Database Users

[Q] LG G2 Bricked! PLEASE HELP!!!

i have the VZW G2 (VS-980) and its stuck in fastboot mode. ive tried all the different methods listed in these forums and nothing has worked. i cant get into download mode as everytime i try, download mode shows for a second then goes into fastboot mode again. PLEASE HELP!!

simon_lefisch said:
i have the VZW G2 (VS-980) and its stuck in fastboot mode. ive tried all the different methods listed in these forums and nothing has worked. i cant get into download mode as everytime i try, download mode shows for a second then goes into fastboot mode again. PLEASE HELP!!
Click to expand...
Click to collapse
How the hell did you brick it? Give us some more background on what tweaks, root methods, flashing recovery methods did you use or else its hard to diagnose the issue.

ericdabbs said:
How the hell did you brick it? Give us some more background on what tweaks, root methods, flashing recovery methods did you use or else its hard to diagnose the issue.
Click to expand...
Click to collapse
ok. i was on stock. rooted with the IO method. wanted to flash a ROM (clean rom). downloaded ROM, wipe dalvik/cache/data. after reboot, phone booted into recovery mode. tried going into download mode to revert back to stock and LG FlashTool failed. said phone was the wrong model number (D802). the ROM i Downloaded said it was for VZW G2. obviously it wasnt. so i finally ended up using fastboot to push boot image and it booted, but in about phone, it says it D802 model (i just got it to boot, where as before i was stuck in fastboot mode). now i need to return to stock, but dont know how. any ideas?

Check out this thread:
http://forum.xda-developers.com/showthread.php?t=2517649&highlight=bricked

Gnarfsan said:
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=2517649&highlight=bricked
Click to expand...
Click to collapse
well, i actually was able to restore a backup i had of my stock rom and that fixed the model number prob, however now i cant get into download mode so i can do a reflash :/

simon_lefisch said:
well, i actually was able to restore a backup i had of my stock rom and that fixed the model number prob, however now i cant get into download mode so i can do a reflash :/
Click to expand...
Click to collapse
Even following the steps posted in that thread?

Gnarfsan said:
Even following the steps posted in that thread?
Click to expand...
Click to collapse
yes. not sure why its doing that. is there any way that download mode can be deleted from the phone? also, how do you get into fastboot mode?
EDIT: nevermind. i finally got it into download mode!! (thank god!!) flashing right now. damn that was a pain in the ass. i was starting to freak out that i messed up my phone. this is my first LG phone so this process is a little new to me (been on moto for the last few years) thanks for trying to help me out. this was def a learning experience.

Phew, I'm glad to hear that. Some day I will be in the same situation
Sent from my LG-D802 using XDA Premium 4 mobile app

Just a quick question. Why would you even need to go into download mode to flash a Rom? Never once have I done that. Really, just curious.
Thanks Devs. From my VZW G2.

trickster2369 said:
Just a quick question. Why would you even need to go into download mode to flash a Rom? Never once have I done that. Really, just curious.
Thanks Devs. From my VZW G2.
Click to expand...
Click to collapse
I was thinking the same thing. It's best to stay out of those modes. Get a recovery installed ASAP and do everything that you need to do from there. I recommend TWRP Recovery.
Sent from my LG-D802 using XDA Premium 4 mobile app

Maybe because when flashing stock rom download mode is needed (atleast in my old sammy phone, maybe same in moto phones)

What's wrong with restoring the backup of the stock rom that should have been made before wiping and flashing a different rom? Not sure what I'm missing here.
Sent from my Nexus 10 using XDA Premium HD app

Download mode is useful to flash the entire phone back to stock using the OEM tools. It's not just for the stock ROM. It's everything. It's useful if you get a bit carried away in TWRP and wipe partitions you really shouldn't be touching. Or if you somehow manage to bork your recovery, or at least can't get into it. It's also good if you want your phone to be completely stock to sell it or to send it in on warranty. I'm sure someone could come up with other scenarios where it's useful.
But yes, it is a good idea to keep a backup of your stock ROM. And as always, know what you're flashing, make sure it's for your phone and check md5s. And be mindful of what you're doing in recovery. You should be able to avoid most issues. Download mode is indeed something you shouldn't be using often but as I said above there are situations where it is useful or necessary. It's actually something I suggest you know how to use. I say it's always a good idea to know how to get back to complete stock for warranty stuff, selling, or if something just goes majorly wrong.

