Related
I followed the instructions like another thread comment said to do but for some reason I couldn't get it to work still but after playing around I was able to get it working.
---- Instructions for enabling: (thanks eyecon82) ----
1. dial ##3282#
2. then click edit (need MSL code) (I used SPCUtility.apk as nothing else worked on my S5)
3. then click LTE
4. It will show LTE ( also known as Band 25), Band 3, Band 26, Band 41 ( I unchecked marked all of these but the LTE option leave that check marked to on)
5. Disable all bands leave LTE check mark to say on.
6. Go to the main directory by hitting back key and choose More at the bottom
7. Choose HDR/1X Selection and choose LTE only Mode. Click OK to save
8. You can either reboot or I just turn on airplane mode and turn it back off to reset the connection.
9. LTE should be working like mine did. But you will not get phone calls until you turn back on the HDR/1X Selection to LTE + CDMA +EVDO Mode but you will get text messages fine.
The items that are underlined in Red are the stuff i added.
---- To tell what Band on: ----
1. ##debug#
2. enter passcode 777468
3. go to LTE engineering menu
I hope this helps because all the other stuff I read would not work for my Galaxy S5 I just bought.
Thanks
One more thing
I read on here http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/
that this problem should be fixed soon but if you need LTE now here it is.
darhoade said:
I read on here http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/
that this problem should be fixed soon but if you need LTE now here it is.
Click to expand...
Click to collapse
Thanks for the info. However, I think its crazy to want to set it up for LTE when you cannot receive phone calls especially since this is you know, is a phone. Calling Sprint and talking about this situation is useless. They all say nothing is wrong and its the device. I'm really pissed off about this but I enjoy the phone. This will probably be the last Sprint phone I will get.
Sent from my SM-G900P using xda app-developers app
pastert33 said:
Thanks for the info. However, I think its crazy to want to set it up for LTE when you cannot receive phone calls especially since this is you know, is a phone. Calling Sprint and talking about this situation is useless. They all say nothing is wrong and its the device. I'm really pissed off about this but I enjoy the phone. This will probably be the last Sprint phone I will get.
Sent from my SM-G900P using xda app-developers app
Click to expand...
Click to collapse
I use it at night or in places that I need fast internet and when I know I dont need a phone for a bit which is why I have voicemail I just switch over to LTE for a bit and then back...but yes it sucks for now until they upgrade the tower over here with the feature needed to use LTE spark devices.
Im loyal to sprint but its becoming more and more hard to be loyal.
Probably just your area, not the phone.
Your area may have LTE but if it doesn't have the circuit fall back enabled yet (tri-band phones) can't drop the data to allow a call and thus they force you to remain on 3G only.
Once your area has everything done it should get better.
I have similar situation that KILLS my battery at home but in every other part of town it all works great :/
bryanu said:
Probably just your area, not the phone.
Your area may have LTE but if it doesn't have the circuit fall back enabled yet (tri-band phones) can't drop the data to allow a call and thus they force you to remain on 3G only.
Once your area has everything done it should get better.
I have similar situation that KILLS my battery at home but in every other part of town it all works great :/
Click to expand...
Click to collapse
Found out from reading the Sprint forums (https://community.sprint.com/baw/thread/157300?start=0&tstart=0), that this is likely not caused by the circuit fallback, but incomplete rollouts of Spark technology. Disabling the new Spark bands has helped me keep a stable LTE connection. Once the Spark rollout is complete in my area, and Band 26 can support both Voice and Data, I'll re-enable it the new spark bands.
sporklover said:
Found out from reading the Sprint forums (https://community.sprint.com/baw/thread/157300?start=0&tstart=0), that this is likely not caused by the circuit fallback, but incomplete rollouts of Spark technology. Disabling the new Spark bands has helped me keep a stable LTE connection. Once the Spark rollout is complete in my area, and Band 26 can support both Voice and Data, I'll re-enable it the new spark bands.
Click to expand...
Click to collapse
Which bands did you disable? Also, are you able to get voice calls when you LTE?
Im a bit frustrated be the place I spend most of my time (where I used to get LTE fine with my S3) I no longer get LTE and its super slow 3g. Calling sprint didn't help, they just say to wait until cell tower updates are finished in the next 6 months.
If I disable the Spart bands, will I be able to keep LTE and voice? Thanks
master4g said:
Which bands did you disable? Also, are you able to get voice calls when you LTE?
Im a bit frustrated be the place I spend most of my time (where I used to get LTE fine with my S3) I no longer get LTE and its super slow 3g. Calling sprint didn't help, they just say to wait until cell tower updates are finished in the next 6 months.
If I disable the Spart bands, will I be able to keep LTE and voice? Thanks
Click to expand...
Click to collapse
I disabled bands 26 and 41. This forces the phone to use the default sprint LTE band. It receives voice calls just fine.
sporklover said:
I disabled bands 26 and 41. This forces the phone to use the default sprint LTE band. It receives voice calls just fine.
Click to expand...
Click to collapse
But if you enabled the spark LTE bands like the default settings, will you LTE work or does it fall back to 3g? Thanks
master4g said:
But if you enabled the spark LTE bands like the default settings, will you LTE work or does it fall back to 3g? Thanks
Click to expand...
Click to collapse
LTE works fine because it defaults to the standard LTE band.
sporklover said:
LTE works fine because it defaults to the standard LTE band.
Click to expand...
Click to collapse
Then is there any benefit in disabling the other bands?
master4g said:
Then is there any benefit in disabling the other bands?
Click to expand...
Click to collapse
Read the sprint link. Incomplete rollout of spark, in particular on band 26 can cause the issue of not being able to switch between 4G and 3G and back.
Hi All,
I stumbled across this as I am currently not in the US to test this out. Could someone see if this actually works? It supposedly enables the LTE band 4 on this phone even though specs say that there's not LTE on it. I was hoping it would be there as it has the same hardware as the N9005.
According to the Service Mode on the N9002, you can enable VZW LTE Band 4. I believe T-Mobile also uses this band for their LTE. I enabled it for me, but I am currently in an area that I can't test it. I posted screenshots of the Service Mode, and a video capture going into the menu.
How to enter service mode:
1. At phone dialer, dial *#0011#.
2. At the service mode, hit the menu key, and select back. It looks like it did nothing, but go to the next step.
3. Hit the menu key again and select "Key Input" and type "Q". It looks like it did nothing, but go to the next step.
4. Hit the menu key again and select "Key Input" and type "0000" (zeros).
5. Wait until you see "Main Menu"
6. Select [3] LTE
7. Select [2] LTE RF
8. Select [1] VZW LTE B4 on/off
9. Select B4 Enable(). It should now have an asterik in the parenthesis.
10. Reboot phone.
Here's a screen capture on how to enable it.
Enable VZW LTD Band 4 on Galaxy Note 3 Dual Sim SM-N9002
youtu.be/-KQWaJuwOrg
If anyone can confirm this works, I'd really appreciate it.
Thanks.
Monkichi57 said:
Hi All,
I stumbled across this as I am currently not in the US to test this out. Could someone see if this actually works? It supposedly enables the LTE band 4 on this phone even though specs say that there's not LTE on it. I was hoping it would be there as it has the same hardware as the N9005.
According to the Service Mode on the N9002, you can enable VZW LTE Band 4. I believe T-Mobile also uses this band for their LTE. I enabled it for me, but I am currently in an area that I can't test it. I posted screenshots of the Service Mode, and a video capture going into the menu.
How to enter service mode:
1. At phone dialer, dial *#0011#.
2. At the service mode, hit the menu key, and select back. It looks like it did nothing, but go to the next step.
3. Hit the menu key again and select "Key Input" and type "Q". It looks like it did nothing, but go to the next step.
4. Hit the menu key again and select "Key Input" and type "0000" (zeros).
5. Wait until you see "Main Menu"
6. Select [3] LTE
7. Select [2] LTE RF
8. Select [1] VZW LTE B4 on/off
9. Select B4 Enable(). It should now have an asterik in the parenthesis.
10. Reboot phone.
Here's a screen capture on how to enable it.
Enable VZW LTD Band 4 on Galaxy Note 3 Dual Sim SM-N9002
youtu.be/-KQWaJuwOrg
If anyone can confirm this works, I'd really appreciate it.
Thanks.
Click to expand...
Click to collapse
I would like to try but i´m on lte band 3 (sweden).
should i try the same way?
tommie.r said:
I would like to try but i´m on lte band 3 (sweden).
should i try the same way?
Click to expand...
Click to collapse
I tried this on the N9002; Dual Sim variant.
If you have a different version, this might be better for you as I didn't have a custom kernel for mine.
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
I just ran the process and my phone rebooted without problems (N9005). Now, I just have to get an LTE sim card for a network that runs on those bands (I'll try to do it on this weekend and confirm if it worked).
Sent from my SM-G900F using XDA Free mobile app
Monkichi57 said:
I tried this on the N9002; Dual Sim variant.
If you have a different version, this might be better for you as I didn't have a custom kernel for mine.
