDCHotspotMod-Odexed" onto the system, and now I am bricked...
I can boot into TWRP, BUT can't flash a rom to the system as it Fails.
I can flash the root "CF-Auto-Root-jfltespr-jfltespr-sphl720.tar" via oden which puts the stock recovery back onto the phone, BUT that wont't flash roms either.
SO, at a complete loss, I factory reset the device wiping everything, and it just boots to the Samsung Galaxy S4 Logo.
I downloaded the following: L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 to try and flash back to stock in Oden, BUT, when I hit "Start" it doesn't do anything but say "The Parameter is incorrect"
This is the Stock MDC File, NOT the MF9 that my phone was currently on...
ANY SUGGESTIONS !!! Thanks guys.
Solved !!! Used MF9 Stock Tar file in Oden !!!
Glad you got it working!
Just in case you were wondering why it didn't work initially - you were on MF9, and you tried to flash the MDC hotspot mod.
And yes, flashing the stock MF9 in ODIN was the right step to fix this. If you now want to install the hotspot mod, make a nandroid backup, download the MF9 version and flash it in TWRP.
jj14 said:
Glad you got it working!
Just in case you were wondering why it didn't work initially - you were on MF9, and you tried to flash the MDC hotspot mod.
And yes, flashing the stock MF9 in ODIN was the right step to fix this. If you now want to install the hotspot mod, make a nandroid backup, download the MF9 version and flash it in TWRP.
Click to expand...
Click to collapse
Any word on getting the hot spot feature working on the MF9 ?? Either Wifi Tether (specific settings), OR the regular built in Hot Spot?? Thanks... Also, I def know about the different software versions I.E. MDL, MDC, and MF9, the site said that particular file would take me back to stock & I would just have to OTA !!! Guess they were wrong, lol...:laugh: Anywho, thanks again, it's nice being able to get help when needed !!!
Ar3ohdee said:
Any word on getting the hot spot feature working on the MF9 ?? Either Wifi Tether (specific settings), OR the regular built in Hot Spot?? Thanks... Also, I def know about the different software versions I.E. MDL, MDC, and MF9, the site said that particular file would take me back to stock & I would just have to OTA !!! Guess they were wrong, lol...:laugh: Anywho, thanks again, it's nice being able to get help when needed !!!
Click to expand...
Click to collapse
Here you go bro, this should do the trick and get a working hotspot mod for you on that s4
http://forum.xda-developers.com/showthread.php?p=40860639
[MOD][Deodex][Odex][MDC][MDL][MF9]Hotspot Mod
gs4 stock rooted running mf9
MENACE_69 said:
Here you go bro, this should do the trick and get a working hotspot mod for you on that s4
http://forum.xda-developers.com/showthread.php?p=40860639
[MOD][Deodex][Odex][MDC][MDL][MF9]Hotspot Mod
gs4 stock rooted running mf9
Click to expand...
Click to collapse
Yep - this is the one that I use as well.
@Ar3ohdee Just make sure that you get the correct version depending on your ROM - odex/deodex and MDC/MDL/MF9
BTW, if you were on stock MDC, you could update OTA to MDL and then to MF9 - that option would have worked too. But flashing the stock MF9 is quicker.
just bricked my galaxy s4 and its stuck at samsung custom screen.. cant get it out of it.... what do i do.. i'm new to this and i new i was going to do this sooner or later....
wahlmart said:
just bricked my galaxy s4 and its stuck at samsung custom screen.. cant get it out of it.... what do i do.. i'm new to this and i new i was going to do this sooner or later....
Click to expand...
Click to collapse
you may need to give us more info than that. what did you try flashing? were you already running a custom rom? mdc, mdl, mf9? did you try manually booting to recovery? (power + vol up)
open a new thread too, may have better luck
Ar3ohdee said:
Solved !!! Used MF9 Stock Tar file in Oden !!!
Click to expand...
Click to collapse
Where'd you find the MF9 Stock Tar file? I screwed up my phone with the wrong version of the hotspot files....
jm1fd said:
Where'd you find the MF9 Stock Tar file? I screwed up my phone with the wrong version of the hotspot files....
Click to expand...
