Related
I was looking at the setcpu governor and saw a list to choose from..
what are the difference in the way the kernel operate and which is the "better" governor for daily usage?
sorry if this qns has been asked before but the search result generated did not give me what i was looking for..
the only thread that was a bit useful was http://forum.xda-developers.com/showthread.php?t=793311
Bumps... anyone? Or any relevant thread for me to read up on?
Sent from my HTC HD2 using XDA App
From the setcpu website(found with a simple search of "setcpu" on google)
http://www.pokedev.com/setcpu/#7
CPU governors control exactly how the CPU scales between your "max" and "min" set frequencies. Most kernels have "ondemand" and "performance." The availability
ondemand - Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
conservative - Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
performance - Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking.
powersave - Available in some kernels. It will keep the CPU running at the "min" set value at all times.
userspace- A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor.
Click to expand...
Click to collapse
socrated13 said:
From the setcpu website(found with a simple search of "setcpu" on google)
http://www.pokedev.com/setcpu/#7
Click to expand...
Click to collapse
thanks a lot.. just another question, u know whats the advantage of "interactive" vs ondemand?
bump, i'd also like to know the interactive vs ondemand
The SetCPU website explains some governors: http://www.pokedev.com/setcpu/#7
However it seems that some extra governors, not covered by the SetCPU site, have been added to some kernels; which I think should be documented so users know which one to pick.
I will add responses as to what each governor does to this post. If there are any governors not explained that you've come across, please post and we'll see if somebody can explain it.
Unexplained governors (somebody please tell me what they do)
smartass (Best explanation i've found paraphrases to: based on interactive, but better.)
----
ondemand
Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed. - SetCPU website
conservative
Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery. - SetCPU website
performance
Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking. - SetCPU website
powersave
Available in some kernels. It will keep the CPU running at the "min" set value at all times. - SetCPU website
userspace
A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor. - SetCPU website
Interactive
The 'interactive' governor has a different approach. Instead of sampling the cpu
at a specified rate, the governor will scale the cpu frequency up when coming
out of idle. When the cpu comes out of idle, a timer is configured to fire
within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer
fires then we assume the cpu is underpowered and ramp to MAX speed.
If the cpu was not 100% busy, then the governor evaluates the cpu load over the
last 'min_sample_rate' (default 50000 uS) to determine the cpu speed to ramp down
to. - [Patches] For developers, interactive governor patch for leo kernel
Thanks,
RJackson
As explained by MDJ:
SMARTASS GOVERNOR - is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works - by taking over the idle loop - is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the "old" minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 245Mhz (or if your min frequency is higher than 245 - why?! - it will cap it to your min frequency). Lets take for example the 998/245 kernel, it will sleep at 245. No need for sleep profiles any more!
Click to expand...
Click to collapse
FerretAD said:
As explained by MDJ:
Click to expand...
Click to collapse
I saw that one but didn't use it because it didn't really explain what it does.
RJackson said:
smartass (Best explanation i've found paraphrases to: based on interactive, but better.)
Click to expand...
Click to collapse
Which Kernel support SmartAss? I use WildMonks with SetCPU 2.1.0 and I don't see the "smartass" governor in my list.
SalsaForte said:
Which Kernel support SmartAss? I use WildMonks with SetCPU 2.1.0 and I don't see the "smartass" governor in my list.
Click to expand...
Click to collapse
i have the "savage" kernal with smartass
LeeDroid's Kernals and ROMs support smartass as well
Leong428 said:
LeeDroid's Kernals and ROMs support smartass as well
Click to expand...
Click to collapse
Add Tiamat to the list.
add chad's incredikernel
SalsaForte said:
Which Kernel support SmartAss? I use WildMonks with SetCPU 2.1.0 and I don't see the "smartass" governor in my list.
Click to expand...