The Rom I was trying to flash was apparently for a different model number, yet it was under the Verizon thread. There was no md5 to cross reference. In the end I ended up finding the proper boot image/twrp files and pushed them via fastboot (since I was unable to use adb) which then allowed more to restore a backup of the original Rom. Just took me all night to finally get back to stock. Then I decided to restore to out-of-the-box stock just to make sure all files weren't corrupted our anything.
Sent from my VS980 4G using Tapatalk

Not for nothing, but I ran the LG flash tool without putting the phone in download mode and it worked fine.

Semantics said:
Not for nothing, but I ran the LG flash tool without putting the phone in download mode and it worked fine.
Click to expand...
Click to collapse
Hmm.....interesting. I may try that next time I have to flash to stock.
Sent from my VS980 4G using Tapatalk

Same Problem
simon_lefisch said:
The Rom I was trying to flash was apparently for a different model number, yet it was under the Verizon thread. There was no md5 to cross reference. In the end I ended up finding the proper boot image/twrp files and pushed them via fastboot (since I was unable to use adb) which then allowed more to restore a backup of the original Rom. Just took me all night to finally get back to stock. Then I decided to restore to out-of-the-box stock just to make sure all files weren't corrupted our anything.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Can you fill me in on how you used fastboot to install twrp? I am in the same boat right now...

i'm stuck as well in Fastboot and can't figure it out

emmur0 said:
i'm stuck as well in Fastboot and can't figure it out
Click to expand...
Click to collapse
I sent you a pm

You can you adb side load which is the same for flashing rom, pushing, or pulling file from the phone which is the first thing to learn before flashing anything to the new device that you got and know nothing about.
Sent from my LG-LS980 using xda premium

[Q] Can not get into download Mode LG G2 AT&T

HI Folks, Before you say just press the volume up and insert the usb cable to get into download mode, I have tried that. Does not work! So that makes using lg flash tool useless. A little history my be in order here.. MY wife swapped her phone and got the lg g2. it worked fine. She gets an update from at&t and excepts it not knowing that her phone was rooted. You know the rest.
Know I have tried everything suggested on these forums to get it working. I have sideloaded a rom using adb which installs but boots right back into clockworkmod recovery. I have pushed the rom and selected install from zip, It installs and boots righ back into clockwork mod recovery. I have wiped the entire phone multiple times and re flashed, re installed the rom and it boots back into clockwork mod recovery.
I am at a loss here. It seems like the flash tool is the way to go IF you can get into download mode.This phone will not go into down load mode. I have worked on this for 3 days now per every instruction on her and nothing. Does any one have any suggestions that I may have overlooked?

Try below link.
http://forum.xda-developers.com/showthread.php?t=2451696
Sent from my LG-D800 using xda app-developers app

Need serious help fast

Running twrp rooted stock rom on verizon. Everythings been fine since Ive had this which has been around a month. All of a sudden my phone restarts by itself and goes into recovery. I tried to restart and it just stays in recovery mode. I only have about 8% battery left now and have no clue what to do. Just plugged my phone in and I cant tell if its actually recharging. Anyone know what to do? Ive tried a restore and its still stuck in recovery. V2.6.3.3 any help is very much appreciated. thanks

Camoxjeep said:
Running twrp rooted stock rom on verizon. Everythings been fine since Ive had this which has been around a month. All of a sudden my phone restarts by itself and goes into recovery. I tried to restart and it just stays in recovery mode. I only have about 8% battery left now and have no clue what to do. Just plugged my phone in and I cant tell if its actually recharging. Anyone know what to do? Ive tried a restore and its still stuck in recovery. V2.6.3.3 any help is very much appreciated. thanks
Click to expand...
Click to collapse
Flash a new ROM... hopefully you have the zip of the one you are currently using?
Sent from my LG-G2 using Tapatalk

Jank4AU said:
Flash a new ROM... hopefully you have the zip of the one you are currently using?
Sent from my LG-G2 using Tapatalk
Click to expand...
Click to collapse
How do I do that? its the stock rom. I never loaded one a different one.

Oh, I thought you were just using one of the stock ROM's from xda... not the actual one that came with the phone. However, you can try to push a new one to your phone with adb and flash that. Do you still have the recovery zip? Maybe recovery just went bad and you can reflash it...?
Sent from my LG-G2 using Tapatalk

Jank4AU said:
Oh, I thought you were just using one of the stock ROM's from xda... not the actual one that came with the phone. However, you can try to push a new one to your phone with adb and flash that. Do you still have the recovery zip? Maybe recovery just went bad and you can reflash it...?
Sent from my LG-G2 using Tapatalk
Click to expand...
Click to collapse
any links how to do that with adb? Been out of the loop with flashing and came from a motorola phone so LG way is way different. thanks

Camoxjeep said:
any links how to do that with adb? Been out of the loop with flashing and came from a motorola phone so LG way is way different. thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2371634
Here's one thread. You should Google it for other I instructions but there are tons of them. Also try to find the adb and/or SDK download files.
Sent from my LG-G2 using Tapatalk

OK, still working on this. Dont have but a few hours here and there to get this running again. Been to tons of pages reading, reading and more reading. Downloaded and installed SDK manager. I guess it also installs ADB. I found it within the SKD Platform-tools folder but when I click on it all it does is open, goes thru a ton of commands then closes. I also found it in C:ADB folder. Does the same thing. Doesnt stay open so I can type anything in it? Ive got flashtool installed also. I cant get into download mode on my phone either.
Also trying to go this route LG G2 Stock Firmware (Go Back to Stock) in General section but dont know exactly which file to download. Right now downloading the VS98010B_13 file. Probably need the VS98011A_01 but man it takes an hour to download. Which one do I use? Also dont know if I have the D800 or D802? My box says LG-VS980. Dont know if that matters. But again I dont think I can use this method as I cant get into download mode.
I do download the KDZ files and not the TOT files right?
Any other help would be greatly appreciated. thanks

Try the return to stock method with the vs98010b file first. Sounds like ur phone took an OTA hence the recovery bootloop. If u can get back to stock I'd root right away and stop any of the OTAs. U can just flash the 12B ROM and radios after installing a recovery.
Don't flash or use any files for d800 or d802, Verizon model is vs980.
Sent from Verizon logo plastered G2 bastard

OK, kept googling different things and kept reading pages from here and ran across this http://forum.xda-developers.com/showthread.php?t=2451696 [FIX] Installed TWRP and now you're stuck after OTA under G2 Android Development. Man, that fixed it and wish I wouldnt have flashed that backup I had now, took me back a month where Ive changed a few things on my phone since but I do have my phone back. Still would like to know which file to download so I have it down the road.

If your in twrp have you tried to aideload a ROM then see if it flashes? Just need adb installed on PC and setup, drivers installed and ROM on hand.....

AEONFLEX Q&A Troubleshooting

You know what to do. If you have any questions or problems come here. Me or someone else will do our best to help you resolve any issues.
Fauert said:
@bigfau, any fix for camera issue ?
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
farhanito said:
D802?
Try "App Settings" module in Xposed. Change camera DPI to 479 or 481.
ÆONFLEX - 3.0.1
Click to expand...
Click to collapse
ÆONFLEX-3.0.3 Why Flash Anything Else.

droidiac13 said:
No problem and I wish I had better news for you. I don't think LGFlash is going to help. Again, I hope I'm wrong. I've seen too many of my friends go through it though. I would check to see if you can have it replaced.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
How do u back up your EFS files
Sent from my LG-D801 using XDA Premium 4 mobile app

**This is "my" way of doing things on my D800. I cannot take any responsibility for your device getting effed up no matter who's directions you follow!"
So you think you've got issues with this ROM? Won't boot, flash or start-up. Well, maybe you haven't followed the proper flashing sequence or you have a bad download. Did you know that 99.999% of the issues people are having is user related? Well, maybe I don't know the exact percentage, but you get my drift.
Seriously though, before posting a question, make sure you have done all the personal troubleshooting possible. To help make this a little easier, I am posting the exact method I use for flashing this ROM and I haven't had a single issue.
Before flashing any ROM, you should always be sure to do a proper back-up of your EFS files. This could very well save you from a bricked G2 and save you from having headaches if you do something wrong during the flash, wipe, etc...
The method I use is to download FreeGee from HERE. Once you have downloaded and installed FreeGee, you will have an option for backing up your EFS files and also will provided the different versions of TWRP (TWRP is all I use). Once your EFS files are backed-up, immediately upload them to the "cloud". If you need a good cloud app, HERE is one.
Now that you have this done, you are ready to attempt installing a custom ROM. Here are the steps that I take:
1. Boot into recovery
2. Make a back-up of your current ROM
3. Go back to the recovery home screen
4. Hit the Wipe button
5. Hit the Advanced Wipe button
6. Check the boxes for Dalvik Cache, System, Data and Cache. DO NOT CHECK THE INTERNAL STORAGE BOX!!!
7. Once the wipe is complete, go back to the recovery home screen
8. Hit the Install box
9. Choose the ROM you want to install
10. Swipe to confirm the flash
Once the flash is done, it should say successful if all went correctly. From that screen hit Reboot System. You should see the sweet boot screen and then be brought to the setup screen.
If you have done all this and you are still having trouble, please re-download the ROM and follow the steps again. You may have gotten a bad download.
If after you have followed these steps twice and you still have a ROM specific question, post away.
If anyone has something to add to this, let me know and I will add it. I hope this helps at least one person. bigfau, if you want me to remove this, please let me know.
Other Notes:
~ If you are on the software version that ends with "o", you will likely have to LGFlash back to the "d" version. @AyDee Thank you!
~ The newer version of TWRP and Philz Recovery may cause issues with flashing. I am using TWRP v2.6.3.3 and have no issues with it.

You could add that ATT users coming from the 'o' firmware need to roll back to 'd' and that a lot of users are having issues with the newest TWRP and Philz.
Not rom-specific but worth mentioning.

Anyone use Facebook Messenger on D800 with 3.0 and have it open two apps when you run it? Tried uninstalling and installing it again and still does it. Only app that does. Any idea how to fix it?
Sent from my LG-D800 using Tapatalk

Hello, I have the lgsetupwizard force close... What I do? Thanks!
Enviado desde mi LG-D802 mediante Tapatalk

When i want make a phone call from contacts app i got force closed, any idea ? Thx a lot
Click to expand...
Click to collapse
Up
Envoyé de mon unknown en utilisant Tapatalk

CotoZ said:
Hello, I have the lgsetupwizard force close... What I do? Thanks!
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
Just flash back to your stock kdz and then flash the rom, the issue can be solved.

Is there a 3.0.3 version out?

freakyd9984 said:
How do u back up your EFS files
Sent from my LG-D801 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
See #3 , You can use Freegee app from playstore .

muhyidin said:
Up
Envoyé de mon unknown en utilisant Tapatalk
Click to expand...
Click to collapse
I had same issue from clean install. I wiped cache and contacts. I replaced apks from 3.0.2 and also 3.0.1 but got fc. I solved by another fresh install. Now all works.

good morning last dorimanx rom comes with 1.4? correct?

jaco1975 said:
good morning last dorimanx rom comes with 1.4? correct?
Click to expand...
Click to collapse
Huh? Dorimanx makes a kernel, not a rom. I don't think this rom includes dorimanx kernel. However, you can flash it after installing the ROM.
Sent from my LG-D800 using Tapatalk

hey guys just want to share my experience when updatin 3.0.1 to 3.0.2.. here it goes . after i flash 3.0.2 i wipe also dalvic cache and after that i reboot my phone and got stucked at fastboot mode .. i just did search a little on the web . didnt find any answers . but then again as my experience of my phone being bricked i suddenly realize that i think i have a wrong kernel in my phone.. so what i did was to download stock based kernel . access my phone to twrp recovery . flash the stock kernel then reboot . :crossfingered: then it works like a charm . it booted . and now i am happy w/ my phone . ) i hope this one help someone thankss
Sent from my unknown using XDA Premium 4 mobile app

josh012 said:
hey guys just want to share my experience when updatin 3.0.1 to 3.0.2.. here it goes . after i flash 3.0.2 i wipe also dalvic cache and after that i reboot my phone and got stucked at fastboot mode .. i just did search a little on the web . didnt find any answers . but then again as my experience of my phone being bricked i suddenly realize that i think i have a wrong kernel in my phone.. so what i did was to download stock based kernel . access my phone to twrp recovery . flash the stock kernel then reboot . :crossfingered: then it works like a charm . it booted . and now i am happy w/ my phone . ) i hope this one help someone thankss
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You DL and flash stock based kernel , from where and what ? access your phone by sideload or ??

Fauert said:
You DL and flash stock based kernel , from where and what ? access your phone by sideload or ??
Click to expand...
Click to collapse
i tried dorimanx kernel its a stock based kernel . i flashed it tru twrp . i have accessed using hardware keys combination . power down your phone. then hold power + volume - then when you see the lg screen . release your fingers then push it can using the same keys . you will be headed in factory reset mode . if yiu have installed twrp earlier before you bricked your phone . just follow tje step on the screen dont be afraid because that will only lead you to the recovery mode ..
Sent from my unknown using XDA Premium 4 mobile app

WIFI issue
I installed this rom on my D801 and seemed to go well. I booted up phone and could not connect to WIFI so I bypassed that part and when on. Everything seemed to be working so I went into WIFI settings again and tried to connect again but still wouldn't connect just kept searching. Can anyone help me resolve this issue because this really is a great looking rom and would like to use it?

jimmydee62 said:
I installed this rom on my D801 and seemed to go well. I booted up phone and could not connect to WIFI so I bypassed that part and when on. Everything seemed to be working so I went into WIFI settings again and tried to connect again but still wouldn't connect just kept searching. Can anyone help me resolve this issue because this really is a great looking rom and would like to use it?
Click to expand...
Click to collapse
I had similar problem on D800 and solved it by flashing TWRP 2.6.3.3 and then re-flashing this ROM. Hope it helps.

What are the changes in the last version

josh012 said:
i tried dorimanx kernel its a stock based kernel . i flashed it tru twrp . i have accessed using hardware keys combination . power down your phone. then hold power + volume - then when you see the lg screen . release your fingers then push it can using the same keys . you will be headed in factory reset mode . if yiu have installed twrp earlier before you bricked your phone . just follow tje step on the screen dont be afraid because that will only lead you to the recovery mode ..
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I "mis"understood you lol .... flash the stock kernel ... habla .... habla... :laugh:

lg g2 bircked

I was flashing the KDZ after i got stuck a boot loop and it won't go into recovery, the LG tool showed ???? for all text then it crashed and my phone powder off and now i am unable to get into download mode. when i try to go into download mode it just goes onto a blank screen and mounts drives f ~ Q on my computer.
imgur links below (can't add links yet)
/8mAeRYQ.png
/cUUhhWq.png
EDIT: I have tried everything even opening the phone to short the testing pins but nothing worked. looks like i have to get a new phone it's sad to say goodbye

vorticalbox said:
I was flashing the KDZ after i got stuck a boot loop and it won't go into recovery, the LG tool showed ???? for all text then it crashed and my phone powder off and now i am unable to get into download mode. when i try to go into download mode it just goes onto a blank screen and mounts drives f ~ Q on my computer.
imgur links below (can't add links yet)
/8mAeRYQ.png
/cUUhhWq.png
EDIT: I have tried everything even opening the phone to short the testing pins but nothing worked. looks like i have to get a new phone it's sad to say goodbye
Click to expand...
Click to collapse
WAIT, your phone can still be fixed. Use srk tools to unbrick your device. If you see multiple disk drives your phone is still revivable.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
WAIT, your phone can still be fixed. Use srk tools to unbrick your device. If you see multiple disk drives your phone is still revivable.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I tried the tools the unbrick didn't work. the device isn't showing up like it does in the video see my second screen shot. I will try it again though.
edit: right went and did it again and I still have no download mode but I can get the recovery menu, I replaced the recovery img in the folder to tWPR to try boot it but again black screen when I try. I will try replacing the files with the .img form my current rom and see if she boots
Edit 2: I see lots of disks like above but still no download mode when connecting via USB, just about to give up on this darn phone

vorticalbox said:
I tried the tools the unbrick didn't work. the device isn't showing up like it does in the video see my second screen shot. I will try it again though.
edit: right went and did it again and I still have no download mode but I can get the recovery menu, I replaced the recovery img in the folder to tWPR to try boot it but again black screen when I try. I will try replacing the files with the .img form my current rom and see if she boots
Edit 2: I see lots of disks like above but still no download mode when connecting via USB, just about to give up on this darn phone
Click to expand...
Click to collapse
hold on what phone model do you have?

xmayhemreturnsx said:
hold on what phone model do you have?
Click to expand...
Click to collapse
I have d802, I found a different tool that worked just fine got my phone up and working now.
EDIT: ok so after getting back to stock KitKat I now can't flash custom ROM's tried flashing cloudy g3 and it went back to brick mode

What tool did you use to unbrick your phone?

fabiosilva said:
What tool did you use to unbrick your phone?
Click to expand...
Click to collapse
I used forum.xda-developers(.com)/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
I have a working phone on kit Kat and that's ok.

vorticalbox said:
I have d802, I found a different tool that worked just fine got my phone up and working now.
EDIT: ok so after getting back to stock KitKat I now can't flash custom ROM's tried flashing cloudy g3 and it went back to brick mode
Click to expand...
Click to collapse
In order to flash cloudy g3 lollipop you need to flash the KitKat baseband before you install it.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
In order to flash cloudy g3 lollipop you need to flash the KitKat baseband before you install it.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yeah it was a late one last night spending all day trying to fix it lol thanks for the help.

xmayhemreturnsx said:
In order to flash cloudy g3 lollipop you need to flash the KitKat baseband before you install it.
Click to expand...
Click to collapse
I love you, man! So simple, and yet it solved my problem flashing CloudyG2 3.3! I tried flashing it from stock KK, and couldn't do it no matter what, until I did what you said. When reading other posts, I understood KK baseband is needed when you flash from JB. Didn't realize the same applies when you are coming from stock KK. Jeez...
Anyway, big THANK YOU! :good:

kt-Froggy said:
I love you, man! So simple, and yet it solved my problem flashing CloudyG2 3.3! I tried flashing it from stock KK, and couldn't do it no matter what, until I did what you said. When reading other posts, I understood KK baseband is needed when you flash from JB. Didn't realize the same applies when you are coming from stock KK. Jeez...
Anyway, big THANK YOU! :good:
Click to expand...
Click to collapse
No problem, I'm glad I could help.
Sent from my LG-D800 using Tapatalk