debugging required. - Galaxy Note 3 Q&A, Help & Troubleshooting

hello i have a note 3 smn9005..it is rooted and running pac man rom currently the issue i am facing is that at any random times my screen starts flickering and then i have to reboot or sometimes i get the bsod...now this is not a rom specific issue because this happened to me with aosb rom too i switched to pac man hoping this issue would go away but it did not...i have asked around on the rom threads they wanted me to post the logs i have posted it but have got no response yet so hoping to find someone who can help me here....just to refresh the rom is pac man rom the kernel is the stock one which comes with the rom...the logs are attached below they show some errors when the flickering happens but i have no idea what those errors are and what they are referring too.

Related

please help!!! grainy screen of death

I have flashed rom after rom, kernel after kernel. And for some strange reason this screen pops up..and its random... please help I'm sorry if this is somewhere else...I'm panicked...I attached the photo below... it happens very sporadically not daily but right now this issue has resurfaced for me... any help other than telling me to research will help that's why iam asking
I have that problem randomly with my tablet. Never found a fix for it.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.

[Q] What is params.bin and can it mess up my phone or can it fix my bluetooth?

Hey guys,
I'm currently using OzcanRom and it's just great - strongly recommended!
My only issue is exactly the same issue as described in this post:
I'm facing a very strange problem as i'm unable to switch on my bluetooth... last week only i rooted my phone and installed CWM recovery...then i installed Custom Rom's like Hassan ROM, Omega ROM, Cyanogenmod 11 Rom, Pacman ROM etc etc just to check various Rom's and their features out.....At first i installed only one ROM at a time and den also dual booted two ROM's by romswitcher...While i was checking my phone once i discovered that my phone's Bluetooth is not turning ON...The toggle is only becoming light green and also from the settings its only showing turning Bluetooth On but it's unable to turn bluetooth On.....Now i googled my problem and read across various forums for solution...I tried various things also flashed my firmware to stock samsung but still bluetooth does not turn On...also i flashed with stock samsung firmware of feb and march 2014 and updated my phone over OTA but still the problem persists....i even installed latest perseus kernel while rooted but still could not turn my bluetooth ON.
I would be very grateful if someone can help me solve my problem and help me Switch ON my bluetooth as it is very needed aspect for my daily use.
My Version of S4 is i9500 with android kitkat 4.4.2. Also all my other features are working normally on custom ROM's too.
Click to expand...
Click to collapse
I too installed this Omega rom at some point and once I did that these problems started.
A user in that thread posted a reply in which he uploaded a file which he claims fixed his problem.
I really need my bluetooth to work again and would love to flash this file using Odin if it would fix the problem
BUT
I have no clue what implications flashing this file can have, can it mess other things up? I've spent the last four hours setting things up again in my new ROM and I would hate to have to do it again or even worse, cause some unsolvable problem with my phone.
I assume some of the developers here could help me out - should I run it?
Thanks!

[Q] Samsung Galaxy S4 i9500 Ozcan Rom v5.2 issue please help

Sorry im a new user in XDA
Just been using this rom for the past 1 week...... really loving the rom so stable and fast and such a depart from the stock rom:good:
But i have some issues regarding the following issues i know its not a big deal but still it kind of bugs me
the notification glitch and other regular stuff... i read the thread and all said to just flash the stock kernal in it after installing filemount ...which i did..applied the patch and flashed the kernel and brings me always in a bootloop ...
i heard the stock kernal has no issues is it just my phone or is others also there?.... well ri8 now im on omega kernel but really wish to go to stock kernal and remove that glitch kind of irritates me a lot..even the widget flashlight is also missing i know its not a big deal and all .. plz can you include in the next update
please give me a solution of kernal flash ..i did after applying the patch still got stuck in bootloop always tried 4-7 times already:crying:

[Q&A] [Kernel]***[D80*/LS/VS980/F320x] B14CKB1RD AOSP [1/18/15]***

Q&A for [Kernel]***[D80*/LS/VS980/F320x] B14CKB1RD AOSP [1/18/15]***
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel]***[D80*/LS/VS980/F320x] B14CKB1RD AOSP [1/18/15]***. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
4 cores working with the screen on... battery life....
stuck at logo after kernel flash
I am on the liquid milestone 3.2. I saw that this is the same kernel but updated version that came in the rom so i wanted to update. No matter
Now i am stuck in a boot loop. phone powers on, stays at the LG logo, goes no further. I can get to Download mode, but no recovery.
Is there a way to recover this thing with out having put a locked stock rom on it??
DT2W double tap to wake
I love the Kernal so far however i've got a question about the double tap to wake features. Is there a way to have the screen turn off by double tapping somewhere OTHER than the notification bar at the top of the screen? Also it takes me about 4 or 5 double taps to get the screen to actually wake up, any ideas on any of this ? Thanks!
Hear myself in the phone... rom or kernal problem?
hello love the work you guys do its exciting and interesting. Ive relatively recently started playing with custom roms and kernals etc. love this one because i get excellent battery life as well as a solid LTE signal (two things ive had trouble finding with lollipop so far.. might just be me). Anyway ive got an issue with hearing myself in my phone when im on the phone... its like everything i say approx half a second after i say it.. needless to say its rather annoying, is this a rom or kernal problem? volume settings issue? not sure.. Also my proximity sensor occasionally wont register that my ear is near it.. baaically the screen stays on if im say checking my voice mail or on the phone.. not sure why this happends.. Everything else works great.. some info: d801 lg g2, lastest rr build for lp and i have the lasest blackbird for lollipop. its a really solid combo and im loving it.. thanks for any information you may have
asustweaker said:
I am on the liquid milestone 3.2. I saw that this is the same kernel but updated version that came in the rom so i wanted to update. No matter
Now i am stuck in a boot loop. phone powers on, stays at the LG logo, goes no further. I can get to Download mode, but no recovery.
Is there a way to recover this thing with out having put a locked stock rom on it??
Click to expand...
Click to collapse
did you flash kitkat version or lollipop version? Sounds like you flashed lollipop version
Nicholi85 said:
I love the Kernal so far however i've got a question about the double tap to wake features. Is there a way to have the screen turn off by double tapping somewhere OTHER than the notification bar at the top of the screen? Also it takes me about 4 or 5 double taps to get the screen to actually wake up, any ideas on any of this ? Thanks!
Click to expand...
Click to collapse
Update the touch screen firmware....there's an echo call via android terminal emulator or in my updated version in synapse
Nicholi85 said:
hello love the work you guys do its exciting and interesting. Ive relatively recently started playing with custom roms and kernals etc. love this one because i get excellent battery life as well as a solid LTE signal (two things ive had trouble finding with lollipop so far.. might just be me). Anyway ive got an issue with hearing myself in my phone when im on the phone... its like everything i say approx half a second after i say it.. needless to say its rather annoying, is this a rom or kernal problem? volume settings issue? not sure.. Also my proximity sensor occasionally wont register that my ear is near it.. baaically the screen stays on if im say checking my voice mail or on the phone.. not sure why this happends.. Everything else works great.. some info: d801 lg g2, lastest rr build for lp and i have the lasest blackbird for lollipop. its a really solid combo and im loving it.. thanks for any information you may have
Click to expand...
Click to collapse
These are ROM related errors...the call echo especially... Depending on ROM I could help....also see if it still persists in my latest update
Love this kernal, and I flash when installing a new LP build, but I've been having problems lately. After initial setup or reboot I get the" NO UCI SUPPORT " message. I'm running LiquidSmooth's latest build for the LS980, is anyone else having this issue.
Run om g3 based roms?
VictorAKAx said:
Run om g3 based roms?
Click to expand...
Click to collapse
No. This kernel is for AOSP-based ROMs. G3 ROMs are stock-based.
Typos courtesy of my Ice Cold LG G2 (D803).
just flashed your kernel, got stuck in a boot loop.
VS980, liquidsmooth 3.2 milestone.
what can i do? was excited to try out your update
Great kernel, running super smooth on AICP.
Thanks!
He's working on the fix for cm 12.1.
I sent my files on hangouts, just wait
edit: figured it out
does anyone have a dt2w fix for vs980? i just flashed liquidsmooth 4.0 and everything was working fine, flashed the kernel and it broke my knock on support. i found the zip posted in the main kernel thread (this one) and twrp tells me the file is corrupted
perforatedpaper said:
does anyone have a dt2w fix for vs980? i just flashed liquidsmooth 4.0 and everything was working fine, flashed the kernel and it broke my knock on support. i found the zip posted in the main kernel thread (this one) and twrp tells me the file is corrupted
Click to expand...
Click to collapse
Use the 0 init method:http://forum.xda-developers.com/showpost.php?p=56948464&postcount=73
I'm using F320K with BlissPop v2.3 rom, when flash this kernel for lp 5.0.2, it cause loopboot. Pls up kernel fix for lolipop 5.1. Hope to see it soon. Thanks u
llamas612 said:
I'm assuming that those are 5.0 based, since they're from January, right?
Click to expand...
Click to collapse
I think they're KitKat based. I tried already and it caused my d800 to go in a boot loop.
I wonder if anyone has got, perhaps, the 5.1 d800 version? I'm getting kinda desperate since my fav rom switched to a kernel that makes my phone really really hot.
Really need a link to latest 5.1 B14ckB1rd kernel for D800 :/
Pls...

Problem with all CM 12 Roms I9500

hey everyone
so ... i decided not to flash any samsung rom again as they are like @ [email protected]!# !!!! they are extremely laggy and CM is awesome even with some bugs but i don't know why my device seems to be the only one which has this problem
after installing tean canjica rom at the begging i got no service then the signal appeared for about couple of seconds then no service again
and that never stops and 99.9999% of time is no serivce
tried 3 different modems with 3 different methods ( TWRP , CWM & odin )
but still no luck
ps. when i flash samsung stock the problem disappears but on TeamCanjica or Remix rom the problem appears
thanks for your time
DaRkEMpRoR said:
hey everyone
so ... i decided not to flash any samsung rom again as they are like @ [email protected]!# !!!! they are extremely laggy and CM is awesome even with some bugs but i don't know why my device seems to be the only one which has this problem
after installing tean canjica rom at the begging i got no service then the signal appeared for about couple of seconds then no service again
and that never stops and 99.9999% of time is no serivce
tried 3 different modems with 3 different methods ( TWRP , CWM & odin )
but still no luck
ps. when i flash samsung stock the problem disappears but on TeamCanjica or Remix rom the problem appears
thanks for your time
Click to expand...
Click to collapse
Hi,
Wait for new build comes up. I see on TeamCanjica's thread, the developer will update the ROM. I tested GearCM and no network problem (before I revert to Prism Barebone). The problems you mention above might apply on all CM based ROMs that using TeamCanjica's device tree until their sources updated.
Possibly workaround is to update your modem.

Categories

Resources