Click to collapse
On my evo shift the x99 kernel supports smartass for stockish froyo roms and cm7 roms
you have to have a kernel to add smartass to your list
RJackson said:
The SetCPU website explains some governors: http://www.pokedev.com/setcpu/#7
However it seems that some extra governors, not covered by the SetCPU site, have been added to some kernels; which I think should be documented so users know which one to pick.
I will add responses as to what each governor does to this post. If there are any governors not explained that you've come across, please post and we'll see if somebody can explain it.
Unexplained governors (somebody please tell me what they do)
smartass (Best explanation i've found paraphrases to: based on interactive, but better.)
----
ondemand
Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed. - SetCPU website
conservative
Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery. - SetCPU website
performance
Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking. - SetCPU website
powersave
Available in some kernels. It will keep the CPU running at the "min" set value at all times. - SetCPU website
userspace
A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor. - SetCPU website
Interactive
The 'interactive' governor has a different approach. Instead of sampling the cpu
at a specified rate, the governor will scale the cpu frequency up when coming
out of idle. When the cpu comes out of idle, a timer is configured to fire
within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer
fires then we assume the cpu is underpowered and ramp to MAX speed.
If the cpu was not 100% busy, then the governor evaluates the cpu load over the
last 'min_sample_rate' (default 50000 uS) to determine the cpu speed to ramp down
to. - [Patches] For developers, interactive governor patch for leo kernel
Thanks,
RJackson
Click to expand...
Click to collapse
Thanks for the kind descriptions...
I've translated them to Korean for my fellow countrymen!
>,<
http://caleb1783.tistory.com/157
Thanks for this. Smartass has been a mystery to me.
When I installed SETCPU I selected auto-detect, now on my device (not a HD2, but this seemed like a good place to ask as it is directly related) now I have no way to select the governor at all (box is blank), how to I change the detection from automatic to a device type "Tegra 2" in my case, I see no option to allow me to do this?
Thanks,
ERIC
Powersave
I read on this forum that Power save SetCPU governor saves the best battery. I Hope this is true?
I am trying to get my hands on powersave
I can't find powersave in the "market" though.. What's up with that? Can anyone tell me which one it is? Maybe give the name of the developer so i can find it back easier?
thnks in advance
Im using galaxy s 2 with lite'ning rom 6.1 ninphetamine 2.0.5
ssienn said:
I read on this forum that Power save SetCPU governor saves the best battery. I Hope this is true?
I am trying to get my hands on powersave
I can't find powersave in the "market" though.. What's up with that? Can anyone tell me which one it is? Maybe give the name of the developer so i can find it back easier?
thnks in advance
Im using galaxy s 2 with lite'ning rom 6.1 ninphetamine 2.0.5
Click to expand...
Click to collapse
Yeah, that's not how it works. Governors are a part of the kernel. If you want features in your kernel that you don't have, you must flash a new kernel.
also, perhaps you should reread what 'powersave' is. It will keep your phone at the lowest cpu speed constantly. This will save battery, sure, but it will also completely destroy your phone's performance. Might as well go back to your old Moto Razr.
thx, actually, i set those gov randomly before i read this post
Ondemand vs. Smartass vs. Performance gov. - Test
The idea was, that maybe the display eats so much power,
that if it is on, the CPU setting does not make a big different.
Bottom line: it does.
Phone: HTC Sensation, Leedroid Sensational 3.1 (kernel 3.2)
Conditions: Simulating light cpu use like writing email:
Brightness 50% (no timeout), MP3 playing (Volume=1, headphone), a new document on the screen,
Wifi and 3G network off (these have fluctuation, so it is easier to compare if these are off)
Ondemand 192/1188 governor: 5 h 10 min
Performance governor: 4 h 20 min
SmartassV2 192/1188 governor: 5 h 2 min
Off course if the display is off, it is easy to choose, because there is no need for performance.
I set up Conservative 192/810, but any similar can work.
