Related
********Please Mods remove thread if possible!! New Tatuyama fix (ext4) has been incorporated into SuperRooter by DesignGears ********
LINK: http://forum.xda-developers.com/showthread.php?t=751934
DISCLAIMER
DO IT ON YOUR OWN RISK.
ME OR ANYONE ELSE ON THIS FORUM IS NOT RESPONSIBLE FOR BRICKED/DEAD DEVICES AND/OR DEAD SD CARDS.
YOU SHOULD UNDERSTAND EVERY STEP IN THIS HOW-TO BEFORE ATTEMPTING TO FOLLOW.
**********EDIT LOG*******************
8/10/2010: Added Startup Issue Reversion
8/11/2010: Added Alternate Manual Method that might work better than AUTO
8/11/2010: Added Possible Method of Backing EXT2 Partition
Here everyone... I have been trying lag fixes all over the place and I always seem to have issues partitioning the external sd for the apps... so after so many attempts, this was BY FAR the best lag fix out there.... It doesn't rely on the externalsd for functionality.
Easy and nothing special needed.
The steps below are pretty good, but I did things a little different.
Copied the update.zip to my external sdcard.
Then used Root Explorer to copy the update.zip to my internal sd card.
(******Here is the updated filed: http://forum.xda-developers.com/attachment.php?attachmentid=376882&d=1281390347******)
Then I used ROM Manager (Reboot into Recovery) to boot into the Linux Loader
Then I said update using update.zip (not install update.zip)
Then Reboot
For some reason it didn't install busybox 1.17.1 so install it manually
(located: http://forum.xda-developers.com/showpost.php?p=7574130&postcount=229)
Make sure after you install busybox.apk that you go into busybox and check to MAKE SURE you are running 1.17.1 ONLY. You might have an older version or newer version but it must be 1.17.1; if different just click install.
After that follow the MCR Scripts below. (Took about 6 minutes to do everything)
*** If MCR Scripts DOES NOT show up, its probably because you don't have the non market install hack on your phone. In the update.zip you can find the apk and install via ADB, but I didn't do it this way. ******
(Original Thread! Alternate method on OP in link below! Some people say it worked better for them.)
http://forum.xda-developers.com/showpost.php?p=7587405&postcount=417
@Tayutama
I ran the Tayutama update.zip using the up+power+menu button method, it installed in seconds and I restarted the phone. I ran the benchmark but still got 8xx scores. I'm an Noob, so needed more thorough instructions. These are now given below. NOTE: THIS METHOD IS MUCH MORE NOOB FRIENDLY AND DOES NOT REQUIRE A PC OR USB DEBUGGING MODE.
EDIT I had realised I needed to launch the newly installed MCR app after restart and choose a lagfix file to run. I ran the file and 'all complete'. This worked a treat. Ran Quadrant and now have a top score of 2114 running on JM2. System is much snappier. This mod of RyanZA fix by Tayutama is the most noob friendly also. Full instructions as follows:
EDIT Requirements: Make sure your phone has 'superuser' app installed by checking your app list. If it isn't installed, you can use a newer beta version of Tayutama's update.zip
available at; http://forum.xda-developers.com/atta...4&d=1281437129
Full instructions:
1. The update.zip installs all the files needed. It is attached here; http://forum.xda-developers.com/atta...2&d=1281390347
2. Place it on your internal sdcard
3. Turn off your phone.
4. Hold down Up+powerbutton+Menubutton for a couple of seconds until u see the galaxy logo .
5. Use the up and down buttons to get to update.zip.
6. Press menu button on update.zip to select it
7. It installs root, correct busybox (1.17.1) as well as all the scripts needed for the fix and the 'MCR Scripts' app to run the scripts. (NOTE: This version does not install superuser.app which is needed, although the beta update.zip does, so read 'requirements' above if needed)
8. After install, the phone restarts.
9. Go to the newly installed 'MCR Scripts' application from the app list, open it and choose from 3 scripts. For example, Lagfix10024 is the 1gb ex2 version.
10. The script should run and take a few minutes.
11. You should see an 'all complete' prompt, and this means you can close the application.
12. Run quadrant to test if the fix was applied.
Originally Posted by Tayutama
Don't know if you mind me posting this here RyanZA, but i made a update.zip out of your script. NOTE THIS ONLY WORKS ON 2.1
What this update.zip file does is that it copies a few files to your internal sdcard and installs ASE which can be used to run .sh files without the need to use a terminal.
There are 3 scripts included:
LagFix1024.sh - Makes a 1GB file on /data
LagFix512.sh - Makes a 512MB file on /data
RemoveFix.sh - Removes the lagfix
This also includes BusyBox 1.17.1 so no need to install that first.
Testet this on JM1
Click to expand...
Click to collapse
********Alternate Method that might even work better!! ****************
All the files are located in the update.zip file that you need to download.
1. Connect phone to PC, make sure adb can see it:
adb devices
2. adb kill-server
3. adb push createlagfix.txt /sdcard/createlagfix.sh
4. adb push playlogos1 /sdcard/playlogos1
5. adb push userinit.sh /sdcard/userinit.sh
6. adb shell su -c "/system/bin/sh /sdcard/createlagfix.sh"
7. adb kill-server
8. adb reboot
************ Reverting back if there are boot up and black screen issues ****************
If you have black screen and doesn't boot into the desktop, this is the fix to return back to normal state:
To fix that problem:
1. Boot into Recovery Mode (Vol Up + Vol Down + Power) Let go of Power after you see AT&T.
2. Delete User Cache
3. Delete All User Data
4. Then see if your phone boots up
5. If your phone does boot up then navigate to Settings -> Security -> Factory Reset
6. After factory reset your phone should be useable again.
DO NOT INSTALL THIS UPDATE IF YOU DO NOT KNOW WHAT YOU ARE DOING.
**********Possible method of Backing up Your EXT2 Partition **********
BTW I would also perform a NANDROID Backup as well which can be done by using ROM Manager to boot into the Android Loader....
Nandroid does NOT back up the apps off your SD card.
AppsToSD (I'm speaking re MoDaCo's rom here) uses the ext2 partition on your SD card for the /data/app and /data/app-private folders, where your actual downloaded application files are kept. Nandroid does NOT back this up, and simply mounting your SD card and copying the files off also does not back this up.
The only way to back up these critical folders is to directly copy them to somewhere else. You can use command line or Droid Explorer.
If you want to use command line, do this from an ADB shell or terminal:
mkdir /sdcard/backup/
mkdir /sdcard/backup/app
mkdir /sdcard/backup/app-private
cp -r /data/app/* /sdcard/backup/app/
cp -r /data/app-private/* /sdcard/backup/app-private/
This will create two folders on your SD card: app and app-private, both in a folder called Backup. It will then copy the entire contents of your /data/app and /data/app-private folders to your SD card.
After you do this, back up the entire contents of your SD card as normal.
To restore the files after replacing/partitioning your SD card, head to this thread:
http://forum.xda-developers.com/showthread.php?t=585349
Click to expand...
Click to collapse
Quadrant score was 917 and was on stock roms.....
Now Quad score is 2193 and still on stock roms.....
Tested on 2.1 Update 1 Captivate
Baseband: I897UCJF6
slider2828 said:
Quadrant score was 917 and was on stock roms.....
Now Quad score is 2193 and still on stock roms.....
Tested on 2.1 Update 1 Captivate
Baseband: I897UCJF6
Click to expand...
Click to collapse
Does it show strong real world improvements?
good job explaining nothing. troll harder
So....
This is a ""one step"" that isn't one step... ?.. ?
Oh, and for anyone wondering....
This appears to be the ext2 fix.
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Zilch25 said:
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Click to expand...
Click to collapse
Thanks for confirming this. I am seeing strong real world improvements, too. Dolphin Browser HD is very snappy and everything seems a lot faster (I am on stock captivate, btw, couldn't get this to work on I9000 for some reason).
Only thing is you should back up frequently because it can be corrupted a lot more easily since it is on ext2.
hm... i applied the update in clockwork mod recovery, i have super user and the correct busybox version installed and rebooted the system. i went to the app list and could not find the "MCR SCRIPT" you mentioned i should be seeing... am i doing something wrong?
THat is weird I saw mine in the apps list.... its just called MCR with a green dog bowl and light bulb....
Woops sorry for the truncation in the quote.... I have attached the update.zip file that you need to download.... The update.zip file you used is probably a ROM Manager Update.zip, so just rename it and copy the new update.zip file to the internal sd....
Sorry.....
solufein said:
good job explaining nothing. troll harder
Click to expand...
Click to collapse
What the hell does that mean.... You saying it doesn't work? Why not try it and it is an EXT2 fix.
max_warheads said:
So....
This is a ""one step"" that isn't one step... ?.. ?
Oh, and for anyone wondering....
This appears to be the ext2 fix.
Click to expand...
Click to collapse
This isn't one step because I don't have the USB cable with me. I just had a USB adapter for the microsd and I can't boot into the linux loader correctly without the cable, so I used ROM Manager. It would have been easier if I did.
Zilch25 said:
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Click to expand...
Click to collapse
Yup it is but on the internal card. Are you sure its the same? Look at the OG thread, a LOT of people have tried it with great success....
darth_vato said:
Thanks for confirming this. I am seeing strong real world improvements, too. Dolphin Browser HD is very snappy and everything seems a lot faster (I am on stock captivate, btw, couldn't get this to work on I9000 for some reason).
Only thing is you should back up frequently because it can be corrupted a lot more easily since it is on ext2.
Click to expand...
Click to collapse
How do you back it up?
i updated the zip and rebooted used busy box and i dont have that MCR app
Bionicboto said:
i updated the zip and rebooted used busy box and i dont have that MCR app
Click to expand...
Click to collapse
Same instructions before, did you download the update.zip? I just added that instruction. Can you try again after that?
slider2828 said:
THat is weird I saw mine in the apps list.... its just called MCR with a green dog bowl and light bulb....
Woops sorry for the truncation in the quote.... I have attached the update.zip file that you need to download.... The update.zip file you used is probably a ROM Manager Update.zip, so just rename it and copy the new update.zip file to the internal sd....
Sorry.....
Click to expand...
Click to collapse
when you say put the update.zip into the phone... do i put it in the internal sd card root? or do i put it in the ROM MANAGER folder? when i choose apply update, it only gives me one option to update from: /sdcard/update.zip. i choose that it installs properly and i reboot. i still don't the app, lol.
i also have removed the the recovery-update.zip or renamed it and tried to reboot into recovery mode via ROM MANAGER but it doesn't let me do it because it can't find the zip. then i tried to put the update into the the ROM MANAGER folder and it says it can't the find update.
its still the same cant find the app i reboot to recovery apply sd card update.zip go to yes and it says installed reboot and its not there
arsinic said:
when you say put the update.zip into the phone... do i put it in the internal sd card root? or do i put it in the ROM MANAGER folder? when i choose apply update, it only gives me one option to update from: /sdcard/update.zip. i choose that it installs properly and i reboot. i still don't the app, lol.
i also have removed the the recovery-update.zip or renamed it and tried to reboot into recovery mode via ROM MANAGER but it doesn't let me do it because it can't find the zip. then i tried to put the update into the the ROM MANAGER folder and it says it can't the find update.
Click to expand...
Click to collapse
Sorry for the bad reply.
Rename the update.zip that is already on the internal sd cards root because that is ROM Managers using ROOT Explorer
Then copy the update.zip that you downloaded to the external SD card.
Then copy update.zip from the external sd card to the internal sd cards root.
Then use ROM Manager to reboot into the linux loader.
Hope that helps?
-Ken
slider2828 said:
Sorry for the bad reply.
The update.zip that you use download, copy it the the internal sd card's root... (Basically where ROM Manager update.zip was. Like you did Rename the update.zip that is already there, because that is ROM Managers).
Hope that helps?
Click to expand...
Click to collapse
hm... the only update.zip i have is in the Recovery Mod folder named: recovery-update.zip. the only update.zip i have in the sdcard root is the update.zip i downloaded from the your url and have been applying that as the update. i seem to be having the same problem as Bionicboto.
should i have the rom manager's update.zip in there also or it doesn't matter? and i also have no external sd card. is that something i need in order to get this update working properly?
Did you ever perform a backup with the ROM Manager? That usually creates a update.zip.....
Basically when I log into root explorer and click on SDCARD.... you should see the update.zip in that folder along with Android folder, busybox folder, clockworkmod folder, DCIM folder, downloads folder, etc etc....
slider2828 said:
Did you ever perform a backup with the ROM Manager? That usually creates a update.zip.....
Click to expand...
Click to collapse
i preformed a backup right before i did all this. i did notice the update.zip in there. i took it out and put in the update.zip you uploaded. do i need both in there?
thanks for the quick replies btw.
Nope... Try this... with ROM Manager,
Choose Flash ClockWorkMod Recovery and that will recreate the boot files for ROM Manager.... and also backup your current ROM again.
Then try the steps again.
OMG Dude I noticed you in oakland, I am in hayward/san leandro.... We can try after I get off work which is in 30 minutes. and then take 30 minutes to get back to SL....
You wanna meet at the starbux on marina?
Flashed and installed perfectly. Bumped my quadrant up to 2117. Good post, thanks.
HI Guys,
Maybe somewhat can help me out here, in my attempt to update my Acer A500, I may have in a kind of way bricked my phone. I attempted to replace wpa_supplicant file as per some of the instructions, needless to say the update failed and me in my pure genius figure I would simply factory reset and reboot. Which I ended up doing, the problem now is that the WIFI does not turn on and my tab has been unrooted, I no longer have any file explorer app on the phone and I can't download anything. Does anybody know how I can gain access to the root files so that I may revert back the old file, or somehow install an apk file from the mini sdcard or even get access to the internet via bluetooth or USB. Anything would be helpful.
