Related
Hi guys, I will try and explain this as simple as possible.
I as trying to install cyanogenmod 11 on my phone, and everything seemed to go alright until I made a mistake. I used TWRP to first backup my stock rom on the phone, and then when I was supposed to reboot into the app, I accidently rebooted the phone.
Now the problem is that the phone does not have any OS installed, so what is happening is that it's trying to boot into an OS that's not there, and instead ends up being stuck on the Samsung logo. I can enter Odin mode just fine, but for the love of god I cannot seem to figure how to get back into the TWRP application, or if it is even possible.
I do have the backup of the ROM stored on my SD card, and I've now moved it over to my PC, but it still does not seem to help me in any way. I've trid to launch the Odin3 program on my pc, in an attempt to to try and launch in TWRP through that, but it has all been without any success, so now I come to this board of guinesses, asking for help!
As an added bit of information, this was my first time trying to install a custom rom, so yeah.. Puff..
- The lost Dane.
- Edit -
I tried to "flash" by doing what this link said, in the hopes that my phone would boot into the program, but alas, it only booted back to the logan saying "samsung Galaxy Note 3 SM-N9005" :/
http://forum.xda-developers.com/showthread.php?p=30694404
-- Edit Edit --
To make it super clear ... If I could get back into TWRP, I would be able to run my backup. I know how that app works, I just simply cannot get back into, and I do not know if it is even possible. I've searched and tried various guides to "flash TWRP through Odin" but it has all been without any success... :/
Thaelern said:
Hi guys, I will try and explain this as simple as possible.
I as trying to install cyanogenmod 11 on my phone, and everything seemed to go alright until I made a mistake. I used TWRP to first backup my stock rom on the phone, and then when I was supposed to reboot into the app, I accidently rebooted the phone.
Now the problem is that the phone does not have any OS installed, so what is happening is that it's trying to boot into an OS that's not there, and instead ends up being stuck on the Samsung logo. I can enter Odin mode just fine, but for the love of god I cannot seem to figure how to get back into the TWRP application, or if it is even possible.
I do have the backup of the ROM stored on my SD card, and I've now moved it over to my PC, but it still does not seem to help me in any way. I've trid to launch the Odin3 program on my pc, in an attempt to to try and launch in TWRP through that, but it has all been without any success, so now I come to this board of guinesses, asking for help!
As an added bit of information, this was my first time trying to install a custom rom, so yeah.. Puff..
- The lost Dane.
- Edit -
I tried to "flash" by doing what this link said, in the hopes that my phone would boot into the program, but alas, it only booted back to the logan saying "samsung Galaxy Note 3 SM-N9005" :/
http://forum.xda-developers.com/showthread.php?p=30694404
-- Edit Edit --
To make it super clear ... If I could get back into TWRP, I would be able to run my backup. I know how that app works, I just simply cannot get back into, and I do not know if it is even possible. I've searched and tried various guides to "flash TWRP through Odin" but it has all been without any success... :/
Click to expand...
Click to collapse
Did you hold volume up+home+power button to get into recovery mode?
In case your twrp get corrupted due to flashing failure previously
1. Download twrp from the following. 2.6.3.7 if you were running 4.3 or 2.6.3.8 if you were running 4.4.2(not sure if 2
6.3.8 is 4.3 compatible). For odin flashable use the one with .tar
http://www.techerrata.com/browse/twrp2/hlte
2. Get into download mode(vol down+home+power)
3. Link the downloaded .tar to pda in odin. Odin log should show 'added' once you connect phone to pc
4. Start the process. Once finish phone should boot into recovery automatically but it'll try to boot back into OS. Just hold vol up+home+power button to get back into recovery
Rosli59564 said:
Did you hold volume up+home+power button to get into recovery mode?
Click to expand...
Click to collapse
When I do that, I get an ultra short blue text appearing on the screen, before it goes into downloading mode, with a red text saying "Could not do normal boot." So it basically goes right into odin mode.
Thaelern said:
When I do that, I get an ultra short blue text appearing on the screen, before it goes into downloading mode, with a red text saying "Could not do normal boot." So it basically goes right into odin mode.
Click to expand...
Click to collapse
I edited my post. You need to reflash twrp
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Thaelern said:
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Click to expand...
Click to collapse
Yes if you know your previous twrp version than you can restore your old rom backup
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
Thaelern said:
You are an absolute god. I wish I could show my appreciation, but I fear words isn't even enough to even begin.. I managed to get into TWRP now, though my backup rom doesn't show up anymore, but I suppose that's because I run a different version of TWRP than I did first? Idk, but really appreciate that you were able to get me back into TWRP.
Click to expand...
Click to collapse
Right you need your previous twrp version to use the backup
Hehe you can actually press the thanks button
Rosli59564 said:
Yes if you know your previous twrp version than you can restore your old rom backup
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
Right you need your previous twrp version to use the backup
Hehe you can actually press the thanks button
Click to expand...
Click to collapse
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Thaelern said:
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Click to expand...
Click to collapse
Yes you can flash any cm based rom.
You can also flash any stock rom such as SweetRom/X-Note/BobCat as most developers still keeping 4.3 rom in their thread.
Thaelern said:
I really do appreciate the help you've given, but I have one final request, and I really do hope it isn't too much to ask. Say I am unable to find the same version of TWRP, I will have to actually flash cyanogenmod onto my device. I don't think it should be too tough now that I've managed to launch into TWRP, because now I should be able to just put the rom on my SD card, and then install the files, no?
if it helps you, my device is SM-N9005, and I had 4.3 when I started this whole thing. Cheers!
- Edit.
I tried to download the Nighty build from CyanogenMod's own homepage, but when I try and install it, it says failed, giving me an erro that says "This package is for "hlexx" devices: This is a." That's all it says ... Hmfh. Sooooooooo... Yes! I'm in recovery mode now, but without any rom. :/
Click to expand...
Click to collapse
Try this link: http://download.cyanogenmod.org/?device=hlte
Sent from my toaster
blackknightavalon said:
Try this link: [
Sent from my toaster
Click to expand...
Click to collapse
Will that work on the international version of the Note 3 ? I'm starting to believe that's the whole culprint of why I can't get it to work. :/
Thaelern said:
Will that work on the international version of the Note 3 ? I'm starting to believe that's the whole culprint of why I can't get it to work. :/
Click to expand...
Click to collapse
Believe so. It's because of updater script i guess as described in the link
http://forum.xda-developers.com/showthread.php?t=2600648&page=2
Try flashing chenglu's 6.0.4.5 recovery.
http://forum.xda-developers.com/showthread.php?t=2454079
Just the same as you did for twrp. I think i read somewhere that changing recovery helped some people.
The worst just download sweetrom/x-note/bobcatrom or any stock 4.3 based rom if you deperately need the phone to boot up
Rosli59564 said:
Believe so. It's because of updater script i guess as described in the link
Try flashing chenglu's 6.0.4.5 recovery.
Just the same as you did for twrp. I think i read somewhere that changing recovery helped some people.
The worst just download sweetrom/x-note/bobcatrom or any stock 4.3 based rom if you deperately need the phone to boot up
Click to expand...
Click to collapse
So after having spent the better half of the night, I actually managed to get my phone to boot into cyanogenmod 11 ! But that joy was shortlived when I came to realize that wi-fi wasn't working, and I couldn't get it to work. I tried to factory reset as I had read would help, but alas it did no good. I figured I should try and run back a stock 4.4.2 rom and just be done with it, but that was when I realized I had lost my root (?!) so that wasn't really a possibility either, next I set out to try and find a way to root my phone now running cyanogenmod 11. I found a file here on XDA called "CF-Auto-Root-hlte-hltexx-smn9005.tar" but whenever I try and flash that onto my phone, my phone just stays stuck saying "trying to enter into recovery mode" and does not really go anywhere from there. I can get back into recovery mode if I flash "n9005-cwm-recovery-6.0.4.5(1116)" onto the phone, like you said, but that still leaves me without root access, which I need to throw a rom onto my device?! Arrrgh, this is getting silly, I just wish I could go back to my backup/ default rom on the device, but I can't.
Thaelern said:
So after having spent the better half of the night, I actually managed to get my phone to boot into cyanogenmod 11 ! But that joy was shortlived when I came to realize that wi-fi wasn't working, and I couldn't get it to work. I tried to factory reset as I had read would help, but alas it did no good. I figured I should try and run back a stock 4.4.2 rom and just be done with it, but that was when I realized I had lost my root (?!) so that wasn't really a possibility either, next I set out to try and find a way to root my phone now running cyanogenmod 11. I found a file here on XDA called "CF-Auto-Root-hlte-hltexx-smn9005.tar" but whenever I try and flash that onto my phone, my phone just stays stuck saying "trying to enter into recovery mode" and does not really go anywhere from there. I can get back into recovery mode if I flash "n9005-cwm-recovery-6.0.4.5(1116)" onto the phone, like you said, but that still leaves me without root access, which I need to throw a rom onto my device?! Arrrgh, this is getting silly, I just wish I could go back to my backup/ default rom on the device, but I can't.
Click to expand...
Click to collapse
About the cf auto root make sure you flash the one for 4.3. I believe you flashed the one for 4.4.2.
Doesn't really matter whether you have root access or not as long as you can boot into custom recovery. Just flash any custom rom. It'll give you root anyway.
Still if you need root just make sure you flash cf auto root then flash twrp or chenglu recovery. Flash the one for 4.3 that's the most important
Rosli59564 said:
About the cf auto root make sure you flash the one for 4.3. I believe you flashed the one for 4.4.2.
Doesn't really matter whether you have root access or not as long as you can boot into custom recovery. Just flash any custom rom. It'll give you root anyway.
Still if you need root just make sure you flash cf auto root then flash twrp or chenglu recovery. Flash the one for 4.3 that's the most important
Click to expand...
Click to collapse
But when I have cyanogenmod 11 installed, is that then not 4.4.2 ? I suppose that's what's giving me trouble... I'll try and see if I can find the cf auto root for 4.3 and return back if I was successful or not. Again, thank you for being so patient..
-Edit
This seems to be the only one I can find; http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And I've already tried that one 3 times, but every time I flash it, the phone reboots and keeps trying to enter into recovery mode, and is unable to do so before I've flashed n9005-cwm-recovery-6.0.4.5(1116) again
this is what it says;
"recovery booting...
Recovery is not seandroid enforcing
Set warranty bit : Recovery "
Thaelern said:
But when I have cyanogenmod 11 installed, is that then not 4.4.2 ? I suppose that's what's giving me trouble... I'll try and see if I can find the cf auto root for 4.3 and return back if I was successful or not. Again, thank you for being so patient..
-Edit
This seems to be the only one I can find; http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And I've already tried that one 3 times, but every time I flash it, the phone reboots and keeps trying to enter into recovery mode, and is unable to do so before I've flashed n9005-cwm-recovery-6.0.4.5(1116) again
this is what it says;
"recovery booting...
Recovery is not seandroid enforcing
Set warranty bit : Recovery "
Click to expand...
Click to collapse
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
Rosli59564 said:
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
Click to expand...
Click to collapse
Just enter download mode and reflash twtp. I saw there are 4 different versions for 4.3(2.6.3.0/2 6.3.5/2.6.3.6/2.3.6.7). Flash 1 by 1 and see if it can restore your backup
Rosli59564 said:
You flashed 4.4.2 cm rom but you're on 4.3 booloader. So you need to use cf auto root for 4.3 which is available here
http://forum.xda-developers.com/showthread.php?t=2466423
read third post(download section)
---------- Post added at 09:41 PM ---------- Previous post was at 09:34 PM ----------
Just enter download mode and reflash twtp. I saw there are 4 different versions for 4.3(2.6.3.0/2 6.3.5/2.6.3.6/2.3.6.7). Flash 1 by 1 and see if it can restore your backup
Click to expand...
Click to collapse
You really are a boss with a heart of gold! I used the file you linked me, ran it, and sure enough it installed and gave me root access. Believe it or not, but I am learning from this! The whole thing about bootloader being different from the rom version was new to me. But I am up and running with root access now, so now I hope it shouldn't be too hard to get a stock rom thrown in. I've kinda given up on my backup. I no longer care for the files I had before, now I just want the phone up and running with wifi.. X_ X
- Edit
Or do you have any clue as to what is causing wifi to not work? I really don't mind the rom at all, I quite like it, but where I live wifi is mandatory as it's a lowered area with mountains around me, meaning LTE really isn't viable while at home.
Thaelern said:
You really are a boss with a heart of gold! I used the file you linked me, ran it, and sure enough it installed and gave me root access. Believe it or not, but I am learning from this! The whole thing about bootloader being different from the rom version was new to me. But I am up and running with root access now, so now I hope it shouldn't be too hard to get a stock rom thrown in. I've kinda given up on my backup. I no longer care for the files I had before, now I just want the phone up and running with wifi.. X_ X
- Edit
Or do you have any clue as to what is causing wifi to not work? I really don't mind the rom at all, I quite like it, but where I live wifi is mandatory as it's a lowered area with mountains around me, meaning LTE really isn't viable while at home.
Click to expand...
Click to collapse
Not sure about the wifi problem but yes you're good to go with a new rom. Make sure to choose only for 4.3 bootloader else you will run into problem later
Rosli59564 said:
Not sure about the wifi problem but yes you're good to go with a new rom. Make sure to choose only for 4.3 bootloader else you will run into problem later
Click to expand...
Click to collapse
Could you be so kind and to link me to a rom that works for 4.3 bootloader? I am so paranoid I'll end up picking something for 4.4.2, like I was about to do now. :S
Thaelern said:
Could you be so kind and to link me to a rom that works for 4.3 bootloader? I am so paranoid I'll end up picking something for 4.4.2, like I was about to do now. :S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2495688
Post 1 choose V6
Or
http://forum.xda-developers.com/showthread.php?t=2472301
Post 3
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 1 v3.0
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 2 V5
There's a lot more in developement section. Just take a look there. Most developers still providing link for 4.3
Rosli59564 said:
http://forum.xda-developers.com/showthread.php?t=2495688
Post 1 choose V6
Or
http://forum.xda-developers.com/showthread.php?t=2472301
Post 3
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 1 v3.0
Or
http://forum.xda-developers.com/showthread.php?t=2498687
Post 2 V5
There's a lot more in developement section. Just take a look there. Most developers still providing link for 4.3
Click to expand...
Click to collapse
Alright.. Time to get things done right! So just being sure I do it alright. I pick this one; http://forum.xda-developers.com/show....php?t=2498687
Download the one for 4.3 bootloader, once download I place the zip folder on my SD card
- Then boot into Recovery mode, wipe phone clean, and then install the rom directly from inside of Recovery mode?
I recently bit off more than I could chew with my S4 (I337). I had 4.4.2 KitKat on it and wanted to root it to add teathering. I decided thought there was no root for 4.4.2 so I thought I would try downgrading to 4.3 then root. This seemed best because I didn't like the way the SD card is handled in 4.4.2 and some of my apps (like ftp server) have stopped working.
When I got the phone back up from flashing with Odin it says it has version 4.3. My WiFi will not turn on. If I slide the switch to on it slides right back to off and the phone tells me that an operation was block (can't remember the full verbage. I have installed and attempted to install many things on my phone. I have used recovery mode / Odin3 and Kies (Kies doesn't allow much).
At this point I just would like to get my phone back to 4.4.2 with the WiFi working. Then I can restore my backup and be back to square one with a lesson learned.
I have an I337 that currently thinks it has version 4.3 on it. The baseband version is I337UCUFNC1 currently. The build number is JSS15J.I337UCUEMK2.
If anyone can help I would greatly appreciate it. I have read and tried many things over a two day period and finally decided to ask for help.
Had this issue before on my Bell Canada S4, but don't recall exact way to fix it.
Think the solution was to find an older (might be newer) stock. I think I used a different version like the Telus Canada version as well and it ended up working. Then you update through kies after.
jbrudda said:
I recently bit off more than I could chew with my S4 (I337). I had 4.4.2 KitKat on it and wanted to root it to add teathering. I decided thought there was no root for 4.4.2 so I thought I would try downgrading to 4.3 then root. This seemed best because I didn't like the way the SD card is handled in 4.4.2 and some of my apps (like ftp server) have stopped working.
When I got the phone back up from flashing with Odin it says it has version 4.3. My WiFi will not turn on. If I slide the switch to on it slides right back to off and the phone tells me that an operation was block (can't remember the full verbage. I have installed and attempted to install many things on my phone. I have used recovery mode / Odin3 and Kies (Kies doesn't allow much).
At this point I just would like to get my phone back to 4.4.2 with the WiFi working. Then I can restore my backup and be back to square one with a lesson learned.
I have an I337 that currently thinks it has version 4.3 on it. The baseband version is I337UCUFNC1 currently. The build number is JSS15J.I337UCUEMK2.
If anyone can help I would greatly appreciate it. I have read and tried many things over a two day period and finally decided to ask for help.
Click to expand...
Click to collapse
Root, install safestrap then flash this ROM and you will be good to go: http://forum.xda-developers.com/showpost.php?p=52167774&postcount=3
Thanks
muniz_ri said:
Root, install safestrap then flash this ROM and you will be good to go: http://forum.xda-developers.com/showpost.php?p=52167774&postcount=3
Click to expand...
Click to collapse
Quite a few steps in those threads but I got it working again. I really appreciate all the help/advice given. Now to decide if I want to remove the safestrap screen on boot. Again Thanks.
Same problem,need help plz
Hi guys,
I have the same problem as jbrudda.i wiped everything using Odin3_v3.09 and AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar . and now my wifi is not working. when i try to turn it on a security message pop up (the device has detected an application attempting to perform actions that are not permitted these actions have been blocked)and ask me to reboot, then it does a factory reset on its own. but the problem is still there no wifi. my baseband is diffrent than jbrudda's. mine is I337UCUAMDB. can someone plz help. thank you
karim8888 said:
Hi guys,
I have the same problem as jbrudda.i wiped everything using Odin3_v3.09 and AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar . and now my wifi is not working. when i try to turn it on a security message pop up (the device has detected an application attempting to perform actions that are not permitted these actions have been blocked)and ask me to reboot, then it does a factory reset on its own. but the problem is still there no wifi. my baseband is diffrent than jbrudda's. mine is I337UCUAMDB. can someone plz help. thank you
Click to expand...
Click to collapse
Wifi does not work because of the modem/kernel mismatch, i.e. MDB modem and MK2 kernel. Not sure what your goal was when you began flashing your phone but since you fortunately did not flash teh MK2 bootloader you are still able to locate the MDB full odin tar and flash back to stock which will resolve your issue.
muniz_ri said:
Wifi does not work because of the modem/kernel mismatch, i.e. MDB modem and MK2 kernel. Not sure what your goal was when you began flashing your phone but since you fortunately did not flash teh MK2 bootloader you are still able to locate the MDB full odin tar and flash back to stock which will resolve your issue.
Click to expand...
Click to collapse
I did Root it with saferoot and safestarp.the wifi didnt work so i had to find a script here on xda and i run it throughout universal init.d . i didnt like the way my phone was running . so i decided to unroot it . so you think im using the wrong TAR file ???
karim8888 said:
I did Root it with saferoot and safestarp.the wifi didnt work so i had to find a script here on xda and i run it throughout universal init.d . i didnt like the way my phone was running . so i decided to unroot it . so you think im using the wrong TAR file ???
Click to expand...
Click to collapse
It depends on what you are trying to accomplish. Are you trying to upgrade to MK2 or higher while maintaining your unlocked MDB bootloader?
muniz_ri said:
It depends on what you are trying to accomplish. Are you trying to upgrade to MK2 or higher while maintaining your unlocked MDB bootloader?
Click to expand...
Click to collapse
I'm just trying to take it back to the why it was. and upgrade to kitkat. i have now build number JSS15J.I337UCUEMK2 baseband : I337UCUAMDB
what do you think i should do?? I appreciate your help.
karim8888 said:
I'm just trying to take it back to the why it was. and upgrade to kitkat. i have now build number JSS15J.I337UCUEMK2 baseband : I337UCUAMDB
what do you think i should do?? I appreciate your help.
Click to expand...
Click to collapse
If you don't care about losing your MDB unlocked bootloader you can get to the latest kitkat firmware by flashing the NB1 full odin tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223, then once flashing is complete go to settings/more/about phone/software update then take the ota update to NC1 which is the latest kitkat version for our phone.
But what I would do is keep your unlocked MDB bootloader and since you already flashed the MK2 AP file you can get your phone running well again by flashing the MK2 modem: https://mega.co.nz/#!pwESna5I!YK7EKG37xXIG1ReB-Z-mfSMoXNkXQ9t2EdMK9ofgJKg
From there, there are still a number of options available to get to kitkat which I won't get into.
muniz_ri said:
If you don't care about losing your MDB unlocked bootloader you can get to the latest kitkat firmware by flashing the NB1 full odin tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223, then once flashing is complete go to settings/more/about phone/software update then take the ota update to NC1 which is the latest kitkat version for our phone.
But what I would do is keep your unlocked MDB bootloader and since you already flashed the MK2 AP file you can get your phone running well again by flashing the MK2 modem: https://mega.co.nz/#!pwESna5I!YK7EKG37xXIG1ReB-Z-mfSMoXNkXQ9t2EdMK9ofgJKg
From there, there are still a number of options available to get to kitkat which I won't get into.
Click to expand...
Click to collapse
I will try this steps and let you know.thanks a lot.
It worked "muniz_ri". Thanks a lot for your help, I really appreciate it. :laugh::good:
karim8888 said:
It worked "muniz_ri". Thanks a lot for your help, I really appreciate it. :laugh::good:
Click to expand...
Click to collapse
Hey guys.
I lost al sounds on my phone now.Wifi is running , I thought the fix worked but the sound is out now. any suggestions???
Thank you.
jbrudda said:
I recently bit off more than I could chew with my S4 (I337). I had 4.4.2 KitKat on it and wanted to root it to add teathering. I decided thought there was no root for 4.4.2 so I thought I would try downgrading to 4.3 then root. This seemed best because I didn't like the way the SD card is handled in 4.4.2 and some of my apps (like ftp server) have stopped working.
When I got the phone back up from flashing with Odin it says it has version 4.3. My WiFi will not turn on. If I slide the switch to on it slides right back to off and the phone tells me that an operation was block (can't remember the full verbage. I have installed and attempted to install many things on my phone. I have used recovery mode / Odin3 and Kies (Kies doesn't allow much).
At this point I just would like to get my phone back to 4.4.2 with the WiFi working. Then I can restore my backup and be back to square one with a lesson learned.
I have an I337 that currently thinks it has version 4.3 on it. The baseband version is I337UCUFNC1 currently. The build number is JSS15J.I337UCUEMK2.
If anyone can help I would greatly appreciate it. I have read and tried many things over a two day period and finally decided to ask for help.
Click to expand...
Click to collapse
I told you not to drink and root.
jbrudda said:
Quite a few steps in those threads but I got it working again. I really appreciate all the help/advice given. Now to decide if I want to remove the safestrap screen on boot. Again Thanks.
Click to expand...
Click to collapse
excited to give this a try. rooted with the downgrade method a couple months ago but left with a non-wifi device. my only issue is that the thread says it's for I337UCUFNC1 and our devices are on jss15j.i337ucuemk2. will this fix still work? I've heard on other threads on the subject that the modem kernel doesn't match up with the flashed rom or build number or something.
bux
karim8888 said:
Hi guys,
I have the same problem as jbrudda.i wiped everything using Odin3_v3.09 and AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar . and now my wifi is not working. when i try to turn it on a security message pop up (the device has detected an application attempting to perform actions that are not permitted these actions have been blocked)and ask me to reboot, then it does a factory reset on its own. but the problem is still there no wifi. my baseband is diffrent than jbrudda's. mine is I337UCUAMDB. can someone plz help. thank you
Click to expand...
Click to collapse
Do you already fix it??? cause i have the same problem
Same question, different thread!
Not even an hour ago did I answer the same question in a different thread: How do I get WiFi working on my S4?
Well here you go.
My original answer: http://forum.xda-developers.com/gal...-4-4-2-nb1-t2850878/post54978150#post54978150
The problem is, in order to get WiFi working, you need to install the NB1 modules, but to do that, you need to install Safestrap. However, you can not install Safestrap because the app keeps closing on you. There is a simple fix to this, which I will explain later. For now, just read this WHOLE post BEFORE you do anything, and keep in mind that I am NOT held liable if you mess up your phone. Use this at your own risk.
1.) Root your phone
If you're already rooted with something like SuperSU or Superuser, skip this. If not, read ahead. Download and install the Towelroot APK file attached to this post, open it, and click 'make it ra1n'. If your phone didn't reboot, now you have root (they need to trademark that). Now, down below, I also included the APK for SuperSU. Download and install it. Now open it. When you open it, let it install the 'Normal' way, not via the 'TWRP/CWM' way. Also, when it asks you to disable KNOX, say yes, wait a couple of minutes (it will still be loading) and reboot your phone. Open up SuperSU again, click 'Yes' to disable KNOX again, and now you have a good base to start from.
2.) Install Safestrap AFTER fixing the error
The error your are getting is easily fixed. Go to the Play Store and install 'SELinux Mode Changer'. Open it, grant it root access, and change the mode to 'Permissive'. Now, open up Safestrap again (you mentioned you already installed it), and it shouldn't force close. Click 'Install', and if the 'Reboot to Recovery' option below is not grayed out after that then it worked.
3.) Download and install the NB1 modules
On your phone, download the included NB1 modules ZIP file I attached for you, and once that is done you need to reboot. After the Galaxy S4 logo, you'll see a screen that says 'SAFESTRAP: DISABLED' and there will be a little robot. TIP: To enter Safestrap, press the menu button (physical, hardware key) under 'Recovery' at that screen. To continue to Android, press the back key (again, physical) under the 'System' tab. For now, press the menu button under 'Recovery'. Now, click 'Install' which should be in red, click 'Add zips', and navigate to your Downloads folder. Now click on the NB1 modules ZIP you just downloaded. Swipe to install, and reboot. This time, hit the back key under 'System'.
All done!
Now, Android should (and will) boot up, and you'll have working WiFi! If, for some odd reason, you don't have WiFi- do NOT panic! Just search around for the MF3 modules and flash those! All is good, all is good. A lot of this guide was taken from my post about my personal method of SIM unlocking the AT&T Galaxy S4 without the dialer codes or an AT&T SIM. It was just modified a little to work for you.
Remember, hit thanks!
Click to expand...
Click to collapse
Those are my exact words. Also, the attached files (NB1 modules, SuperSU, Towelroot, etc.) can be found attached to my post in the link above. Have a good night, and best of luck! :good::good::good:
Had the Wifi Not Working - Fixed
muniz_ri said:
If you don't care about losing your MDB unlocked bootloader you can get to the latest kitkat firmware by flashing the NB1 full odin tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223, then once flashing is complete go to settings/more/about phone/software update then take the ota update to NC1 which is the latest kitkat version for our phone.
But what I would do is keep your unlocked MDB bootloader and since you already flashed the MK2 AP file you can get your phone running well again by flashing the MK2 modem: https://mega.co.nz/#!pwESna5I!YK7EKG37xXIG1ReB-Z-mfSMoXNkXQ9t2EdMK9ofgJKg
From there, there are still a number of options available to get to kitkat which I won't get into.
Click to expand...
Click to collapse
I just flashed I337MK2StockModem.tar.md5 and now it works!! I'm on the MK2 and rooted with saferoot and safestrap recovery 3.72
iqcomputers said:
I just flashed I337MK2StockModem.tar.md5 and now it works!! I'm on the MK2 and rooted with saferoot and safestrap recovery 3.72
Click to expand...
Click to collapse
See the thread I started with a similar problem.
http://forum.xda-developers.com/galaxy-s4-att/help/rogers-samsung-s4-4-2-2-i337m-wifi-t3256535
Would I be able to use this fix?
my galaxy s 4 is running 4.3 since the new update for 4.4.2 came out it tried to install itself but could not I cannot reset or update my phone for some reason I rooted my phone and also install safe strap none of the roms work with safe strap either I cannot install anything on my phone or update I also tried using odin to install the new update but no luck it says fail i unrooted my phone and tried to root it with odin but no luck. The reason I am trying to install a new software on it its because ever since the new update tried to install itself I think it messed with the calling function everytime i receive or send a call I cannot be hear or I cannot hear the other person all speakers work. When I had safestrap on I could do a factory reset and everything would work fine but then it would stop working again I dont think its speaker problems but if anyone can help me with my problem it would be great ><
I also voided my warrante when I tried to install stock firm ware 4.4.2 through odin it gave a binary count 1 and stuff and it said on the dowload mode warrante is void as well when i boot up my phone it says custom I dont know how to get rid of that either
trunks_ss2 said:
my galaxy s 4 is running 4.3 since the new update for 4.4.2 came out it tried to install itself but could not I cannot reset or update my phone for some reason I rooted my phone and also install safe strap none of the roms work with safe strap either I cannot install anything on my phone or update I also tried using odin to install the new update but no luck it says fail i unrooted my phone and tried to root it with odin but no luck. The reason I am trying to install a new software on it its because ever since the new update tried to install itself I think it messed with the calling function everytime i receive or send a call I cannot be hear or I cannot hear the other person all speakers work. When I had safestrap on I could do a factory reset and everything would work fine but then it would stop working again I dont think its speaker problems but if anyone can help me with my problem it would be great ><
I also voided my warrante when I tried to install stock firm ware 4.4.2 through odin it gave a binary count 1 and stuff and it said on the dowload mode warrante is void as well when i boot up my phone it says custom I dont know how to get rid of that either
Click to expand...
Click to collapse
There are custom roms designed to work with Safestrap.
If you want to use the stock rooted rom, you need to use the odin.
Sometime, if there is a conflict between the firmware/bootloader and your modem or between kernel and firmware, there could be problem not getting wifi or call did not work.
Please tell me about your phone.
1. model
2. Baseband
3. Kernel version
3, build number.
sway8966 said:
There are custom roms designed to work with Safestrap.
If you want to use the stock rooted rom, you need to use the odin.
Sometime, if there is a conflict between the firmware/bootloader and your modem or between kernel and firmware, there could be problem not getting wifi or call did not work.
Please tell me about your phone.
1. model
2. Baseband
3. Kernel version
3, build number.
Click to expand...
Click to collapse
model-----sgh 1337 ATT
bb-----1337ucuemk2
kernel------2.4.0-1921628
built #--------jss15j.i337ucumk2
thanks for replying ><
I tried using several different roms but they woulnt boot up with ss but none would boot up
trunks_ss2 said:
model-----sgh 1337 ATT
bb-----1337ucuemk2
kernel------2.4.0-1921628
built #--------jss15j.i337ucumk2
thanks for replying ><
I tried using several different roms but they woulnt boot up with ss but none would boot up
Click to expand...
Click to collapse
You are still on MK2 firmware/bootloader. There must be an error in your software that would prevent you from getting the OTA.
Since you are in MK2 the safestrap version you are using must be 3.71.
You are using the rooted rom so that you see the custom sign every time you boot. I am seeing that sign every time I boot my phone too.
Be patient and let's go step by step.
First try to install the stock MK2 files and see whether you phone works. All the files you need, all the instructions you need to follow, all the options that you can choose can be found here.
I would choose MK2 all in one. Flash it with Odin see the phone is working.
sway8966 said:
You are still on MK2 firmware/bootloader. There must be an error in your software that would prevent you from getting the OTA.
Since you are in MK2 the safestrap version you are using must be 3.71.
You are using the rooted rom so that you see the custom sign every time you boot. I am seeing that sign every time I boot my phone too.
Be patient and let's go step by step.
First try to install the stock MK2 files and see whether you phone works. All the files you need, all the instructions you need to follow, all the options that you can choose can be found here.
I would choose MK2 all in one. Flash it with Odin see the phone is working.
Click to expand...
Click to collapse
okay thank you so much!! i will try it and re post when iam done ><
Pokmemon Go/ Uninstalled Kingroot and derooted boot screen custom & gear icon on boot
Hi, so a while ago I tried using kingroot and installed it for a little bit and used root to uninstall some factory installed apps like amazon, etc. then when i decided i did not want root anymore. i used the kingroot app to remove root and then uninstalled the kingroot application.
then i downloaded a root checker app to see if i was rooted. i was not.
now whenever i boot up my phone it says samsung and then the word custom with a gear icon below it.
now when i tried the newest version of pokemon go version 0.37.0 it says it cannot run on my device cause apparently it thinks i am rooted.
is there anyway to solve this? other than a factory reset?
I don't think a factory reset would help either.
You'd have to delete every trace of root left on your device, and kingroot probably left some files behind.