I choose Ondemand, and using "Tasker" to switch to Performance, if certain applications are active,
like Doodle Jump - which run a little smoother with the Performance, for as an example.
thanks for the info...
nice, thanks
Thanks, cleared my doubts.
completely noob question, how do u choose between governors? set cpu from the market its a paid app, and the one i downloades from the official post wont work
i have a galaxy s2 with Touch X-POWER+ 2.1 [XXKI3] rom
Interactive - Instead of sampling the cpu at a specified rate, the governor will scale the cpu frequency up when coming out of idle. When the cpu comes out of idle, a timer is configured to fire within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer fires then we assume the cpu is underpowered and ramp to MAX speed.
Smartass- Is an improved version of interactive governor
Ondemand – Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see “up threshold” in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
Conservative– Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
Performance – Available in most kernels. It will keep the CPU running at the “max” set value at all times. This is a bit more efficient than simply setting “max” and “min” to the same value and using ondemand because the system will not waste resources scanning for CPU load.
Powersave – Available in some kernels. It will keep the CPU running at the “min” set value at all times.
Userspace– A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor.
Hope those will able to help newbies to SetCPU or No Frills CPU.
Credit to LeeDroid for the infos
I believe Interactive is the most responsive kernel out there. Faster than ondemand. So it'll technically use more power when you are using the phone.
HOWEVER, isn't the best feature of Smartass the ability to cap frequencies when the screen is OFF? This essentially negates the need for using SetCPU to limit frequenceis when screen is off. Yes it's an improved version of interactive, but it should be just as responsive, but with these set limits in. I'm just not sure what the specific rules are. I used it for my Moto Milestone, but I'm unsure of what the rules are here.
window7 said:
Interactive - Instead of sampling the cpu at a specified rate, the governor will scale the cpu frequency up when coming out of idle. When the cpu comes out of idle, a timer is configured to fire within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer fires then we assume the cpu is underpowered and ramp to MAX speed.
Smartass - Is an improved version of interactive governor
Ondemand – Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see “up threshold” in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
Conservative – Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
Performance – Available in most kernels. It will keep the CPU running at the “max” set value at all times. This is a bit more efficient than simply setting “max” and “min” to the same value and using ondemand because the system will not waste resources scanning for CPU load.
Powersave – Available in some kernels. It will keep the CPU running at the “min” set value at all times.
Userspace – A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor.
Hope those will able to help newbies to SetCPU or No Frills CPU.
And do correct me if I am wrong. Thank you
Click to expand...
Click to collapse
You should credit the source you copy and pasted that from. Or even better post the link.
Sent from my Nexus S using XDA App
dmo580 said:
I believe Interactive is the most responsive kernel out there. Faster than ondemand. So it'll technically use more power when you are using the phone.
HOWEVER, isn't the best feature of Smartass the ability to cap frequencies when the screen is OFF? This essentially negates the need for using SetCPU to limit frequenceis when screen is off. Yes it's an improved version of interactive, but it should be just as responsive, but with these set limits in. I'm just not sure what the specific rules are. I used it for my Moto Milestone, but I'm unsure of what the rules are here.
Click to expand...
Click to collapse
SMARTASS is a rewrite of the INTERACTIVE governor, and it moves the CPU up/down depending on whether the phone is idle/locked/ ... etc.
But some problems that I experience with SMARTASS is that my music playback sometimes stutters(?). So I'm just sticking with INTERACTIVE.
http://setcpu.com
edit:/#7 didnt seem to work right?
matt2053 said:
You should credit the source you copy and pasted that from. Or even better post the link.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Thanks for telling me that. I had changed it
However, I cant post the link as I cannot find the source I find it.
I only know that LeeDroid provided me the details
window7 said:
Thanks for telling me that. I had changed it
However, I cant post the link as I cannot find the source I find it.
I only know that LeeDroid provided me the details
Click to expand...
Click to collapse
I believe it comes from SetCPU's website.
Http://www.setcpu.com
Sent from my Nexus S using XDA App
olorin86 said:
SMARTASS is a rewrite of the INTERACTIVE governor, and it moves the CPU up/down depending on whether the phone is idle/locked/ ... etc.