FYI - I am trying to gain access to my root files using Android SDK, but I've always had problems getting any of my pc to find any of the android stuff when plugged in.
Ph0tin0 said:
HI Guys,
Maybe somewhat can help me out here, in my attempt to update my Acer A500, I may have in a kind of way bricked my phone. I attempted to replace wpa_supplicant file as per some of the instructions, needless to say the update failed and me in my pure genius figure I would simply factory reset and reboot. Which I ended up doing, the problem now is that the WIFI does not turn on and my tab has been unrooted, I no longer have any file explorer app on the phone and I can't download anything. Does anybody know how I can gain access to the root files so that I may revert back the old file, or somehow install an apk file from the mini sdcard or even get access to the internet via bluetooth or USB. Anything would be helpful.
FYI - I am trying to gain access to my root files using Android SDK, but I've always had problems getting any of my pc to find any of the android stuff when plugged in.
Click to expand...
Click to collapse
I was in this court just yesterday, swearing up and down for some reason.
You'll need the root explorer apk, gingerbreak apk and the original wpa_supplicant file posted all over XDA.
Download and install Android SDK. It will also make you download the Java SDK too before you install the Android one. Start installing the Android SDK. It will seem like it's going to take forever, but you really only need what's in the folders 2 minutes in.
Go into the program files folder where the SDK stuff is and rip the 3 ADB files out and place them in their own folder. Mine were in: c:\program files\android\android-sdk\platform-tools\
I took the 3 files out and placed them in c:\and\
Place the apks in the c:\and\ folder
Make sure the driver files are installed from the Acer website.
Make sure USB bugging and apps from outside sources are enabled in settings on the tab.
Plug the tab into the PC via USB.
Open up the command prompt and go to the c:\and\ folder
then type
adb install c:\and\rootexplorer.apk
ENTER
then
adb install c:\and\gingerbreak-v1.20.apk
ENTER
The apps should be now installed on the tab.
Then just transfer the wpa_supplicant file over and you're right where you need to be.
Make sure you change the permissions on the wpa_supplicant file like you did the first time (enable everything read/write/etc etc) by holding on the wpa_supplicant file that you paste.
rorytmeadows said:
Open up the command prompt and go to the c:\and\ folder
then type
adb install c:\and\rootexplorer.apk
ENTER
then
adb install c:\and\gingerbreak-v1.20.apk
ENTER
The apps should be now installed on the tab.
Then just transfer the wpa_supplicant file over and you're right where you need to be.
Make sure you change the permissions on the wpa_supplicant file like you did the first time (enable everything read/write/etc etc) by holding on the wpa_supplicant file that you paste.
Click to expand...
Click to collapse
You are my new hero, all this time I've been trying to get Android ADK to recognize my tablet, but to no success. All I had to do was run ADB, which Ironically I had done, but only to see if it recognizes my unit. I was not aware I can install apps with it.
I'm not worthy... I'm not worthy
A million thank you's, now to try and get 3.1 installed and hopefully Googel/android was smart enough to put in a stock file explorer.
Not working wifi hardware
Somewhat similar to what happened to this guy. But to be specific, I am using an acer a500 originally on a rooted ics 4.0.3, i remember using lucky patcher and using the custom patch on adobe flash player then i saw an update regarding busybox and superSU...i was able to install the busybox updater but not the superSU since i remembered i already had superuser. I opened superuser and then it updated...from then on...I lost my wifi...at start it was still there but it can't connect. also, i lost my root because i no longer am able to use titanium backup. double checking it, i downloaded a root checker and it displayed not properly rooted. seeing this, i thought it's been a long time since i've updated my rom so i might as well upgrade everything...my bootloader, kernel, rom. So i first degraded it by flashing to the full package stock HC 3.1 ROM (it had an old HC 3.1 bootloader). Then i noticed i can no longer turn on my wifi and use my old apps...I flashed it back to a NON-rooted stock ics 4.0.3 thinking it might fix it...but it did not. HELP please...
Ok, after messing around with 3.2 I decided to fix the rooting issues without downgrading. The problem with downgrading is it requires a SDCard and requires you to install a couple of programs and then to install an update.zip from the sdcard. I could not get half my ACER's to read and mount a sdcard, and some ACER's I have located in a remote office and trying to walk someone through the process was too painful. I tweaked the the downgrade tool's images to install 3.2 with root instead of downgrading it and jumping through hoops. All I did to the stock image is to copy the ash shell over to /system/xbin/su and set the sticky bit. Everything else is stock.
Update posted here, read thead http://forum.xda-developers.com/showpost.php?p=20654298&postcount=129
New version V4
-- The instructions are in a PDF document inside the download --
== Version V4 ==
-- Added /system/subin/su which is a backup (backdoor) root in case an OTA deletes the /system/xbin/su
-- Set permissons on the su root(#) tool so OTA's shouldn't be able to break it.
-- Added drivers for XP
Summary:
Version V4 is the same as V3 with the only difference being that there is a NEW backdoor script which has some additional features to protect root(#) from getting broken when you do an OTA. I also applied these to this flash image so you wouldn't have to add the additional protection yourself. V4 also has the drivers for XP included. However, when taking an OTA you should also install the backdoor for additional protection. However, you cannot leave the backdoor installed as it turns off sound. So having a little more protection just might save your root in case you take an OTA and forget to install the backdoor.
Download it here: http://www.multiupload.com/NS0X5TK4D1
Alternative download location:
http://depositfiles.com/files/c6pr69ri6
http://www.fileserve.com/file/s2wCQpN/root-3.2.1-V4.7z
http://www.filesonic.com/file/jTA7AMN
http://www.filejungle.com/f/vRnfK5/root-3.2.1-V4.7z
Which 3.2 update is it ? Fully working, no issues ? Good job. Is it power + volume down or volume up to go into recovery ? And is it possible to flash a custom kernel like Honeyvillain on this stock ROM ?
Thx
Has anybody ( including OP) tried this method?
It is the 3.2 OTA for WiFi that my Tablet picked up. It is total stock other than making a SU from the ash shell and putting it into /system/xbin.
Fully works, no issues, have used it on 8 ACER 500's with no issues.
To enter recover it is the left side of the volume button which is volume (-) oopps NOT (+) as I indicated.
Hah, saying Vol +/- is not intuitive on this device since when in landscape, Vol + is the "right" side, but in portrait mode Vol + is the "top" side.
no go
Hi, i can see my iconia uid from adb ( already installed in my pc) but
not from test.cmd, in the extracted package. Any ideas?
REPEATED STEPS 1-4 ( PER INSTRUCTIONS) ON 2 PC'S RUNNING W XP. SO FAR "NO GO" TEST.CMD CANNOT FIND PATH.... AND DOTNETDETECTER, THEREFORE, DOES NOT WORK.
will this wipe all the data on the tablet?
