Database Users

Need help.. Bootloader Err:A5,70,70,00,1F

I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.

it works!! Thank you so much!!

anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.

THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!

Thank you sooooooo much!!!! I thought all hope was lost.

Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1

This worked to fix my phone, thx so much
i used the 2.3.20 SBF

will this work on the droid x?

myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps

Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App

Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again

Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App

Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results

well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.

Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.

I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.

[HELP] Milestone 2 bricked (SBF Not Working, No Recovery, No Battery Charge)

Hey i will try to be as precise as possible. I'm posting in this section because in the general section the help isn't as effective as here.
Here is my problem:
A few days ago i flashed GB MIUI on my Milestone 2 everything worked perfectly and i used the phone a whole day. That night i've put the phone to charge and went to bed. Il the morning when i push the power button the phone didn't boot. I was stuck at the first M bootscreen (Red at the time).
I wasn't able to do anything no recovery the phone didn't seem to be charging so i decided to flash Stock FR SBF (One i used many times)
Once completed i let the phone tying to Boot for about one hour. After that i pulled the battery out and tried to get to recovery but no success. Holding the X button while booting wasn't getting me to recovery because the wouldn't get pass the First Moto bootscreen (Recovery open after that).
So i've flashed since then a handful of SBF from and-developpers:
2.2 FR
2.2 CH
2.2 UK
2.2.2 FR
2.2.2 CH
2.2.2 UK
2.2.2 Hong Kong
2.2 China
Official GB Leak signed
Still wasn't able to get throught the first moto bootscreen.
r2beta0 had an idea so if someone can please help me get through this. I think i'm done with flashing things...
r2beta0 said:
Hmm, I just had an idea that needs elaboration. As we know we can flash any partition of the phone using sbf_flash or RSD Lite. If his problem really can be solved doing a data wipe it would be also solved by flashing a new "empty" CG37.smg. It doesn't need to be signed because /data is not checked by bootloader. So, we need a Milestone2 /data empty image (CG37.smg). One could do a data wipe and take the image of with dd command, but it would be a HUGE file (6,5 GB). I don't know if we can use a smaller file just to clean his /data. Maybe someone can elaborate that.
Click to expand...
Click to collapse
dangpzanco said:
Maybe you can flash a modded SBF, with a modded CG37 and a new CG that points to addresses from the middle of data to its end, and make two partitions with data spare space for the dual booting project, is that even possible?
Well, at least when you pack and zip it the SBF won't be hard to upload.
PS: Does the Milestone 1 full SBFs have the data CG included?
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I tried holding X button while i plug the phone the Wall charger but no sucess either. I just can't get to the screen with the Exclamation point...
I've tried to be as precise as possible to help people who will or already tried to help me. Please don't delete my thread or move it after i've put so much effort in this...
I've search in hundreads of threads around different forum XDA is my last chance...
I thanks everyone who will take some time to help me or even at least read this.

I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here

r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I just did it no results still the same!
I don't think it looks good.
I didn't pull out the battery yet i wan't to give it a chance. I'll edit this post

Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.

Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)

r2beta0 said:
Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.
Click to expand...
Click to collapse
Emacore said:
Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)
Click to expand...
Click to collapse
I removed the sim card removed the sdcard, charge the battery with a milestone 1 avec two different charger. No results
@r2beta0 i think you are right i'll wait i someone help me until tomorrow evening if not i'll send it back to moto.

Have you tried to use sbf_flash on linux/mac?
Sent from my Milestone 2 XDA App

I think i'm going to try that. Will report later

r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I have the same probleme .... And this don't work for me too.....

Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !

EVEALEX62 said:
I have the same probleme .... And this don't work for me too.....
Click to expand...
Click to collapse
I've tried Linux but no result... We are 3 french who have the exact same probleme it can't be Hardware?
Our Milestone 2 are somewhat different than others... I've phoned motorola for my problem today they told me to send it to a partner repair center but he warned me that if they discover i did something to the phone it will cost my a lot of money...
I'm sending it monday morning i'm really hoping for a solution before than...