Click to collapse
You mean like from here?
http://forum.xda-developers.com/showthread.php?t=2357471
Bricked on mk2
So I was on stock rooted mk2 with twrp recovery. Did a nand. Flashed kt kernel. Phone wouldn't get passed Samsung splash screen. Couldn't even boot into recovery. Took it to best buy. Tech, if you can call him that, said was bricked and I needed a replacement. Luckily just bought it so free replacement. Played dumb. Probably could have recovered if I Odin the stock firmware. My question is, what do you think caused the brick? Mk2 bootloader? Twrp? The kernel? I flashed plenty of roms and kernels on my s2 without problems. BTW flashed Hotspot mod with cwm and worked.
Okay, so long story short AT&T has cockblocked me from recovering my phone. I know, it has a locked bootloader. I get that. But let me start from the beginning. I was rooted (4.3), and my phone auto updated to KK, and essentially soft-bricked my phone. Well, I had to flash my 4.3 firmware (or so I thought) back onto my phone through Odin. The firmware turned out to be 4.2.2, and all of it failed to flash except the modem. It still started up fine, but I couldn't connect to wifi. It wasn't even an option to turn it on. Turns out I was still on 4.3, with a baseband of MF3, and a build number ending in MK2. I didn't know how to fix this, so I've kinda flashed it with all sorts of things hoping it would help. I've tried all variations of 4.2.2 seeing if I can get things to be all either MF3 or MK2, so far no luck. Well today I tried to flash it with MK2 firmware, and it went like 95% through, and failed. Restarted, and it says "System software not authorized by AT&T has been found on your phone."
This is because of the bootloader, I get it.
The 4.2.2 modem is the only thing to successfully flash. Any clues why? Any clues onto how to recover my phone at all? You guys are true geniuses, please help.
Also, my device status is still on "custom" with the unlocked icon.
Any help would be tremendous, as I feel like a complete and utter moron. I have both Windows 7 & Linux Mint my use, so suggest anything. Please. I'm begging you.
I had the same problem i soft bricked my phone by installing MF3 and i was already on MK2. Just download MK2 http://forum.xda-developers.com/showthread.php?t=2621279 flash first only AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 by using PDA on oDin see if that fixes your problem.
jeff7790 said:
I had the same problem i soft bricked my phone by installing MF3 and i was already on MK2. Just download MK2 http://forum.xda-developers.com/showthread.php?t=2621279 flash first only AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 by using PDA on oDin see if that fixes your problem.
Click to expand...
Click to collapse
Do you know of a good repository or place were i can download basebands updates (Modem.bin) for my i337?
If i upload a phone baseband i337 with a i337m, would it work?
Never mind found the solution in the forum. Thx
Sent from my GT-I9505G using xda app-developers app
I recently bit off more than I could chew with my S4 (I337). I had 4.4.2 KitKat on it and wanted to root it to add teathering. I decided thought there was no root for 4.4.2 so I thought I would try downgrading to 4.3 then root. This seemed best because I didn't like the way the SD card is handled in 4.4.2 and some of my apps (like ftp server) have stopped working.
When I got the phone back up from flashing with Odin it says it has version 4.3. My WiFi will not turn on. If I slide the switch to on it slides right back to off and the phone tells me that an operation was block (can't remember the full verbage. I have installed and attempted to install many things on my phone. I have used recovery mode / Odin3 and Kies (Kies doesn't allow much).
At this point I just would like to get my phone back to 4.4.2 with the WiFi working. Then I can restore my backup and be back to square one with a lesson learned.
I have an I337 that currently thinks it has version 4.3 on it. The baseband version is I337UCUFNC1 currently. The build number is JSS15J.I337UCUEMK2.
If anyone can help I would greatly appreciate it. I have read and tried many things over a two day period and finally decided to ask for help.
Had this issue before on my Bell Canada S4, but don't recall exact way to fix it.
Think the solution was to find an older (might be newer) stock. I think I used a different version like the Telus Canada version as well and it ended up working. Then you update through kies after.
jbrudda said:
I recently bit off more than I could chew with my S4 (I337). I had 4.4.2 KitKat on it and wanted to root it to add teathering. I decided thought there was no root for 4.4.2 so I thought I would try downgrading to 4.3 then root. This seemed best because I didn't like the way the SD card is handled in 4.4.2 and some of my apps (like ftp server) have stopped working.
When I got the phone back up from flashing with Odin it says it has version 4.3. My WiFi will not turn on. If I slide the switch to on it slides right back to off and the phone tells me that an operation was block (can't remember the full verbage. I have installed and attempted to install many things on my phone. I have used recovery mode / Odin3 and Kies (Kies doesn't allow much).
At this point I just would like to get my phone back to 4.4.2 with the WiFi working. Then I can restore my backup and be back to square one with a lesson learned.
I have an I337 that currently thinks it has version 4.3 on it. The baseband version is I337UCUFNC1 currently. The build number is JSS15J.I337UCUEMK2.
If anyone can help I would greatly appreciate it. I have read and tried many things over a two day period and finally decided to ask for help.
Click to expand...
Click to collapse
Root, install safestrap then flash this ROM and you will be good to go: http://forum.xda-developers.com/showpost.php?p=52167774&postcount=3
Thanks
muniz_ri said:
Root, install safestrap then flash this ROM and you will be good to go: http://forum.xda-developers.com/showpost.php?p=52167774&postcount=3
Click to expand...
Click to collapse
Quite a few steps in those threads but I got it working again. I really appreciate all the help/advice given. Now to decide if I want to remove the safestrap screen on boot. Again Thanks.
Same problem,need help plz
Hi guys,
I have the same problem as jbrudda.i wiped everything using Odin3_v3.09 and AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar . and now my wifi is not working. when i try to turn it on a security message pop up (the device has detected an application attempting to perform actions that are not permitted these actions have been blocked)and ask me to reboot, then it does a factory reset on its own. but the problem is still there no wifi. my baseband is diffrent than jbrudda's. mine is I337UCUAMDB. can someone plz help. thank you
karim8888 said:
Hi guys,
I have the same problem as jbrudda.i wiped everything using Odin3_v3.09 and AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar . and now my wifi is not working. when i try to turn it on a security message pop up (the device has detected an application attempting to perform actions that are not permitted these actions have been blocked)and ask me to reboot, then it does a factory reset on its own. but the problem is still there no wifi. my baseband is diffrent than jbrudda's. mine is I337UCUAMDB. can someone plz help. thank you
Click to expand...
Click to collapse
Wifi does not work because of the modem/kernel mismatch, i.e. MDB modem and MK2 kernel. Not sure what your goal was when you began flashing your phone but since you fortunately did not flash teh MK2 bootloader you are still able to locate the MDB full odin tar and flash back to stock which will resolve your issue.
muniz_ri said:
Wifi does not work because of the modem/kernel mismatch, i.e. MDB modem and MK2 kernel. Not sure what your goal was when you began flashing your phone but since you fortunately did not flash teh MK2 bootloader you are still able to locate the MDB full odin tar and flash back to stock which will resolve your issue.
Click to expand...
Click to collapse
I did Root it with saferoot and safestarp.the wifi didnt work so i had to find a script here on xda and i run it throughout universal init.d . i didnt like the way my phone was running . so i decided to unroot it . so you think im using the wrong TAR file ???
karim8888 said:
I did Root it with saferoot and safestarp.the wifi didnt work so i had to find a script here on xda and i run it throughout universal init.d . i didnt like the way my phone was running . so i decided to unroot it . so you think im using the wrong TAR file ???
Click to expand...
Click to collapse
It depends on what you are trying to accomplish. Are you trying to upgrade to MK2 or higher while maintaining your unlocked MDB bootloader?
muniz_ri said:
It depends on what you are trying to accomplish. Are you trying to upgrade to MK2 or higher while maintaining your unlocked MDB bootloader?
Click to expand...
Click to collapse
I'm just trying to take it back to the why it was. and upgrade to kitkat. i have now build number JSS15J.I337UCUEMK2 baseband : I337UCUAMDB
what do you think i should do?? I appreciate your help.
karim8888 said:
I'm just trying to take it back to the why it was. and upgrade to kitkat. i have now build number JSS15J.I337UCUEMK2 baseband : I337UCUAMDB
what do you think i should do?? I appreciate your help.
Click to expand...
Click to collapse
If you don't care about losing your MDB unlocked bootloader you can get to the latest kitkat firmware by flashing the NB1 full odin tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223, then once flashing is complete go to settings/more/about phone/software update then take the ota update to NC1 which is the latest kitkat version for our phone.
But what I would do is keep your unlocked MDB bootloader and since you already flashed the MK2 AP file you can get your phone running well again by flashing the MK2 modem: https://mega.co.nz/#!pwESna5I!YK7EKG37xXIG1ReB-Z-mfSMoXNkXQ9t2EdMK9ofgJKg
From there, there are still a number of options available to get to kitkat which I won't get into.
muniz_ri said:
If you don't care about losing your MDB unlocked bootloader you can get to the latest kitkat firmware by flashing the NB1 full odin tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223, then once flashing is complete go to settings/more/about phone/software update then take the ota update to NC1 which is the latest kitkat version for our phone.
But what I would do is keep your unlocked MDB bootloader and since you already flashed the MK2 AP file you can get your phone running well again by flashing the MK2 modem: https://mega.co.nz/#!pwESna5I!YK7EKG37xXIG1ReB-Z-mfSMoXNkXQ9t2EdMK9ofgJKg
From there, there are still a number of options available to get to kitkat which I won't get into.
Click to expand...
Click to collapse
I will try this steps and let you know.thanks a lot.
It worked "muniz_ri". Thanks a lot for your help, I really appreciate it. :laugh::good:
karim8888 said:
It worked "muniz_ri". Thanks a lot for your help, I really appreciate it. :laugh::good:
Click to expand...
Click to collapse
Hey guys.
I lost al sounds on my phone now.Wifi is running , I thought the fix worked but the sound is out now. any suggestions???
Thank you.
jbrudda said:
I recently bit off more than I could chew with my S4 (I337). I had 4.4.2 KitKat on it and wanted to root it to add teathering. I decided thought there was no root for 4.4.2 so I thought I would try downgrading to 4.3 then root. This seemed best because I didn't like the way the SD card is handled in 4.4.2 and some of my apps (like ftp server) have stopped working.
When I got the phone back up from flashing with Odin it says it has version 4.3. My WiFi will not turn on. If I slide the switch to on it slides right back to off and the phone tells me that an operation was block (can't remember the full verbage. I have installed and attempted to install many things on my phone. I have used recovery mode / Odin3 and Kies (Kies doesn't allow much).
At this point I just would like to get my phone back to 4.4.2 with the WiFi working. Then I can restore my backup and be back to square one with a lesson learned.
I have an I337 that currently thinks it has version 4.3 on it. The baseband version is I337UCUFNC1 currently. The build number is JSS15J.I337UCUEMK2.
If anyone can help I would greatly appreciate it. I have read and tried many things over a two day period and finally decided to ask for help.
Click to expand...
Click to collapse
I told you not to drink and root.
jbrudda said:
Quite a few steps in those threads but I got it working again. I really appreciate all the help/advice given. Now to decide if I want to remove the safestrap screen on boot. Again Thanks.
Click to expand...
Click to collapse
excited to give this a try. rooted with the downgrade method a couple months ago but left with a non-wifi device. my only issue is that the thread says it's for I337UCUFNC1 and our devices are on jss15j.i337ucuemk2. will this fix still work? I've heard on other threads on the subject that the modem kernel doesn't match up with the flashed rom or build number or something.
bux
karim8888 said:
Hi guys,
I have the same problem as jbrudda.i wiped everything using Odin3_v3.09 and AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar . and now my wifi is not working. when i try to turn it on a security message pop up (the device has detected an application attempting to perform actions that are not permitted these actions have been blocked)and ask me to reboot, then it does a factory reset on its own. but the problem is still there no wifi. my baseband is diffrent than jbrudda's. mine is I337UCUAMDB. can someone plz help. thank you
Click to expand...
Click to collapse
Do you already fix it??? cause i have the same problem
Same question, different thread!
Not even an hour ago did I answer the same question in a different thread: How do I get WiFi working on my S4?
Well here you go.
