I'm using minirom Touchwiz UX inspired and it's wifi not working . I can open the wifi,but i couldn't found any hotspt . Please help !!!!
if it just says scanning when turning on wifi make sure you are using the correct wifi driver for the kernel you are using
hells fusion #50 and whites kernel uses whites wifi driver
most other stock based kernels use stock wifi driver
marcussmith2626 said:
if it just says scanning when turning on wifi make sure you are using the correct wifi driver for the kernel you are using
hells fusion #50 and whites kernel uses whites wifi driver
most other stock based kernels use stock wifi driver
Click to expand...
Click to collapse
So, should I flash stock rom? Or there is another way to solve this?
GalKill said:
So, should I flash stock rom? Or there is another way to solve this?
Click to expand...
Click to collapse
since I dont think you understand what the problem is best to flash stock rom via odin
GalKill said:
So, should I flash stock rom? Or there is another way to solve this?
Click to expand...
Click to collapse
I had once such problem on my own custom ROM. Wi-Fi worked previously and then stopped working.
I flashed my kernel (boot.img) again (I was using Stock Modded Kernel by me) using SGY Aroma Toolkit.
Problem was solved.
Press Thanks if helped.
Solved by flashing stock kernel
Related
Hi,
I just flashed the Zierex Rom. Everything works fine, except wifi and Bluetooth, they are not turning on. Is there any way to fix this? Please help!
Marcus
marcusflint said:
Hi,
I just flashed the Zierex Rom. Everything works fine, except wifi and Bluetooth, they are not turning on. Is there any way to fix this? Please help!
Marcus
Click to expand...
Click to collapse
Its a kernel problem.Try changing your kernel.
Thanks for your reply.. but if i change the kernal from percy cm#2 to white RC3 or Repencis, my phone is not booting up, it get stuck at the galaxy y logo.
if it is a stock based rom and you are on a ext4 partition from using percys kernel then switch to hells fusion #50 else flash stock rom via odin before flashing a stock based rom after using a cm7 rom
you cant use percys cm #2 on a stock based rom
marcussmith2626 said:
if it is a stock based rom and you are on a ext4 partition from using percys kernel then switch to hells fusion #50 else flash stock rom via odin before flashing a stock based rom after using a cm7 rom
you cant use percys cm #2 on a stock based rom
Click to expand...
Click to collapse
Thanks a lot, that fixed the problem :good: :victory:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
kernel
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
purekat is build on base as AOSP..... so u will need to flash percy or black reactor since hell's fusion supports stock base roms:laugh:
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
not sure about purekat. I tried hells fusion on reincarnation (cm7). .device boots... but wifi & bluetooth won't work ... guess it's same for purekat
hells fusion #50 can boot cm7/aosp but it does not have the correct moduals for wifi/bluetooth for use on cm7/aosp therefore if you want a fully operational phone you need to use a kernel built for cm7/aosp like percys or black reactor
better to use cm kernel !!
Boot loop
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Sanjuujosephh said:
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Click to expand...
Click to collapse
hells fusion will not cause a boot loop - hells fusion can boot cm and aosp based roms but does not contain the moduals needed for wifi and bluetooth to work (it contains moduals for use on stock based only) hense why you need a cm/aosp kernel for full phone functions
I prefer u use BlackReactor . i have use it once .
[iPhone 6] or [Samsung Galaxy S5]
>>SG Y - Hyperion 8 Rom<<
>>SG S3 mini - Official Stock Rom<<
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
abhishekr700 said:
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
Click to expand...
Click to collapse
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Go for Black Heart
marcussmith2626 said:
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Click to expand...
Click to collapse
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
abhishekr700 said:
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
Click to expand...
Click to collapse
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
marcussmith2626 said:
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
Click to expand...
Click to collapse
so i can only use cm kernel not even v4 ?
abhishekr700 said:
so i can only use cm kernel not even v4 ?
Click to expand...
Click to collapse
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
marcussmith2626 said:
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
Click to expand...
Click to collapse
Lull, thats frustrating enough...
however,
Read the op carefully guys,
ops are written very carefully.
so,
CM version == ONLY AND ONLY CM/AOSP roms.
v5 and v4 == Only for stock based roms... (However, they can booth both aosp and cm7, but ur wifi or bluetooth wont work,) pick ur poison
AH..FINALLY
Ok
i got my answer
mods please close this thread
My proximity sensor us not working ....please help
raunakb said:
My proximity sensor us not working ....please help
Click to expand...
Click to collapse
you need to provide more information
rom and kernel you are currently using
it maybe a rom bug - you can try copying the sensor lib files from a working stock rom into your rom and set permissions
If you dont know how to do this I would suggest using a different rom or flash stock rom via odin
More info
I m usnig hells fusuon #50 kernel.and stock rom gingerbread 2.3.6
raunakb said:
I m usnig hells fusuon #50 kernel.and stock rom gingerbread 2.3.6
Click to expand...
Click to collapse
no reason why it wouldnt work then if no other changes have been made
All I can suggest is flash stock rom via odin and then test - if it still doesnt work being on a fresh stock rom then it maybe hardware fault
Thanks
Thanks, I will try it
I am using A7 S8 Ux 2017 Rom but My Device is J510S and I cant use WiFi. What is the problem? I can modify kernel and rom. Anyone who know how to solve this problem?
choiwooyoung said:
I am using A7 S8 Ux 2017 Rom but My Device is J510S and I cant use WiFi. What is the problem? I can modify kernel and rom. Anyone who know how to solve this problem?
Click to expand...
Click to collapse
problem is most likely wlan.ko and pronto_wlan.ko use wlan driver that came with the kernel, If the kernel didn't come wlan driver look for one. you can try using stock kernel with stock wlan.ko.
SpamMachine said:
problem is most likely wlan.ko and pronto_wlan.ko use wlan driver that came with the kernel, If the kernel didn't come wlan driver look for one. you can try using stock kernel with stock wlan.ko.
Click to expand...
Click to collapse
Thank you sir Have a Nice Day
I'm using RR 6.0.0 2018525 and yesterday i flashed a custom kernel project r8 after installing the kernel everything was fine... yesterday evening i notice that WiFi is not starting up....it click to toggle it but it automatically gets off...and hotspot also not starting up... anyone please help me WiFi is very important for me please guide me...is something wrong with presist partition...or what ?
Problem with wifi drivers
Solution: try another kernel or dirty flash again the rom without using a custom kernel
Valentino911 said:
Problem with wifi drivers
Solution: try another kernel or dirty flash again the rom without using a custom kernel
Click to expand...
Click to collapse
Already did but no success...flashed RR again without custom kernel but problem still exists
Valentino911 said:
Problem with wifi drivers
Solution: try another kernel or dirty flash again the rom without using a custom kernel
Click to expand...
Click to collapse
Thanks bro it worked when i tried it 2nd time!!! Happy now
Azeemkwow said:
Already did but no success...flashed RR again without custom kernel but problem still exists
Click to expand...
Click to collapse
You need to flash stock rom and use persist resurrector to fix the problem. Then reflash latest rr and latest custom kernel.
t0per666 said:
You need to flash stock rom and use persist resurrector to fix the problem. Then reflash latest rr and latest custom kernel.
Click to expand...
Click to collapse
I dirty flashed the rr without custom kernel and it solved the problem for me!!