But some problems that I experience with SMARTASS is that my music playback sometimes stutters(?). So I'm just sticking with INTERACTIVE.
Click to expand...
Click to collapse
Is this because your screen is off? Yeah, smartass has some issues when the screen is off. Main issue is wakeup and whatever else your phone has to do. I know the Netarchy kernel with smartass just got a revision lately to deal with more wake issues.
But in terms of when your screen is on smartass should function exactly like interactive. So that's why I said smartass is essentially interactive, but with those preset rules regarding screen off that you would otherwise have to create using SetCPU.
The reason you might have worse battery might be because during screen off, your phone is struggling to do work at a slower pace (ideally you shouldn't have to do much, but maybe some people's phones have a lot of stuff running in the background), and so the more time you spent with the CPU active ends up eating more power.
This is one of the arguments about Intel Atom vs. Intel i3. Both idle at the same wattage, but the i3 uses massively more power in load. Probably 2x-3x more. However, given that the i3 is like so FAST, it gets say an encoding job done in like 1/4 the time. Your overall power (Watts * time) used is actually less with the faster CPU. This might apply with the Smartass governor. If your CPU is struggling and maxing out at its cap for a long time because its not fast enough when the screen is off, then perhaps this can be an issue. Just a thought. This is why I think the max_freq for sleep should probably be set around 500-600mhz instead of like 200mhz.
But once again I'm not sure what the governor is set at right now. If someone knows, please do tel
Right i am not going to bore you with long ass intros or long essays on how to do this and how to do that. All i did was share my results on a thread and people started messaging me about my settings and what configurations i use. So i will make it all simple for you. I am opening a thread so you can see what settings i am using and use it as a guide and adjust them or use my own settings if you want to get the best out of your battery and enjoy more your baby. Plus this thread is for you guys to stop private messaging me as i am getting loads of messages and hardly have time to reply to you all.
First off and call it a disclaimer if you want, what WORKS on my phone might not work for yours. So as i said above, use my settings if you want, but if you have problems then tweak them to an effect your phone runs smoothly. Infact with my settings you get the balance of both worlds, Performance and battery life. But let me say this i am just providing you guys with my settings and what works for me. Now if you get any problems or errors which you should not do not come here crying as i have not forced these settings on anyone. The below settings are for people like myself who do not know how to use a script to tweak a governor, and by having this app makes life a lot easier and by me helping with my settings i hope it can provide the balance of good battery life and performance to people.
I know Geko95gek has his MagicConfig thread and my thread is different to his, as my thread is just to help people with the Lulzactive app settings and give them a guide on how to start and use it and how to get the best out off it. His is more to do with voltages of cpu and GPU. You can use his MagicConfig and use my Lulzactive apps settings if you want. Big shout out to him for his magic.
Please also follow the bottom link for a bit more in depth info on a How to guide for undervolting.(many thanks to Eric-filth)
http://forum.xda-developers.com/showthread.php?t=1532999
Anyway here are the settings that i use and please use as a guide:
Lulzactive app Settings:
inc_cpu_load: 75%
pump_up_step: 3
pump_down_step:2
screen_off_min_step: 4,@200MHz
up_sample_time: 50000
down_sample_time: 30000
debug_mode: 0
Setting up your Lulzactive app with your configurations:
To be able to use the above settings as already stated you need the Lulzactive application were it can be found here:https://play.google.com/store/apps/details?id=com.tegrak.lulzactive&hl=en.
Once you have installed it then you need to have Voltage Control which i recommend or any other cpu tuner program installed on your phone like(SetCpu, NoFrills, Tegrak OC) to be able to set lulzactive governor as default.
Once you have done that then go ahead and input my settings or your own. The exact way i have it laid out, is the same on the app.
Once you have done inputting the settings always make sure you have SET ON BOOT ticked.