My original answer: http://forum.xda-developers.com/gal...-4-4-2-nb1-t2850878/post54978150#post54978150
The problem is, in order to get WiFi working, you need to install the NB1 modules, but to do that, you need to install Safestrap. However, you can not install Safestrap because the app keeps closing on you. There is a simple fix to this, which I will explain later. For now, just read this WHOLE post BEFORE you do anything, and keep in mind that I am NOT held liable if you mess up your phone. Use this at your own risk.
1.) Root your phone
If you're already rooted with something like SuperSU or Superuser, skip this. If not, read ahead. Download and install the Towelroot APK file attached to this post, open it, and click 'make it ra1n'. If your phone didn't reboot, now you have root (they need to trademark that). Now, down below, I also included the APK for SuperSU. Download and install it. Now open it. When you open it, let it install the 'Normal' way, not via the 'TWRP/CWM' way. Also, when it asks you to disable KNOX, say yes, wait a couple of minutes (it will still be loading) and reboot your phone. Open up SuperSU again, click 'Yes' to disable KNOX again, and now you have a good base to start from.
2.) Install Safestrap AFTER fixing the error
The error your are getting is easily fixed. Go to the Play Store and install 'SELinux Mode Changer'. Open it, grant it root access, and change the mode to 'Permissive'. Now, open up Safestrap again (you mentioned you already installed it), and it shouldn't force close. Click 'Install', and if the 'Reboot to Recovery' option below is not grayed out after that then it worked.
3.) Download and install the NB1 modules
On your phone, download the included NB1 modules ZIP file I attached for you, and once that is done you need to reboot. After the Galaxy S4 logo, you'll see a screen that says 'SAFESTRAP: DISABLED' and there will be a little robot. TIP: To enter Safestrap, press the menu button (physical, hardware key) under 'Recovery' at that screen. To continue to Android, press the back key (again, physical) under the 'System' tab. For now, press the menu button under 'Recovery'. Now, click 'Install' which should be in red, click 'Add zips', and navigate to your Downloads folder. Now click on the NB1 modules ZIP you just downloaded. Swipe to install, and reboot. This time, hit the back key under 'System'.
All done!
Now, Android should (and will) boot up, and you'll have working WiFi! If, for some odd reason, you don't have WiFi- do NOT panic! Just search around for the MF3 modules and flash those! All is good, all is good. A lot of this guide was taken from my post about my personal method of SIM unlocking the AT&T Galaxy S4 without the dialer codes or an AT&T SIM. It was just modified a little to work for you.
Remember, hit thanks!
Click to expand...
Click to collapse
Those are my exact words. Also, the attached files (NB1 modules, SuperSU, Towelroot, etc.) can be found attached to my post in the link above. Have a good night, and best of luck! :good::good::good:
Had the Wifi Not Working - Fixed
muniz_ri said:
If you don't care about losing your MDB unlocked bootloader you can get to the latest kitkat firmware by flashing the NB1 full odin tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223, then once flashing is complete go to settings/more/about phone/software update then take the ota update to NC1 which is the latest kitkat version for our phone.
But what I would do is keep your unlocked MDB bootloader and since you already flashed the MK2 AP file you can get your phone running well again by flashing the MK2 modem: https://mega.co.nz/#!pwESna5I!YK7EKG37xXIG1ReB-Z-mfSMoXNkXQ9t2EdMK9ofgJKg
From there, there are still a number of options available to get to kitkat which I won't get into.
Click to expand...
Click to collapse
I just flashed I337MK2StockModem.tar.md5 and now it works!! I'm on the MK2 and rooted with saferoot and safestrap recovery 3.72
iqcomputers said:
I just flashed I337MK2StockModem.tar.md5 and now it works!! I'm on the MK2 and rooted with saferoot and safestrap recovery 3.72
Click to expand...
Click to collapse
See the thread I started with a similar problem.
http://forum.xda-developers.com/galaxy-s4-att/help/rogers-samsung-s4-4-2-2-i337m-wifi-t3256535
Would I be able to use this fix?
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Also the phone won't boot at all unless hooked up to a power supply, the battery alone doesn't do anything.
nate39 said:
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Click to expand...