---------- Post added at 04:19 PM ---------- Previous post was at 03:40 PM ----------
JUGOMAN said:
Hi, i can see my iconia uid from adb ( already installed in my pc) but
not from test.cmd, in the extracted package. Any ideas?
Click to expand...
Click to collapse
same here i run the setup file and it installs but after i run test.cmd and it cant find it
Sorry about the test.cmd not working. The script just calls adb.exe to make sure it is working and I have it installed in another directory that I did not include. I posted, to the original message an attachment, it is called fix-Test.7z that fixes the test.cmd. You should be able to just unzip it into the directory you created and run the test. The archive includes the adb.exe and dll's so the test.cmd should work. If you have adb.exe working you really don't the test.cmd, but I found out when talking someone through it (over the phone) this made sure that adb.exe was installed and they had the tablet USB Debugging turned on.
And it is a quick and easy way to get the serial number which you need to flash it.
Thanks,
Let me know if you have any more issues.
does anyone know if flashing it this way will delete all your data on the tablet?
NO GO2
The attchment does fix the test.cmd "problem" but the next step, Dotnetdetecter, does not work. It re-installs the driver (?) then error "adb is old" or something like that. All packages in my computer's ADB are up to date. I think that the "target" directory in the DONETDETECTER IS NOT CORRECT. ANY IDEAS? btw GOOD WORK!!!!!
Many thanks for this. It is really easy like this. Keep up the great work.
UPDATE
Installed, booted, but no root. Previous rom( acer update) was3.2 Gen 2, now 3.2 Gen 1. was worth a try.. Thank you... tablet is working just fine, just no root
jimmkd84 said:
does anyone know if flashing it this way will delete all your data on the tablet?
Click to expand...
Click to collapse
Yea. I've never done this before so I'm wondering the same thing.
Also
Idk about this test thing but if u type 'adb devices' it'll show you which devices (if any) are connected. I always use that as a test when i use the adb to install apks.
bad adb
NO GO2 WROTE
The attchment does fix the test.cmd "problem" but the next step, Dotnetdetecter, does not work. It re-installs the driver (?) then error "adb is old" or something like that. All packages in my computer's ADB are up to date. I think that the "target" directory in the DONETDETECTER IS NOT CORRECT. ANY IDEAS? btw GOOD WORK!!!!!
Not sure what that would be. I just use the adb.exe and dlls that are in the fix.zip. Maybe you have a different version loaded?
ROOT IS NOT in the apps. It is in the adb shell.
What this does is allows you to connect to the device using adb.exe shell and you will get the $ prompt.
at the $ prompt type su and press enter. You will get # and be in su mode.
Now you can do whatever you would like. What would that be, you might ask? Well you could do the following:
1. mount system as rw
2. Push your favorite su tools to the device so they are listed in the apps (busybox etc).
Again this gets you to 3.2 with the ability to have a SU when connected via the adb shell. I left the building of the tools and custom CW to you guys to do as you wish. Here's something else you could do.
1. Shell to it, and issue the SU
2. Mount system as rw
3. Push your favorite tools to where you want (busybox etc)
4. Take the recovery.img (in the zip) and dd dump it to the recovery partition. This will put clockwork on the device (1.5).
a. You should probably run itsmagic too.
5. Get everything the way you want it.
6. Reboot to recovery and CW will load.
7. Now with CW 1.5 loaded, you can build and make copies of your ACER and make them available to anyone you like. CW 1.5 does NOT require an external SDCARD.
Sorry, if I did not make it clear that this is just a SU that you have to use from the command line. If someone wants to give me the links to a SU apk, busybox, etc they'd like included I'd do it. It would only take a few minutes as I got hundreds of these ACER's to flash for our company. I just wanted to get SU, but what the heck, I could build it out if someone would like it that way. ACER really pee'd me off with this, and guess what? They left the ability to gain root in the 3.2 100. Why the 'Sam Heck' did they change the 500 3.2 so you cannot get root?
So, anything I can do to help let me know. Also, If you never want ACER to send you another update I can tell you how to fix that too. All you have to do is the following:
1. Get to the adb shell $
2. type su to get the # prompt
3. Now mount system as rw by doing the following:
a. mount -t rfs -o remount,rw system /system
4. Now rename the update tool by doing the following:
a. mv /system/app/FDUpdater.apk /system/app/FDUpdater.apk.old
mv /system/app/FWupdateService.apk /system/app/FWupdateService.apk.old
5. To get OTA then just reverse the process if you ever want ACER and their OTA to break your fleet of ACER Tablets by pushing silly updates that they think you want then you can undo it. The last I knew, I owned these ACER Tablets and I don't take kindly to them changing something that I do NOT WANT CHANGED. They should be sued, matter of fact, I think they are violating federal laws by destroying data on MY tablets. Anyway, off my soapbox.
i have re run the new test.cmd and is working now, and have successfully run dotnetdetector but i dont want to proceed until someone can confirm if doing this will wipe all data on the tablet
appreciate it, great work btw dev!
---------- Post added at 05:05 PM ---------- Previous post was at 04:39 PM ----------
did this wipe the data on it?
Hello, may i use this procedure on my A501?
Thanks
I did NOT test on the 501 so I do not know. If it was me, I would take the 501 stock images and put them in the kitchen and root them and then replace the ones in my zip with those or better yet, use CW to flash it in.
I think the ACER 501 has cell phone data connection doesn't it? I don't think the stock for WiFi only would be a good idea.
What ACER did on the 3.2 update (my opinion) was removed the Gingerbreak exploit and they removed the adb root exploit (they left the adb root exploit in on the 100). This is what many OEM's did, however many allow you to flash your own easier than ACER seems to want to let us. So if you got 3.2 NON-ROOTED loaded then there is no way to 'hack' out a root (just yet).
So how do you root it? You have to make a custom ROM and flash it. Now ASUS/Motorola/Samsung/Toshiba all allow you to flash your own ROM if you know what you are doing.
ACER seems to hide how to put the tablet into flash mode (if someone knows please let me know). Even if you did flash it they do want those ROMS running so they take each partition and calculate the MD5Sum and write it to, I think, partition #7. Therefore, if you do figure out how to flash in a new boot image or system image the tablet will not boot because the MD5Sums will not match (if you brick your tablet this way you are fubar). Fortunately, someone wrote a tool called itsmagic which you can run to tell the tablet to rebuild these. But if you fubar brick it before you get itsmagic run, I don't know how you get into flash mode using the keys so you'd be up a creek.
So, the 411 skinny on rooting an ACER with 3.2 is to get 3.2 off the device. Fortunately, they made an earlier flashing tool to flash in 3.0. I would guess this leaked out as a way for people to reflash to stock when they have issues.
Once you are on 3.0, you now can use Gingerbreak or the adb root exploit to root it. Once rooted, you can get CW loaded. CW allows you to install your own ROM's. Without CW you can only install ROM's signed by ACER and without ROOT you cannot install CW.