Come out of the app and reboot. Wait for the phone to load up properly then go back into the application to make sure the settings have been set up properly and stayed. And that is it. :
Voltage Control Configuration:
*Governor: Lulzactive (of course)
*Scheduler: VR - Noop
Voltages
1200Mhz - 1150mV
1000Mhz - 1050mV
800Mhz - 1000mV
500Mhz - 950mV
200Mhz - 900mV
100Mhz - 850mV
GPU ControlLow power state - High power estate114Mhz - 950mV / 267Mhz - 1050mV
Now i will present to you settings that you can use with a different governor and scheduler. Call this Rock Solid Config v1.1 if you like.
Voltages
1200Mhz - 1175mV
1000Mhz - 1100mV
800Mhz - 975mV
500Mhz - 950mV
200Mhz - 850mV
100Mhz - 850mV
GPU Control:Low Power state: 133Mhz - 900mV
High Power State: 267Mhz - 1000mv
Scheduler: Noop
Governor: Conservative
Misc Tweaks: Ext4 Boost- Sched_Mc
So there you have it. Those are my settings that i use currently with NEAK kernel and work like a charm for me. Feel free to use my configuration if you like but please consider that everyones phone is different. So feel free to use mine as a guide and either feel free to undervolt more if you like or if you find that you are getting freezes then up the steps by either 25mV or 50mv
Feel free to post your results here as i would like to know if my settings work or not and also your battery results to show if my settings actually do something towards your battery.
Just a few thanks in order as well i think:
Simone201: for his awesome kernel and configurator.
Tegrak: For his awesome lulzactive app(makes my life alot easier to tweak it this way instead of scripts)
Gokhanmoral: just for his siyah kernel and i have all the time in the world for that guy as he is a legend in my eyes
Geko95gek: for being just a crazy ass Yoda and providing everyone with his MagicConfig
GC and LeoMar75: For the awesome rom
So_ony: cause i have to say it was her idea behind this brainchild of a thread.
Droidphile: For his awesome thread regarding all the information you need regarding kernels
And to you all who keep pestering me for my settings this thread is for you guys.
Information on misc tweaks, plus my favorite governors and schedulers i recommend
Abit more info regarding what are the misc options in the NEAK configurator application. (Many thanks to Droidphile for all the information)
Q. "What are these modes: IDLE, LPA and AFTR?"
A. Between screen off and deep sleep states, there are some idle modes supported by cpuidle driver. They are IDLE aka Normal Idle, LPA aka Deep Idle and AFTR aka ARM Off Top Running. Race to idle by CPU is implemented for power management.
In IDLE state, CPU is not clocked anymore, but no hardware is powered down.
In deep idle (LPA),a state after IDLE, again, the cpu is not clocked anymore like we guessed but some parts of hardware are powered down. Deep idle brings in real power savings and there is no need of putting a hard limit to frequency during screen-off; using a screen-off profile. (Good practice is to use a governor with built in screen off profile, than using an user-configured screen-off profile by putting a hard limit on frequency). Deep idle is not used when device is entering deep sleep and also when device is woken from suspend/deep sleep. While entering/exiting DEEP IDLE, CPU is set statically to SLEEP_FREQ and is not clocked below or above until it exits this state.
AFTR is a patch to support Top=Off mode for deep idle. Level 2 cache keeps it data during this mode.
We can have IDLE or AFTR modes with LPA enabled or disabled. (Obviously it is not possible to have IDLE and AFTR together)
Values:
0: IDLE
1: AFTR
2: IDLE+LPA
3: AFTR+LPA
Q. "What idle modes are recommended for power saving? How do i change it"?
A. Recommended for power saving is to enable AFTR and LPA, ie value 3
Example:
echo "3" > /sys/module/cpuidle/parameters/enable_mask
Q. "What is sched_mc?"
A. Linaro team invented sched_mc or Schedule Multi Core to make process scheduling multi-core aware. ie, utilize both cores wisely to save power and balance performance. Even though sched_mc is sort of an alternative to cpu hot plugging, we can use sched_mc with the default hot plug mode.
