i have lg g2 d802, i have installed TWRP and when im updating KK via OTA it backs to twrp.
and im try this code in the link http://forum.xda-developers.com/showthread.php?t=2451696
but my phone restart and just stuck on lg logo and blinking green/blue
then i have enter download mode and want to flash KDZ,
when im running KDZ, my computer says cannt detected and in my G2 screen is firm ware update
please help me :crying::crying:
You can't take an OTA w/ a third party recovery like TWRP or PhilZ CWM Touch installed. If you can't flash the *.kdz or *.tot file from download mode, then you'll need to revert to this method...
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
http://forum.xda-developers.com/showthread.php?t=2582142
If you can get into recovery, then you can just flash another ROM or restore a nandroid. If you don't have a ROM on the internal SD, then you can use ADB to push a ROM to the SD while in recovery.
i can enter TWRP, and i can enter factory reset. then what should i do?i dont have a rom in my internal storage
i can enter download mode and i can enter TWRP. but i dont understand... sorryy im totally newbie.
thanks for your help btw
Flash back to stock and don't touch anything. http://forum.xda-developers.com/showthread.php?t=2432476
All you need to do is SEARCH and you will find what you have to do in order to get the phone to boot up again.
http://forum.xda-developers.com/showthread.php?t=2451696
when flashing KDZ, my computer doesnt detect my LG G2 and cant continue..
and now just stuck in logo lg with blinking LED
Hi Guyz, so i managed to brick my phone yesterday. Was running Optimus G3 and decided to flash CloudyG2 3.3. Followed the instructions did a full wipe but when rebooted LG logo would flash for a split second then screen goes blank. The screen is on because can see the back-light but nothing boots. Tried a couple more restarts but the same thing happens. I did take a TWRP backup prior but when i enter recovery mode and restore the backup, when it reboots i get the LG logo then the android animation but then it freezes/stops on the Android text.
I then tried flashing stock rom via LG Flash Tool, downloaded both kitkat and lollipop kdz files, entered download mode on phone and got the firmware update message, went through the process of flashing with the flash tool but when it comes to the software upgrade part, it gets to 2% then fails. with a message - Upgrade stopped due to an error. I get this message when trying to flash both kitkat and lollipop kdz files and i have tried on both windows 10 machine and windows 7 laptop.
As i have access to recovery i have tried restoring backup many times but it just gets stuck at after the android animation, i guess my next step is to try the tot flash method but im struggling to find a clear guide on how to do this so any advice would be helpful.
Cheers, Justin.
wrong bootleador try flash kk bootleador then kk baseband then wipe then cloudy g2 2.2 and reboot
amin44 said:
wrong bootleador try flash kk bootleador then kk baseband then wipe then cloudy g2 2.2 and reboot
Click to expand...
Click to collapse
Thanks, actually shortly after i posted question it fixed itself... i tried flashing lollipop again, the software upgrade started and it got to 2% then error. I left the LG flash tool open with the error on screen, disconnected phone and rebooted the phone... it went past LG logo and got stuck in boot just after showing android animation, so then i plugged in phone (wanted to see if could access phone via windows whilst stuck at boot) and after a couple of minutes the software upgrade window started on my pc so checked phone and it had switched into Firmware Update mode and was updating... so all good now!! Lollipop has installed and phone all working.
^^^ This may help someone with similar problem.
Thanks,
You should've flashed the kitkat bootloder before.. If you want to go back to cloudy ,flash the kitkat bootlader again..
Hello,
I´ve got a problem with my Samsung Galaxy S5
The History:
I bought a Samsung Galaxy S5 SM-G900f from Ebay with a Software Problem. The seller said, he try to flash a Custom Room like Cyanogenmod, he don´t know which)
The flash failed (i don´t know why). Now the S5 have a brick.
I tried so much, but i can´t repair it, pls help me.
The Problem is:
I can not start the Recovery Menü to flash a new Custom room. Always i tried to start the Menü, there is just a text "recovery Booting", then the phone restarts after round about 10 sec.
So even if i tried to start the S5 normally without recovery Menü, it´s just the Samsung Galaxy S5 Logo power by Android, then the phone restarts all the time.
The only thing i can do is start the download mode.
Things i tried:
- Firmware installation about Kies (pass, but still the Same Problem)
-Firmware Installation about Odin (pass, but still the same Problem)
- CF-Autoroot flashing (pass) then i tried to flash a recovery like PhilZ but then when i tried to open the recovery it`s "Recovery is not seandroid enforcing" Set Warranty bit
I tried so many firmwares but still the same Problem. Now it is installed Lollipop 5.0 G900FXXU1BOI3_G900FDBT1BOI1_G900FXXU1BOI3_HOME
There is no chance to repair it over ADB oder Fastboot, cause USB-debugging is disabled
Maybe you can help me and help me to stop spend all my time for this phone, cause im interested to know how i can repair it.
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
.
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
Try this hold on (power volume up and home) then do not release until recovery mode boot
sh4dow6oy said:
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
Click to expand...
Click to collapse
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
With some of the newer LP based firmwares, twrp 2.8.7.0 klte is the only version that works.....
Other than that, you might find it necessary to odin back to KitKat (flashing a pit file too) and try 'towelrooting' your device.......
BE WARNED.......If you *do* flash a pit file, make sure it's the CORRECT pit for your device.....In some cases, flashing the wrong pit will permanently kill a device.
http://i.imgur.com/rVnFwJM.jpg
So i had try it.
