Related
My Galaxy only enters in download mode, and when I try to flash a rom with odin, it stucks on factoryfs.img. Either rom with only 1 file or with 3 files and PIT file. It's able to flash kernel, but, when I try to flash a rom with CWM, an error occurs. I tryed to flash lpy, lc1, lc3 with odin and criskelo ics lpy and alba lpy
Hi, did you select the repartition box when using the pit file?
This happened because you didnt do the 4 wipes. You should flash a stock rom according to your actual base. I.e. if your actual kernel is lc1 then flash lc1.
Also, prior to this remove your battery for 5 minutes. Hope this helps. Please post your results.
Enviado desde mi Samsung Galaxy S2 ICS con AndyX ROM v9.0 usando Tapatalk 2
conanjf said:
My Galaxy only enters in download mode, and when I try to flash a rom with odin, it stucks on factoryfs.img. Either rom with only 1 file or with 3 files and PIT file. It's able to flash kernel, but, when I try to flash a rom with CWM, an error occurs. I tryed to flash lpy, lc1, lc3 with odin and criskelo ics lpy and alba lpy
Click to expand...
Click to collapse
What Rom were you on prior to attempting to flash with PC Odin?
Also, what did you do to cause the Note to be able to boot just into download mode?
Did you perform a wipe from any ICS leak or XXLPY prior to encountering this problem?
(read the sticky post at the top of this forum...)
I was using xxLPY official, but I didnt like it. And i dont remember what I did to brick the device haha... But I tried to flash with odin, all the ways possible, with pit file, only 1 file, 3 files, 3 files with pit. But what I really could flash, was the kernel only. And after flashing the kernel, i tried to flash with cwm, 2 differents roms
another person bricked their device while using Pc Odin. Non with Mobile Odin yet
I saw many posts from people who bricked the note, but now one could unbricked the phone =/
I bricked my note flashing a rom in recovery mode =/
try going back to stock gb..... check my sig...
antiguangenius said:
try going back to stock gb..... check my sig...
Click to expand...
Click to collapse
I tried to flash n differents stock gbs, no one successfully. I tried diferent ways to, 1 file or 3 files gb roms, with pit file or not, with repartition tick or dont...
But I think there is no way to fix that =/
conanjf said:
I tried to flash n differents stock gbs, no one successfully. I tried diferent ways to, 1 file or 3 files gb roms, with pit file or not, with repartition tick or dont...
But I think there is no way to fix that =/
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?p=23052721#post23052721
then flash gb again
I'll try now
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!
stuck =/
superbrick. Head to samsung service and tell them that your phone died when you tried to do factory reset.
Yes, another Superbrick....
Service centre is your only option now mate, sorry.
conanjf said:
I tried to flash n differents stock gbs, no one successfully. I tried diferent ways to, 1 file or 3 files gb roms, with pit file or not, with repartition tick or dont...
But I think there is no way to fix that =/
Click to expand...
Click to collapse
ok try this. if u flash all 3 or 1 files and it didnt work, flash the pit file. only the pit file. tick re partition, auto reboot and reset f.time.
after that, reboot the phone and reboot windows/mac. enter download mode, and flash the 3 or 1 file rom that u have. let me know if it work.
Just bricked mine from criskelo super stable build. flashed cm9 nightly rebooted and no power at all. usb dont see it either. So off to repair store. Dont do what I did
So no, do es anyone think that lpy is safe? Because i remember Many people saying that it was totally safe because it was oficial and not a leak
Really samsungs engineers must look ti what they are doing, it shouldnt be too difficult ti revert to gb eMMC driver
Sent from my GT-N7000 using xda premium
Ashren81 said:
ok try this. if u flash all 3 or 1 files and it didnt work, flash the pit file. only the pit file. tick re partition, auto reboot and reset f.time.
after that, reboot the phone and reboot windows/mac. enter download mode, and flash the 3 or 1 file rom that u have. let me know if it work.
Click to expand...
Click to collapse
I did, stuck again on factoryfs.img =/
My samsung Galaxy is totaly dead after I try to root the system.
Noy my phone is stay in Downloading mode, can't boot up, or recover mode.
I was using ATT OS and uppdrage to Android 4.3, after I upgrade, rood function is not working any more. Super user is ask my to manual root again.
my recover mode is still original can't back up or install any ROM.
can any one please help me provide how to flash my phone, may need some .md5 or .tar by using Odin3-v1.85 to reflash boot rocover mode that I can install other rom from web.
thank you , thank you please help.......................
Sam
sammaspda said:
My samsung Galaxy is totaly dead after I try to root the system.
Noy my phone is stay in Downloading mode, can't boot up, or recover mode.
I was using ATT OS and uppdrage to Android 4.3, after I upgrade, rood function is not working any more. Super user is ask my to manual root again.
my recover mode is still original can't back up or install any ROM.
can any one please help me provide how to flash my phone, may need some .md5 or .tar by using Odin3-v1.85 to reflash boot rocover mode that I can install other rom from web.
thank you , thank you please help.......................
Sam
Click to expand...
Click to collapse
What is your baseband?
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
[email protected] said:
What is your baseband?
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
thank you for help...
my is ATT I337 xxxxMF3, ..not sure, I try to root, after root ...is brick, please please help.
sammaspda said:
thank you for help...
my is ATT I337 xxxxMF3, ..not sure, I try to root, after root ...is brick, please please help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502003
Download the md5 tar file. And flash via odin
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=2502003
Download the md5 tar file. And flash via odin
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
thank you for your help.
Can you please let me know how should I choose this file? by using Odin3
which one I have to choose........Filedownload form "Bootloader" or "PDA"
thank you,
sammaspda said:
thank you for your help.
Can you please let me know how should I choose this file? by using Odin3
which one I have to choose........Filedownload form "Bootloader" or "PDA"
thank you,
Click to expand...
Click to collapse
I try all of them, now phone is asking me
Firmware upgrade encountered an issue. please selete recover mode in Kies & try again.
But I try to connect Kies to recover, but Kies can;t connected phone.....still need help.....
please please ...
thank you
sammaspda said:
I try all of them, now phone is asking me
Firmware upgrade encountered an issue. please selete recover mode in Kies & try again.
But I try to connect Kies to recover, but Kies can;t connected phone.....still need help.....
please please ...
thank you
Click to expand...
Click to collapse
Follow this guide by gtj0 http://forum.xda-developers.com/showthread.php?t=2526964
Or
There is a link to a guide to show you how to use this. You need to use Odin 3.07 or 3.09 http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Still failed.....screen always ask me use Kies to update firmware, but Kies still unable to undate............
still need more help.....
thank you
sammaspda said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> persdata.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Still failed.....screen always ask me use Kies to update firmware, but Kies still unable to undate............
still need more help.....
thank you
Click to expand...
Click to collapse
Go to best buy and have them reflash your firmware.
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
I went best buy this morning but they unable reflash my phone.
they ask call 1800 to get repair.......
If you were trying to upgrade to 4.3 and it failed, you might have to follow these directions: http://forum.xda-developers.com/showpost.php?p=48927617&postcount=3
sammaspda said:
I went best buy this morning but they unable reflash my phone.
they ask call 1800 to get repair.......
Click to expand...
Click to collapse
Your going to lose mf3. Follow that guide I posted earlier by gtj0 download the emergency files flash via Odin in PDA then adb sideload mf3-mj9 then mj9-mk2
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
---------- Post added at 06:49 PM ---------- Previous post was at 06:48 PM ----------
DeadlySin9 said:
If you were trying to upgrade to 4.3 and it failed, you might have to follow these directions: http://forum.xda-developers.com/showpost.php?p=48927617&postcount=3
Click to expand...
Click to collapse
I think he was trying to reflash the mf3 firmware
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
thank you for your help....I total give it up now....
I already try over weekend spend over 48HRs to working with phone.
always get problem, I have to send to JTAG not, thank you for your help.
How do you think JTAG repair service?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190990521197&ssPageName=ADME:X:RTQ:US:1123
thank you
Sam
sammaspda said:
thank you for your help....I total give it up now....
I already try over weekend spend over 48HRs to working with phone.
always get problem, I have to send to JTAG not, thank you for your help.
How do you think JTAG repair service?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190990521197&ssPageName=ADME:X:RTQ:US:1123
thank you
Sam
Click to expand...
Click to collapse
Don't give up so easy. ... If you tell us what kinda root method did u use it might help us to help you figure it out what is your firmware. ....MF3 use jortex method to root. ...(format your sd card to exfat and use terminal emulator)......If already on 4.3 MK2 u should use SAFEROOT METHOD from Verizon forum. .... follow my thread..... http://forum.xda-developers.com/showthread.php?t=2573080.... it will get u back on track. ...... If u are MF3 just use MF3.tar files from first post. ....If u think u are Mk2 using that one click tool..... (Most likely u are MK2 already. ... Since u said u upgraded to 4.3 and root doesn't work anymore).... Then u should go to post#3 follow the guide. .....u should be ok..... save that money.... If u need more help PM me......