Possible Values:
0 : No power saving load balance, default in our exynos4210 Soc.
1 : Fill one thread/core/package first for long running threads. In our single-CPU dual-core device, multithreading does not come into picture, so load balancing is almost redundant to hotplugging.
2 : Also bias task wake-ups to semi-idle CPU package for power savings. (Bias new tasks to cpu1 if cpu0 is mostly filled with running tasks). This is 'overloading' CPU0 first.
Q. "What value is recommended for sched_mc?"
A. 1) If you find advantages to sched_mc, use sched_mc=1 for a possible battery saving. Anyhow since load-balancing is reduntant on hotplugging, it may not have any advantage on exynos chip.
2) For performance use 2. But do remember that loading CPU0 and leaving CPU1 can not do justice to hitting deep idle states sooner since second core can not enter deep idle. So extra performance or no performance, value 2 will drain some more battery, in the context of delayed didle.
3) To do justice to hotplugging, use value 0.
Example:
echo "0" /sys/devices/system/cpu/sched_mc_power_savings.
Schedulers that i recommend to use. Again massive thanks to Droidphile for the information.
Noop
Inserts all the incoming I/O requests to a First In First Out queue and implements request merging. Best used with storage devices that does not depend on mechanical movement to access data (yes, like our flash drives). Advantage here is that flash drives does not require reordering of multiple I/O requests unlike in normal hard drives.
Advantages:
Serves I/O requests with least number of cpu cycles. (Battery friendly?)
Best for flash drives since there is no seeking penalty.
Good throughput on db systems.
Disadvantages:
Reduction in number of cpu cycles used is proportional to drop in performance.
V(R)
Unlike other schedulers, synchronous and asynchronous requests are not treated separately, instead a deadline is imposed for fairness. The next request to be served is based on it's distance from last request.
Advantages:
May be best for benchmarking because at the peak of it's 'form' VR performs best.
Disadvantages:
Performance fluctuation results in below-average performance at times.
Least reliable/most unstable.
Governors that i recommend to use. Information again by Droidphile.
Lulzactive:
This new find from Tegrak is based on Interactive & Smartass governors and is one of the favorites.
Old Version: When workload is greater than or equal to 60%, the governor scales up CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step. When screen is off, frequency is locked to global scaling minimum frequency.
New Version: Three more user configurable parameters: inc_cpu_load, pump_up_step, pump_down_step. Unlike older version, this one gives more control for the user. We can set the threshold at which governor decides to scale up/down. We can also set number of frequency steps to be skipped while polling up and down.
When workload greater than or equal to inc_cpu_load, governor scales CPU pump_up_step steps up. When workload is less than inc_cpu_load, governor scales CPU down pump_down_step steps down.
Example:
Consider
inc_cpu_load=70
pump_up_step=2
pump_down_step=1
If current frequency=200, Every up_sampling_time Us if cpu load >= 70%, cpu is scaled up 2 steps - to 800.
If current frequency =1200, Every down_sampling_time Us if cpu load < 70%, cpu is scaled down 1 step - to 1000.
Conservative:
A slower Ondemand which scales up slowly to save battery. The conservative governor is based on the ondemand governor. It functions like the Ondemand governor by dynamically adjusting frequencies based on processor utilization. However, the conservative governor increases and decreases CPU speed more gradually. Simply put, this governor increases the frequency step by step on CPU load and jumps to lowest frequency on CPU idle. Conservative governor aims to dynamically adjust the CPU frequency to current utilization, without jumping to max frequency. The sampling_down_factor value acts as a negative multiplier of sampling_rate to reduce the frequency that the scheduler samples the CPU utilization. For example, if sampling_rate equal to 20,000 and sampling_down_factor is 2, the governor samples the CPU utilization every 40,000 microseconds.
Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source. Tweaks comes from 1) Knzo 2) Morfic. The original idea comes from Netarchy. See here. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.
