Related
Gingerbread on Droidx has broken my wifi tether. When attempting to enable wifi tether the default (vzw/moto) 3g tether app comes up in notification area. Anyone have any solutions? If/when I find the solution is will update this post.
Thanks
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
I figured out how to fix it. The Team black hat patcher works.
1. Download the file below (from your phone probably easiest)
2. Launch DROID 2 BOOTSTRAPPER which can also be downloaded from below.
3. Bootstrap recovery
4. Reboot recovery
5. Install zip from SDcard
6. If using the default Android browser, the file will be in /download
7. Install the zip
8. Reboot phone, launch 3g hotspot (Wireless Tether for Root users not necessary)
9. Enable 3g, connect with computer/laptop/nook/tablet
10. Enjoy free 3g!!!
Downloads:
1. Team Black Hat Patcher
2. Team Black Hat Unpatcher
3. Droid 2 Bootstrapper
I take no credit for any of this! I just put it together and followed directions. All thanks goes to Koush, P3Droid, Team Black Hat, etc...
Deleted.
sdf
Anyone else can confirm this working?
Brenardo said:
Anyone else can confirm this working?
Click to expand...
Click to collapse
I updated the OP. Works great for me!
why does using the stock app make me nervous
faber78 said:
why does using the stock app make me nervous
Click to expand...
Click to collapse
LOL. Probably because VZW is big and scary and their favorite color is red. All they want from their customers is blood!
LOL. More info on how this works can be found here:
http://www.mydroidworld.com/forums/android-hacks/5156-tbh-droid-3g-hotspot-nvram-hack.html
Here's their explanation:
This thread is intended to explain the principles behind tethering and how to use RadioComm to modify the NVM to allow tethering via all methods
on any Motorola Droid device by all users, regardless of whether they are rooted or not.
This is the method we at TeamBlackHat used to create the Tether_Repair patches that were released recently for rooted DX/D2 users in update.zip format
and applied via the Koush bootstrap recovery.
It is based on years old knowledge developed in the early days of CDMA Motorola hacking on the V710/V3c/e815 devices.
All of the information, techniques and software tools to do this are in the public domain already.
What we did is simply take that knowledge and apply it with the latest Service software and methods to the Droid generation devices and packaged it
in a new format for delivery that was never previously available to us before the advent of Android.
We will be releasing the manual method for RadioComm when we have worked through all the details for doing it on Win 7.
Currently the versions of RadioComm available on the net are for Win XP only.
We did it initially as a Proof of Concept of methods for writing to NV items via update.zip using Motorola's own binaries that we have recently developed.
We were not intending to release it at all and all agreed that it would be very controversial and raise many ethical questions as well as attracting the wrong
kind of attention to us as a group at a time when we had just been served a C&D for leaking the 2.3.9 update.zip file.
All of this really came about as a direct result of the examination of the NVM we did investigating nenolod's claims about an Engineering mode "switch"
that unlocked the bootloader on DX/D2. Those claims turned out to be unfounded and false and our work, and in particular MotoCache1's incisive analysis
of the boot process with help from [mbm], was instrumental in revealing that fact.
Not exactly what we had in mind to do but we were among the few who had the tools and wherewithall to determine the validity of what nenolod was claiming,
particularly in the beginning when he had released very little hard data to back up his suggestion that there was such a string hiding in the NVM.
Nonetheless, while revisiting the NVM and exploring methods to dump the memory we came upon this set of NV items that determines how the radio builds the
authentication strings it autowrites at bootup for data services. I was aware of their existence for month's since they were revealed in a thread
I participated in on HoFo for service programming on the original Droid. That thread was directed towards the methods required to get the Droid on
a different carrier like Cricket or Metro.
In any event, I knew what they would do if modified in this way and decided to use that as a test of MotoCache1's work with the update.zip binaries.
I used RadioComm to edit them individually and MotoCache1 did the really brilliant work of turning this very old school hack into a beautiful,
elegantly delivered package. This proved the power of what we were capable of as a team and we still unanimously decided against releasing
a packaged theft of services hack as not the right thing to do.