So, if you flash to the 3.0 now you are 'back to the future' in 3.0, you can root and install CW so you can now install a custom ROM from your SDCard.
What I would do is go get the STOCK ROM from ACER for your 501 device.
Once you have the stock ROM, you can use the kitchen tools to unzip the ACER ROM and root it to your liking. Now, re-zip it, but you cannot sign it with an ACER certificate so it will only install using CW. No, big deal because you got 3.0 loaded with CW. You boot to recovery CW and then run the update from your SDCard that you built in your kitchen.
This isn't really that hard to do if you're willing to read some documentation.
I have no idea if it wipes it clean totally. It does walk you through the setup again (like it was new out of the box) so I would assume most things would be wiped. I would back it up and not take the chance because it is best to be backed up.
Just a note here. It says fully stock execpt root? i don't think that's entirely accurate. I believe that it's still downgrading the bootloader, otherwise you'd never be able to get CWM to run, as itsmagic doesn't work with the new bootloader. So your left with stock 3.2 ROM with adb/su abilities and pre 3.2 bootloader.
On another note, I believe step 17 is not needed. CWM run's itsmagic automatically on every boot. So just booting CWM and then rebooting to android should suffice.
Hey everyone - I figured this might help some folks. It is a CWM installable zip that will restore your system to a completely stock UEKHA (the US retail build for P7310). This includes the stock kernel and recovery image as well.
Heres the instructions:
1) Download this file: http://www.multiupload.com/1KRF1M4CQZ
2) Put the file on your internal storage.
3) Reboot into recovery
4) Execute the Wipe Data/Factory Reset option
5) Choose Install Zip from SD Card
6) Choose Choose Zip from SD Card
7) Select the P7310UEKHA_Restock_v1.zip
8) Sit back, wait about 5 minutes
9) Once the script completes and says "Done", reboot.
10) Welcome to a completely stock US Retail tab
Enjoy.
I just want to ask: Can we flash this on other 8.9s from other regions (namely, an Asian model)?
I'm used to how it is in Maemo where the only differences between firmwares is localization and some preinstalled programs.
Yes you could flash it onto another 8.9 as well, although it should be a P7310 (Wifi only). Just like Maemo, the only differences between regions are localizations and pre-installed apps.
This stock image would not support 3G functionality however, so it would be a bad idea to install it on a P7300.
That's great. Going to flash Clockwork and this once I pick up my P7310 on Tuesday.
Which reminds me - how are Samsung kernels built? I heard that they need to use an initrd (or can the modules be compiled straight into the kernel? or is there a kernel size limitation, which is why an initrd is needed?)
I am truly grateful for this as I rooted and debloated my Tab the very first day lol. This is a great step!
Just flashed my tab with the ROM, works great! Originally had asian ROM on the tab.
Thank you very much! I needed some of the stock original loadable modules after some prior tweaks .
Thanks for the good work!
I was checking the system script used, and I was wondering if this CWM preserve the file/folder permissions as out of the box state or is just 7777 state?
mramirezusa said:
Thanks for the good work!
I was checking the system script used, and I was wondering if this CWM preserve the file/folder permissions as out of the box state or is just 7777 state?
Click to expand...
Click to collapse
Permissions should be out of the box state...the system image was taken from my stock tab directly, and the extract script should leave all permissions in tact.
Hey alterbridge86, it's great to hear you have a GT 8.9 now, that's good news for us
Quick question, how did you dump the ROM and the recovery? I have a GT 8.9 3G from Orange France and I'd like to dump everything before installing CWM to be able to restore to stock if needed.
Thanks! And again, great work!
masterludo said:
Hey alterbridge86, it's great to hear you have a GT 8.9 now, that's good news for us
Quick question, how did you dump the ROM and the recovery? I have a GT 8.9 3G from Orange France and I'd like to dump everything before installing CWM to be able to restore to stock if needed.
Thanks! And again, great work!
Click to expand...
Click to collapse
I ended up dumping it using the CWM I posted in the other thread. The new clockworkmod stores its backups in .tar format, so it makes it really easy to manipulate. Simply create a backup, then if you're feeling adventurous, you can take this flashable zip, replace system.tar and boot.img with the ones created by your backup. The stock recovery is same on all devices, so you can leave the one that is in this package and itwill work for you
Sounds good, thanks I'll give it a try when I have a little more time to play
Hey guys, i did something really stupid today to my 8.9 p7310...I installed that Asia update to it and it placed the tab into a loop and crashes in the settings app when it first starts up. Cant access SD card to install this firmware. I need the Odin firmware to put back to stock I think. Any ideas?
shatty said:
Hey guys, i did something really stupid today to my 8.9 p7310...I installed that Asia update to it and it placed the tab into a loop and crashes in the settings app when it first starts up. Cant access SD card to install this firmware. I need the Odin firmware to put back to stock I think. Any ideas?
Click to expand...
Click to collapse
When you installed the Asian firmware at ODIN, did you remember putting the CSC, PIT, BOOTLOADER to their corresponding places along with the biggest file being at PDA? If you just used the PDA file and not the other files...there's your issue. Once you successfully ODIN, flash this specific CWM Recovery and then you can either choose Stock (this thread) or the Overcome ROM.
Yea just did the pda. The instructions only said the pda. Doesnt matter anyway i am back to stock used adb to load the stock zip to sdcard and loaded
shatty said:
Yea just did the pda. The instructions only said the pda. Doesnt matter anyway i am back to stock used adb to load the stock zip to sdcard and loaded
Click to expand...
Click to collapse
Good to know you made it. The same happened to another user. Those instructions aren't correct.
Sent from my GT-P7310
Help getting China based GT-7310 to US stock
Hello,
I recently bought a GT-7310 in China, and want to get this to stock US using your method. I had a question on step #2.
2) Put the file on your internal storage.
How do I get the file to the internal storage and where is that location? I don't see an /SDCARD folder anywhere when browsing the tab in Windows 7. I have the latest USB drivers installed. I tried to push the file to /SDCARD using ADB but Android SDK tools doesn't recognize my tab. Are there any other ways to get the file to internal storage?
Thanks.
zinzino said:
Hello,
I recently bought a GT-7310 in China, and want to get this to stock US using your method. I had a question on step #2.
2) Put the file on your internal storage.
How do I get the file to the internal storage and where is that location? I don't see an /SDCARD folder anywhere when browsing the tab in Windows 7. I have the latest USB drivers installed. I tried to push the file to /SDCARD using ADB but Android SDK tools doesn't recognize my tab. Are there any other ways to get the file to internal storage?
Thanks.
Click to expand...
Click to collapse
When you plug in the tab, it connects via MTP to Windows. Then you can only get to the internal storage, just drop it in there. You'll see all the default folders (music, videos, etc.) so you'll know your in the right place.
Thank you. I got the file to SD Card, went into recovery, executed the wipe data/factory reset option. After the wipe data/factory reset is complete, I selected the option "apply update from /sdcard". I selected that and I get the following error:
E:error opening /data/media: No such file or directory
Any ideas?
Thanks.
You need to use CWM recovery, not the stock recovery.
So I was randomly flying around on Google today, and I noticed that someone had claimed to root the Kobo Arc, and gave written instructions here -- http : // www . mobileread . com / forums / showthread.php?p=2584491 (Remove the spaces, XDA won't let me post an actual link, since I don't have 10 posts yet). After running through this myself, I went on the Google Play store and used root checker. Much to my surprise, it worked, and my device now has root access. I even tested with Root Explorer, and mounted the system partition as R/W, and I can move things in and out of it. I'm currently working on trying to get a custom ROM working, but I'm worried that I will cause a brick, since Cyanogen doesn't support the Arc. (yet...)
ThunderBird2678 said:
So I was randomly flying around on Google today, and I noticed that someone had claimed to root the Kobo Arc, and gave written instructions here -- http : // www . mobileread . com / forums / showthread.php?p=2584491 (Remove the spaces, XDA won't let me post an actual link, since I don't have 10 posts yet). After running through this myself, I went on the Google Play store and used root checker. Much to my surprise, it worked, and my device now has root access. I even tested with Root Explorer, and mounted the system partition as R/W, and I can move things in and out of it. I'm currently working on trying to get a custom ROM working, but I'm worried that I will cause a brick, since Cyanogen doesn't support the Arc. (yet...)
Click to expand...
Click to collapse
confirmed, was just going to post this but was beaten to it.
http://www.mobileread.com/forums/showthread.php?t=218928
ive attached the file but please go to that website and pay homage to whoever did this work...now to the next stop, a ROM
Device now has a working custom recovery see post 15
Sent from my Arc using xda app-developers app
dazza9075 said:
confirmed, was just going to post this but was beaten to it.
http://www.mobileread.com/forums/showthread.php?t=218928
In terms of a ROM do we not need a compatible boot loader that will allow unsigned ROMs?
ive attached the file but please go to that website and pay homage to whoever did this work...now to find a man about a ROM
Sent from my Arc using xda app-developers app
Click to expand...
Click to collapse
i have absolutely no idea what im doing but I think I have dumped 12 partitions using
dd if=/dev/block/mmcblk0p10 of=/sdcard/p10.img
is there anyone around that fancies a challenge? im in a position where bricking this thing isn't really much of a problem so if someones up for a challenge and wants to help im willing to lend myself and the device to this
Warning : Block of Text Ahead.
dazza9075 said:
confirmed, was just going to post this but was beaten to it.
In terms of a ROM do we not need a compatible boot loader that will allow unsigned ROMs?
ive attached the file but please go to that website and pay homage to whoever did this work...now to find a man about a ROM
Sent from my Arc using xda app-developers app
Click to expand...
Click to collapse
Haha. As soon as I found a thread called "root the Kobo Arc" on Google, I posted it here right away. Sorry if I deprived you of the satisfaction! *troll*
Joking aside, I'm not too sure about the bootloader. I think it's pretty locked down (since I put a nexus 7's cyanogenmod onto the data partition and rebooted. It tried to updated, but said validation failed, or something of that sort). I can't install any custom recoveries either, since I have no idea how to do it in the first place, and there's none made for the Arc.
Also, I analyzed the Arc with the "Droid Examiner" App from the play store (That is a really great app, just so you know), and found that it uses a board called "zeus". The funny thing, though, is that one of Sony's Xperia phones, also has a board called "Zeus", and there's Cyanogenmod for that (albiet not the latest version). However, these two devices have nothing in common. The closest thing to an Arc that has Cyanogenmod is the Nook HD/HD+, which uses the exact same chip (OMAP TI 4470).
If someone is smart enough (not me) to analyze the Cyanogenmod files for the Nook, and see how they work, that may lead into flashing the Arc.
Anyway, I'm resetting the Arc, since I'm having weird cases where the Arc would freeze after booting it from sleep mode, and I'd have to turn it off and on again. I think that was something else I did, since it happened before the root, but neh, I might as well try this all from factory default settings.
Sorry for the block of text, guys!
P.S. Using the stock Jelly Bean boot animation on the Arc looks amazing!:laugh:
Haha, its cool, like yourself I just happened to Google kobo arc root and for once my googe fu was up to the task and the root appeared
I've been looking at starting my own recovery mod branch but its no simple task by the looks of it, if their are similar devices we can use all their data and tweak it to ours which would help a lot!
Oh I think we have fast boot, I held vol down and pushed power on, it just sat at the kobo arc screen, I used the nexus 7 driver from the universal adb/fastboot driver I found on here and it connected up http://forum.xda-developers.com/showthread.php?t=2263822
I stumbled on some to good to be true program on Xda dev that apparently can root anything and unlock any bootloader once your in fastboot mode. I have tried that part and it said it was successful but i have no idea how to test this out yet, the program does a bunch of other stuff too, the adb stuff worked as did apk sending, and the rooting options knew i was rooted, it also has flashing functions, I'll be damed if I can find it now I'm at home though , I'll have another look.
I don't mind doing leg work but if someone can read the map it would be very helpful!
Edit, found it
http://forum.xda-developers.com/showthread.php?t=2399385
http://www.mediafire.com/?vwxpq62pa927s9c
Sent from my Arc using xda app-developers app
dazza9075 said:
Haha, its cool, like yourself I just happened to Google kobo arc root and for once my googe fu was up to the task and the root appeared
I've been looking at starting my own recovery mod branch but its no simple task by the looks of it, if their are similar devices we can use all their data and tweak it to ours which would help a lot!
Oh I think we have fast boot, I held vol down and pushed power on, it just sat at the kobo arc screen, I used the nexus 7 driver from the universal adb/fastboot driver I found on here and it connected up http://forum.xda-developers.com/showthread.php?t=2263822
I stumbled on some to good to be true program on Xda dev that apparently can root anything and unlock any bootloader once your in fastboot mode. I have tried that part and it said it was successful but i have no idea how to test this out yet, the program does a bunch of other stuff too, the adb stuff worked as did apk sending, and the rooting options knew i was rooted, it also has flashing functions, I'll be damed if I can find it now I'm at home though , I'll have another look.
I don't mind doing leg work but if someone can read the map it would be very helpful!
Edit, found it
http://forum.xda-developers.com/showthread.php?t=2399385
http://www.mediafire.com/?vwxpq62pa927s9c
Sent from my Arc using xda app-developers app
Click to expand...
Click to collapse
Um... Okay. I've installed the drivers (I think I installed them correctly), and I booted my device using "volume down + power". I have it connected to my System, but whenever I try to use one of the options in the Android Root Toolkit, it tells me it's waiting for the device. I don't know what I did wrong, but something's clearly not working.
As far as the recovery goes, I think that looking at the Nook Tablet from TWRP would work quite nicely. It runs on a similar processor ( I believe it's a OMAP TI 4430 ), and it seems to be quite similar in specs to the Arc. If only I was a bit better at programming...
ThunderBird2678 said:
Um... Okay. I've installed the drivers (I think I installed them correctly), and I booted my device using "volume down + power". I have it connected to my System, but whenever I try to use one of the options in the Android Root Toolkit, it tells me it's waiting for the device. I don't know what I did wrong, but something's clearly not working.
As far as the recovery goes, I think that looking at the Nook Tablet from TWRP would work quite nicely. It runs on a similar processor ( I believe it's a OMAP TI 4430 ), and it seems to be quite similar in specs to the Arc. If only I was a bit better at programming...
Click to expand...
Click to collapse
im usig the generic android adb driver and the bootloader driver for fast boot
im dumped all partitions and mapped them all out, see below for file system details
But again I'm blindly stabbing in the dark and most tutorials are a bit lacking in depth or not relevant to the kobo :/
Sent from my Arc using xda app-developers app
127|[email protected]:/ # blkid
/dev/block/dm-2: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/dm-1: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/dm-0: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/mmcblk0p12: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/mmcblk0p11: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/mmcblk0p10: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/mmcblk0p4: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
[email protected]:/ #
Okay, so I can't even push apps to the Arc using ADB. I think you have to boot into recovery (power + volume up). I don't know how to use the terminal at all (I'm lost, I know D: ), so I don't have that installed on the Arc. I remember being able to do ADB even with my Sony Reader (First gen, PRST1), so I'm not sure why the Arc isn't quite working. I have both drivers installed, BTW.
As for the recovery, I can't even find a method to flash it. I'm still trying everything I can, though. :\
Sent from my Arc using xda app-developers app
ive mapped out the following partitions and any info ive found about each of them, im not in a position to help at the moment, got a big day at work tomorrow, as mentioned above ive used several tools,
SuperSU,
ROM toolbox pro
busybox
remount
Below is a list of all the available partition names and numbers
/dev/block/mmcblk0p1 xloader
/dev/block/platform/omap/omap_hsmmc.1/by-name/xloader
348KB
/dev/block/mmcblk0p2 bootloader
/dev/block/platform/omap/omap_hsmmc.1/by-name/bootloader
1.50MB
/dev/block/mmcblk0p3 cypto
/dev/block/platform/omap/omap_hsmmc.1/by-name/crypto
Completely empty
64KB partition size
/dev/block/mmcblk0p4 EFS
Mounted as /FACTORY
/dev/block/mmcblk0p4:UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/platform/omap/omap_hsmmc.1/by-name/efs /factory ext4 ro,relatime,barrier=1,data=ordered 0 0
20MB
/dev/block/mmcblk0p5 misc
/dev/block/platform/omap/omap_hsmmc.1/by-name/misc
Completely empty
128KB partition size
/dev/block/mmcblk0p6 Bootlogo
/dev/block/platform/omap/omap_hsmmc.1/by-name/bootlogo
Contains kobo arc picture
4MB partition size
/dev/block/mmcblk0p7 Logos
/dev/block/platform/omap/omap_hsmmc.1/by-name/logos
contains the battery charge logo
28MB partition size
/dev/block/mmcblk0p8 recovery
/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
data contains a GZ file, when decompressed we get a 8.5MB file of unknown type, exact same as in boot
5MB of data
16MB partition size
/dev/block/mmcblk0p9 boot
/dev/block/platform/omap/omap_hsmmc.1/by-name/boot
data contains a GZ file, when decompressed we get a 8.5MB file of unknown type, exact same as n recovery
4.5MB of data
8MB partition size
/dev/block/mmcblk0p10 CACHE
Mounted as /CACHE
/dev/block/mmcblk0p10: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/platform/omap/omap_hsmmc.1/by-name/cache /cache ext4
rw,nosuid,nodev,noatime,errors=panic,barrier=1,nom blk_io_submit,data=ordered 0
0
768MB partition size
/dev/block/mmcblk0p11 SYSTEM
Mounted as /SYSTEM
/dev/block/mmcblk0p11: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/platform/omap/omap_hsmmc.1/by-name/system /system ext4
rw,relatime,barrier=1,data=ordered 0 0
910MB partition size
/dev/block/mmcblk0p12 USERDATA
Mounted as /DATA
/dev/block/mmcblk0p12: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4"
/dev/block/platform/omap/omap_hsmmc.1/by-name/userdata /data ext4
rw,nosuid,nodev,noatime,errors=panic,barrier=1,nom blk_io_submit,data=ordered 0
0
12GB partition size
Watching with interest. The root works. No frills CPU installed and working. There may be hope for this thing yet:good:
Moved to new thread and more appropriate forum - keep up the good work guys
im not sure that's going to work you know, ive had some permission errors with adb which suggests the root isn't full, terminal on the device works fine, but adb just has some problems, adb shell and the su seems to fix them.
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
http://www.addictivetips.com/android/make-nandroid-backups-on-android-without-booting-into-recovery/
im busy today but ive found these useful
i think Clockwork Recovery should be our focus at this point or if you have dumped your partitions(?) attempt to construct a rom for later use
or this should work too
Install any Custom Recovery with flash_image:
Just like the previous method, this method also requires following advanced steps and is not recommended if the first method is working for you. flash_image is a tool for Android devices that lets you rewrite your phone’s system partitions with partition image files and installing it to your device requires ADB. If you don’t already have ADB installed, check out our guide on installing ADB. Once you have ADB installed, flash the custom recovery image as follows:
WARNING: It is very important that the recovery image that you use in this method is compatible with your device. Else it will not work and flashing it could possibly brick your device.
Download flash_image and extract it from the zip file to a location on your computer. We extracted it to the main C drive (not in any folder) and will use that in the next steps.
Copy the recovery image for your phone to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
Enable USB debugging mode on your device from Menu > Settings > Applications > Development.
Connect your device to your computer via USB.
Open a Command Prompt window on your computer and enter the following commands: adb push c:\flash_image /sdcard/adb push c:\recovery.img /sdcard/adb shellsumount -o remount, rw /systemcp /sdcard/flash_image /system/bincd /system/binchmod 777 flash_imageflash_image recovery /sdcard/recovery.imgThis will first transfer flash_image and recovery.img to your phone. Then it will copy flash_image to the /system/bin folder of your Android device and make it executable. Finally, it will flash the custom recovery image to your device using flash_image.
Note that we used c:\flash_image and c:\recovery.img in the first two lines as we had these files extracted at the root of our C drive. If you extracted the files elsewhere, use the appropriate paths and if your recovery image has a different name, use the appropriate name.
Reboot your device once the process is finished and you’re done. You may exit adb and the Command Prompt window on your computer by entering ‘exit’ thrice.
dazza9075 said:
im not sure that's going to work you know, ive had some permission errors with adb which suggests the root isn't full, terminal on the device works fine, but adb just has some problems, adb shell and the su seems to fix them.