Do not forget to enable the Lionheart tweaks you must have Conservative governor enabled through the configurator application and then select Lionheart tweaks
Links
*N.E.A.K kernel:
http://forum.xda-developers.com/showthread.php?t=1411788
*Droidphile thread regarding more info about governors and schedulers and more tweaks
http://forum.xda-developers.com/showthread.php?t=1369817
*Ext4 Optimization information
http://kernelnewbies.org/Ext4
*N.E.A.K Configurator App.
https://play.google.com/store/apps/details?id=com.neak.NEAK_Configurator
*If you want to try alternative settings from mine and try settings near stock default go to the following thread by Geko95gek and check his great thread out.
http://forum.xda-developers.com/showthread.php?t=1466017
And your voltage conttol settings??
Tapatalk on SGSII (Powered by CheckROM RevoHD V6, SiyahKernel 2.6.12 + MagicConfig 0.3.1, Modem KI4)
edwardeutsch said:
And your voltage conttol settings??
Tapatalk on SGSII (Powered by CheckROM RevoHD V6, SiyahKernel 2.6.12 + MagicConfig 0.3.1, Modem KI4)
Click to expand...
Click to collapse
start with the MagicConfig mate. That should be good enough.
Great thread to start tweaking with Lulzactive governor. Should make life easier for a lot of people, gives them the opportunity to gain extra battery juice without too many headaches.
geko95gek said:
Great thread to start tweaking with Lulzactive governor. Should make life easier for a lot of people, gives them the opportunity to gain extra battery juice without too many headaches.
Click to expand...
Click to collapse
Thanks mate. And with your magic config people can have the best of both worlds. Shame we can't merge the two...Anyway thanks mate much appreciated for your kind words
Why pump up 4 steps? For performance or? The rest of the settings i can see the meaning in, but why pump up four steps?
Else, awesome thread! God starting point for many!
Pennywice said:
Why pump up 4 steps? For performance or? The rest of the settings i can see the meaning in, but why pump up four steps?
Else, awesome thread! God starting point for many!
Click to expand...
Click to collapse
Thanks mate...For performance yes but also if you see the other settings you will see they are leaning more towards the battery side. Hence why i wanted to go for a balance between the two if that makes sense. I will be trying different settings and i will provide screenshots of my results and will provide the settings for each result i do.
Stifler69 said:
Thanks mate. And with your magic config people can have the best of both worlds. Shame we can't merge the two...Anyway thanks mate much appreciated for your kind words
Click to expand...
Click to collapse
i see you have listen to me and you have opened a new thread nice mate
so_ony said:
i see you have listen to me and you have opened a new thread nice mate
Click to expand...
Click to collapse
check OP
Stifler69 said:
check OP
Click to expand...
Click to collapse
oh how cute thanks hehe =) geko didn't answer my email :/
your description is short but everything is described very well !
so_ony said:
oh how cute thanks hehe =) geko didn't answer my email :/
your description is short but everything is described very well !
Click to expand...
Click to collapse
any ideas on how to get this thread going please let me know..and glad you liked my OP
so_ony said:
oh how cute thanks hehe =) geko didn't answer my email :/
Click to expand...
Click to collapse
So sorry for the delay. Please feel free to punish me.
I want understand one thing sorry my noobless.
What magic have in magicConfig from geko?
Enviado do meu nokia 3320 modificado por laboratório usando Tapatalk
great...now something to use when im on check and neak...nice work stiffy!!!
Good work Stifler, im trying your magic configuration and it Owns..!! Just right now im experiencing a little more battery drain against just the +conservative+lionheart+ext4+AFTR config.
Ill give it some days with full charge and check.
Stifler69 said:
Anyway here are the settings that i use and use as a guide:
Lulzactive app Settings:
inc_cpu_load: 95%
pump_up_step: 4
pump_down_step:1
screen_off_min_step: 4,@200MHz
up_sample_time: 20000
down_sample_time: 40000
debug_mode: 0
Click to expand...