We have reconsidered now in the light of these other exploits surfacing which utilize various software level tricks for getting "Free" tethering
with the new 3G Mobile Hotspot app included on DX and D2. I had always felt that this was inevitable and that others would soon put the pieces together
in the same way we had done.
This is a fundamentally different modality but accomplishes exactly the same thing as any other exploit designed to subvert VZW's intent
to differentiate between externally routed modem data and internal data use and charge for that service.
This includes all forms of exploits and applications like PDAnet and WMWiFiRouter(WinMo 6.1) and now Barnacle, whose entire business model is to use
software level methods to mask tethered data and have marketed them as such for years.
All of these methods absolutely violate the TOS agreement with VZW.
This method simply alters that behavior at the lowest level possible on the device, the radio NVM.
It works because of the way VZW chose to setup authentication on their network when they released the first EvDO capable phones in late 2004-2005.
The methods and software tools to access the NVM as well as the blocks put in place by Qualcomm and Motorola for protecting these
authentication components have evolved dynamically over the years with advancements in chipset design and software, but the principles
have always remained the same. Hex editing the NVM items via a given tool to make the Tethered NAI(Network Access Identifier) strings
match the NAI strings for internal data.
These are basically your user name on the network and consist of the MIP profile byte, a line length byte and your 10 digit telephone number
followed by either @dun.vzw3g.com for tethered NAI or @vzw3g.com for the NAI. By removing the "dun." from the tethered NAI string
you enable all forms of data use to appear to the network as internal and using the normal NAI string.
The difference between the current technique and former methods is that the items edited for this hack are not those strings themselves,
but actually where the default values are stored that the radio uses to build the full strings that it autowrites to the fixed, protected locations in the NVM
for the authentication components in the MIP(Mobile Internet Protocol) profile itself, which happens at bootup.
This is the means by which they prevented the items from being modified by typical service programming tools like QPST.
But, because we know the location for those hidden partial strings, it actually makes our work much simpler.
After editing these four strings, the phone itself uses those values to autowrite the properly configured MIP profile strings for you.
It couldn't be any easier!
Despite our initial concern about releasing this publicly, we have decided after much discussion to do so anyway.
With all of the recent exploits that are directly targeting the 3g Mobile Hotspot app we feel that revealing the way to do it properly
will level the playing field for everyone as well as giving the community a truer and more complete understanding of how it works.
This way users can make up their own minds as to whether to use any of the available methods of "free" tethering with a clear view
of the ethical and technical issues involved.
Hopefully this thread will generate a healthy discussion about the issues.
We at TeamBlackHat believe in providing the knowledge so users can make their own decisions with the best information available.
Please use your own judgment about whether to use this or any tethering modifications.
Enjoy!
Click to expand...
Click to collapse
So can anyone else confirm this working? Besides snwagner?
Works perfectly.....
Been using TBH's 3G hotspot patch since they released it. Worked fine on Froyo and fine now on GB
Works perfect did it before and after gb leak
Sent from my DROIDX using XDA Premium App
Works for past 4 months no extra on vzw bill either
Beamed from my Gingerbreaded DroidXtreme
Works for me.
Followed the steps, still no go...
I came from Liberty 1.5 and used the wifi tether for root with no problems. I followed the steps and installed the Tether Patcher. My laptop can get an IP address from the phone but I cant do anything more than that. Any Ideas?
I am having the same issue with the tether patch. I get an ip address, but no data comes through (tried on multiple computers). I, however, did not come from liberty - stock rom / (but rooted, obviously).
+++edit to add+++
When I first upgraded to GB, I installed the Android Wifi Tether app (3.0-pre12). That didn't work correctly (both the wifi app and hotspot app icons came on in the tray and it was really buggy), so I uninstalled the wifi app and applied the patch. The patch, as I said, would assign an ip but not transmit any data. So, I just reinstalled the tether app (with the patch still applied) and it works! Now only the stock icon appears in the tray and it works faster than ever. Using it as I type.
wifi tether app: hxxp://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_0-pre12.apk&can=2&q=
bndggle said:
I am having the same issue with the tether patch. I get an ip address, but no data comes through (tried on multiple computers). I, however, did not come from liberty - stock rom / (but rooted, obviously).
+++edit to add+++
When I first upgraded to GB, I installed the Android Wifi Tether app (3.0-pre12). That didn't work correctly (both the wifi app and hotspot app icons came on in the tray and it was really buggy), so I uninstalled the wifi app and applied the patch. The patch, as I said, would assign an ip but not transmit any data. So, I just reinstalled the tether app (with the patch still applied) and it works! Now only the stock icon appears in the tray and it works faster than ever. Using it as I type.
wifi tether app: hxxp://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_0-pre12.apk&can=2&q=
Click to expand...
Click to collapse
Thanks! I Installed the Android Wifi Tether app and managed to get it working too. Initially after installing the Wifi Tether, it would get an IP, I could ping the gateway but still couldn't get to the outside world even though the computer said it had internet access. (incidently I would also have both the wifi and builtin app icons in the tray). What worked for me was to enable access control and then disable access control. Now I have just the Wifi Icon in the tray and Im using it flawlessly right now.
After a reboot, I do have both icons in the tray again but it still works without issue. That works for me!
In order to get the stock tethering app working I had to change my dns servers.
I was in the same boat as bndggle. Tryed his fix and nothing happened. The only thing that worked before I tried his fix and after is just leaving the tether running. After a few min I will get a message on my status bar saying that my 3g connection failed. I lose 3g, then it returns and I magically have internet access.
An other thing I noticed is that when I start the tether not only is the host not connected to the internet, the phone is also.
I don't get the point of this when you can just download the wireless tether app from the store for free. What's the difference? OR is the reason that people are using this method because the wireless tether app doesn't work on GB? if that is true, than I'll stay with froyo until that gets fixed in the OTA release of GB.
do you patch , and unpatch???? or just patch... i tried to patch, and the tether still does not work... any suggestions
iammebane said:
do you patch , and unpatch???? or just patch... i tried to patch, and the tether still does not work... any suggestions
Click to expand...
Click to collapse
Uninstall the Android Wifi Tether app (3.0-pre12) and reinstall. Then reboot. Thats what worked for me. I have not removed the patch.
!!! updated 12/28/2012: add code to detect and use mobile hotspot to enable sharing among devices !!!
I'd like to invite people to participate an open testing session for app "PeerDeviceNet - sharing thru WiFi and WiFi-Direct".
It runs on android 2.2 and above. It is free at google play:
https://play.google.com/store/apps/details?id=com.xconns.free.peerdevicenet
I have done tests using Nexus 7, Samsung Tab 2.0, Kindle fire(1gen), Galaxy Vibrant. I'd like more complete coverage of devices and vendors.
It supports 4 kinds of device-device connections:
1. for devices at the same wifi net: start PeerDeviceNet at devices simultaneously will allow them find and connect to each other automatically.
2. for devices which are all wifi direct enabled: from system preferences, you can setup wifi direct group connection; PeerDeviceNet will pick up this group info and connect devices in group automatically.
3. if only one device is wifi direct enabled: you can use PeerDeviceNet to create a softwareAP/hotspot at this device (PeerDeviceNet->Connection settings->Create wifi direct hotspot), other wifi devices can use generated ssid and passphrase to connect.
4. for devices with mobile hotspot, you can use mobile hotspot to connect devices and enable sharing.
It extends android's "share/send" feature to allow sharing of the following data:
1. photos/videos (single or multiple) (gallery), audios(astro, solid-browser, or other browsers)
2. web pages (browsers)
3. contact info(Contacts)
4. pdf, word docs (astro or other file managers)
5. apps (google play)
I'll highly appreciate it if you can spend some time installing the app and try out some of the above scenarios. If you encounter Force Closure, please post your device info, android version, or ROM info.
Thanks!
This works fantastically between all of my devices, ranging from Ginger Bread, Honey Comb, and Jelly Bean.
WiFi hotspot also works very well.
This really is a handy app, something like this should definitely be implemented into base Android. Sharing files between devices that have NFC is a breeze, but legacy devices can be troublesome. This is an excellent solution for both worlds.
downloading
looks good
Installed and gave it a test drive.