Unless you can find them, the most sure method is to flash another ROM (stock) though Odin.
I believe a custom kernel would also work, or the stock boot.img of your current ROM.
GDReaper said:
I don't think a factory reset would help either.
You'd have to delete every trace of root left on your device, and kingroot probably left some files behind.
Unless you can find them, the most sure method is to flash another ROM (stock) though Odin.
I believe a custom kernel would also work, or the stock boot.img of your current ROM.
Click to expand...
Click to collapse
ok i have the sch i545 on verizon. which program do i use to find and delete the files tha kingroot may have left behind. also where do i get this "rom"?
Rhalium said:
ok i have the sch i545 on verizon. which program do i use to find and delete the files tha kingroot may have left behind. also where do i get this "rom"?
Click to expand...
Click to collapse
The ROM you can get from Sammobile. As for the files left behind, I don't know how kingroot handles those, but to access and delete them you would have to be rooted.
GDReaper said:
The ROM you can get from Sammobile. As for the files left behind, I don't know how kingroot handles those, but to access and delete them you would have to be rooted.
Click to expand...
Click to collapse
ok, i powered down the phone and held the power and volume up buttons to get into recovery mode and then i selected wipe cache partition. and then rebooted. it seems that has solved the custom and gear icon below on when it first boots up. cause now it shows samsung galaxy s4 which is correct. but when i try pokemon go 0.37.0 it still says this device or software is not supported what should i do now? i heard somewhere that you can use xposed framework module
GDReaper said:
The ROM you can get from Sammobile. As for the files left behind, I don't know how kingroot handles those, but to access and delete them you would have to be rooted.
Click to expand...
Click to collapse
ok this is weird. i hold power and vol.up button to get into recovery, then i see flash that says no order i think. then i wipe cache partion. then i power off and boot and the custom ans gear icon is no there its just says samsung galaxy s4 on boot like it supposed to. but then when i go into poke go version 0.37.0 it still wont let me play cause it think im rooted and then i power off and boot up again and there it is again. the custom word and then the gear icon below it. should i do a backup of my phone ans do a factory reset? will that solve it?
Rhalium said:
ok this is weird. i hold power and vol.up button to get into recovery, then i see flash that says no order i think. then i wipe cache partion. then i power off and boot and the custom ans gear icon is no there its just says samsung galaxy s4 on boot like it supposed to. but then when i go into poke go version 0.37.0 it still wont let me play cause it think im rooted and then i power off and boot up again and there it is again. the custom word and then the gear icon below it. should i do a backup of my phone ans do a factory reset? will that solve it?
Click to expand...
Click to collapse
I already told you that a factory reset does not unroot.
If you want to completely unroot, flash the stock ROM.
If you don't want that, downgrade to Pokémon version 0.35.
0.37 has not even been officially released yet. I mean, I don't even have it on the play store and it's the same for many others.
PS: Xposed also needs root.
GDReaper said:
I already told you that a factory reset does not unroot.
If you want to completely unroot, flash the stock ROM.
If you don't want that, downgrade to Pokémon version 0.35.
0.37 has not even been officially released yet. I mean, I don't even have it on the play store and it's the same for many others.
PS: Xposed also needs root.
Click to expand...
Click to collapse
ok thanks, and do i need a specific version of this stock rom? sorry am new to this rooting and rom and stock firmware and bootloader and such.
also it seems there pushing the new update out slowly. also i think the older versions will no longer work soon once the newwer update is firnly established.
Rhalium said:
ok thanks, and do i need a specific version of this stock rom? sorry am new to this rooting and rom and stock firmware and bootloader and such.
also it seems there pushing the new update out slowly. also i think the older versions will no longer work soon once the newwer update is firnly established.
Click to expand...
Click to collapse
You need one for your specific phone model (AT&T or Verizon I assume).
GDReaper said:
You need one for your specific phone model (AT&T or Verizon I assume).
Click to expand...
Click to collapse
yes my phone is verizon. do i need to hook up my phone to a computer in order to flash? will i lose all of the data on my phone when i flash the ROM to it?
Rhalium said:
yes my phone is verizon. do i need to hook up my phone to a computer in order to flash? will i lose all of the data on my phone when i flash the ROM to it?
Click to expand...
Click to collapse
Yes and yes.
GDReaper said:
Yes and yes.
Click to expand...
Click to collapse
ok how do i get the stock boot.img of my current rom? also dumb question, could you explain what a rom is? also is odin a program that i use on my laptop to flash the rom to my phone while it is connected to my laptop? also what is sammmobile? and if you say i should get a rom, is there a specific version of the rom that i should get? sorry for dumb questions.
GDReaper said:
I already told you that a factory reset does not unroot.
If you want to completely unroot, flash the stock ROM.
If you don't want that, downgrade to Pokémon version 0.35.
0.37 has not even been officially released yet. I mean, I don't even have it on the play store and it's the same for many others.
PS: Xposed also needs root.
Click to expand...
Click to collapse
ok now do you mean a firmware or rom? am i at the right place see screencap. also how large should these files be? i already have odin downloaded. i am using this guide: http://downloadstockrom.com/download-android-4-4-2-stock-rom-for-samsung-galaxy-s4-sch-i545-2.html
GDReaper said:
I don't think a factory reset would help either.
You'd have to delete every trace of root left on your device, and kingroot probably left some files behind.
Unless you can find them, the most sure method is to flash another ROM (stock) though Odin.
I believe a custom kernel would also work, or the stock boot.img of your current ROM.
Click to expand...
