Since so many people have asked if they can go back to 4.2.2 from using my 4.4.2 update thread :
http://forum.xda-developers.com/showthread.php?t=2692505
YES YES YES you CAN go back to STOCK 100%, the day it came out of the box 4.2.2 if you try out the 4.4.2 update I shared.
This is the Official direct from LG update/return to stock you'll be doing.
Heres how:
Make sure your usb drivers are installed.
Make sure you backup EVERYTHING you want to keep as this will wipe your LG G Pad V500 completely.
Now
Make sure your G Pad is ON, and plugged into your PC and It is plugged in with LG Software mode **NOT connected in "charge tablet" or "Media sync (MTP)".
This will ONLY work in LG Software mode.
Download this:
http://www.androidfilehost.com/?fid=23329332407582419
Install it and right click on it and Run As Administrator, just to be safe.
Open it and once you get to the screen click OK at the bottom...
The next screen will say "Your device has the latest software available..."
Ignore this.
Click on OPTIONS in the top right...select "Upgrade Recovery" give a few seconds to load and it's going to do it's thing
--It's going to ask you for 2 things: 1st line "LG V500" or "LGV500" or "V500" I believe I used "LGV500" and the 2nd line goes your serial number to your LG G Pad, it's on your box, OR the sticker on the back at the bottom of your tablet or I am sure there is an app or another way to get that for you, I have my box.
Now just sit and let it do it's thing and it will flash and "update" your LG G Pad V500 back to 4.2.2 stock, with the stock 4.2.2 bootloader.
You can root, use the Loki exploit, add recovery or whatever your heart desires.
((NOW GO CHECK OUT THE 4.4.2 update I posted and see for yourself if the 4.4.2 update was worth the wait, since you now know you can indeed go back to stock 4.2.2 so easily))
****IF you are stuck in an LG logo bootloop, do the following:
--HOLD the power button for up to 30 seconds until your tablet is OFF completely.
Now press and hold the power & volume down button
As soon as the LG logo shows up, release the power button ONLY, keep holding Volume Down.
While holding Volume down press and hold the Power Button & Volume UP.
You should be now holding all 3 buttons.
The Factory Reset Screen should appear, now let go of the buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset and press power a 3rd time.
Voila.
You're back to stock 4.2.2 100% and YES you can use the Loki exploit again! As this does go back to the 4.2.2 bootloader
GO ROOT and do your thing.
I used this method when I originally downgraded from the leak. The problem here that I've been asking all over the place is where is the file stored that is downloaded? This method will become obsolete without it because this tool will just download the kk update when it's released. The tool downloads and flashes the 'latest' firmware.
I've looked everywhere on my computer looking for the 1.5gb file that this tool downloads (currently 4.2.2) and I just can't find it....
Sent from my LG-V500 using Tapatalk
annoyingduck said:
I used this method when I originally downgraded from the leak. The problem here that I've been asking all over the place is where is the file stored that is downloaded? This method will become obsolete without it because this tool will just download the kk update when it's released. The tool downloads and flashes the 'latest' firmware.
I've looked everywhere on my computer looking for the 1.5gb file that this tool downloads (currently 4.2.2) and I just can't find it....
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
C:\ProgramData\LGMOBILEAX\Phone
id10terror said:
C:\ProgramData\LGMOBILEAX\Phone
Click to expand...
Click to collapse
It's empty...I honestly wonder if the tool deletes the file after flashing.
-VZW LG G2 VS980
annoyingduck said:
It's empty...I honestly wonder if the tool deletes the file after flashing.
-VZW LG G2 VS980
Click to expand...
Click to collapse
Yup the tool deletes it after. You have to copy it out before the tool competes flashing.
Sent from my VS980 4G using Tapatalk
id10terror said:
Yup the tool deletes it after. You have to copy it out before the tool competes flashing.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Ok. So right after the dl while it's flashing, navigate there & copy it? Think there is a way to then use the file later with the same tool even though it's not auto downloading it?
-VZW LG G2 VS980
For the Model, use LG-V500
For french guys :
Fonctions supplémentaires
Installer une mise à jour après erreur
It doesn't work for me.
Step 1 : check OK
Step 2 : download OK
Step 3 : install NOK
I'll try again
Second time, it's work.
After restore, I've bootloop, I've made a factory reset and it's OK
I am an the "ugrading your phone" screen
"S/W Upgrade is in progress"
but nothing happens.... 4%
edit: "upgrade stopped due an error"
I'm still on 4.4.2...
marcelus said:
I'm still on 4.4.2...
Click to expand...
Click to collapse
It's doing the same for me
As predicted, this doesn't work anymore since it's downloading and re flashing KitKat. Is there a work-arround to stop it from downloading and feed it the 4.2.2. flash file?
I want to revert back to 4.2.2 but the guides i've seen so far seem complicated. This one is simple but don't work anymore.
Yes, it is possible. I did it two days ago following an italian guide, through google translate. I would post the link but unfortunatelly I'm not allowed, having less than 10 posts.
But answer me this: why do you wanna go back to 4.2.2? The reason I'm asking is because, after I downgraded and tried various ROMs, I reverted back to KitKat in a matter of hours.
ruxandy said:
Yes, it is possible. I did it two days ago following an italian guide, through google translate. I would post the link but unfortunatelly I'm not allowed, having less than 10 posts.
But answer me this: why do you wanna go back to 4.2.2? The reason I'm asking is because, after I downgraded and tried various ROMs, I reverted back to KitKat in a matter of hours.
Click to expand...
Click to collapse
this is required so one can retain loki and custom recovery patched in the latest bootloader , so the ideal way would be to
1. get to 4.2.2
2. Root
3. TWRP recovery
4. Flash 4.4.2 official zip via recovery thus retaining recovery and the loki exploit
You can also use the loki exploit, obtain root and then flash a custom recovery AFTER upgrading to 4.4.2. I know this because I did it.
I also tried it running official 4.4.2 but it seems like since there is 4.4.2 officially available it just reflashes the same system.
LINK TO UPDATED PROCEDURE:
Since LG has put the 4.4.2 image on their servers, factory restore now gets you a version without the exploits required to flash a custom recovery. The procedure in post #1 no longer reverts to 4.2.2.
Fortunately, there is another thread that discusses a workaround to this. If you need to flash a 4.4.2 device back to 4.2.2 so you can flash a custom recovery (and in order to have access to third-party ROMs), please see this post:
http://forum.xda-developers.com/showpost.php?p=53140473&postcount=14
I hope this helps.
After updating my g pad to 4.4.2 the front camera stopped working. Android can't recognize it anymore so I'am downgrading to 4.2.2
Can't root!
Hello everyone,
I just got the LG G Pad 8.3 couple weeks ago. I've never been able to own an Android device that I didn't flash a custom rom on. I am currently trying to root this tablet, however, cannot do it for the life of me!
I've tried several guides on XDA but always end up with it not working. First issue I'm dealing with is that I cannot boot into the stock recovery. My recovery doesn't have the option to load from ADB. So, that's out of the question.
Following the guide within this thread leads me to the fact that I cannot go into "Software Mode"!!!
Please help me!
The specs on this tablet are the following:
Model number: CK810 4G :cyclops:
Android Version: 4.4.2
Software Version: VK81022B
Kernel version: 3.4.0
I cant open b2capp - it's showing- check your internet connection. But I'm all the time on wifi, I hv no idea what's happend.
SQ9KFX said:
I cant open b2capp - it's showing- check your internet connection. But I'm all the time on wifi, I hv no idea what's happend.
Click to expand...
Click to collapse
For those looking for 4.2.2 or flashing their own KDZ. this has worked for me also as suggested here:
http://forum.xda-developers.com/showpost.php?p=55415374&postcount=8
The LG Flash Tool 2014 is a modified flash tool that simply works without connecting to the network or utilize LG's Mobile Support:
http://forum.xda-developers.com/showthread.php?t=2797190
1. Download LG Flash Tool 2014 and LG Drivers
2. Put the KDZ you desire.
3. Set "Select Type" to CDMA (I think it doesn't really matter)
3. Set Phone Mode to: EMERGENCY
4. Click CSE Flash for complete wipe or Normal Mode. (I choose CSE but haven't tested Normal Mode)
5. Click the "START" Button on next screen.
6. Press "OK" (I've also choose English as language)
Related
Long story short, I deleted my backup rom (Don't ask Please cause I already know)
I am running TWRP 2.6.3.2 and it does NOT let me install any rom (4.3 or 4.4) I constantly get the error (Error executing updater binary in zip) for every rom zip I have downloaded.(AOKP)(PA)(CM 11) etc...
I've tried the Return to stock guide http://forum.xda-developers.com/showthread.php?t=2432476 in General Discussion, and I consistently get stuck @ 49% when restoring the firmware.
I also cannot get the LG Mobile support tool to download a new firmware for the phone itself.
I do have access to sideload via TWRP but it is useless because every rom gives me an error.
Do I have any options left or do I just call it a week and enjoy my $600 paper weight?
Please any help would be much appreciated!
LG G2 for T-Mobile (D801)
Esteef said:
Long story short, I deleted my backup rom (Don't ask Please cause I already know)
I am running TWRP 2.6.3.2 and it does NOT let me install any rom (4.3 or 4.4) I constantly get the error (Error executing updater binary in zip) for every rom zip I have downloaded.(AOKP)(PA)(CM 11) etc...
I've tried the Return to stock guide http://forum.xda-developers.com/showthread.php?t=2432476 in General Discussion, and I consistently get stuck @ 49% when restoring the firmware.
I also cannot get the LG Mobile support tool to download a new firmware for the phone itself.
I do have access to sideload via TWRP but it is useless because every rom gives me an error.
Do I have any options left or do I just call it a week and enjoy my $600 paper weight?
Please any help would be much appreciated!
LG G2 for T-Mobile (D801)
Click to expand...
Click to collapse
You sure? I just did it successfully. Did you download the correct firmware?
back too stock
Il always yuse lg mobile support. Il start by geting lg g2 ind download mode, power and vol +
When my phone is ind download mode i conect it too the computer and start the lg mobile support
Press options and upgrade it works for me
Esteef said:
Long story short, I deleted my backup rom (Don't ask Please cause I already know)
I am running TWRP 2.6.3.2 and it does NOT let me install any rom (4.3 or 4.4) I constantly get the error (Error executing updater binary in zip) for every rom zip I have downloaded.(AOKP)(PA)(CM 11) etc...
I've tried the Return to stock guide http://forum.xda-developers.com/showthread.php?t=2432476 in General Discussion, and I consistently get stuck @ 49% when restoring the firmware.
I also cannot get the LG Mobile support tool to download a new firmware for the phone itself.
I do have access to sideload via TWRP but it is useless because every rom gives me an error.
Do I have any options left or do I just call it a week and enjoy my $600 paper weight?
Please any help would be much appreciated!
LG G2 for T-Mobile (D801)
Click to expand...
Click to collapse
Can you get into download mode? If so, the LG Mobile Launcher should work. Make sure you have the latest drivers downloaded from LG. It should also be in the thread about using the Mobile Launcher. I couldn't get it to work at first because I didn't install the latest drivers. Just plugging in the phone to your PC won't do it. Also, if you do get it to work, the firmware that will be installed will be d80110g, not d80110c that came with the phone. There is no info about this version other than the thread I started about it. Code Hustler tweaked ioroot to root this version and it is in the thread. Just search "T-Mobile software update" in the general section if you do get it installed. Good luck!
Sideload the latest twrp recovery and then pick your rom and retry make sure you are correctly wipeing systen dalvik and chache
tumebone said:
Il always yuse lg mobile support. Il start by geting lg g2 ind download mode, power and vol +
When my phone is ind download mode i conect it too the computer and start the lg mobile support
Press options and upgrade it works for me
Click to expand...
Click to collapse
Whenever I try to use the upgrade, it never even asks me for my IMEI , it says stuck displaying: Downloading software, but it never downloads anything. It could be a driver issue. There is just so many links on here maybe I really haven't installed the correct drivers??
Any links to drivers that works would be very nice if possible!
Howie Dub said:
Can you get into download mode? If so, the LG Mobile Launcher should work. Make sure you have the latest drivers downloaded from LG. It should also be in the thread about using the Mobile Launcher. I couldn't get it to work at first because I didn't install the latest drivers. Just plugging in the phone to your PC won't do it. Also, if you do get it to work, the firmware that will be installed will be d80110g, not d80110c that came with the phone. There is no info about this version other than the thread I started about it. Code Hustler tweaked ioroot to root this version and it is in the thread. Just search "T-Mobile software update" in the general section if you do get it installed. Good luck!
Click to expand...
Click to collapse
Where did you get the latest drivers from?? Maybe I don't have the "Latest Drivers".
Where did you get the latest drivers from?? Maybe I don't have the "Latest Drivers". [/QUOTE]
I cant post outside links, but go to google and search d801 usb driver and download it from lg site
Try install and tell me if it solved your problem.. Otherwise ill help you getting it solved.
ill keep an eye on this post..
Problem Resolved / My Solution
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers.
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Well, good to hear that your phone works again... I see CM nightly has some TWRP install script in lastest build, and a TWRP version for CM 10.2 and CM11...
http://forum.xda-developers.com/showthread.php?t=2553199
But take your time to read through topic..
owner lg g2-d802
Hey guys,
a while ago i rooted my d802 and flashed some roms and my experience was that my batterlife was worsen. So i tried to flash official kdz firmware in order to unroot my phone.
What i did was verry simple, flash the kdz and factory reset the whole device. But then i went back to download mode to see if i still had root. to my suprise it showd this (kdz 220b, userB99- rooted)
my question is why is it still rooted ?
abati said:
owner lg g2-d802
Hey guys,
a while ago i rooted my d802 and flashed some roms and my experience was that my batterlife was worsen. So i tried to flash official kdz firmware in order to unroot my phone.
What i did was verry simple, flash the kdz and factory reset the whole device. But then i went back to download mode to see if i still had root. to my suprise it showd this (kdz 220b, userB99- rooted)
my question is why is it still rooted ?
Click to expand...
Click to collapse
Use official LG KDZ ROMs and flash with LG Flash Tools 2014 :
http://forum.xda-developers.com/showthread.php?t=2797190
Flash mode: CSE flash
and dont forget to backup your sd card files. All will be wiped in this mode.
Official ROMs:
http://lg-firmware-rom.com
abati said:
owner lg g2-d802
Hey guys,
a while ago i rooted my d802 and flashed some roms and my experience was that my batterlife was worsen. So i tried to flash official kdz firmware in order to unroot my phone.
What i did was verry simple, flash the kdz and factory reset the whole device. But then i went back to download mode to see if i still had root. to my suprise it showd this (kdz 220b, userB99- rooted)
my question is why is it still rooted ?
Click to expand...
Click to collapse
Don't worry
http://forum.xda-developers.com/showthread.php?t=2703501
thnx i will try that !
Vogie said:
Use official LG KDZ ROMs and flash with LG Flash Tools 2014 :
http://forum.xda-developers.com/showthread.php?t=2797190
Flash mode: CSE flash
and dont forget to backup your sd card files. All will be wiped in this mode.
Official ROMs:
http://lg-firmware-rom.com
Click to expand...
Click to collapse
hey men, i tried exactly what you said, but it stil the same after i flashed the kdz with CSE flash mode.
when i go back to download mode it stil says (user b97 - rooted in) i forgot to say that rooted is in red letters, does that say annything ? i am bit confused
abati said:
hey men, i tried exactly what you said, but it stil the same after i flashed the kdz with CSE flash mode.
when i go back to download mode it stil says (user b97 - rooted in) i forgot to say that rooted is in red letters, does that say annything ? i am bit confused
Click to expand...
Click to collapse
Let me know, did you download KDZ ROM from http://lg-firmware-rom.com ?
You have to enter your IMEI to get you download link. It's a kdz file with around 1.6 Gigabytes.
Right?
Vogie said:
Use official LG KDZ ROMs and flash with LG Flash Tools 2014 :
http://forum.xda-developers.com/showthread.php?t=2797190
Flash mode: CSE flash
and dont forget to backup your sd card files. All will be wiped in this mode.
Official ROMs:
http://lg-firmware-rom.com
Click to expand...
Click to collapse
Vogie said:
Let me know, did you download KDZ ROM from http://lg-firmware-rom.com ?
You have to enter your IMEI to get you download link. It's a kdz file with around 1.6 Gigabytes.
Right?
Click to expand...
Click to collapse
yes that is correct
abati said:
yes that is correct
Click to expand...
Click to collapse
It doesn't make sense!
Stocks KDZ will make your phone like first day and repartition all partitions.
CES mode should works and Its delete all of your files.
BTW, It's just way I know to back to completely stock ROM.
Try again maybe works.
Vogie said:
It doesn't make sense!
Stocks KDZ will make your phone like first day and repartition all partitions.
CES mode should works and Its delete all of your files.
BTW, It's just way I know to back to completely stock ROM.
Try again maybe works.
Click to expand...
Click to collapse
i totally agree with you, but i already tried more then once.
I remeber that around 3 months ago i flashed an official kdz file and i tried to install root and recovery but it kept failing, so i installed an app called autrec and this app fixed everything .
Could this thing cause the problem ?
No, autorec just install recovery.
LG flash tools 2014 flash lg's recovery from KDZ file.
Vogie said:
No, autorec just install recovery.
LG flash tools 2014 flash lg's recovery from KDZ file.
Click to expand...
Click to collapse
i have also to mention, each time i went back to stock kdz i installed root checker, and the app kept saying root is not properly installed blabla, realy weird.
and yes i always used lg flash tools 2014 but nothing changes
abati said:
i have also to mention, each time i went back to stock kdz i installed root checker, and the app kept saying root is not properly installed blabla, realy weird.
and yes i always used lg flash tools 2014 but nothing changes
Click to expand...
Click to collapse
Hello abati.
The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat. You can manually replace some files (rct.config), but even though it shows ROOTED in download mode, it isn't unless you manually rooted it after flashing a kdz.
If you're thinking of sending the phone in for a repair, I recall hearing that it doesn't have any effect at all.
But if it really bothers you that much you can flash a Jelly Bean ROM kdz (4.2.2) and UNROOTED will appear in dowload mode or just replace the files. But it has no practical value since your phone is not rooted.
Hope this helps!
vPro97 said:
Hello abati.
The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat. You can manually replace some files (rct.config), but even though it shows ROOTED in download mode, it isn't unless you manually rooted it after flashing a kdz.
If you're thinking of sending the phone in for a repair, I recall hearing that it doesn't have any effect at all.
But if it really bothers you that much you can flash a Jelly Bean ROM kdz (4.2.2) and UNROOTED will appear in dowload mode or just replace the files. But it has no practical value since your phone is not rooted.
Hope this helps!
Click to expand...
Click to collapse
thnx m8, i was about to flash a jb rom actualy and see if it will change ^^ i will report back
abati said:
thnx m8, i was about to flash a jb rom actualy and see if it will change ^^ i will report back
Click to expand...
Click to collapse
It will change make sure you download and flash the correct model and storage (16 GB or 32 GB).
Also, it's easier to press thanks button than to say thanks - unless you're out of thanks for today, like I am
vPro97 said:
It will change make sure you download and flash the correct model and storage (16 GB or 32 GB).
Also, it's easier to press thanks button than to say thanks - unless you're out of thanks for today, like I am
Click to expand...
Click to collapse
hey m8 what you said is right, i flashed a kdz (D80210A_00) but it acted strangely cuz it kept rebooting and I then shutdown the phone with a combination of the buttons and then powered on but it kept rebooting. eventualy i checked in the download mode and there it said unrooted in white text.
eventualy i went back to kdz (D80220H_00) kitkat rom, and i factory reset everything and downloaded root checker, root checker says LG g2 device is not rooted. But when i went back to download mode and just see what it said ^^
It says rooted men -_- realy disturbing
did LG do this intentialy ? cuz if i am going to send tis device for repair the chance is very high that they will charge me the cost for the repair because my phone shows that i rooted.
how should i deal with this
abati said:
hey m8 what you said is right, i flashed a kdz (D80210A_00) but it acted strangely cuz it kept rebooting and I then shutdown the phone with a combination of the buttons and then powered on but it kept rebooting. eventualy i checked in the download mode and there it said unrooted in white text.
eventualy i went back to kdz (D80220H_00) kitkat rom, and i factory reset everything and downloaded root checker, root checker says LG g2 device is not rooted. But when i went back to download mode and just see what it said ^^
It says rooted men -_- realy disturbing
did LG do this intentialy ? cuz if i am going to send tis device for repair the chance is very high that they will charge me the cost for the repair because my phone shows that i rooted.
how should i deal with this
Click to expand...
Click to collapse
Like vPro97 said, "The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat".
I suggest installing the Stock Jelly Bean .kdz file for your device, and then upgrading to KitKat ONLY via OTA.
d00lz said:
Like vPro97 said, "The "rooted" tag in download mode is an error by LG, when they updated the LG G2 to KitKat".
I suggest installing the Stock Jelly Bean .kdz file for your device, and then upgrading to KitKat ONLY via OTA.
Click to expand...
Click to collapse
But when i flashh jb kdz it keeps rebooting, totally nonsense if you ask me, but when i hold power and volume down for a couple sec. then the phone shuts down, after that i pressed the power butten but it still kept rebooting. I was able to enter the download mode and see for my self that it showed that it was not rooted, but besides that the phone always keeps rebooting.
After I flashed the kdz based on kitkat, i did not had anny problem at all, except that download mode shows that im rooted when in realtime its not.
abati said:
But when i flashh jb kdz it keeps rebooting, totally nonsense if you ask me, but when i hold power and volume down for a couple sec. then the phone shuts down, after that i pressed the power butten but it still kept rebooting. I was able to enter the download mode and see for my self that it showed that it was not rooted, but besides that the phone always keeps rebooting.
After I flashed the kdz based on kitkat, i did not had anny problem at all, except that download mode shows that im rooted when in realtime its not.
Click to expand...
Click to collapse
Hello again. Sorry for the delay, was busy reading!
After flashing a jelly bean KDZ you need to perform a hard reset if it bootloops.
Just press and hold volume down and power button till lg logo pops up, then release the buttons and then immediately press and hold volume down and power button again. Then follow the instructions.
If you flashed the correct file, you'll get an OTA update to kitkat
.
vPro97 said:
Hello again. Sorry for the delay, was busy reading!
After flashing a jelly bean KDZ you need to perform a hard reset if it bootloops.
Just press and hold volume down and power button till lg logo pops up, then release the buttons and then immediately press and hold volume down and power button again. Then follow the instructions.
If you flashed the correct file, you'll get an OTA update to kitkat
.
Click to expand...
Click to collapse
No problem MEN !!
Damnn your a Hero ^^ it worked !!
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Thanks for that muchly dude, hadn't checked that for a while.
Update seems to be stability improvements, power efficiency improvements and some yotamirror and panel improvements and features.
Its not 5.1, but it's an update, I'll take it.
And yeah, super glad moved to the RU ROM. Backing up now, will OTA flash update once that's done. SuperSU has been flashable everytime after an update so far so fingers crossed.
All up and running .
I was rooted, running RU 1.87 with TWRP - phone handled it all just fine - downloaded OTA, pressed install - it went to TWRP > flashed stock recovery back over itself > rebooted and installed.
Phone booted up, all working fine. Lost root - simple reboot and flash the SU.zip had sitting there from the last update. Cache and Dalvik wiped for good measure.
Reboot and all is well and back to normal but with a few improvements, lovely.
About as easy as it's even been done really.
Hope everyone else gets to enjoy the update through similarly smooth procedures .
Yeah, I ended up doing a fresh installation plus rooting, everything smooth. I'm never too sure what an update leaves behind.
It's really a great device, hopefully they'll keep updating things for a while. Of course version 6.0 would be welcomed... Apparently, by the numbering they use, next step would be either 1.2.xx with Android 5.1 or 2.x.xx with 6.0. Let's see.
Fair play, I toyed with idea of it, but was fresh from last install and honestly don't have the time to set everything up again.
My hope is they take all their good ideas from this and can at least join someone else in making a great device.
Saw a working bendy phone the other day, lets you turn pages on reading app by bending corner as you would a book etc. I thought if that could be combined with yota tech, then you have damn near the perfect tablet.
Honestly I don't think we'll get 5.1, let alone 6.0. They're refining their ideas in prep for Yotaphone 3, that and the possible tablet are their main focus right now.
Interestingly, the update flashed it's stock recovery over twrp - someone prepared for the possibility of root owners this time around. So they are still paying attention .
So any idea what's the difference between the EU and the RU rom? I mean there has to be some reason they are two separate roms.
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Jeopardy said:
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Click to expand...
Click to collapse
FYI the difference is essentially the product package configuration (app bundles that are pre-loaded) but there are also some differences between the resources used for the stock apps. One in particular (my personal fav ) is the dialler - the RU variant includes cyrillic characters regardless of language/locale setting (feature). The EU will give you a regular english-only dialler if you're using english locale settings
Vuche said:
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Click to expand...
Click to collapse
Ho to flash the update zip file? I m stuck on 4.4.3...
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Does the new update solve the keyboard sensitivity issue??
zute333 said:
numerous guides and how to's in this forum and across XDA, as well as google.
download fastboot + adb > boot to download mode > flash twrp via fastboot commands > boot into twrp > flash zip.
There's obviously more to it than that, up to you to do the research.
Click to expand...
Click to collapse
i'm using this post as a minimalistic guide for myself (so i keep it up with my "discoveries" )
and ofc for been helped by everyone who wants to help me because i am completely new to android world cause this is my first android phone ever!
so.. let's get started!
i downloaded [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
version 1.4.3 doesnt works for me so i downloaded the 1.3 as suggested and worked.
then i enabled the download mode following the procedure:
Turn off the phone, then press and hold the volume down key + the power key at the same time. This should boot you into download mode.
Click to expand...
Click to collapse
note: phone MUST be disconnected form pc to be turned off.
now..
*does install twrp invalidate warranty?
EDIT: answer is YES cause of
TWRP 2.8.5.0 YotaPhone 2 recovery image said:
Warning: It is currently not known how to re-lock the bootloader. This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem
Click to expand...
Click to collapse
*is installing TWRP a mandatory step?
EDIT: the answer is NO. it seems that the mandatory part is to unlock the bootloader (the bad part for the warranty.. and that can erase ur data..) and this can be done following this guide How to Install TWRP Recovery on YotaPhone 2 untill point 6 included - which i am reporting here for easy of use.
How to Install TWRP Recovery on YotaPhone 2 said:
How to Flash TWRP Recovery on YotaPhone 2
1 - Setup ADB and Fastboot on your Windows PC.
2 - Enable USB debugging from developer options on your YotaPhone 2.