Im not sure about service sbf vs the one that wipes user data. We have that kind of sbf for m2?
On the other side, looks like ROM chip go bad.

I'll ask some obvious question...you did not have any errors when flashing ? it always complete the process? Can you get into the bootloader when it print version 70.12 or 70.13 ?
Another obvious thing, did you verify md5 after downloading sbf ?

pat972 said:
Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !
Click to expand...
Click to collapse
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................

EVEALEX62 said:
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................
Click to expand...
Click to collapse
So it happenned both to us when we intalled MIUI so the problem is MIUI. Because i was using CM7 since Endless7 post the instruction avec Defy's ROM. And the phone was perfect...
We both have French Milestone 2 and i don't think it is my fault. I quite shure i did everything straight. I maybe a noob in dev or other things. But I have experience in flashing things...
My bootloader is 70.12 so it's different than Alex. And i used just like Alex the French Stock sbf i used everything i needed a freash clean install
When i flash i get to the "Please reboot phone manually" like everytime and then pull the battery go to bootloader and get finish

I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone

Motodoido said:
I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone
Click to expand...
Click to collapse
My phone is supposed to have the 70.12 bootloader right? If i flash the new one won't the repair center see that i modified the software?
The is no 70.12 bootloader on and-developper so how do i get back?
My phone doesn't not get to PASS it never did even in past... Except when i could do a wipe data and cache before flash

If you flash the 70.13 you do not be able to back to 70.12, so think before. When RSD is in reboot your phone 30%, I always remove my phone and never have problems
If you want try, here is the 70.13

The bootloader for the sbf 2.2.2 is 70.13 ! I remenber well, i did the official update on a windows pc, and it started by updating bootloader! But it's good news and may be just some sort of sbf incompatibility with the bootloader...just find the correct ones?
Sent from my MotoA953 using XDA App

pat972 said:
But it's good news
Click to expand...
Click to collapse
What is the good news ????

[Q] Defy MB525 UK

Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!

Hiya, can u tell us how u updated the firmware to 2.2...
Sent from my MB525 using XDA

Hi i think i installed it through the motorola software/update?? when i plugged in the usb & phone it installed the motorola drivers then said there is an update for the phone

saffa1 said:
Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Click to expand...
Click to collapse
Bad update, flash a froyo sbf from here: http://forum.xda-developers.com/showthread.php?t=966537
I recommend you stay on froyo so you can install CM7 too
If this doesn't fix it (make sure its right sbf for your type of defy) Then its probably a radio fault that needs repair, but as it worked before it should be fine, its just a bad update, hope this helps
Sent from the real world by hacking into the matrix

thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff

saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
That's strange I never got any Spanish instructions :O try the latest version from the thread I provided, and read this noob guide http://forum.xda-developers.com/showthread.php?t=1216982 Thanks to these two threads I did what I thought was impossible, flashed froyo and then CM7 on the same day, its not as hard as it seems just follow steps carefully and its easy! Any more questions feel free to ask, you don't need to send your phone learn it yourself its worth it
Sent from the real world by hacking into the matrix

Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )

saffa1 said:
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
Click to expand...
Click to collapse
Can you explain this in detail so I can try and help you?
Sent from the real world by hacking into the matrix

Questions go in the Q&A section

saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
So, your phone is simlocked and when you flashed a different SBF, you have deleted the files that have (probably) previously been installed to unlock it. There are some custom ROM's out there that can simunlock Defy (one of them is MS2Ginger4.0). If you don't know what you're doing and can not handle it yourself, I could flash a custom, simunlocking ROM for you if you don't mind shipping it to Bulgaria and back (I assume you are in the UK).
P.S. There is also a chance that your sim card slot is busted and it can't read the SIM card.

am from uk i can explain or help u over the phone

ibtihaaz said:
am from uk i can explain or help u over the phone
Click to expand...
Click to collapse
I'm not good over the phone, plus my mic is a bit screwed, I'll try write a simple noob guide one day I'm free
Sent from the real world by hacking into the matrix

Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz

If you flashed a froyo SBF last, you must flash at this time also a froyo SBF.
The Flash of an eclair SBF will end in a black screen, cause froyo SBF are CG4 (Bootloader 4) and eclair SBF are CG3 (Bootloader 3).
The Bootloader must be equal or higher then the last SBF you flashed.
Try this SBF:
http://sbf.droid-developers.org/umt...RYOTMGB_P023_A011_M003_HWp3_Service1FF.sbf.gz
its the tmobile froyo SBF Britain.

saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
You WHAT!? Are you sure it didn't just go flat after flashing? My defy can be quite stubborn to boot if it goes dead, general rule is if rsdlite can still recognise it flashing it again should sort it out
Sent from the real world by hacking into the matrix

There's a few things you can try here, don't bin it its almost impossible to brick a defy completely: http://forum.xda-developers.com/showthread.php?t=978140
Sent from the real world by hacking into the matrix

All i have is a black screen with white led and that's only if i plug it in the usb

saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance

This guy is the best, listen to him he helped me improve my mic problem
Sent from the real world by hacking into the matrix

Auris 1.6 vvt-i said:
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
Click to expand...
Click to collapse
Hi i cant get it into boot-loader i have tried but its just dead
i can get teamviewer but i dont have a web cam

[Q] Looking for a working SBF

Hi folks
I've bricked my Defy and trying to get it back on line with RSD lite (5.6). I've tried the following SBF from sbf.droid-developers.org/umts_jordan however it seems to be corrupt as RSD complains about not enough disk spare which is not true. When I open the gz file winzip cannot determine the file size.
JRDNEM_U3_3.4.2_145-012_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B5TEL03B.0R_PDS03C_USAJRDNFRYOTELSTRA_P013_A007_M003_HWp3_Service1FF.sbf.gz
I downloaded an earlier version and RSD can work with it fine but as it's old than my current BL it doesn't run and just get the usual black screen.
Does anyone know where I can get a "Good" version of this (or a later one) please.

Okay I've moved on and managed to upload a Telstra 3.4.2 SBF by shorting the file name.
My next problem is that the device is in a boot loop. If I try to power on with sound - I get the little andriod logo with an exclamation mark so it doesn't go into a recovery menu.
Once again, anyone know how to get throught this?
Cheers

tastech said:
Okay I've moved on and managed to upload a Telstra 3.4.2 SBF by shorting the file name.
My next problem is that the device is in a boot loop. If I try to power on with sound - I get the little andriod logo with an exclamation mark so it doesn't go into a recovery menu.
Once again, anyone know how to get throught this?
Cheers
Click to expand...
Click to collapse
Its all about flashing the correct SBF....but first tell me do you want to run the stock ROM or are you planning to run a custom one..
Anyway...may be this will help you....
http://forum.xda-developers.com/showthread.php?t=1825064
If it does not...then let me know further problems you are facing...
Thanks

Thanks for your replay. Yes it is all up to the correct sbf but neither the Telstra ones worked.
I did however have CM7/2ndInit installed before and reading around that was the problem when trying to get the phone back stock. You learn as you go I guess.
Finally got it up and running using forum.xda-developers.com/showthread.php?t=1152377
Question is from this can I get back to CM7 etc from here?

Yep I can! All up and running again with CM7.
Thanks

mb525 Help with ERR:a5,69,35,00,27

Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!

pikaetas said:
Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!
Click to expand...
Click to collapse
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.

Zeroemd said:
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.
Click to expand...
Click to collapse
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?

pikaetas said:
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?
Click to expand...
Click to collapse
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.

Zeroemd said:
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.
Click to expand...
Click to collapse
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.

pikaetas said:
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.
Click to expand...
Click to collapse
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot

pikaetas said:
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot
Click to expand...
Click to collapse
Well I am Glad your phone is alive !
anything you need PM me :good: