Related
Hello - I urgently need help with my Samsung Galaxy Tab.
I flashed a wrong PIT/PDA & what happened is:
- my Galaxy Tab does not reboot at all
- the flashlight in the back suddenly switched ON automatically
No matter how long I press the Power Button, the device switches off just for one second, and then the flashlight switches ON again - but no reboot.
I cannot get into download mode / when I try to use commands with Odin, it only says: error: device not found.
Odin does show my device ([COM:4]), it appears as: Added // only the download mode does not work!
When I tried to start SuperOneClick, trying to Unroot, it is stuck with: "Waiting for device"
Weirdly, though, my netbook does install the drivers automatically when I plug it in. Which means, my netbook can "read" the device.
Does anyone here know how I could make the extreme Hard Reset, without having to reboot?
--------------------------
If you think this post should rather go to the Developers section, please feel free to move it // I am thankful for any help
Have you tried connecting to it with ADB to see if you can reach it at this level (apart from with SuperOneClick)? Try installing the Droid Explorer application on your Windows PC and see if it will recognise your Tab. If it will you should be able to initiate a reset from the Droid Explorer UI. If it won't I would suggest that you are hard bricked and it will have to visit Samsung. Good luck!
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
QueenAmy said:
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
Click to expand...
Click to collapse
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
rotohammer said:
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
Click to expand...
Click to collapse
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
bdl1969 said:
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
Click to expand...
Click to collapse
lol, I'll get my cheap Chinese Tab cables this week and hack one up to test.
My guess is that Odin will only see the Tab when it is in download mode. Id try flashing it in that state and find out for sure. It sure cant hurt.
You went to your retailer?I have exactly the same problem!!
First of all - THANK YOU for having started this discussion.
Yes, I went to the retailer. My Galaxy Tab is with Samsung Technical Support now; will keep you posted.
To answer some earlier questions, yes ODIN did recognize my Tab; but the screen on the Tab remained totally black. Only this strange "flash" light on the back kept glowing.
rotohammer, if you really get to test what you mentioned before, I'd be interested to hear what happened - but, personally I would not recommend it, unless you are sure you want to risk completely ruining your dear Tab.
studio54 said:
You went to your retailer?I have exactly the same problem!!
Click to expand...
Click to collapse
I did ... and less than 2 weeks later ..
Update:
13-Jan-2011
Today noon I got a call from my retailer my Galaxy Tab was ready to be picked up & I was really lucky: my retailer said the repair would normally cost EUR 650.-
.. as I had damaged the whole mainboard ..
but as the Tab was less than 1 month old, they were so kind to do it w/in my warranty - so I did not have to pay for it.
I'm very relieved, as you can imagine.
Got my Galaxy Tab back with a brand-new mainboard, everything is working well &
I sure learned my lesson.
I will not flash the Galaxy Tab again.
Only because Galaxy Tab and Galaxy i9000 are both on Froyo, it does NOT mean that you can flash the same software!
I wanted to apply the 3 button combo fix on my Galaxy Tab but apparently it does not work!
Bricked mine as well, but mine is a weird case
I bring up the weirdest case of bricking so far, i was on an official Arabic (P1000JPJK2)Firmware, and i noticed a new Arabic release on SamsungFirmware.com (P1000JPJM3) i downloaded it and downloaded the .pit file, Started Odin v1.7 and unchecked repartition, selected the PDA and the pit and started the processes, odin finished and Reseted the device and give me the green light with the word PASS, however, the my p1000 decided to reboot into download mode automatically, so i rebooted the device manually and got stock in the Samsung Logo and keeps looping. so i decided to go back to my previous Rom but it will always fail and i would have to reboot my tab and it will show the good ol' Phon-PC logos, however, odin would see it and would flash anything i want. i tried flashing various versions of rom's but they would all fail... i tried repartition checked and unchecked and nothing worked, so lastly i decided to flash the .pit file alone and that worked and got me back to where i was stuck in the Samsung logo loop and no ROM would be flashed through Odin BUT the (P1000JPJM3) but it still will not boot! and funny enough i took it to sammy's repair shop and they told me to come pick it up in a few hours but they told me that they failed to repair it and they would need to keep it till tomorrow, but they guy was not that optimistic about getting it repaired and to make things worse i couldn't get unrooted so there is a good chance that there will be no warranty... does this mean that i bricked it for good? please help me.
The main Samsung Approved Service Center here in Kenya has just given up on my SGS 1900 UK Model Nov 2010, originally 2.1 firmware upgrade via KIES to Froyo 2.21 in March 2011. They have handed it back unfixed after a week. Cant find a problem like this on any forum/google. Can find one that is fixable with the resistor jig, but Samsung dealer says his jigs don't help:
1) Press power, on comes B&W Samsung GT I900 screen, then the mosaic graphic that resolves to the glowing big "S". Then it buzzes feebly. Eventually it goes black but keeps buzzing now and then. Power off works.
If you poke around trying to get it into 3 touch reset, the Menu and Back keys light up and stay lit.
2) 3 Touch reset will not work. Dunno if it ever did as never tried before.
3) Plug into USB charger, it charges fine and shows the charger icon.
4) Plug into KIES and after a lot of attempts, KIES identifies it + firmware and connects. I can see and save my contacts and it displays CONTACTS, INTERNAL SD and CALENDAR folders in KIES. No more
5) ODIN ( which I dunno how 2 use but have) sees the SGS's COM when I plug it to my comp.
6) The dealer claims to have tried to resart/reflash with Samsung jigs. He has handed it back with a "cant fix".
What the heck is going on here? Looks like I have lost a few hundred bucks and have to throw it away.
When did this start? Phone was working perfectly. Suddenly a solid red icon with large white star labelled "Web Page" appeared on home page but no such App was found in SETTINGS>ETC. In any case, "Web Page" just led me to a totally innocuous page I use all the time as a homepage on INTERNET app. A few starts and shutdowns after that ( the battery was getting low so swx'd on and off like 3 times over an hour), it just went into (1) above.
Phone is STOCK, no mods, no reflashes,no rooting etc
Thanks
Peter in Darkest Africa
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. Get your phone into download mode by pressing volume down+menu button+power button until you get the yellow screen showing the android working. then open odin 1.7 and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
flash Darky Rom 10.1 with JVO Modem . Best GPS i´ve ever had, and my GPS was really bad.
frostygenius said:
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. then open odin and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
Click to expand...
Click to collapse
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Ok, I dunno if this is gonna help but I had a very similar issue when I first got my phone, within a week of owning it.
Points 1-3, exactly what happened mine.
Points 4 & 5 I didn't try, (was fairly new to Android)
Left it in to my local Vodafone shop & within 5 days I had it back in perfect working order, the maintenance report stated faulty hardware, the display module had to be replaced. Maybe worth mentioning to the service guy?
R34L2Pac said:
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Click to expand...
Click to collapse
Thanks for the heads-up I forgot to mention those points. I've updated my original post.
Sent from my GT-I9000 using Tapatalk
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Yes you are correct, I can't get download mode. The phone has never been reflashed or messed with. It came with 2.1 and using KIES in March I reflashed to 2.2 and it worked perfectly for 10 weeks until it semi-bricked.
There is the Black Screen of eath...then there is the pulsasing S screen of limbo! That's what I have.
The only harwdare clue I have is the SGS blew the fuse in my car charger shortly before "expiring"...yet if connected to USB or other charger, it charges the battery and displays the logo.
peterg123 said:
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Click to expand...
Click to collapse
..But download mode doesn't display the S logo or even the first Galaxy S 1900 logo...it goes straight in.
Try looking up in the Development section - I'm sure there is a jig method in there and it might be worth trying yourself, you've not got mush to lose now.
If you can get into download mode eventually, search for and flash Ezbase, that will get you onto a rooted firmware and it works EVERY single time for me. Good luck.
@R34L2Pac
Hi, thanks. As posted, the stock UK model SGS 1900 with 2.1 Eclair worked perfect from Nov to March 2011, was firmware upodated by KIES in March 2011 to 2.2.1 Froyo and worked like a dream until it went "semi-bricked" with the "Logo of Limbo" screen ( the pulsating giant S) for no reason.
A week before this, I changed SIMs when I changed countries and for some reason lost all added apps. I had to re-install them and even then, sometimes twice as I got many "android process stopped" errors --- even on some of the Sansung installed ones like Layar. That is the only problem I ever had.
The phone has only had apps from Market and never been modded whatsoever. Many thanks
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
R34L2Pac said:
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
Click to expand...
Click to collapse
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Try en carefully learn hw to use odin coz I gt tha same exact model. I hav flashed mine many tyms en am on 2.3.4 XXJVP. if u do gt into download mode odin will sort u. Regards frm K.poly.
Sent from my GT-I9000 using XDA Premium App
peterg123 said:
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Click to expand...
Click to collapse
how long have you tried holding down the 'volume down+menu+power' keys? a simple quick press of the three buttons does not work. you have to keep holding them all down for a bit (sometimes upto to 15-20 seconds) for it to go into download mode.
Sorry for the fast answer but I'm at work atm... I think he needs to do the 3 combo button fix on his phone first. I know it's on the forum somewhere... Can anyone check it for him? I lost the 3 combo the first time I updated with Keys from 2.1 to 2.2 and I had to fix it using a program that I can't remember to go on download mode and apply that fix.
Then he can use Odin to flash a stock rom as he needs, plus having 3 combo fixed!
Good luck mate!
Sent from my GT-I9000 using XDA App
Possible fix for your problem
Hi peterg,
I was looking through the general forum and found this post, where user beamzuk1 describes method how he fixed his semibricked phone. Symptoms are the same (not booting, glowing soft-keys, vibrating, no recovery and no download mode). So he used 'adb reboot recovery', I would say that proper command is 'adb reboot download', but you can try both. Also go through guide HOWTO use ADB, which I posted here the link in earlier post.
Hope this will help.
PS: Try follow beamzuk1 step-by-step, because if you start phone earlier than you connect it to pc, adb might not recognize the phone. Also be sure that you have correctly installed drivers and android-sdk before you try this.
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
LiverpoolFCfan said:
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
Click to expand...
Click to collapse
+1
Also think that Samsung should repair it or replace it.
The fact your repair center has done nothing to fix your phone, in several occasions, now entitles you to brand new replacement or your money refunded in full, contract terminated and expenses paid for your losses incurred as a result of their negligence.
Why not hit them up for the SGS 2.
I had the same issue with my first Galaxy S...wifi stopped working at first, I turned it off then on again but nothing changed. So I rebooted to see if it would correct itself. Bootloops and no 3 button combo (download or recovery)
Sent it off to Samsung through the Carphone Warehouse in the UK. I'd contact a Samsung Service Centre directly if I were you.
Well i've had my i5700 for about two years and recently it's been acting rather strange, being extremely slow etc. But now it won't even boot up. I've been planning on upgrading anyway, i was just wondering if there's anything i could try to maybe save it? It's never been unlocked, still on 1.5 (thanks to complete lack of anything but Windows support by Samsung). Holding down volume down, call and call end just causes it to reboot before it reaches the end of the initial loading bar. I've tried most other combinations i could find, the only one that did anything other than a normal boot was call, ok and call end which put it in a 'self test' sort of thing, which wasn't much help.
Any ideas or should i just give up? Thanks
pm me about it so i can remember to help you tomorrow. i'll tell you how to upgrade to official 2.1. it's faster than 1.5. i can't help you now because i can't turn on my computer.
Sent from my Galaxy Spica using Tapatalk 2 Beta-6
You can get android 2.1 update with Kies I believe, but if your phone is rooted try to upgrade it with FROYO for SPICA (CyanogenMod-6.1.1-Spica-alpha8.3) which you can find it here:
http://forum.xda-developers.com/showthread.php?t=865342
It is not hard to do and I believe it works much better.
I can't use Kies if it won't boot up. And as far as i can see i can't root it without being unlocked and i can't unlock it without being rooted.
I hadn't upgraded it earlier because of the Kies driver requirement, which doesn't work on Linux. I do have access to a Windows laptop currently though...
I tried to use Kies from Download Mode, which i managed to get into a few days ago, but it doesn't do it now. Not sure if i'm doing the wrong combination or what.
If I remember correctly you don´t have to go in Download Mode when you use Kies. Just disable USB debugging. Do not enable it when you use Kies (turn it off). Then open Kies and let Kies search your phone. Then it will give you latest available version for Galaxy Spica i5700 which is android 2.1 and just let it update and reboot. I hope it will go well.
You mean disable USB debugging on the phone? Kind of hard to do when it won't boot up
I did get it to where Kies would recognize the phone, when it was stuck in a sort of loop after the boot animation. But it didn't give me the option to upgrade.
Ou yes, you mentioned the phone won´t boot up. In that case I really don´t know what to do. If I would be on your place and if I would want to keep that phone I would probably bring it to some service and explain the situation. They probably have some software to boot up the phone with I would think. If not, then I really don´t see any other option but to replace it with some other phone. That would be my choice, but of course it is up to you what do you want to do.