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
We have the same phone, sorry I didn't mention that. I'm running a custom rom, witch I guess is only an advantage... But you enabled lte band 4 and in Sweden my carrier has band 3. I checked the other "how to" but it seems a little bit complicated and I'm a little bit worried about messing things up.
Sent from my SM-N9002 using XDA Free mobile app
tommie.r said:
We have the same phone, sorry I didn't mention that. I'm running a custom rom, witch I guess is only an advantage... But you enabled lte band 4 and in Sweden my carrier has band 3. I checked the other "how to" but it seems a little bit complicated and I'm a little bit worried about messing things up.
Sent from my SM-N9002 using XDA Free mobile app
Click to expand...
Click to collapse
It should be fine. I've done it a couple of times and it rebooted fine and connected to the area cell signals, just the area i'm currently in doesn't have any LTE.
Monkichi57 said:
It should be fine. I've done it a couple of times and it rebooted fine and connected to the area cell signals, just the area i'm currently in doesn't have any LTE.
Click to expand...
Click to collapse
Ok i´ll give it a go when i have cofimed my sim works with lte...
tommie.r said:
Ok i´ll give it a go when i have cofimed my sim works with lte...
Click to expand...
Click to collapse
Did you manage to activate lte band 3 frequencies?
I have a n9002, but i'm in Italy and VZW LTE Band 4 are not used here.
Thanks
niofar said:
Did you manage to activate lte band 3 frequencies?
I have a n9002, but i'm in Italy and VZW LTE Band 4 are not used here.
Thanks
Click to expand...
Click to collapse
I haven't gotten round to it yet, I have been far too busy with more important things...
Sent from my SM-N9002 using XDA Free mobile app
I tried here in mexico. Telcel ,Movistar, and Nextel both use band 4 for LTE. Did not connect, only H+, but also there is no menu option to switch to lte only wcdma and gsm.
rotorheadman said:
I tried here in mexico. Telcel ,Movistar, and Nextel both use band 4 for LTE. Did not connect, only H+, but also there is no menu option to switch to lte only wcdma and gsm.
Click to expand...
Click to collapse
I don't have a way to try it right now(my n9002 is at a repair shop atm), but would you mind trying this? the article says to modify the /data/property/ persist.radio.lteon file to "true" and “LTE/WCDMA/GSM (auto connect)” should show up as a selection of network preference. Can you let me know what your results are when you try it?
//smokeys.wordpress.com/2014/04/06/how-to-enable-lte4g-on-samsung-galaxy-note-3-sm-n9005/
Sorry for the long wait, wife had phone. The file was already set to true. No lte option in Network Mode menu.
Thanks for trying. I realized that my bootloader is locked so I can't flash a permissive kernel. I think that would've been able to do it I think... oh well
My SM-N9005 was crahed 4G/LTE when i test that... even if I disable, my 4G not working now
How I can deblock that ?
http://forum.xda-developers.com/showpost.php?p=59934217&postcount=1
OT
I try this and I still have only 3G/H+ on n9002.
Probably Samsung does not include LTE Modem
Poslato sa pisaće mašine Note 3 dual sim
............ ¯\_(ツ )_/¯.............
I did all your steps. But in RRC (Service mode, main page) i'm still see "RRC: IDLE, Band5" and i don't connect to band4. I checked and that band is activated.
Why?
Compiled from FCC information and Wikipedia for two of the Moto E LTE models:
FCC ID IHDT56QC8 (XT1528) -
This LTE transceiver supports high-speed wireless data communications within LTE Bands 2, 4, 5, and 13, with channels up to 20 MHz in bandwidth.
FCC ID IHDT56QC7 (XT1527) -
This LTE transceiver supports high-speed wireless data communications within LTE Bands 2, 4, 5, 12, 17, 25, 26, and 41, with channels up to 20 MHz in bandwidth.
From Wikipedia:
2 = 1900Mhz (PCS)
4 = 1700Mhz (AWS)
5 = 850 (Cellular?)
12 = 700 a
13 = 700 c
17 = 700 b
25 = 1900 g
26 = 850 (SMR?)
41 = 2500 (old WiMax)
So, the Verizon model (1528) will technically support LTE on AT&T and T-Mobile bands 2 & 4. It has all three Verizon LTE bands (obviously) - 2, 4, 13. You would be missing LTE on AT&T band 17 and LTE on T-Mobile band 12.
