Database Users

Need a TWRP Recovery MD5/WIN.000

Hello, everyone!
I recently have run into some trouble with my (ATT) Galaxy S4 (SGH-I337). I flashed a custom rom and (idiotically) didn't make a backup. Long story short, things didn't quite work out with the new rom. I didn't like it, and I wanted to go back to the old stock firmware. So I decided I would try to do it. I tried flashing with odin, using recovery, etc. Nothing worked so far. I've been researching for about 12 hours now. I think I know what I need. I need a TWRP backup, so that I can move it to the sd, and trick twrp into thinking I backed up my system so I can restore it. Below, I will link a post to what I want. The reason I can't use the below is because it's for a different carrier. If someone would be kind enough to link me something, that would be great. Again, my phone is a ATT Galaxy S4 (SGH-I337). Please help me out!
http://forum.xda-developers.com/showthread.php?t=2506562

Before I help you I want to be absolutely sure.
Are you sure you have an i9505? Because you keep saying ATT. That's a completely different phone. That's the SGH-I337. You can't flash stuff for the i9505 on the SGH-I337.
So what model do you have? Do you have an i9505 or the SGH-I337. My guess would be that you have the SGH-I337.
ps I have no idea what the thread is what you posted. Don't use that thread because its outdated.

Lennyz1988 said:
Before I help you I want to be absolutely sure.
Are you sure you have an i9505? Because you keep saying ATT. That's a completely different phone. That's the SGH-I337. You can't flash stuff for the i9505 on the SGH-I337.
So what model do you have? Do you have an i9505 or the SGH-I337. My guess would be that you have the SGH-I337.
ps I have no idea what the thread is what you posted. Don't use that thread because its outdated.
Click to expand...
Click to collapse
Yes, then I have an SGH-I337.

Lennyz1988 said:
Before I help you I want to be absolutely sure.
Are you sure you have an i9505? Because you keep saying ATT. That's a completely different phone. That's the SGH-I337. You can't flash stuff for the i9505 on the SGH-I337.
So what model do you have? Do you have an i9505 or the SGH-I337. My guess would be that you have the SGH-I337.
ps I have no idea what the thread is what you posted. Don't use that thread because its outdated.
Click to expand...
Click to collapse
Since I did in fact flash the wrong ROM, could I just reflash a new ROM that's compatible with my phone?

dillondonnelly1 said:
Since I did in fact flash the wrong ROM, could I just reflash a new ROM that's compatible with my phone?
Click to expand...
Click to collapse
Yes. You can flash a stock rom for your device.

Lennyz1988 said:
Yes. You can flash a stock rom for your device.
Click to expand...
Click to collapse
Alright, but for some reason I get an error in Odin. It says "SECURE CHECK FAIL". Do you have any idea what might cause this?

dillondonnelly1 said:
Alright, but for some reason I get an error in Odin. It says "SECURE CHECK FAIL". Do you have any idea what might cause this?
Click to expand...
Click to collapse
You need to give way more details.
- Post the complete log here.
- What are you trying to flash?
- What is your bootloader?

Lennyz1988 said:
You need to give way more details.
- Post the complete log here.
- What are you trying to flash?
- What is your bootloader?
Click to expand...
Click to collapse
- Post the complete log here.
Odin Log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Phone Log:
Product Name: SGH-I337
CURRENT BINARY: Samsung Official
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
Write PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
SW REV. CHECK FAIL : fused : 5 , Binary : 1
- What are you trying to flash? I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 (Stock ROM)
-What is your bootloader? (Safestrap)
Also, the firmware came with a SS_DL.dll file. Do I do anything with this file?

Odin won't flash?
Here are the logs. I'm trying to flash the stock firmware with odin, because currently, there is no rom on my device. I have an ATT SGH-I337. Please help.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Phone Log:
Product Name: SGH-I337
CURRENT BINARY: Samsung Official
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
Write PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
SW REV. CHECK FAIL : fused : 5 , Binary : 1

Its probably because you are flashing an old firmware on your new bootloader. What version where you previously on? 4.4.2? Then you can't flash a 4.2.2 rom.
ps stop opening new threads for this. You already got this thread.

Lennyz1988 said:
Its probably because you are flashing an old firmware on your new bootloader. What version where you previously on? 4.4.2? Then you can't flash a 4.2.2 rom.
ps stop opening new threads for this. You already got this thread.
Click to expand...
Click to collapse
Please tell me exactly what to do. I have to get my phone fixed by tonight.

dillondonnelly1 said:
Here are the logs. I'm trying to flash the stock firmware with odin, because currently, there is no rom on my device. I have an ATT SGH-I337. Please help.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Phone Log:
Product Name: SGH-I337
CURRENT BINARY: Samsung Official
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
Write PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
SW REV. CHECK FAIL : fused : 5 , Binary : 1
Click to expand...
Click to collapse
Hi mate ,
check if
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver
Thanks to @samersh72
what software a re you flashing ? if you try to flash an older bootloader Odin will not allowed

[Q] Need Help Urgently please

Hey guys;
hope everything is well;
I own a Samsung Note 3 "9005" after rooting & flashing was trying to wipe cash & restore factory settings!
& right now i have no OS on my phone when i power it up it gives me nothing at all only Samsung Galaxy Note 3 start/boot screen & that's it.
I don't know what to do or how to reinstall OS on my phone & feel totally lost, thought you'd be able to support & assist me if you can please.
would really appreciate it.

DevMinD said:
Hey guys;
hope everything is well;
I own a Samsung Note 3 "9005" after rooting & flashing was trying to wipe cash & restore factory settings!
& right now i have no OS on my phone when i power it up it gives me nothing at all only Samsung Galaxy Note 3 start/boot screen & that's it.
I don't know what to do or how to reinstall OS on my phone & feel totally lost, thought you'd be able to support & assist me if you can please.
would really appreciate it.
Click to expand...
Click to collapse
Download stock OS from sammobile and flash it using odin. A reference video below
http://www.youtube.com/watch?v=_sMnC6UkJBI

Thank you
swagatsourav said:
Download stock OS from sammobile and flash it using odin. A reference video below
I followed the Steps & getting error all the time!
When i reboot in download mode (ODIN MODE) this is what i get ...
ODIN MODE
Product Name: SM-N9005
Current Binary: Custom
System Status: Custom
Reactivation Lock(KK): Off
Knox Kernel Lock:0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P2
Write Protection:Enable
This is the File I'm Flashing: (N900XXUDNC1_N900OLBDNC1_N900DXUDNC1_HOME.tar.md5)
This is the Error I'm Getting:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUDNC1_N900OLBDNC1_N900DXUDNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sboot.bin
<ID:0/022> NAND Write Start!!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Appreciate your Asist swagatsourav!
Click to expand...
Click to collapse

Are you flashing the correct stock firmware for your device? Firmwares may differ across countries and even for the same country with different carriers.

AO7 said:
Are you flashing the correct stock firmware for your device? Firmwares may differ across countries and even for the same country with different carriers.
Click to expand...
Click to collapse
The point is! i have nothing running only can use recovery & Download mode that's all so I'm trying!
Even when i try to install firmware in recovery mode it says footer error.
it's my 1st time to root flash & UN-Root my device, so it's a bit hard

Which firmware did you have before??? Find and flash it with odin

DevMinD said:
swagatsourav said:
Download stock OS from sammobile and flash it using odin. A reference video below
I followed the Steps & getting error all the time!
When i reboot in download mode (ODIN MODE) this is what i get ...
ODIN MODE
Product Name: SM-N9005
Current Binary: Custom
System Status: Custom
Reactivation Lock(KK): Off
Knox Kernel Lock:0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P2
Write Protection:Enable
This is the File I'm Flashing: (N900XXUDNC1_N900OLBDNC1_N900DXUDNC1_HOME.tar.md5)
This is the Error I'm Getting:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUDNC1_N900OLBDNC1_N900DXUDNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sboot.bin
<ID:0/022> NAND Write Start!!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Appreciate your Asist swagatsourav!
Click to expand...
Click to collapse
Dude your flashing (N900XXUDNC1 you need to be flashing N9005XXUFNG2 notice the 5 missing from yours. Dowwnload the right firmware and try again.
Here is the firmware page i get mine from http://www.sammobile.com/firmwares/3/?download=33241
Click to expand...
Click to collapse

[Help] My Phone won't boot (Samsung Galaxy S4)

Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.

GoodMan14 said:
Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.
Click to expand...
Click to collapse
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477

MAX 404 said:
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
That's what he's doing. It should be working.
It MIGHT be because you have non official firmware on it now and it's not accepting the flash back to stock. IF that's the case the solution is to uncheck auto reboot in Odin and run the install sequence twice in a row. That's worth a shot here, but I don't think it's the solution.
Do you still have a working custom recovery? If so you should still be able to flash a custom ROM. I might try flashing a custom TouchWiz rom then starting over.