1.)hold on ( volume up and home) then do not release until recovery mode boot
--> The phone always restart no recovery is possible
2.) I try to install on LP the TWRP 2.8.7.0 Still the Same error "recovery is not seandroid enforce" Set Warranty bit: recovery
Before i root the device with CF-Autoroot and it´s pass
3.) I downgrade to 4.4.2 with a full package of Firmware with CSC,BL,AP,CP and a pit file.
The downgrade pass, when the phone starts it says recovery booting in blue script, then the phone restarts. I can´t intstall towelroot, cause the system is not booting, so i´d tried to install CF-Autoroot (pass) and then also the TWRP 2.7.0.0 pass but not booting and then 2.8.0.0.
But still the same "recovery is not seandroid enforce" Set Warranty bit: recovery
If you got a pass on your KK flash, you have a stock recovery......
Have you tried booting into that recovery and wiping cache and factory resetting? It is necessary to do this when downgrading......
http://i.imgur.com/rVnFwJM.jpg
Yes it was a KK stock recovery.
I tried to boot in this recovery, but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds.
It´s not possible to wipe cache or make a factory reset, cause the recovery is not booting. That´s my problem. Also when i have flash the stock firmware i tried to go into the recovery but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds. ( 4.4.2 and 5.0)
I´can´t flash a custom rom cause the recovery is not booting. I´ve no idea
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
http://i.imgur.com/rVnFwJM.jpg
Very familiar -
https://dl.twrp.me/klte/
Flash TWRP 2.8.7.0 .TAR (Do not unzip) with ODIN 3.10.7 - in Download mode (Volume Down & Home & Power)
It will say "recovery is not seandroid enforce" Set Warranty bit" at the top when you boot into recovery, give it a few seconds and you should see the TWRP blue splash screen, and then recovery should load up
Then flash a custom ROM from TWRP
--
If that all still fails, try flashing the PIT file for the G900F along with a Stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract this one so it is .PIT, and add it to ODINs PIT section
If that still fails, try flashing just the PIT file with ODIN, and then the TWRP 2.8.7.0 with ODIN and see if you can get in that way
Or PIT and TWRP together
Try a combination until you get back in
Also try different versions of TWRP from 3.07 up to 3.10.7
keithross39 said:
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
Yes i did, than the it happen what i wrote upside
What do you mean with "@'detection' does the OP's situation sound familiar?....."
Click to expand...
Click to collapse
It sounds familiar because it's happened to many other people recently too, although TWRP usually fixes it
Follow my instructions above
No chance guys,
i´d tried to install all TWRP which i found once in 5.0 and also i tried to install on 4.4.2. But always the same mistake. (recovery is not se.....)
Now i´ve tried to install CWM-Recovery and now there is no mistake like upside. Now in blue "recovery booting" and in yellow set warranty bit: recovery
But the recovery is not booting, the phone always make a restart. I´d also tried to install the recovery without auto-reboot in odin. But no help.
I don´t understand, cause when i flash a Stock Firmware, the recovery menu ,in my opinion, it have to start, but it doesn´t. Maybe i have anexpensive paper weight now
I search the internet to install a Custom room over Odin, but i don´t find any results, so i think it is not possible.
Do you have more ideas? Pls help. Thanks
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
check PM
bowzee said:
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
Click to expand...
Click to collapse
Another idea?
Joda899 said:
Another idea?
Click to expand...
Click to collapse
Ithink you should try re instal original firmware using odin and get ur warranty back then fix it on samsung
I found a trick that seems to help slightly, until an actual solution is published. During a misbehave episode, assuming that something shows up (which is not always the case):
1) press <power + home + vol-down> until the download thing shows up
2) press <up-arrow> so that it actually gets into download mode
3) press <power> until the screen turns off and immediately release (otherwise it will try to reboot); this makes it stay off
4) let it "rest" for a certain period of time (could be 5 minutes or more)
5) back to normal
Did u root your device vai CF auto root? Did it work?
So, I did brick my D802 in some way.
After a long history from cloudy g2-g3, rr, cm12, cm13, lineage 14.1, I clicked by mistake on the OTA of the lineage.
I thought I could stop the update once in the recovery, but I got stucked in the recovery bootloop. I got rid of it via recovery terminal, but system didn't boot. I tried reflashing lineage, nothing happened, I tried restoring a cm13 full backup, nothing happened, so I got back in download mode to restock with lollipop kdz (the one I used every time I restocked to change rom). It did not work, and I had to download a different KDZ to get to stock again.
Now, all the methods always used to root + recovery didn't work, so I manually rooted, installed the proper AUTOREC, but it didn't work (as I understand after hours of searching because supersu had updated himself in the meantime).
So I tried to install the TWRP image using flashify, it didn't work and corrupted something in my recovery. So i tried to unroot everything and reinstall the original root + supersu without letting him autoupdate. Not working.
Well, now I can boot and I can get in original lollipop rom, but I have no recovery and download mode appears but doesn't work anymore (once I had 3 COM ports when connected in download mode, now I can see only one; kdz flash does not sense the phone connected). When I try to open recovery I got the error "boot certification verify, secureboot error" in the top left corner of the screen, then a white page opens with the message "critical error" "demigod crash handler", volume up to download mode (that opens but does not work), volume down to reboot.
Now, I am stucked, I cannot find any suggestion of what to do to get the recovery working or to get the download mode working again.
Any help will be highly appreciated.
Thank you very much guys.
Not sure will it help but you may give it a try:
https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076