Click to collapse
http://smallbusiness.chron.com/use-odin-android-28504.html
this website says i need a pit file and a tar file. i already found the pit file here on xda which was a few megabytes and am downloading the tar file from the site seen in the screencap below. are these the correct files i should be using?
Rhalium said:
http://smallbusiness.chron.com/use-odin-android-28504.html
this website says i need a pit file and a tar file. i already found the pit file here on xda which was a few megabytes and am downloading the tar file from the site seen in the screencap below. are these the correct files i should be using?
Click to expand...
Click to collapse
You don't need a pit file. And if the files are wrong, the instalation will just fail.
If that's the firmware you had previously, then it's ok.
GDReaper said:
You don't need a pit file. And if the files are wrong, the instalation will just fail.
If that's the firmware you had previously, then it's ok.
Click to expand...
Click to collapse
ok so i just use the tar file i got from the rwilco12 website and use that with odin and my phone?
Rhalium said:
ok so i just use the tar file i got from the rwilco12 website and use that with odin and my phone?
Click to expand...
Click to collapse
Yes. But if the firmware is older than what you had on the phone (5.0 > 4.3) it may fail to flash.
GDReaper said:
Yes. But if the firmware is older than what you had on the phone (5.0 > 4.3) it may fail to flash.
Click to expand...
Click to collapse
ok when i bought the phone it was on 4.4.2 or something and then when i got it i soon updated it to 5.0. so now you are saying to use it with this? http://androidromupdate.com/2015/08...y-s4-sch-i545-ota-update-with-loads-of-fixes/
the 5.0 lollipop one right? also is there a diference between a stock firmware and a stock rom or are they the saem thing?
Rhalium said:
ok when i bought the phone it was on 4.4.2 or something and then when i got it i soon updated it to 5.0. so now you are saying to use it with this? http://androidromupdate.com/2015/08...y-s4-sch-i545-ota-update-with-loads-of-fixes/
the 5.0 lollipop one right? also is there a diference between a stock firmware and a stock rom or are they the saem thing?
Click to expand...
Click to collapse
Stock ROM and stock firmware is the same thing.
GDReaper said:
Stock ROM and stock firmware is the same thing.
Click to expand...
Click to collapse
Have you even looked at any of the linkes or screencaps ive included in these posts? so this is the tar file i should be using to put my s4 back to stock? it says may 21 2013. see screencap. i got it from that rwilco 12 site.
My s4 was rooted about a year ago with the logo SAMSUNG and Unlocked with an open lock below it when it boots up. I gave this phone to my girlfriends daughter and forgot to tell her not to try and update it. I don't remember the way i rooted it or what software it had on it at the time.
So when I go to recovery after it loads into an AT&T logo and tries to install it and it gets to 24%. After this it bootloops. Any help would be appreciated. My phone model is SGH-I337 , also not sure of what the original firmware is.
StephenTiz said:
My s4 was rooted about a year ago with the logo SAMSUNG and Unlocked with an open lock below it when it boots up. I gave this phone to my girlfriends daughter and forgot to tell her not to try and update it. I don't remember the way i rooted it or what software it had on it at the time.
So when I go to recovery after it loads into an AT&T logo and tries to install it and it gets to 24%. After this it bootloops. Any help would be appreciated. My phone model is SGH-I337 , also not sure of what the original firmware is.
Click to expand...
Click to collapse
Open lock symbol means your phone is rooted not unlocked.
If you could go to the recovery mode (voloume-up+home+power) it would tell you your firmware version. You could try clear cache, factory reset in recovery mode. If it still gives you the bootloop, you might need to flash the firmware via odin.
You can find instructions and necessary files in here and here.
No recovery options
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
No recovery options
sway8966 said:
Open lock symbol means your phone is rooted not unlocked.
If you could go to the recovery mode (voloume-up+home+power) it would tell you your firmware version. You could try clear cache, factory reset in recovery mode. If it still gives you the bootloop, you might need to flash the firmware via odin.
You can find instructions and necessary files in here and here.
Click to expand...
Click to collapse
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
StephenTiz said:
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
Click to expand...
Click to collapse
One reason I asked you to go to the recovery option was to know what version of firmware you were on before .
Do you remember you were on jelly bean or kick-kat or lollipop? If you do you can find the firmware for jelly bean and kit-kat on the links I mentioned in the previous message.
If you could not recall your firmware, the latest odin flashable firmware we have is kit-kat NB1.
You can flash that one to revive your phone. Then use twoel root to root the phone. After that you can go to lollipop if you want. All the instructions are there.
Woop Woop!
sway8966 said:
One reason I asked you to go to the recovery option was to know what version of firmware you were on before .
Do you remember you were on jelly bean or kick-kat or lollipop? If you do you can find the firmware for jelly bean and kit-kat on the links I mentioned in the previous message.
If you could not recall your firmware, the latest odin flashable firmware we have is kit-kat NB1.
You can flash that one to revive your phone. Then use twoel root to root the phone. After that you can go to lollipop if you want. All the instructions are there.
Click to expand...
Click to collapse
It worked. I have tried so many different firmware and kit-kat NB1 worked perfectly. Thank you so much, my girlfriends daughter will be so happy. I think i will leave it unrooted for now. I hope this post helps someone else in the future.
StephenTiz said:
It worked. I have tried so many different firmware and kit-kat NB1 worked perfectly. Thank you so much, my girlfriends daughter will be so happy. I think i will leave it unrooted for now. I hope this post helps someone else in the future.
Click to expand...
Click to collapse
I am glad that it works out for you.
Rooting is so easy from that point. Just get towel root and root it. The link also included in my previous post. After the root you might need to disable the AT&T OTA update too. The instructions are also in that post too.