Gt-i9100g touch screen driver issue and overheat problem fixed. - Galaxy S II General

Iam using omni ROM 4.4.2 .Everyone know that some of the gt-i9100g users got touch screen driver issue.And this problem fixed by hendavi.But installing the hendavi kernel heated my phone.But I'm install jozsi kernel in omnirom 4.4.2.Now my phone works properly.only problem after installing the kernel music player sound some time struck at little time.But battery backup is good compare to cyanogenmod.Here is the screenshot.

You either can post this in General section. Why did you create a thread which is development not related
Your thread will be moving soon.

And thread is moved to General.
Folks, if it's not development, or doesn't contain development work, please post your information in the General Forum.
Cheers!
MD

try other ROMS
better try other roms like cm (Aosp based) or Wizzedkat 2.6 (stock based) ..i found much bug with Omni ROms

Related

[Q] CM9 on GGL ROM

Hi,
I am one of those who has ended up with a Defy with green lens. I am not a dev but I stumbled upon this if someone has not already done so.
I have been playing around with MIUI, CM7, GGL and wanted to try CM9 ICS. I followed an already closed thread by adi4motion on this forum, started with stock Froyo but all the time ended up stuck at Moto logo on reboot. While reading the thread to make sure I have not missed out anything but following that thread did not lead me anywhere either on stock Froyo or GB downloaded via thread link but the only thing that got into my mind was GB was flashed after CM9.
So I flashed the latest CM9 Nightly 120617 zip dated 2012-Jun-17 on GGL ROM Android 2.3.6 from this forum and gapps 4.0.3. It has been successful with camera, opera, gps working well. So far no FC. Seems stable so far 2 days of checking various things. While installing Opera wifi needs to be on else installation fails. I do not know where to upload screen shots taken by holding power button.(that works too).
I seek expert opinions.
Your thread Title: Misleading
Your Question: Unknown
Your Thread location: wrong
Please ask the moderator to move it in Q&A thread and be appropriate on ur question. We will definately help u.
Questions go in the Q&A section
brajesh was right that I was not clear in my question. I was looking for changelog for CM9 for defy. I could not really locate one. All I could find was from the now closed thread that specifies a specific GB kernel or a Froyo CM7 kernel and a buggy HWA with Opera not working etc.
My question was supposed to have been whether any GB kernel is good enough for CM9 ICS flash for defy.
I found that flashing CM9 zip over GGL ROM without any kernel update worked OK for Opera to work fine. A buggy HWA was pointed at for Opera not working. As mentioned in that thread Camera Panorama does not work. I did not even expect the defy to bootup full going by the closed thread.
Sorry I did not click the option if mine was a question. I would appreciate if some one could point a thread where I can learn about HWA testing as I do not have enough net time per week basis. Thanks in advance.

Omni for i9505

I found it strange there is no thread for Omni in development forum? There was a thread but abandoned since there was no maintainer for the device. But since then unified builds happened, and i9505 /jfltexx has been mentioned as a device supported by the updater script:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
Is here anyone who uses the ROM as a daily driver, or anyone who has checked it in the last time, to share experience with us? I'm downloading it right now, and will try to find time tomorrow to check it.
The reason is that the thread is under 'Unified' subforum, where also other AOSP ROMs like Octo, Nameless, PA are. Strange CM isn't there too...

[Q&A] [4.4.4] [CM] [09/10] UltimaMod [KTU84P] [i9505/G]

Q&A for [4.4.4] [CM] [09/10] UltimaMod [KTU84P] [i9505/G]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
JohnnyBlack10 said:
Video record stock aosp camera not recording at all! I try snap and the same thing . Full wipe .... can someone check this out?
Click to expand...
Click to collapse
i tried this kernel on miui , cm and samy deluxe on galaxy s4 i9505 , the problem is after 1 - 2 days it makes the phone amazingly fast and i am not exagerating and it reboots it non stop .......
CWM Set_perm some changes failed
Good Afternoon Guys ,
hope someone can help , Trying to install this ROM on an S4 i9505 (JFltexx i believe)
followed the instructions > Wipe Data , Cache , Davlik etc.
Aroma installer runs allows me to pick all the options i want (ive just gone with the defaults for this example)
when it gets to the end it starts the install procedure and then says Set_perm some changed failed. then reboots and then never boots.
something im doing wrong ?
Ive ended up flashing CM11 back onto it , but im having some real bad issues with call quality (mainly people cant hear me or i sound like im in a tunnel)
really want to use this ROM instead but cant get it to install.
Youtube bug !? 720 p dosen t work but 360p is working ( youtube 5.14.11 on wi fi )
Is this rom also work with galaxy s3 shv-e210s? without any prob?
Hey Kryten, since my S3 times I came through the thread to your CM based ROM. Could you provide a screen on Screenshot? General question about the camera, how is the quality compared to GPE?
Sent from my GT-I9505 using XDA Free mobile app
http://forum.xda-developers.com/devdb/project/?id=3324#screenshots
The camera quality is the same as GPE.
CM11 M12
Just noticed its based on CM11 M11... Are you planning updating the cm source to M12 for Ultima before CM12 comes??? (or its just me again not reading and searching that M12 has lots of bugs?)
CM simply haven't updated the vendor information to include the M12 changelog. You can see here: https://github.com/CyanogenMod/android_vendor_cm/blob/cm-11.0/CHANGELOG.mkdn It still uses the M11 changelog. They haven't updated it (probably really busy with CM12).
The codebase was synced and compiled about 7 days ago, so it's very fresh and newer than any M12 ROM.
I won't be releasing a CM12 ROM until there is a milestone release for it. I don't want to deal with buggy ROMs right now.
Apart from that time bug, I haven't had any problems with my ROM. I don't use my S3 at all., I run my S4 daily.
EDIT:
To be honest, I had some stuff planned for features, but I will be holding off now after reading this: http://www.landofdroid.com/2014/cm12-roadmap-leaked-exciting/ As CM won't implement any new features that are submitted. I actually managed to get my call recording codec feature in before then, but only just.