Works perfectly on our Galaxy S III, Galaxy S II, Galaxy Tab 10.1, Xperia X8, Packard Bell Liberty Tab G100 and Wildfire S - after adding the devices manually. For some unknown reason they don't see each other, though the local LAN has no restrictions put into place.
Hi, I´ve been testing this between SGN2 N7100 (Stock Rooted) and MyTouch 4g Slide (CM9.1 R8) and it works great (no FC etc.)
I have several questions though:
a) I´d like to buy you a beer. There is a paid version but that one is far behind the free one in updates...
b) chat works great (as long as I have signal. but within a flat its mostly great). Will there be an implementation into the full version?
c) if I buy the full version, will you be updating it?
Thanks! Keep it up!
EDIT: seems to me that your app fights with anyconnect VPN (even if that one is running in background I get FC from anyconnect and superuser permissions asked all time... I´ll look into the behavior a bit closer if I find some time) else everything works good.
EDIT: after reinstall of anyconnect it works flawlessly. Keep it up!
File Expert by Geek Software Technology
I have been using File Expert to do similar things... perhaps I don't understand this program's full benefits or potential. FE also connects via bluetooth and runs both a web and FTP server.
It would be nice if you implement an option to close the app...
Option to close the app.
paul1508 said:
It would be nice if you implement an option to close the app...
Click to expand...
Click to collapse
Agree with that. It's quite painful to close an app by going into settings instead of hitting some button from the home interface.
Testing now
Downloaded and tried it..
I have a GS3 that it seems to work on, and a Nook color (the original one) from like 2 years ago running CM7 that it just gives a black screen on. I can use the regular wifi connect from the Nook and connect to the hotspot from your PeerDeviceNet but there's no sharing of data back and forth, unfortunately. If the app worked on both I'm sure it'd be much better, but I don't suspect the older Nooks will be a big percentage of your users.
issues related to peer discovery
B.Jay said:
Installed and gave it a test drive.
Works perfectly on our Galaxy S III, Galaxy S II, Galaxy Tab 10.1, Xperia X8, Packard Bell Liberty Tab G100 and Wildfire S - after adding the devices manually. For some unknown reason they don't see each other, though the local LAN has no restrictions put into place.
Click to expand...
Click to collapse
Thanks for your feedback. The failure to see peer devices in LAN could be related to one issue i fixed in the latest release; please give it a try.
Also PeerDeviceNet's "search and connect" is based on peer-peer "pairing": no one is acting as server and waiting for other clients. All participating peer devices must start search at same time or in same short time period so that they can find each other. If one peer finished its searching when a new peer starts searching, the new one cannot see the one just finished. It is for security reason.
Regards
Yigong
XCONNS LLC
a) I´d like to buy you a beer. There is a paid version but that one is far behind the free one in updates...
b) chat works great (as long as I have signal. but within a flat its mostly great). Will there be an implementation into the full version?
c) if I buy the full version, will you be updating it?
I am working on refactoring code and bug fixing for the full edition. Thanks for your feedback.
Regards
Yigong
XCONNS LLC
compare to file expert
eonix said:
I have been using File Expert to do similar things... perhaps I don't understand this program's full benefits or potential. FE also connects via bluetooth and runs both a web and FTP server.
Click to expand...
Click to collapse
File expert is a powerful browser with many nice features. PeerDeviceNet is a totally different creature.
As a app, it plainly extends android native "sharing" protocol (send/send_multiple) to connected devices, to allow you share content from one device to another. (As a framework, it provides the components and runtime to support connected mobile apps). It has minimal GUI to support connecting devices and monitoring send/recv sessions. It has strong support for connecting multiple devices, run multiple concurrent send/recv sessions, and running in background.
So normally you will use your favorite apps to browse/view content, and when you want to share the content with another device, you hit "share" button and PeerDeviceNet will be there to help connect to other devices.
So you can use Astro file manager or Solid explorer with PeerDeviceNet to share files across devices similar to file expert.
Also PeerDeviceNet allows you share contact info, web links, or apps from google play to connected devices.
Regards
Yigong
how to close it
xbroadcaster1991 said:
Agree with that. It's quite painful to close an app by going into settings instead of hitting some button from the home interface.
Click to expand...
Click to collapse
There is "shutdown" button for that : "Connection settings" -> "Shutdown". It will shut down all background services and clean up notifications.
Regards
Yigong
peerdevicenet said:
There is "shutdown" button for that : "Connection settings" -> "Shutdown". It will shut down all background services and clean up notifications.
Regards
Yigong
Click to expand...
Click to collapse
Mmm, too many button presses to get there. It would be easier to have a "Shutdown" button in the notification shade. Otherwise well done! I tested sharing files between LG Optimus 3D (p920) and Xperia Mini (st15i) connected on the same LAN. Everything worked fine.
Can one add a function to "tether" a hotspot? but from wifi and not from 3g?
This would be really awsome.
Greets
Sent from my Xperia X10 using xda app-developers app
Yo so I got the full version. The lite is good but wanted to buy you a beer... Managed to transfer 4gb of data in few minutes between my and friends Samsung phone (unfortunately in 3 steps because of the data amount limit). Very useful, the chat also works good.
When will we see full version updated with chat and unlimited data transfer?
Thanks
Sent from my GT-N7100 using xda premium
tether to wifi router
keenofhiphop said:
Can one add a function to "tether" a hotspot? but from wifi and not from 3g?
This would be really awsome.
Greets
Not sure this will really help. because when connecting to PeeerDeviceNet hotspot, we already use wifi connection, so why not just connect to external wifi router directly?
Regards
yigong
Click to expand...
Click to collapse
unlimited capacity
Narhim said:
Yo so I got the full version. The lite is good but wanted to buy you a beer... Managed to transfer 4gb of data in few minutes between my and friends Samsung phone (unfortunately in 3 steps because of the data amount limit). Very useful, the chat also works good.
When will we see full version updated with chat and unlimited data transfer?
Thanks
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks for using PeerDeviceNet and offering beer. I am still working on the full edition. For now i removed the limit of transfer capacity. Please chek out the new release at google play. https://play.google.com/store/apps/details?id=com.xconns.free.peerdevicenet
Regards
Yigong
SonyVaio+Htc Salsa=possible?
While my sony laptop has wifi direct facility my htc salsa lacks one and just has traditional wifi and wifi hotspot facility...how do i connect bothe these devices for transferring the data to and fro?
Hi XDA,
I'm in development of a widget app and want to provide several functions like toggle Airplane Mode, Data Roaming, GPS etc.
As of API Level 17 Airplane Mode and Data Roaming have been moved to protected Settings.Global* and i dont know how i can provide my users this functionality.
I heard of some permission "WRITE_SECURE_SETTINGS" but appearently this is not the problems solution yet. Is it? - didnt work in Emulator
Has anyone experience in this and can explain me how i can i provide these functions, which seem to be protected?
Thanks,
Wambo92
* I'm not allowed to link outside, but this is what i wanted to link to:
developer.android.com/reference/android/provider/Settings.Global.html
Settings.Global is read-only. The only way that special permission will work is if you build the OS yourself.
New Global Settings
The system settings have been updated to support multiple users with the addition of Settings.Global. This collection of settings is similar to Settings.Secure settings because they are read-only, but applies globally across all user spaces on the device.
Several existing settings were relocated here from either Settings.System or Settings.Secure. If your app is currently making changes to settings previously defined in Settings.System (such as AIRPLANE_MODE_ON), then you should expect that doing so will no longer work on a device running Android 4.2 or higher if those settings were moved to Settings.Global. You can continue to read settings that are in Settings.Global, but because the settings are no longer considered safe for apps to change, attempting to do so will fail silently and the system will write a warning to the system log when running your app on Android 4.2 or higher.
Click to expand...
Click to collapse
zalez said:
Settings.Global is read-only. The only way that special permission will work is if you build the OS yourself.
Click to expand...
Click to collapse
Okay, so I'm just going to link to the settings and display the state whether its on or off in API Level 17 or higher in my widgets.
Anyway, i don't like googles decision to strictly restrict developers changing these settings.
Hi Guys,
Just a QUICK How-To that will allow you to use the Xfinity TV Go app to watch television episodes over 3G / 4G for non-Verizon users.
As you probably already know, due to a marketing deal between Comcast/Xfinity and Verizon Wireless, access to streaming episodes are disabled for all carriers except Verizon, unless you are on WiFi.
Fortunately, we have some very talented developers that have provided a solution!
This REQUIRES a valid Xfinity/Comcast subscription. If you have Xfinity/Comcast cable you should have a username and password to log in. If you don't know this information, you can initiate a "Chat" from the website, or call Comcast/Xfinity to retrieve your username and/or reset your password. Before you proceed, you should be able to successfully use the TV Go app over WiFi.
First, you must have a working Xposed Framework installation. I'm not sure if this will work with those of you using tethered root such as PIE, but assuming you are able to install Xposed and soft-reboot, it should work. It -definitely- works for anyone with an unlocked bootloader.
Installing Xposed is pretty straightforward, and it is described in other threads so we aren't going into that here. Once Xposed Framework is installed, you can proceed:
You will need to open Xposed, and click "download". This will list all the available Xposed modules. We are looking for a module called "Fake Wifi Connection". The easiest way to find it is by tapping the search button, and typing "Fake Wifi", at which point the module we are looking for should appear at the top of the list. Install the module, then go back to "Modules" in Xposed. Enable the module by checking the box next to "Fake Wifi Connection". This will require a reboot to complete. Once rebooted, open your app drawer and tap on "Fake Wifi Connection".
Unless you have reason to use this for other apps, I suggest you press the "invert" button, which will de-select all apps. Now scroll down the list until you find "TV Go", and place a check mark next to it. Make sure the master switch is set to on, and click "Save".
That's it! Now you can launch the TV Go app, and it will happily stream the episodes of your choosing (assuming they are included in your subscription) over non-Verizon 3G & 4G. If you have a slow connection, you may experience buffering, but this is to be expected in low-bandwidth conditions.
Enjoy! Now you can bypass Comcast/Xfinity's [stupid] Verizon-only restrictions when you aren't on WiFi.
Be sure to use caution if you are on a limited data plan, as video-streaming can consume a substantial amount of bandwidth in a relatively short period of time.
This could potentially allow you to use other apps that restrict you to WiFi-only use as well.
All thanks and credit goes to:
1. The Xposed Framework development team
2. "lemonsqueeze" - the developer behind the "Fake Wifi Connection" Xposed Module
I think I've run into this issue when running AOSP ROMs like CyanogenMod on some of my other devices (even though they were connected to Verizon's 4G LTE network still). Glad to see that there is a workaround.
I received build MRA58R today via official OTA. Device is unmolested (bootloader never unlocked). It was 702 MB and everything went very smoothly. The device is really snappy--I'm a happy big red customer!
Nice explanation of Marshmallow new features:
http://www.verizonwireless.com/support/google-nexus-6-update/
Here's the text from the link posted above.
Google Nexus 6 Software Update
[Updates]
Verizon Wireless is pleased to announce a software update for your device. This software update has been tested to help optimize device performance, resolve known issues and apply the latest security patches.
Before you download:
Connect your device to a Wi-Fi network, or make sure it has a strong Verizon Wireless network connection.
Ensure your battery is fully charged before starting the software update.
Current Software Update Benefits
Software Version: MRA58R
Verizon Wireless is pleased to announce a new software update for your Nexus 6. Android™ 6.0 Marshmallow improves your mobile experience with new battery-smart features and enhanced app permissions that give you even more control.
Now On Tap: spot-on answers, fast
Now on Tap, a new feature powered by Google™, helps you stay on task by instantly pulling up relevant information, like driving directions and restaurant reservations, letting you get more done.
A battery that works smarter, not harder
Android Marshmallow's new battery features help your device retain its charge longer.
Doze: When your device is at rest, Doze automatically puts it into a sleep state, but will still allow all your alarms, notifications and calls to ring through.