Swyped_from_SS_MK2_Tapatalk
Jtag service man told me..."It looks like the bootloader is permanentaly locked with the rom you tried flashing"
do you know how to solve?
thank you
sammaspda said:
Jtag service man told me..."It looks like the bootloader is permanentaly locked with the rom you tried flashing"
do you know how to solve?
thank you
Click to expand...
Click to collapse
sammaspda said:
My samsung Galaxy is totaly dead after I try to root the system.
Noy my phone is stay in Downloading mode, can't boot up, or recover mode.
I was using ATT OS and uppdrage to Android 4.3, after I upgrade, rood function is not working any more. Super user is ask my to manual root again.
my recover mode is still original can't back up or install any ROM.
can any one please help me provide how to flash my phone, may need some .md5 or .tar by using Odin3-v1.85 to reflash boot rocover mode that I can install other rom from web.
thank you , thank you please help.......................
Sam
Click to expand...
Click to collapse
From my understanding that u are on MF3 and u updated to 4.3 MK2 firmware but your root isn't working (coz MK2 use different ROOT method....it called SAFEROOT) ....so i'm guessing u used terminal emulator ( same root method ) from MF3....or i dunno what u did manually (ADB shell maybe) ....u don't give enough information so other can help u......and then u hit bricked wall.......FOLLOW MY THREAD ON POST#3 MK2_UNBRICKED_METHOD from gtj0 guide that i edited .....make sure u download MF3>MK2update.zip from OP(Original Post) coz u gonna need it in the end .....download and extract all MF3-emergencypart 1 and 2 files......recovery-mj6.tar.md5....(or i337MK2stockrecovery.tar.md5...it also work with some user)....and follow the guide flashing via ODIN.....READ OP,post#2,post#3 make sure u understand everything before u damage more your expensive S4......need more help just PM me.....GOODLUCK.....U SHOULD BE OK....:good:....To show your appreciation in the future .......instead of typing thank you.....thank you....thank you......hit THANK button.....
Im having similar woes. I had problems installing a ROM, softbricked, tried restore to 4.2.2, wouldnt go, tried updating (stupidly) to 4.3 got obKNOXious (had no clue then about knox) tripped knox by trying to go back to 4.2.2 and got firmware update fail. Stuck with no recovery, nor any way of repairing. I tried many versions of ODIN, both kies emergency firmware update options, and heimdall. Heimdall seems promising as i have been able to flash a custom recovery with --no-reboot and reboot using pwr+home+vlup, and i get a warning about tripping knox but it boots into custom recovery. I am able to flash (CM11 for example) but it gives me kernel trips on knox and shuts down on boot. i saw your other thread about the mf3 and mk3 but im not sure if they would work for my variant. no matter what i try i cant get this paperweight to its former glory. local repair center said they wont do anything as knox warranty = tripped. no best buy samsung centers in my area. someone please help.
ted77usa said:
From my understanding that u are on MF3 and u updated to 4.3 MK2 firmware but your root isn't working (coz MK2 use different ROOT method....it called SAFEROOT) ....so i'm guessing u used terminal emulator ( same root method ) from MF3....or i dunno what u did manually (ADB shell maybe) ....u don't give enough information so other can help u......and then u hit bricked wall.......FOLLOW MY THREAD ON POST#3 MK2_UNBRICKED_METHOD from gtj0 guide that i edited .....make sure u download MF3>MK2update.zip from OP(Original Post) coz u gonna need it in the end .....download and extract all MF3-emergencypart 1 and 2 files......recovery-mj6.tar.md5....(or i337MK2stockrecovery.tar.md5...it also work with some user)....and follow the guide flashing via ODIN.....READ OP,post#2,post#3 make sure u understand everything before u damage more your expensive S4......need more help just PM me.....GOODLUCK.....U SHOULD BE OK....:good:....To show your appreciation in the future .......instead of typing thank you.....thank you....thank you......hit THANK button.....
Click to expand...
Click to collapse
sammaspda said:
Jtag service man told me..."It looks like the bootloader is permanentaly locked with the rom you tried flashing"
do you know how to solve?
thank you
Click to expand...
Click to collapse
OK im shocked but somehow i made this work. i used to kies to download firmware by using firmware upgrade and initialization under tools and grabbing the firmware from windows user/appdata/local/temp folder after kies finished downloading (as it starts decompressing)(faster than waiting to download from sammobile). i then pulled all files out of md5 using 7zip, and used heimdall to flash all files to their respective partitions/mountpoints. rebooted still no recovery nor boot. tried again and nothing. i then tried a custom recovery and it gave me seandroid enforcing RECOVERY and restart. so then i tried flashing custom recovery again using heimdall with --no-reboot switch and rebooted with volup+home+pwr and then i was able to enter custom recovery. so i wiped data and cache rebooted got nothing, no recovery no boot just dl mode. so i then reflashed stock rom through heimdall and rebooted, got stock recovery which would try to do something (progress bar appeared) and bootlooped. so i reflashed custom recovery again wiped cache and data and /data /media option (which took longer even though no extsdcard present, which puzzled me) and this time i tried to mount system in recovery and got an error. so i formated /system and it mounted fine. rebooted no boot no recovery. flashed custom recovery wiped /data /media, /cache, /dalvik, formated /sdcard, /system, /data, /cache, mounted /system and rebooted right into download mode and flashed stock image but this time with --no-reboot switch and once finished i manually rebooted into recovery. recovery did its thing and i finally i got a boot animation and glowing led, left it for 10 minutes and it was at samsung setup screen. unplugged my phone instantly died. no boot no recovery. repeated last step but once in samsung os i went to settings backup and reset menu and reset the phone from there. it went into recovery on its own, erased and rebooted and it seems to work fine now (fingers crossed, its only been ten minutes (relatively little compared to this 2 week ordeal.) Oddly enough kies downloaded a bell version although my phone is fido
Hey so one of my friends is having problems getting their S4 to boot. Currently she has K0T49H.L720VPUFNAE on her S4. She has no custom recovery, but did have the phone rooted. Now the device can't boot. It gets past the Samsung Galaxy S4 screen and then goes black, the blue notification light pulses, and the phone makes a beep (almost like the initial boot sound) and then just hangs there. I've tried to odin back to stock, but I receive "failed! (Auth) almost immediately after starting.
On the Samsung Galaxy S4 screen both "Kernel is not seandroid enforcing" & "Warranty bit: kernel" are displayed in the top corner.
I can boot into stock recovery & download mode.
Any help would be appreciated!
It sounds like you are trying to Odin an older version on there than NAE. You cant downgrade, only can flash the NAE tar or the newer NG2.
Download it here, and try flashing it instead. After you flash, if it still wont boot, boot into recovery mode and do a factory reset.
random45 said:
It sounds like you are trying to Odin an older version on there than NAE. You cant downgrade, only can flash the NAE tar or the newer NG2.
Download it here, and try flashing it instead. After you flash, if it still wont boot, boot into recovery mode and do a factory reset.
Click to expand...
Click to collapse
I am trying to flash NAE tar and have tried the NG2. Both result in the errors mentioned above.
I also have gone into stock recovery and performed a factory reset.
Joey43 said:
I am trying to flash NAE tar and have tried the NG2. Both result in the errors mentioned above.
I also have gone into stock recovery and performed a factory reset.
Click to expand...
Click to collapse
can you post the log from odin? Also what version of odin are you using? have you tried flashing Phil's Recovery and maybe just installing a ROM?
random45 said:
can you post the log from odin? Also what version of odin are you using? have you tried flashing Phil's Recovery and maybe just installing a ROM?
Click to expand...
Click to collapse
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
There's the log. I can't install a custom recovery either. It acts like it is installing correctly, but when it reboots it is still stock recovery.
Joey43 said:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
There's the log. I can't install a custom recovery either. It acts like it is installing correctly, but when it reboots it is still stock recovery.
Click to expand...
Click to collapse
what version of odin are you using?
random45 said:
what version of odin are you using?
Click to expand...
Click to collapse
Oh, sorry. I've tried both 3.07 & 3.09
Joey43 said:
Oh, sorry. I've tried both 3.07 & 3.09
Click to expand...