Click to collapse
Out of curiosity what are the default Lulzactive settings on NEAK 1.4 compared to those above???
Those lulzactive setting seem to be replicated from ThunderBolt! ain't it. Down to the last setting :/
pikachu01 said:
Those lulzactive setting seem to be replicated from ThunderBolt! ain't it. Down to the last setting :/
Click to expand...
Click to collapse
Hey mate. Actually I have never seen you around on any posts sharing these settings or even opened thunderbolt scripts to see how you tweak lulz governor. I have nothing but for respect for you Pika as I see how great you thread is and how popular your scripts are. These settings that I am using are a start up from me from playing around with the app and sharing my findings with friends. If it brings offence to you I will bring it down. But I swear to you I have never used your scripts as one I do not how to use them and two I prefer apps to do the work for me as I hate to many scripts in my phone. I would love your help here if possible on what to help people though
eric-filth said:
I want understand one thing sorry my noobless.
What magic have in magicConfig from geko?
Enviado do meu nokia 3320 modificado por laboratório usando Tapatalk
Click to expand...
Click to collapse
well just take a look at his thread my friend. his voltage control settings are shared nearly by 700 users on xda and have reported nothing but good stuff from it. i do not want to share my settings as i Undervolt quite heavy so my settings would not work with most on here. so i used his thread for people who would ask for settings apart from my lulz app ones.
jermitano said:
great...now something to use when im on check and neak...nice work stiffy!!!
Click to expand...
Click to collapse
Thanks mate. first post settings are just a start up. i will be trying different settings with different kernels and still use Lulzactive as i want to show people my results and they can choose what settings to go for. i will always post a little review as well so users can decide which one to go for.
Honchay said:
Good work Stifler, im trying your magic configuration and it Owns..!! Just right now im experiencing a little more battery drain against just the +conservative+lionheart+ext4+AFTR config.
Ill give it some days with full charge and check.
Click to expand...
Click to collapse
You would get a bit of drain my friend but again it is all about how you have your phone setup and what settings in VC you are using. but hope the settings have some benefit for you though
kersey said:
Out of curiosity what are the default Lulzactive settings on NEAK 1.4 compared to those above???
Click to expand...
Click to collapse
not sure mate.
Guys, i need your opinions -
How do u think - what is the best CPU governor for maximum battery life ?
The possibilities are in the poll.
Keep in mind, that different cpu governors have different modes, so it will be advisable not only to vote for your favourite, but also to mention in the topic your prefered profile for the respective governor...
The mods for the poll are taken from arter97kernel...
that's how I use when I need that the battery lasts longer and gives me results.
sometimes even put the processor speed to 1000MHz .
It gets a little slow but it can handle
I forgot screen cpu but I have at 1400MHz and undervolt light
Hey ^^
well i prefer zzmoove with the zzmoove battery yank profile on Boeffla kernel 2.8 for Slimkat (check my Profile for more Infos: Link). It runs smooth, gives me more then enough Performance and also good Battery Saving. It also features a frequency lock when turning off the Screen and limits the max Freq to 600 mhz which is perfect if you want to run downloads or something similar without problems in the background and your screen is off, but also gives you good powersaving. Unfortunately if you hear Music it can stutter in zzmoove because of the Hotplugging functionality even when the screen is off. To solve this problem you have to turn off the Hotplugging Functionality at Screen off (i read that somewhere, but forgot where).
greetings kaz
gsms said:
Guys, i need your opinions -
How do u think - what is the best CPU governor for maximum battery life ?
The possibilities are in the poll.
Keep in mind, that different cpu governors have different modes, so it will be advisable not only to vote for your favourite, but also to mention in the topic your prefered profile for the respective governor...
The mods for the poll are taken from arter97kernel...
Click to expand...
Click to collapse
I use S5 Sensation in my I9300 and the battery life is the better I have in my phone. The governor used by default is pegasusq.