Okay, update: i have managed to get it into download mode. What now?
Okay, farukdgn helped me with this through PM. Seems to be sorted now. Should at least tide me through until my new phone arrives
I tried Odin myself but it seems most of the reason it didn't work for me was not being able to find the right files.
hey guys is will need some help with this device im not kind of a noobie on this kind of things bcs i been working with several phones, like the veteran xperia10, galaxy ace, motoroi2, etc etc. but never with a tablet
here is what it happens a friend ask me if i can upgrade his sgt-p1010 to a newer version, honeycomb or maybe ics, i´ve read a lot of posts regarding this on how to upgrade it trough odin everything was fine until the reboot of the device, bcs by my mistake i flash a rom of the 7.7" tab and this one is a 7" only now the tab is not turning on, odin is not recognizing it, either samsung kies or the pc. buttons are not responding it wont charge and cant enter to download mode.
I REALLY NEED HELP FROM U GUYS, HOPE U CAN HELP ME
ps. srry for my english :laugh:
This kind of thing can result in the inability to boot which can only be repaired by the use of specific hardware, i.e. this could be a "hard brick". Then again, maybe it can be restored to working order by flashing it again (a "soft brick"). So the very first thing you need to know is, can it get to download mode?
Turn it off, if it's switched on, and charge it for a couple of hours,say four hours. Use the original charger connected to mains. It doesn't matter if it shows anything, or nothing on the screen, let it charge. This is to make sure flashing it won't fail because it doesn't hold a charge.
Now connect it to the PC with the original USB cable. Then after making sure it's switched off, switch it on by pressing the On/Off button, while simultaneously the Volume UP switch. Press them both at the same time, and keep them pressed! If you're lucky you'll get the yellow graphic with the download text. A phone symbol, an !, and a PC symbol is fine too. Even if it doesn't show anything, you may be in download mode, so install the right drivers, and hopefully Odin or Heimdall will recognise is, and will allow you to flash the right ROM.
well i already let it charge for all night long and nothing happens after i perfomed the flashing the screen was totally in black but it doesnt shoes anything i mean the tab was turned on, then apparently batterie dies and after that is not charging. already tried with the heimdall thing but it says that device is not connected.
I think that this is going to be a HARD BRICK
so do u thhink there is another way to solve it?????
or it will be necessary the JTAG stuff???? bcs i dont want to try that it seems that is very difficult to me bcs i dont know nothing about hardware jejejeje
You have installed the Heimdall driver? It's called zadig.exe. Then you have to go to download mode and connect the Tab to the PC with the USB cable. Then Heimdall hopefully will detect the Tab.
If there's no way software will revive the Tab, it's hard bricked and will need hardware to get it working again. There's this guy mobiletechvideos.com who will repair any kind of brick. Basically he uses the JTAG on the board of the Tab and a special box to flash the right ROM to the Tab, even when it's dead. Some here have tried the service, and they say he's quite reliable. Another way is to modify your Tab with Adam Outler's Unbrickable Mod. It's brilliant, you can't soft brick your Tab after that, but it involves soldering very small components on the board of the Tab. The mobiletechvideos guy can do it for you I believe.
Well, I guess you just got a hardbrick .
The only way to fix this problem is go to SAMSUNG SERVICE CENTER.
Sent from my GT-P1000 using xda app-developers app
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Sisine said:
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Click to expand...
Click to collapse
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Vuk1152 said:
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Click to expand...
Click to collapse
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Sisine said:
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Click to expand...
Click to collapse
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Vuk1152 said:
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Click to expand...
Click to collapse
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Sisine said:
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Click to expand...
Click to collapse
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Vuk1152 said:
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Click to expand...
Click to collapse
I'll try that one, thank you.
Sisine said:
I'll try that one, thank you.
Click to expand...
Click to collapse
np
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
CurlyBlonde said:
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
Click to expand...
Click to collapse
sorry, i deleted my lenovo a1000 files to focus on other phones. from what i have heard that issue is common with that phone. i know someone who flashed the firmware on their a1000 and got stuck in the same issue as you. i tried to help them unbrick it but it seems to be impossible. i think you need to do a board replacement if you want to use that phone again. also, i dont think that the phone revisions are that important cause i managed to get lenovo a1000m firmware on my lenovo a1000.