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
http://www.addictivetips.com/android/make-nandroid-backups-on-android-without-booting-into-recovery/
im busy today but ive found these useful
i think Clockwork Recovery should be our focus at this point or if you have dumped your partitions(?) attempt to construct a rom for later use
or this should work too
Install any Custom Recovery with flash_image:
Just like the previous method, this method also requires following advanced steps and is not recommended if the first method is working for you. flash_image is a tool for Android devices that lets you rewrite your phone’s system partitions with partition image files and installing it to your device requires ADB. If you don’t already have ADB installed, check out our guide on installing ADB. Once you have ADB installed, flash the custom recovery image as follows:
WARNING: It is very important that the recovery image that you use in this method is compatible with your device. Else it will not work and flashing it could possibly brick your device.
Download flash_image and extract it from the zip file to a location on your computer. We extracted it to the main C drive (not in any folder) and will use that in the next steps.
Copy the recovery image for your phone to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
Enable USB debugging mode on your device from Menu > Settings > Applications > Development.
Connect your device to your computer via USB.
Open a Command Prompt window on your computer and enter the following commands: adb push c:\flash_image /sdcard/adb push c:\recovery.img /sdcard/adb shellsumount -o remount, rw /systemcp /sdcard/flash_image /system/bincd /system/binchmod 777 flash_imageflash_image recovery /sdcard/recovery.imgThis will first transfer flash_image and recovery.img to your phone. Then it will copy flash_image to the /system/bin folder of your Android device and make it executable. Finally, it will flash the custom recovery image to your device using flash_image.
Note that we used c:\flash_image and c:\recovery.img in the first two lines as we had these files extracted at the root of our C drive. If you extracted the files elsewhere, use the appropriate paths and if your recovery image has a different name, use the appropriate name.
Reboot your device once the process is finished and you’re done. You may exit adb and the Command Prompt window on your computer by entering ‘exit’ thrice.
Click to expand...
Click to collapse
I've already tried that recovery method (I spent about two hours just googling), and it doesn't work with the Arc. The ADB won't let me push the image over.
As for Cyanogenmod, I tried something yesterday. A person on the Mobileread forums (apparently a Kobo employee) put out an update.zip file for the Kobo Arc. The file was quite old, and it's really just the 4.1.1 update that (I hope) we're all running. He said that as long as you put it on the root of the data partition, the Arc will flash it immediately. When I tried taking a Nexus 7's Cyanogenmod file and sticking it in the same place, the Arc started flashing it, but then just said there was an error with the update. So I personally think that you do require a properly signed ROM.
However, if you open up Kobo's update.zip using Winrar, a sidebar pops up that says "signed by SignApk". I don't know too much about this, but couldn't we use this "signapk" to sign our own ROMS and flash them?
Just a thought.
ThunderBird2678 said:
As for Cyanogenmod, I tried something yesterday. A person on the Mobileread forums (apparently a Kobo employee) put out an update.zip file for the Kobo Arc. The file was quite old, and it's really just the 4.1.1 update that (I hope) we're all running. He said that as long as you put it on the root of the data partition, the Arc will flash it immediately. When I tried taking a Nexus 7's Cyanogenmod file and sticking it in the same place, the Arc started flashing it, but then just said there was an error with the update. So I personally think that you do require a properly signed ROM.
However, if you open up Kobo's update.zip using Winrar, a sidebar pops up that says "signed by SignApk". I don't know too much about this, but couldn't we use this "signapk" to sign our own ROMS and flash them?
Just a thought.
Click to expand...
Click to collapse
I think there is a problem with the setup, I just flashed a CW recovery image and it worked, or didn't rather! but the concept did, transferred, flashed using adb, I had to replace it though as it was totally borked and kept restarting, apparently the touch based recovery methods can be like that, ill have some good time tomorrow night (UK time) if your about, and ill keep at it tonight if I get a chance!
copy recovery to adb location
adb push recovery.img /sdcard/
adb shell
su
cat /sdcard/recovery.img > /dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
exit adb shell and type
adb reboot recovery
fixed it by holding power button and vol down to boot to fastboot recovery
then ran
fastboot flash recovery inputrecovery.img
inputrecovery being my original recovery file taken from partition 8!
ive updated the partition map on the post above with my progress, but it looks like we can flash to them my name so its probably less relevant now
oh ive ditched the drivers I was using and reinstalled the drivers from the official SDK, generic android adb for within android and android bootloader for fastboot
EDIT
Yaaas!! recovery replaced
ok, deleting or renaming /etc/install-recover.sh appears to have stopped custom recovery being changed back to stock after reboot, I used the recovery builder to make a build from partition 8, which it did without error, flashed using the above commands.
Still don't know what im doing though, but progress is progress
ill post a link to the custom recovery ive made soon, we need to make up some fstab file listing all the mounts etc, i tried one but it must be borked as recovery couldnt see anything
ok i have a working recovery http://jenkins.cyanogenmod.com/job/recovery/35325/artifact/
its not quite done, i need to mount the sdcard, its physical location is mounted, ie /data, but its virtual mount isn't /storage/sdcard
I have asked for some help so hopefully someone can help be on this, I think it needs to be symlinked
im going to need some help soon, so if your reading this with a kobo arc, I need you! im needing a hand folks! if your stuck getting this far let me know and we can PM to get it working
oh and recovery is also now persistant by deleting or renaming /etc/install-recover.sh"
Sorted folks!
I have made a stable and thus far, a working custom recovery.
its mounting everything and backing up / restoring works as it should, unless anyone can find any issues I consider this step in building a complete ROM completed,
you must have root, download arctic.apk and install on your tablet, you will need to enable unknown sources In dev options first
you must have android and java sdk also installed, you will need to add the google usb drivers in the android sdk, you will find them in the "extras"
Enable usb debug on the arc and install the generic google adb usb drivers
Delete or rename /etc/install-recover.sh this will make the custom recovery persistent
Copy the recovery.img to the SDCard, either by using drag and drop in windows ( to root of "internal storage") or by adb push, if you use adb push then remember to copy recovery.img to the same folder as adb
adb push recovery.img /sdcard/
The next job is to open up a command window and navigate to adb folder, type the following exactly, even better copy and paste them!
adb shell
su
cat /sdcard/recovery.img > /dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
exit adb shell (ctrl+C) and type
adb reboot recovery
and bobs your uncle, one happy new recovery
Thanks for your hard work. Everything works quite well.
Sent from my Arc using Tapatalk 4
cancuck said:
Thanks for your hard work. Everything works quite well.
Sent from my Arc using Tapatalk 4
Click to expand...
Click to collapse
that's the easy bit, I have a feeling I need to make a couple of changes to the recovery.img but noting major, just a couple of other mounts I may have missed
I probably would like some help with the next bit however.
im just trying to build a development platform, I have a loathing for Linux as a desktop so will need to re educate myself without throwing my laptop out of the window, after that "challenge" the ROM should be easy
Well, I've just done it, and it works. Everything seems to be in order for the time being. I'm going to muck around with the new capabilities, and see what I can do.