Click to collapse
Okay, its really strange honestly. I spent sometime looking online for possible solutions, and the only thing I can come up with is:
1. make sure you are using the usb cable that came with the phone, and that it is undamaged
2. if its a desktop, make sure the usb cable is connected on the back. if you have usb 3.0 ports try it on there
3. some people say odin and kies dont get along. I do not share this experience, but who knows, doesnt hurt to try uninstalling kies, and install phone drivers
How did this happen by the way?
random45 said:
Okay, its really strange honestly. I spent sometime looking online for possible solutions, and the only thing I can come up with is:
1. make sure you are using the usb cable that came with the phone, and that it is undamaged
2. if its a desktop, make sure the usb cable is connected on the back. if you have usb 3.0 ports try it on there
3. some people say odin and kies dont get along. I do not share this experience, but who knows, doesnt hurt to try uninstalling kies, and install phone drivers
How did this happen by the way?
Click to expand...
Click to collapse
I'm using my S3 cable since her OEM one is broken. I tried around 4 different cables since I had the same thought. I never had kies installed and I did install the drivers.
I have really awful internet stability and speed (like 100kbs) so I'm hoping that the download is just corrupted and I'm just trying to re-download it.
I honestly don't know, she gave it to her brother to look at first, whom I suspect made the issue worse. I'm usually pretty good at fixing these things and I thought that it was an easy fix since it could reach download mode. I really appreciate all the help still.
have you tried flashing a pit file?
here is a 16 GB Sprint L720 NAE pit file you can try. do that with caution, and as a last resort.
Joey43 said:
I'm using my S3 cable since her OEM one is broken. I tried around 4 different cables since I had the same thought. I never had kies installed and I did install the drivers.
I have really awful internet stability and speed (like 100kbs) so I'm hoping that the download is just corrupted and I'm just trying to re-download it.
I honestly don't know, she gave it to her brother to look at first, whom I suspect made the issue worse. I'm usually pretty good at fixing these things and I thought that it was an easy fix since it could reach download mode. I really appreciate all the help still.
Click to expand...
Click to collapse
random45 said:
have you tried flashing a pit file?
here is a 16 GB Sprint L720 NAE pit file you can try. do that with caution, and as a last resort.
Click to expand...
Click to collapse
I tried that and received a "secure check fail: PIT" error. Phone performs the same as before.
i think the phone's busted....maybe try sending it to that one place that can jtag phones?
I think this is the site, but dont hold me to it.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s4-jtag-brick-repair/
random45 said:
i think the phone's busted....maybe try sending it to that one place that can jtag phones?
I think this is the site, but dont hold me to it.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s4-jtag-brick-repair/
Click to expand...
Click to collapse
I got philz custom recovery finally, and was able to flash NG2 pre-rooted, but the baseband version is old and wifi/data isn't working. I'm trying to flash the NG2 Modem.tar under the phone tab in odin, but i receive fail auth still and secure check fail: apnhlos.
I'm currently pursuing .tar to flashable .zip python converters, because it seems I cannot flash anything but one specific version of philz recovery in odin, but can flash anything through custom recovery.
Joey43 said:
I got philz custom recovery finally, and was able to flash NG2 pre-rooted, but the baseband version is old and wifi/data isn't working. I'm trying to flash the NG2 Modem.tar under the phone tab in odin, but i receive fail auth still and secure check fail: apnhlos.
I'm currently pursuing .tar to flashable .zip python converters, because it seems I cannot flash anything but one specific version of philz recovery in odin, but can flash anything through custom recovery.
Click to expand...
Click to collapse
Okay, so your making some progress.
random45 said:
Okay, so your making some progress.
Click to expand...
Click to collapse
where can i get that philz recovery im goin thru the same thang
I don't have this phone anymore. Good luck.
Sent from my SM-N910P using Tapatalk
To be honest TWRP is your better option for recovery on the S4 (I was a staunch supporter of Philz on my S3) one thing you need to make sure when you flash TWRP it to uncheck the auto reboot option. When flash completes, unplug and pull battery and then boot directly into recovery, then it sticks. You may be having WiFi/data issues because of your baseband/ROM combo. Have you tried flashing the latest stock?
Need Help Device stuck After flash?
I have the sprint sph l720t model. I finally acquired root access. I tried to flash Cyogenmod. When I did, it finished and rebooted and a after reboot it says cyogen mod in a circle that just keeps on spinning. I tried to get back to my blue team win screen into recovery but no luck. I got the phone to go into download mode once. I do have backups on my SD card with all the files can I flash a backup? What can I do?? The recovery says in red kernel is not se enforcing then under that in yellow set warranty bit: kernel? Can I use odin to do something in download mode to get my device back up?? I did refash my MD.5 file again from chainfire no luck! Help? Thanks
mattzeller said:
To be honest TWRP is your better option for recovery on the S4 (I was a staunch supporter of Philz on my S3) one thing you need to make sure when you flash TWRP it to uncheck the auto reboot option. When flash completes, unplug and pull battery and then boot directly into recovery, then it sticks. You may be having WiFi/data issues because of your baseband/ROM combo. Have you tried flashing the latest stock?
Click to expand...
Click to collapse
Yes I am now running Lollipop 5.0.1. I also did finally get TWRP installed. Everything is back to normaral. I re-installed the firmware from sam mobile. I then ofcoarse, went and flashed cf-autoroot with Odin. I pulled the batterry this time and booted up into recovery. Somehow everything is working and I do have recovery somewhere in my device. I want to try another Rom but Honestly TWRP makes me nervous evertime I open the app! What should I try next. Its just like factory rom with root but not really root. Its weird. At suggestios would be cool.. Thanks
EngineManShawn said:
Yes I am now running Lollipop 5.0.1. I also did finally get TWRP installed. Everything is back to normaral. I re-installed the firmware from sam mobile. I then ofcoarse, went and flashed cf-autoroot with Odin. I pulled the batterry this time and booted up into recovery. Somehow everything is working and I do have recovery somewhere in my device. I want to try another Rom but Honestly TWRP makes me nervous evertime I open the app! What should I try next. Its just like factory rom with root but not really root. Its weird. At suggestios would be cool.. Thanks
Click to expand...
Click to collapse
You have a lot of options now that you are presumably on the latest baseband. Just download the ROM you want, copy it to your external SD card and flash in TWRP.
If you like TouchWiz I suggest Wicked X:
http://forum.xda-developers.com/showthread.php?t=3115583
It's a fairly modified TW ROM, with quite a few mods that you can apply as you see fit. The developer is fantastic, quick to support and address issues. Every time he changes devices, I change to that device, he's that good. I've been stalking him since his time developing for the S2.
If TW isn't your thing, I suggest BlissPop:
http://forum.xda-developers.com/showthread.php?p=62018060
When I'm not running Wicked X I'm running BlissPop. The only caveat is I have not been able to get data to work properly on the latest builds, but the experimental build from 9/28 that I run is flawless. If you can't find it on their page, let me know I have it up on Mega.
Neither one is better than the other, it just a matter of preference. They both have great battery life, especially when paired with Greenify.
Ive created this thread specifically for. The australian . Singapore. India and LATAM users
DISCLAIMER
anything you do or use from this thread, you are doing so at your own risk, and full responsibilty is on you, i nor any developer or moderator will accept any liability or responsibility to your device or computer
Click to expand...
Click to collapse
Before you start create a back up
download and install flashfire
And back up all your partitions
(only back up data if needed)
then copy the backups folder to your hdd/cloud
All thanks goes to @Chainfire do that here
DRIVERS
Firstly download and install the latest samsung mobile drivers
SAMSUNG MOBILE DRIVERS
FIRMWARE
secondly download the latest version of your firmware i recommend G925IDVU1AOD1
FIRMWARES
AIO TOOL
for root, recovery, back up, restore and much more
UNIFIED TOOLKIT
all thanks goes to @mskip
ROOT
to root, Flash as pda in odin. Making sure your phones in download mode and usb debugging has been enabled in developer options. And your computer has the latest drivers installed
If you havent taken the ota
flash the sm-g925t tar file
If you have taken the ota
flash the sm-g925f tar file
if either of these fail, or stick at boot, try this sm-g920i file
All thanks goes to @Chainfire for his continued legendary work
STOCK RECOVERY
Stock recovery
(baseband-g925idvu1aoc5 / build number lrx22g.g925idvu1aoc4)
which i converted to .tar for flashing in odin
STOCK KERNEL
stock kernel
(baseband-g925idvu1aoc5 / build number lrx22g.g925idvu1aoc4)
which i converted to .tar for flashing in odin
CUSTOM RECOVERY
if you would like twrp for your device
you will need to flash G925IDVU1AOD1 or above firmware and then zeroltetmo version of twrp 2.8.6.0
CUSTOM KERNEL
if you want to flash custom kernels
you will need to flash G925IDVU1AOD1 firmware and then your chosen kernel
KERNEL SOURCE CODE
SM-G925I_LATIN_LL_Opensource.zip is now available
SM-G925I_SEA_LL_Opensource.zip is now available
SM-G925I_SWA_LL_Opensource.zip is now available
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=sm-g925
CUSTOM ROMS
YOU CAN FLASH ALMOST ANY S6 ROM OR S6 EDGE ROM
As long as
A, your running G925IDVU1AOD1 (or above) firmware , and
B, straight after, you flash any sm-g925i kernel
Troubleshooting
DEEP SLEEP
To regain deep sleep after rooting, please flash stock recovery in the op
SOFT BRICK
to fix soft brick, boot loop, or stuck at splash screen simply flash firware in odin and re root, no data will be lost
Have you tried it yet? I have an Australian SM-G925I bought outright from Harvey Norman. Haven't found a way to root it yet.
I flashed the g925t on my g925i and it went smoothly and I'm now rooted. The downside is that I'm now with "KNOX WARRANTY VOID: 1" haha but who cares
kR105! said:
I flashed the g925t on my g925i and it went smoothly and I'm now rooted. The downside is that I'm now with "KNOX WARRANTY VOID: 1" haha but who cares
Click to expand...
Click to collapse
What 925i do you have ? What country etc?
pcxnet said:
What 925i do you have ? What country etc?
Click to expand...
Click to collapse
32GB Galaxy S6 Edge Black/Blueish. I'm from Chile and the operator is Entel.
Thanks I might wait for a couple more confirmations then give it a go lol
I have the Australian version. I'm just waiting on the drivers to install and then il give it a whirl
I can confirm the root works for australian sm-g925i device . Uaing the sm-g925t .tar file
gav83collins said:
I can confirm the root works for australian sm-g925i device . Uaing the sm-g925t .tar file
Click to expand...
Click to collapse
Im getting below. Debugging is on, unknown resources are on. Drivers are installed.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Confirmed, g950t file succesfully rooted my G925i phone
rjwdon said:
Confirmed, g950t file succesfully rooted my G925i phone
Click to expand...
Click to collapse
Doesn't work it fails for me.
According to this video G925t S6 Edge download is corrupt and they had to use G920t S6 to root.
https://www.youtube.com/watch?t=348&v=En2UpJjle6E
SkilletDesire said:
Doesn't work it fails for me.
According to this video G925t S6 Edge download is corrupt and they had to use G920t S6 to root.
https://www.youtube.com/watch?t=348&v=En2UpJjle6E
Click to expand...
Click to collapse
Did you download and install the latest s6 edge drivers ? Guessing so because odin detected it
Was your s6 edge in download mode
gav83collins said:
Did you download and install the latest s6 edge drivers ? Guessing so because odin detected it
Was your s6 edge in download mode
Click to expand...
Click to collapse
I got the drivers from here http://developer.samsung.com/technical-doc/view.do?v=T000000117
Yes was in download mode. Are these drivers old?
Did you accept any ota beforw tryong root. Not that im sure that matters. Take a screenshot if your "about phone" lets see of ours match. Il do the same
Hi there
I am in Saudi Arabia , I pre-ordered the device and I get that version SM-G925i.
Since that time I was upset because I was waiting for the international one , you know most developments are going to the international one.
My question is , are we going to get support and development for ours ( ROMS,MODS..etc.) ?
thanks in advance.
I was thinking about developing my own rom. I was gonna wait though. Im a bit of a perfectionist and i dont really have the time to dedicate what would be needed to fulfil the project
SkilletDesire said:
I got the drivers from here http://developer.samsung.com/technical-doc/view.do?v=T000000117
Yes was in download mode. Are these drivers old?
Click to expand...
Click to collapse
Im not sure. I juat downloaded the latest samsung drivers. And checked to makes sure they all installed. With the phone on. The phone off. And also in download mode.
This is my build number in this snapshot
gav83collins said:
Did you accept any ota beforw tryong root. Not that im sure that matters. Take a screenshot if your "about phone" lets see of ours match. Il do the same
Click to expand...
Click to collapse
Phone said it was up to date when I first set it up. Here is the screen shot.
Yeah its the same as mine. What machine did you use. I used a friend's windows vista machine i was cleaning.
Hi all,
Im new to this forum and i really dont know if i can post a topic here, sorry if it is the wrong section.
Ow yeah, im dutch so if i use wrong words ore something my apollogizes to
Well the problem is that i have a Samsung galaxy S5 (SM900F - KLTE) i suppose, and i would to flash CM13.
Well now you guys think thats not really a problem.. wel it is really.