The other model (1527) will support LTE on AT&T in 2, 4, and 17. Will support Sprint on 2, 25, 26, and 41. Will support T-Mobile on 2, 4, and 12. Technically it might also support Verizon on 2 and 4. (Verizon is currently using 4 as part of XLTE in certain markets, and I don't know if think are running LTE on 2 at all. )
It appears that the 1527 model is the better one to get for band coverage, unless you want Verizon LTE on band 13.
Found a third model. From FCC docs:
FCC ID: IHDT56QC1.
This mobile device is also equipped with an LTE transceiver. This LTE transceiver supports high-speed wireless data communications within LTE Bands 2, 4, 5, 7, 12, and 17, with channels up to 20 MHz in bandwidth.
This particular variant will work on LTE on AT&T in bands 2, 4, and 17. It will work on LTE on T-Mobile in 2, 4, and 12. It will work on Verizon's LTE on 2 and 4, but is missing Verizon's core band 13 (700c). Not sure which provider is using it with on band 5 (850). This model apparently (compared to QC7) is missing the Sprint LTE bands completely (25, 26, 41).
acadiel said:
Not sure which provider is using it with on band 5 (850).
Click to expand...
Click to collapse
AT&T uses LTE band 5 in certain rural areas
Does the Verizon XT1528 support GSM bands?
All postpaid Verizon 4g lte have UNLOCKED GSM bind if I am correct. Has Verizon been able to block GSM bands in the Moto E 2015?
I have been trying to figure this for last couple of days.
Thanks
Yes Verizon Moto e 2015 Comes international unlock for GSM/CDMA Sim.
samratunlock said:
Yes Verizon Moto e 2015 Comes international unlock for GSM/CDMA Sim.
Click to expand...
Click to collapse
the Verizon Moto E 2015, sadly ISN'T internationally unlocked, i currently have two and they won't connect to my GSM netwrok . I'd assume this is also the case for domestic USA networks
i also having verizon model
works with indian gsm carrier.
wow!!! this is the break-through i've been waiting for, how did you get the device to work on a gsm carrier?
interkaiser said:
wow!!! this is the break-through i've been waiting for, how did you get the device to work on a gsm carrier?
Click to expand...
Click to collapse
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
samratunlock said:
i also having verizon model
works with indian gsm carrier.
Click to expand...
Click to collapse
This intrigues me as well. Airtel, the most popular carrier in India, runs GSM 1800,900 UMTS 2100 LTE 40 (2300). The VZW Moto E according to the RF Exposure Report on the FCC for IHDT56QC8 says that the Moto E only supports CDMA 1900,850 GSM 1900,850 UMTS 1900,1700,850 LTE 2 (1900), 4 (1700), 5 (850), 13 (750). That would mean that there is no way that a VZW Moto E would run on Airtel. Does the phone support more bands than are listed in the FCC filing or did you do something else like flash a different baseband?
JasonPro11 said:
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
It worked!!!!!!!!!!!!!! thank you so much
Click to expand...
Click to collapse
XT1528
interkaiser said:
JasonPro11 said:
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
It worked!!!!!!!!!!!!!! thank you so much
Click to expand...
Click to collapse
Hi guys. Help. I am in Ukraine, I bought XT1528 put "4G Switcher" GSM but I have not earned. What will advise?
Click to expand...
Click to collapse
LTE/CDMA to GSM/WCDMA Sim card
Thanks for the advice, It worked with app "4G LTE Switch", BUT the sim card is still not recognizable, I mean it says Sim card is not from Verizon. Luckily the phone and the SIM card are working now. Thanks again my friend
JasonPro11 said:
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
This intrigues me as well. Airtel, the most popular carrier in India, runs GSM 1800,900 UMTS 2100 LTE 40 (2300). The VZW Moto E according to the RF Exposure Report on the FCC for IHDT56QC8 says that the Moto E only supports CDMA 1900,850 GSM 1900,850 UMTS 1900,1700,850 LTE 2 (1900), 4 (1700), 5 (850), 13 (750). That would mean that there is no way that a VZW Moto E would run on Airtel. Does the phone support more bands than are listed in the FCC filing or did you do something else like flash a different baseband?
Click to expand...
Click to collapse
Will the boost variant work on net10 byop at&t towers
Sent from my N800 using XDA Free mobile app
If I unlock this phone,
Will calls and Sms work fine over 3G/2G networks?
For example: Tmobile or AT&T.
JasonPro11 said:
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
Click to expand...
Click to collapse
Appreciate the warning, but there is a simple workaround I just accidentally did this and the radio was disabled, but if you set 'LTE/GSM' in the app, and then go into normal 'settings -> Wireless & Networks -> More -> Cellular networks -> Network Operators -> Choose Automatically' will bring back auto selection.
reliance cdma dat working
samratunlock said:
i also having verizon model
works with indian gsm carrier.[/QU
Sir, Let me confirm that Moto E2 verizon model works on indian CDMA like Reliance with EVDO data
and Wifi . Please enlight me with clear details on Reliance CDMA data.[/SIZE]
Click to expand...