App Standby: Your seldom-used apps will go into App Standby in order to conserve battery power for the apps you use more often. If an app hasn't been used for several days, its power consumption is reduced to zero. Apps will come out of App Standby immediately once you interact with them.
New app permissions
You now have specific control over what info you share - no more all-or-nothing access. Android Marshmallow lets you define what you want to share and when.
Simplified app permissions
Permission requested only when relevant
User controls to turn on/off any permission, at any time
Link apps without a prompt
Android has always let apps register themselves to handle web URL links. With the new app links feature, the transitions between apps are even more seamless. The platform can determine the default app to use for a particular web link and skip prompting users to select an app.
For example, clicking a LinkedIn connection request in an email could automatically launch the installed LinkedIn app to complete the action, instead of showing the user a disambiguation dialog or launching a web browser.
Direct Share
The Direct Share feature lets users share content directly to targets, such as contacts, within other apps. Previously when sharing content via the Share menu, the user would have to go through a two-step process. First, choose the destination app and then choose the target, such as particular contacts, within the destination app. But apps can now define direct share targets that launch a specific activity that is directly exposed to the user via the Share menu.
For example, the direct share target might launch an activity in another social network app, which lets the user share content directly to a specific friend or community in that app.
Text selection & text editing
Selecting text is easier in Android Marshmallow, with word-by-word forward selection and character-by-character backward selection for increased precision.
After you select the text, actions such as Copy, Share, and Search are shown in a floating toolbar above the selection. When you use an external keyboard to edit, you can use Ctrl-z and Shift-Ctrl-z to undo and redo changes.
Easier device migration with Auto backup for apps
When apps are installed on a new device or an existing device that's been factory reset, they automatically retain previously associated user data. Account information, settings, game scores, and even the layout of the launcher are restored. Default app settings, sync settings, and keyboards are also automatically backed up and restored on new devices.
Simple notifications and volume control
Android Marshmallow adds a Do Not Disturb feature (formerly Priority) with improvements to the design, including:
None/Priority/All are now activated with simple on/off switch.
Clearer options such as Total Silence, Alarms only and Priority.
More precise control of Priority modes, such as for repeat callers, and also by notification category, and starred contacts.
Additional rules flexibility, including those based upon events or with a custom duration.
Each sound stream can now be individually controlled.
Peeking Notification (formerly Heads-up Notification)
Has smoother animations and the ability to configure the behavior of each app.
Next steps and additional links:
Please allow additional time for the apps on your device to continue to download after the software update.
Operating System FAQs
Previous Software Update Benefits
Related
View Software Version - Nexus 6
[Device-Specific Instructions]
How to Use Guide: Verizon Cloud
[How to Use Guide]
Get step-by-step instructions for how to sign up for and manage Verizon Cloud online. Learn how to upload contacts, pictures, videos, music, documents and more.
Advanced Devices - Software Updates
Click to expand...
Click to collapse
Mine is waiting for a WiFi connection before downloading. Verizon customer here..
If I don't see it by the weekend, I'll flash it.
Which baseband version is this OTA? Just curious if it's the same 27R.
bond32 said:
Which baseband version is this OTA? Just curious if it's the same 27R.
Click to expand...
Click to collapse
Good question, thats what i wanted to know also, i assume the base is the same as everyone is using in their roms, or the roms might even have a newer marshmallow base
bond32 said:
Which baseband version is this OTA? Just curious if it's the same 27R.
Click to expand...
Click to collapse
Confirmed mine is 27R.
Ditto... 27R here, as well.
Can anyone let me know if they now are able to use the voicemail icon in the dialer after this update? I dont have this on pure nexus, but a friend with a nexus 6 that just took the OTA says it appears now
The voicemail icon in the dialer (it's actually in "recents") says my VM box is empty. The Verizon visual VM correctly shows what's in my inbox. All messages predate installation of Marshmallow (MRA58R). I'll test to see what a new message does and advise.
Result: VM in recents still shows empty. Verizon visual VM apparently overrides it (IOW, they don't both work). Does the VM in recents work OK on Verizon for non-Verizon Nexus 6's?