Still fail !
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!

GoodMan14 said:
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
Hi ,
This is from the post i gave you earlier
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Check and see if it helps , did you try what Skipjacks said?

i di all
Hi, in this morning i tried again and passed.. finally
Thanks for helping.

GoodMan14 said:
Hi, in this morning i tried again and passed.. finally
Thanks for helping.
Click to expand...
Click to collapse
Great news mate
Sent from my Nexus 7 using XDA Premium 4 mobile app

Try flash stock firmware using odin

[Q] Fully Functional Root?

Unhappy Unable To Root
I've tried the Kingo Root (Stays On An Endless Loop), Towelroot (Phone Not Supported Even When Changing The Other 3 Codes That Can Be Found On Google) And By Odin Watching A Thousand Tutorials And None Work, It's Frustrating And Exhausting, I'm sorry if there's another post for this but i got tired of searching and looking, hopefully someone will understand & try to help.
below is what appears in odin when I try to do it through that method...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen appears:
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: Enable
eMMC BURST MODE: Enable
you can find me on facebook at: facebook.com/PeaceBeyondEternity
if you find/know anything and can help me

skater-boy-zero said:
Unhappy Unable To Root
I've tried the Kingo Root (Stays On An Endless Loop), Towelroot (Phone Not Supported Even When Changing The Other 3 Codes That Can Be Found On Google) And By Odin Watching A Thousand Tutorials And None Work, It's Frustrating And Exhausting, I'm sorry if there's another post for this but i got tired of searching and looking, hopefully someone will understand & try to help.
below is what appears in odin when I try to do it through that method...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen appears:
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X0
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: Enable
eMMC BURST MODE: Enable
you can find me on facebook at: facebook.com/PeaceBeyondEternity
if you find/know anything and can help me
Click to expand...
Click to collapse
First off, the Odin method isn't working because CF-Auto-Root is designed for the I337M not the I337. We need more information about your device... head to Settings then About Device. Post the Baseband, the Build Number, Kernel Version,etc. or take a screenshot of it and post it here. Towelroot should work *if* you are on a current version of Android, and if your on MK2 you can use Saferoot.

[Q] How to root SM-N9005 N9005XXUGBOB6?

Hi guys,
Would like to root my Note 3 (currently having the N9005XXUGBOB6 Lollipop update).
Done a few searches.
Found a few tutorials.
None of them seemed to work.
Got this when I try to root (no matter what odin version I've used) :
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Removed!!
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
recovery.img
NAND Write Start!!
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Any idea please?
A working tutorial?
Tks.

Try flashing a custom recovery first....

For N9005
Flash TWRP 2.8.5.0 by ODIN ..
then flash the UPDATE-SuperSU-v2.46.zip from Recovery ..
that's it ..

with this method , TWRP recovery flashed by odin and flash update from TWRP recovery , the knox counter remains at 0x0 ??

jovan.dj said:
with this method , TWRP recovery flashed by odin and flash update from TWRP recovery , the knox counter remains at 0x0 ??
Click to expand...
Click to collapse
NO!

Is possibile gain root with knox 0x0 on lollipop firmware??

jovan.dj said:
Is possibile gain root with knox 0x0 on lollipop firmware??
Click to expand...
Click to collapse
YES! you need Mobile Odin Pro. there are enough tutorials on how to achieve this. just use search. But you still need to be on 4.4.3 KK. In your case, I don't think it is possible. I wouldn't try downgrading on my device. It's just not worth it. If you really want to root your phone, you will have to make a choice. Either you go the safe way and use a tutorial and trip the KNOX flag to 0x1, or you can try experimenting. Which makes more sens?

t3mpt3d said:
Hi guys,
Would like to root my Note 3 (currently having the N9005XXUGBOB6 Lollipop update).
Done a few searches.
Found a few tutorials.
None of them seemed to work.
Got this when I try to root (no matter what odin version I've used) :
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Removed!!
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
recovery.img
NAND Write Start!!
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Any idea please?
A working tutorial?
Tks.
Click to expand...
Click to collapse
boot the device normaly, then enable developer mode AND USB debug
with the following steps ( Setting -> General -> About device )
and click 3-4 times on Build number (until you get message says you are a developer now),
then you must see Devloper options in ( Setting -> General ) click on it and check USB debugging option to on.
after that try to root your device.