Click to collapse
SURESH1770 said:
samratunlock said:
i also having verizon model
works with indian gsm carrier.[/QU
Sir, Let me confirm that Moto E2 verizon model works on indian CDMA like Reliance with EVDO data
and Wifi . Please enlight me with clear details on Reliance CDMA data.[/SIZE]
Click to expand...
Click to collapse
One silly question Reliace cdma with 3g data.. where is it available?
Is it there in Andhra Pradesh or Tamil nadu or karnataka?
Click to expand...
Click to collapse
Harish_Kumar said:
SURESH1770 said:
One silly question Reliace cdma with 3g data.. where is it available?
Is it there in Andhra Pradesh or Tamil nadu or karnataka?
Click to expand...
Click to collapse
RELIANCE CDMA EVDO DATA available in Tamilnadu. not 3g..
pls let me confirm work wifi hotspot with data
Click to expand...
Click to collapse
I was wondering if you were able to find a solution for the settings to stick after each reboot??
Thanks in advance
unlocking my bootloader please help
heres the strain of numbers if gave me or can someone email me i need help with unlocking my bootloader and rooting
9900054517528400#5441313034304258365900585431353238000000#9D541D95274C5C9106ACBCBB74377E3150881F95#924C6908000000000000000000000000
How to speed up jio connection?
I am posting pre configuration also as well as in case pre configuration not work you can try at your own hit and trial method.
Pre config -
I am not providing any downloadable files or content. This process needs root and volte supported roms. Custom lineage and its based roms still can have issue. It will work best on eui roms ( stock and customs) .
App need -
Net guru (free) - download
1. Download net guru app. And give root access . It will take some time for configuration.
2. Wait untill it shows LTE testing.
3. Now go to menu and select lock bands.
4. Now select LTE and select "B3 1800+" band.
5. Restart and. Enjoy new speed.
Reason to lock only this band -
Coverage + speed too.
Check speed by trai app.
If above method don't work then follow till 3rd step and now select 3 individual bands at which jio works and check your speed at individual bands and lock them at your most preferable band.
Details about bands:
Jio is using 3 LTE bands for 4G:
Band 3 (1800Mhz),
Band 5 (850Mhz)
and Band 40 (2300Mhz)
If LTE Bands are arranged according to services then
Best 4G coverage*: Band 5 > Band 3 > Band 40
Best 4G Speed*: Band 40 > Band 3 > Band 5
Average 4G speed*: Band 40 : 30mbps+Band 3 : 14mbps+Band 5 : 5mbps+
Extra -
1. After Deleting app band locking still works.
2. Restarting doesn't affect band locking.
3. Updating roms or changing also not affect band locking.
4. It's not necessary band 3 will give you more speed or coverage try according to your area. Mine is most suitable at B3.
Working - Sim - up. Working in Delhi, haryana and up.
Post your results.
Thank you bro
If you will use this trick then you both incoming and outgoing call will not work at the time of data connection ,you have to switch to flight mode to enable again
rockingboy said:
If you will use this trick then you both incoming and outgoing call will not work at the time of data connection ,you have to switch to flight mode to enable again
Click to expand...
Click to collapse
No issue here. Receiving calls and everything working fine.
i just got this phone from visible, of course it comes unlocked but it only has some of the bands needed for lte service on att. i was curious if anyone has tried this phone on att and tell me how good lte is with just a few of the bands
Google camera for zte blade a7 prime
Even I got this phone through visible, but was wondering if gcam can be installed in this?
It is lacking almost all of At&t bands. Most likely you are on band 2.
quote from sd
To whomever is trying to configure the ZTE Blade A7 to work voice/text, use a network app like "Mobile Network Mode" to force it to select different type of network.
1. Go to the app, select "Force Mode"
2. Set Preferred Network Type: either "GSM Auto" or "LTE/UMTS auto"
This should enable you to make voice call or text both incoming & outgoing.
I had success doing this for my CricketWireless. When doing voice call, it switches to 3G mode.
You must setup your regular APN to have 4G LTE enabled.
Click to expand...
Click to collapse
I have mine on T-Mobile and it works perfectly after popping in a different SIM to add the TMOB APN.
But it wouldn't make a great DD, because while TMOB Band 4 support is fine where I am, I know from experience that it's pretty spotty elsewhere.