First i tried to root the device, well that wouldnt work because odin keeps saying the same stupid problem..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then i've searched and searched and found this video on youtube with some guy who calls himself the android docter and he said flash your S5 to an earlier firmware, and then you should able to root the device.
Well thats what i did, flashed the device from android 5.0 to 4.4.2..
And guess what still cant root it.
The root i tried was CF-auto-root-klte-kltexx-smg900f.zip and CF-auto-root-klte-kltexx-smg900f.zip
Both the same failure/error. i even tried to flash TWRP but i think i should root the device first.
I got the proper samsung drivers and i tried even some other odin versions.
Can someone help me plz, i would be so thankfull.
I'm Dutch to. First question i have is, are you using original data kabel?
cooperke said:
I'm Dutch to. First question i have is, are you using original data kabel?
Click to expand...
Click to collapse
Yes i do, i got 2 cables here both original and they both dont work.
Okee. Have you flashed stock rom? On what rom are you?
cooperke said:
Okee. Have you flashed stock rom? On what rom are you?
Click to expand...
Click to collapse
I did flashed from 5.0 to 4.4.2.
So currently im running a stock version of 4.4.2 kitkat
Ik heb mijn de laatste keer, gisteren nog, geroot op 5.0 rom van luxemburg BOJ1. taal kan je instellen op Nederlands. Heb je ook usb-foutopsporing aangevinkt in ontwikkelaarsopties?
---------- Post added at 04:20 PM ---------- Previous post was at 04:19 PM ----------
Send me private message than we can speak dutch
I had the same problem... But i don't know how I came out... I've tried lots of time changing the USB port and the USB jack. Instead of using cf auto root try to root supersu from a custom recovery. So try to flash a custom recovery and see if it works.
Sent from my SM-G900F using Tapatalk
Eazbir01 said:
Instead of using cf auto root try to root supersu from a custom recovery. So try to flash a custom recovery and see if it works.
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Well i downloaded Cyanogen Recovery but thats an .img file, and i cant flash .img files.
DunnoNL said:
Well i downloaded Cyanogen Recovery but thats an .img file, and i cant flash .img files.
Click to expand...
Click to collapse
U can covert the .img file to md5
https://mega.nz/#!5BVwVSbK!OaAa2vC5J3J9TJ1leCMlT4NmFCDSH36aveblLIHKumk
https://mega.nz/#!JQkERaZR!UYk3o8bzhbr2Ua_yYMZBoCX9k38fMI1SWkNXhJ2X4jo
https://mega.nz/#!5IEUlCII!rzaphpXJwChTUcwSWfZIi3r1xBg1y07Zijj2g1MhyeQ
I suggest u to use twrp or philz touch recovery.
Sent from my SM-G900F using Tapatalk
Ok....There seems to be a lot of conflicting, confusing information on this thread......
To clear things up a bit.....
It has been mentioned that rolling back to 4.4.2 is necessary in order to gain root....
While it is possible to do this, it certainly isn't *necessary*.
It has also been stated that the rollback and root didn't work.....
I'm guessing here (because the entire method wasn't mentioned) that it was suggested to rollback and use Towelroot to root the device. It is possible to do this, but only under certain circumstances.....
Go to 'about device' and check the build date.....
If the build was compiled AFTER the end of June 2014, towelroot WILL NOT WORK.
In this case, it is necessary to....
1) install (but do not run) the towelroot app.
2) Use Odin to flash a pre June 2014 kernel.
3) run towelroot.
4) re flash your original kernel.
5) enjoy your rooted device.
See this thread for full instructions....
Rooting knox 0x0 by wajiman
http://forum.xda-developers.com/showthread.php?t=2843044
If the user is running Lollipop, rooting can be achieved by odin flashing TWRP 2.8.7.0, then booting into TWRP to flash SuperSU 2.46 zip.......
This exact method.....
1) deactivate 'Reactivation Lock'.
2) copy SuperSU zip to your device.
3) boot into download mode.
4) Odin flash TWRP 2.8.7.0 (specifically this version).
5) DO NOT allow phone to boot, (remove the battery as soon as the TWRP flash has completed if necessary) then.....
6) boot directly into recovery. (Vol +, Power & Home button combination)
7) flash SuperSU zip.
8) boot device as normal.
TWRP 2.8.7.0 by Dees_Troy
http://forum.xda-developers.com/showthread.php?t=2727406
superSU zip v2.46 by Chainfire
http://forum.xda-developers.com/showthread.php?t=1538053
http://i.imgur.com/rVnFwJM.jpg