[Q&A] [kernel] cm12 sm-t330nu

Q&A for [kernel] cm12 sm-t330nu
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] cm12 sm-t330nu. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey Moon!
moonbutt74 said:
okay,
this is built through bliss but seems to do
cm12-kernel-carmilla-linaro-milletwifiue-mb74.zip
https://www.androidfilehost.com/?fid=23991606952595027
Flash in recovery after rom flash. Don't screw it up !
NOTE- for lanscape i recommend setting dpi to 160
I will update my source soon. it is located here
https://github.com/moonbutt74/kernel-milletwifi-choad-warrior
I enjoy calling this my caf-maybe kernel xD
Rotation fixed, i am working this kernel source to see if i can get kexec hardboot functionality working
Please do not ask me questions about overclocking.
This is a temporary offering for @sub77 's LP build for the sm-t330nu milletwifiue
[ROM][UNOFFICIAL][LP5.1.1] CyanogenMod 12.1 Galaxy Tab 4 8.0 [20150430][SM-T330]
http://forum.xda-developers.com/tab-4/development/rom-cyanogenmod-12-1-t3097152
This does not resolve the camera issue but does seem to prevent the reboot which occured before.
Please do not ask me questions about overclocking !
thanks :silly:
m
Click to expand...
Click to collapse
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
ThaddNation said:
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
Click to expand...
Click to collapse
T,
I use philz recovery, twrp is consistently a giant bag of bugs and i won't touch it..
https://www.androidfilehost.com/?w=files&flid=23544
don't multiflash , do rom, then kernel, then supersu.
m
M
i have seen you posted some issues with MTP mode. i have that problem too and i am using a mac book
regards
Kernel v4
Hey Moon,
Does the 4th version enable over clocking the tablet? In kernel editor I have the option to push the CPU upwards of 1593MHz and the GPU to 533MHz. ! BTW, any new projects? I've been following you and sub77 on this Rom\Kernel but seems like it is getting quiet. I've been fooling around in the system files to see if I can find a fix for this camera. I got rid of Two files in /system/etc/permissions. And had to edit two that I found which were corrupt compared the the other camera files I've been comparing them to. I'm slowly but sure on to something. Let me know if u want to port a Sweet ROM, or Tweak a kernel out, etc. I'm ready!
Thadd.
T,
hi, if you succeed in solving the camera issue, please do a complete detailed write-up on the fix.
For all versions of kernel 2-4 i applied amyren's OC/UV changes , and set ondemand/cfq as default.
I run that kernel in my cm11 build [personal, not release] and it does well, camera up. the break is on the rom side somewhere. [cm12]
i am currently working the LL kernel realease for the sm-t530nu. The kernel for the sm-t330nu [mine] is done.
The source is posted here, https://github.com/moonbutt74/kernel-milletwifi-choad-warrior-rv01
you are absolutely welcome to and encouraged to take it foward, being a bit of a dumb-dumb that's as far as i could get it. :silly:
m

Resurrection Remix for kernel

I need a kernel for Resurrection Remix 5.8.3, but I can not find the proper kernel and the synergy kernel did not work either
...
I'm also looking for the Kernel following upgrading to the latest version. Any help would be very much appreciated.
Confused which kernel ??
Kernels usually come with the rom or a linked in the roms thread >> found via search thread tab.
Or as a thread in development for individual kernels.
Your post lacks information as this thread relates to sept 2017 not today ,so a guess.
https://forum.xda-developers.com/search/thread/3748689?query=kernel
https://forum.xda-developers.com/search/thread/3615227?query=kernel
Exynos.
https://forum.xda-developers.com/search/thread/3543301?query=kernel
N900v
JJEgan said:
Confused which kernel ??
Kernels usually come with the rom or a linked in the roms thread >> found via search thread tab.
Or as a thread in development for individual kernels.
Your post lacks information as this thread relates to sept 2017 not today ,so a guess.
https://forum.xda-developers.com/search/thread/3748689?query=kernel
https://forum.xda-developers.com/search/thread/3615227?query=kernel
Exynos.
https://forum.xda-developers.com/search/thread/3543301?query=kernel
Click to expand...
Click to collapse
Hello Goodnight
they will know if Synergy 14.1
Will it be compatible with N900v?
since it does not detect the sim if I install Synergy 19 .. / Synergy RC19 Unified 06012018
Thank you
ASk in Verizon forum .
Verizon Note 3 forum is here: https://forum.xda-developers.com/verizon-galaxy-note-3
Hmm...I have a distinct feeling that this post is relating to the fact that the OP's phone is unable to boot the later Resurrection Remix OS's, due to the fact that they are one of the 'unlucky ones' with kernel issues on their Note 3, like myself. @JJEgan knows what I am talking about. I suggest that the OP reads the last fifteen or so pages of this thread - https://forum.xda-developers.com/ga...rp-3-2-1-1-t3746760/post77193256#post77193256
I may be wrong, and you might not have this problem with your phone. It's just a hunch. If I am right though, I will say to you that at this moment in time, the case remains UNSOLVED, as nobody currently seems to know what the issue is.
I have made developers on here aware of it, such as @ashyx , @bigbiff and @ripee
Chris

Categories

Resources