Hi everyone,
this maybe a very noob question but how do you change the CSC on the S4?
I recently flashed an unbranded UK firmware onto my Australian S4, back with my old phone, I was able to change the CSC with *#272*IMEI# though that doesn't seem to work now. So any ideas? Any help would be greatly appreciated. I want to change the CSC to a UK CSC so I'll be able to receive updates OTA or through kies.
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA section of Odin
5.You now have correct CSC
Sent from my GT-I9305 using XDA Premium HD app
Is anyone having trouble changing their CSC?
I've flashed the pre-rooted UK Firmware, and used CSC Changer to set the CSC to BTU.
It automatically re-boots, but the CSC hasn't changed.
I boot into recovery and perform a F.Reset, and the CSC still doesn't change to BTU.
As far as I can tell, I'm following all instructions correctly from here.
http://forum.xda-developers.com/showthread.php?t=2250824
"If someone want to change CSC, please use this app: Samsung Galaxy S2/S3 CSC
After using this app you MUST reboot into RECOVERY for the changes to take place.
Don't worry if you see some errors in recovery, it's NORMAL as "hidden.img" is excluded..
WORKS perfectly! TESTED!! "
I don't know what I'm doing wrong, and I'm getting increasingly frustrated!
Obagleyfreer said:
1.Download the appropriate firmware for your region from sammobile.
2.Extract Hidden.img and cache.img
3.Now compress these two files together into a .Tar file.
4.Flash this in PDA section of Odin
5.You now have correct CSC
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Tried that without success. Got a failure in Odin.
There's no hidden.img nor cache.img but hidden.img.ext4 and cache.img.ext4. Are these the correct files?
I downloaded latest btu UK firmware
Loaded with odin
Did a factory reset
Switched if and then went into recovery mode
Rebooted and btu was activated
I was not rooted
Sent from my GT-I9505 using xda premium
Lipito said:
Tried that without success. Got a failure in Odin.
There's no hidden.img nor cache.img but hidden.img.ext4 and cache.img.ext4. Are these the correct files?
Click to expand...
Click to collapse
they are just ext4 formats so u could mount it on linux or something else..
use mkuserimg.sh command to convert
I'm also interested in this. I also changed from Australian firmware to UK. Since changing I've noticed HD voice (wb amr) is off (check by typing *#0011# into dialer then menu key>back>menu key>key input >enter '1' then wait till menu appears >WB AMR Status.)
Prior to changing roms both WB AMR Setting and UTMS WB was On. Now they're both off. I did some searching and apparently its tied to the CSC.
so.....how do we change csc to s4? i have installed unbranded rom, wiped but csc remained the same. how de we change this?
I9505 stuck with wrong CSC
gangstar said:
so.....how do we change csc to s4? i have installed unbranded rom, wiped but csc remained the same. how de we change this?
Click to expand...
Click to collapse
I am also stuck after trying several suggestions of fixes..
The Sammobile firmware for NEE (Nordic) gives a CSC of BTU, i previously had H3G
Looks like we will have to wait till DEV's get time to build a work-around.
Doing web searches there are several dodgy sites that claim older changers work on the S4 & also giving instructions to install via the old way with the 3 files, instead of just the PDA.
Hikari0307 said:
Hi everyone,
this maybe a very noob question but how do you change the CSC on the S4?
I recently flashed an unbranded UK firmware onto my Australian S4, back with my old phone, I was able to change the CSC with *#272*IMEI# though that doesn't seem to work now. So any ideas? Any help would be greatly appreciated. I want to change the CSC to a UK CSC so I'll be able to receive updates OTA or through kies.
Click to expand...
Click to collapse
Try this to change CSC:
http://droidviews.com/2012/how-to-change-csc-in-samsung-galaxy-phones/
Very well written article, so thank you for the link. Sadly though, one of the methods worked for me. Any more ideas gratefully received though!
++
VogonP0et said:
Very well written article, so thank you for the link. Sadly though, one of the methods worked for me. Any more ideas gratefully received though!
Click to expand...
Click to collapse
i just reboted in stock android recovery (hold vol up + home button+ power),and it said "applied multi csc....and it changed the csc to the my curent firmware¨s csc
I am trying to set my csc to BTU. Im using csc changer app.
However everytime I run it, I dont get a screen allowing me to choose the csc as they show in guides.
I know the app works, since its changed my csc from EVR to DBT (since my rom is german based).
What am I doing wrong?
After playing around with several stock firmwares and Odin, I accidentally stumbled upon a method to change the CSC of my S4 I9505 without the need to root the device. I successfully changed from the original TGY (Hong Kong) to SIN (Singapore) and then to DBT (Germany). This is what I did (in summary)
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via Settings > Accounts
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
kaushalls said:
After playing around with several stock firmwares and Odin, I accidentally stumbled upon a method to change the CSC of my S4 I9505 without the need to root the device. I successfully changed from the original TGY (Hong Kong) to SIN (Singapore) and then to DBT (Germany). This is what I did (in summary)
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via Settings > Accounts
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
Click to expand...
Click to collapse
It's unnecessary to do steps 7-10. You may check your new CSC in recovery mode after restoring the device.
Drunk1105 said:
It's unnecessary to do steps 7-10.
Click to expand...
Click to collapse
I was thinking so too but that's exactly what helped me to change CSC on my i9295 (very common with i9505). After the first wipe I still had the old CSC (I checked in Kies though). After the full procedure I have proper CSC in Kies. Probably there is a easier way but this one works also.
gtp said:
I was thinking so too but that's exactly what helped me to change CSC on my i9295 (very common with i9505). After the first wipe I still had the old CSC (I checked in Kies though). After the full procedure I have proper CSC in Kies. Probably there is a easier way but this one works also.
Click to expand...
Click to collapse
You had to restart Kies, it would show the new CSC then.
Drunk1105 said:
You had to restart Kies, it would show the new CSC then.
Click to expand...
Click to collapse
Of course I restarted Kies. I think what I have not done is entering Recovery once the Odin flash is done. Entering Recovery gives the following: Applying Multi-CSC... Applied the CSC-code: XXX (my new CSC here). And I think here's where all the magic happens.
gtp said:
Of course I restarted Kies. I think what I have not done is entering Recovery once the Odin flash is done. Entering Recovery gives the following: Applying Multi-CSC... Applied the CSC-code: XXX (my new CSC here). And I think here's where all the magic happens.
Click to expand...
Click to collapse
At least for me, my device goes in to "Recover Booting" after each Odin flash as well as a factory reset. I actually tried a a manual recovery boot via Vol Up + Home + Power after the factory reset in step 6, but it did not change my CSC, hence doing all steps is what worked for me all the time. I once skipped the Google login part after the factory reset and it didn't work that time either and had to do another factory reset, google login and another re-flash.
I wish there is an easier way, the reason I have been experimenting with different firmwares is to see if I can get LTE working natively, since phone does not show the LTE option under Mobile Networks. We have 2 operators offering LTE here in Sri Lanka but Samsung only sells the I9500 officially here which does not have LTE, so got down my I9505 from HK. So far I have had to use Viaero 4G Toggle app from the play store to enable LTE, while it works, enabling LTE this way is a huge battery drainer!
but is there a way to extract CSC from a particular firmware and flash only this?
I used to do it on my S3 by using the hidden.img and the cache.img but if I try in Odin on the S4 it fails (
Hi,
Had a Vodafone branded S5, and I just downloaded the BTU generic firmware and flashed it over.
None of the phone was reset, the apps were still there, apart from the vodafone bloat, that had gone.
Running a phone info app, it says original CSC is VOD, firmware CSC is BTU, active CSC is VOD/BTU
Anyway of totally flashing BTU and getting it to reset fully? I flashed using Odin 3.09 using the firmware in AP and F. Reset Time and Auto Reboot ticked
Do a data factory reset and reflash the firmware again. That should solve the issue. Had the same with my T-Mobile unlocked S5.
gee2012 said:
Do a data factory reset and reflash the firmware again. That should solve the issue. Had the same with my T-Mobile unlocked S5.
Click to expand...
Click to collapse
Doing a factory reset now has it as:
Original CSC = BTU
Firmware CSC = BTU
Active CSC = VOD/BTU
TheMathMan said:
Doing a factory reset now has it as:
Original CSC = BTU
Firmware CSC = BTU
Active CSC = VOD/BTU
Click to expand...
Click to collapse
Reflash the BTU firmware once again, first uncheck Auto Reboot in Odin and after the flash pull the battery, boot into recovery and factory reset/wipe cache and it should say BTU CSC.
gee2012 said:
Reflash the BTU firmware once again, first uncheck Auto Reboot in Odin and after the flash pull the battery, boot into recovery and factory reset/wipe cache and it should say BTU CSC.
Click to expand...
Click to collapse
A few factory resets and a couple of further flashes and it looks like we're there!!
So im currently have this phone GT-I9505 with firmware I9505XXUGNH8_I9505OLBGNH2_XTC and i dont have CSC when i check it using *#1234#
But everything is working fine, wifi, blueetoth, mobile data. i dont have any problem. How do i fiox this? can i just flash a csc? my phone CSC
in firmware is I9505OLBGNH2, but cant find flashable CSC tar or zip. I did try changing my CSC code, *#272*IMEI# but it doesnt work.
SO i Lost when i flash a Stock firmware UK BTU I9505XXUHOB7_I9505BTUHOB4_BTU from kitkat I9505XXUGNH8_I9505OLBGNH2_XTC
and then downgraded again to I9505XXUGNH8_I9505OLBGNH2_XTC. so when i downgraded my firmware ofcourse i wipe data and cache 1st
then reboot to download mode and flash stock kitkat autoreboot is untick then flash I9505XXUGNH8 bootloader and modem.
everything works fine except i dont have a csc and my country is SIN(singapore) is should be XTC(Open line) Philippines.
any help is appreciated.
Problem SOlved: i fix it by flashing the same firmware, what i did was, wipe date factory reset, wipe cahce then shutdown and enter download mode.
flash same firmware then i use *#272*IMEI# (this will wipe your data) and choose my country code. the device rebooted itself to recovery.
then device installed my country CSC (which is XTC for me). check my csc using *#1234#.
OK - I started with a unbranded UK A300FU - CSC code BTU on 5.x
I flashed a (supposedly) UK VOdafone 6.0.1 rom using Odin and the ROM n the AP sjlot
It appears this failed - my Modem wasn't updated an WiFi failed - the advice elsewhere is to go into download from a cold phone.
Also, it would appear the firmware wasn't UK, but some germanic version
I restored from a TWRP backup
My phone details now says the "orginal CSC Code" is VD2
If I want get back to showing Original code as BT should I re-flash in Odin the firmware that matched the twrp backup ? If so , should I stil use the AP slot, or should I use the CSC slot?
Many thanks
Use CSC slot.
Also, the reason why your TWRP backup restoration didn't touch the CSC is that it has it's own partition, which one normally does not backup.
You could flash an entirely unbranded marshmallow rom of your choice, and flash the BTU CSC of lollipop, it should still theoretically work.
HI guys i bought a galaxy s8... and i downloaded the latest DBT CSC firmware from sammobile.. I flashed the firmware and after everything was complete and i didnt get DBT CSC i got XEU CSC and notification to factory reset my phone provider change. I reseted my phone to factory and now i have see/see/vd2 i tried flashing again with odin but i cant revert to XEU CSC is ther any method to go back to XEU? the phone is not rooted