Click to collapse
More info is needed. What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
StoneyJSG said:
More info is needed. Which GS3 do you have? What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
Right now, it sounds like you might need to use enewman17's ODIN debrick file.
Click to expand...
Click to collapse
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Well I finally got into recovery and did a factory reset, now it boots into the AT&T white splash screen before it just turns off. I am also wondering if my battery just died for some reason?
nate39 said:
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Click to expand...
Click to collapse
ODIN 10? Try using ODIN 3.09 and see if that helps. The latest update would be Android 4.4.4 NJ4 firmware. This link should help you, it will give you root with safe strap recovery though: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
I meant 3.10, I will try the older version. What file should I flash?
nate39 said:
I meant 3.10, I will try the older version. What file should I flash?
Click to expand...
Click to collapse
Check out the link I posted in my last post. It should help you get your phone fixed.
I have been there. I went to the very last option which seems to be what I need unless I am missing something.
Neither odin 3.09 or 3.10 will even flash any file now. it either says invalid md5 or fails when it attempts it.
Well, I finally got it to boot into android but it is flaky at best. It is android 4.3 instead of 4.4 where it was initially. The wifi still doesn't work and now the keyboard keeps crashing everytime I do something. The build is jss15j1337ucuemk2 which I know is older than I had before. Does this give anyone a better idea of what I need to do? If I can get a stable flash then can I flash a modem file to fix the wifi? I really need some direction, thanks
Turns out the battery was completely drained which was causing some of the boot problems, I don't now how that happened but I am charging it now.
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
If I were in your shoes I'd flash the nb1 tar file in Odin, any vein should work. See this for the tar file http://forum.xda-developers.com/showthread.php?p=56453100. You can then ota to the latest firmware which is 4.4.4, nj4
Sent from my Nexus 9 using XDA Free mobile app
thanks, and as far as you know this doesn't mess wifi up?
nate39 said:
thanks, and as far as you know this doesn't mess wife up?
Click to expand...
Click to collapse
I assume you ment WiFi and not wife? Can't help you with the wife but Wi-Fi should work fine
Sent from my Nexus 9 using XDA Free mobile app
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Muthumbi said:
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Click to expand...
Click to collapse
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I agree. But google has basically all he needs. More so rapidgator
I haven't found anything from Samsung to download. If I flash a newer build, do I also need to flash a modem file and a bootloader or can I just flash the PDA? thanks for explaining this to me.
And can I do a dirty flash so I don't have to lose everything again?
well, now I see that there is no sound. so I guess I will have to flash again.
nate39 said:
well, now I see that there is no sound. so I guess I will have to flash again.
Click to expand...
Click to collapse
There's. Something I'm yet to understand. Did you finally manage to boot into recovery? If so, flash a custom recovery (I recommend philz touch recovery) then use it to make complete wipe.
Then boot into download mode and flash latest pda firmware in the compressed file you downloaded. Ps: make sure it's from your region.
May be if you provided me with your region I'd get you all the files required
Was trying to use flashfire to retain root and upgrade to lollipop from 4.2.2 MF3 kernel (locked bootloader). After that it wouldn't get past the boot logo. I thought no biggie, but now that I have tried using ODIN probably 20 different times with it always failing at system.img I am losing hope.
I've tried numerous usb cables and ports and am running on a windows 8.1 PC. I have a complete set of MF3 tar files that I have been using and a pit file to restore the bootloader(?) after PDA fails. It seems there is always some sort of solution and am hoping that someone more experienced than me can give me some guidance? Please help, I just need this thing functioning again.
Have you tried flashing nb1? If not, I'd try that, and then upgrade to nj4 if you don't want to go to lollipop. Downloads and instructions here if you need it.
You can always try a different computer seems to have worked for me on one then more occasion also try using a box to do the flash for you if you know of someone that has a z3x box or octopus box they can probably help you out. or try using a different version of odin and if all else fails try using KIES (SMART SWITCH) which i do hate to recomend but seems to help people in these situations. about root what S4 do you have an I337 or the I337m and you can always flash TWRP and install GOLDENEYE (only if your the I337m variant. Hope this post helps you ill keep in eye on the post to see if i can further help you.