3 - Connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
4 - Go to the folder where you downloaded the TWRP recovery image from the download link above on your PC and open a command window inside that folder by doing “Shift + Right click” on any empty white space inside the folder, then select “Open command window here”.
5 - (Skip this if your bootloader is already unlocked) Now to unlock the bootloader, type in the following command:
└ Beware that unlocking the bootloader may wipe your phone’s data. Make sure to backup first before proceeding.
adb reboot bootloader
Click to expand...
Click to collapse
└ This will reboot your phone to bootloader mode
fastboot oem unlock
Click to expand...
Click to collapse
└ This will unlock bootloader on your device.
6 - Now if your phone has rebooted and is no longer in the bootloader mode, then boot it back into bootloader mode with the “adb reboot bootloader” command.
Click to expand...
Click to collapse
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
error: cannot open 'firmware/emnc_appsboot.mbn'
error: cannot open 'firmware/boot.img'
error: cannot open 'firmware/system.img'
error: cannot open 'firmware/recovery.img'
error: cannot open 'firmware/cache.img'
error: cannot open 'firmware/radio/NON-HLOS.bin'
error: cannot open 'firmware/radio/sbli.mbn'
error: cannot open 'firmware/radio/rpm.mbn'
error: cannot open 'firmware/radio/tz.mbn'
error: cannot open 'firmware/enmc_appsboots.mbn'
Would you like to flash userdata[Y/N]:
Click to expand...
Click to collapse
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Hello guys, I downloaded Lollipop from the ftp but installation fails: no MD5 file found!
I downloaded all russian versions and also the 1.6 EU version... but no way I always get this error.
I'm using TWRP 2.8.5, I guess the last one, and in the tutorials I see this version...
Does anyone know how to solve? :crying:
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
The info is described in various posts across the yotaphone forum. Are you rooted? If not then there also many many guides across the internet for that.
Not walking you through the whole process, sorry. We all had to learn, once you do it's all much easier.
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status
in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Melting Blaze said:
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Click to expand...
Click to collapse
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
TKPL said:
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
Click to expand...
Click to collapse
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
JAMMANDROID said:
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Click to expand...
Click to collapse
yeah. is exactly what i did, but super panicing like a chicken without head
Melting Blaze said:
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
yeah. is exactly what i did, but super panicing like a chicken without head
Click to expand...
Click to collapse
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
Hi, download YotaFlasher, it permits you to download and flash firmwares in an easy way, and you don't need to know any shell command
---------- Post added at 09:37 AM ---------- Previous post was at 09:25 AM ----------
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
TKPL said:
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
Click to expand...
Click to collapse
Hello! I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB :laugh:
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
Click to expand...
Click to collapse
seems that is the same for a lot of people if not everyone..
cause of this problem i am using this app gravity screen on/off.
it halves the problem cause now i have no problem for the amoled. and for problem i mean use the pwer button instead of simply swipe.
for the e-ink panel i still have to use the power button, only way it works.
I have a S4, I337 AT&T device and I think I bricked it by trying to install TWRP, it didn't work... I was trying Muniz_ri's "Update to i337 ok2 5.0.1 and keep root", I couldn't get the Flashfire to load, lots of stuff about rooting and no Supersu something... Any help..?
If you i337 is not on mdl or mdb bootloader you can not install TWRP.
If you phone is brick how could you install the flash fire?
Flashfire works well with stock rom. Are you on custom rom?
In note section of the muniz_is post , the #4 stated that "4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process." . Did you follow that step?
sway8966 said:
If you i337 is not on mdl or mdb bootloader you can not install TWRP.
If you phone is brick how could you install the flash fire?
Flashfire works well with stock rom. Are you on custom rom?
In note section of the muniz_is post , the #4 stated that "4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process." . Did you follow that step?
Click to expand...
Click to collapse
I'm on 5.0.1 Lollipop, the second one From Aug 11 OTA by the seller I bought it from.... I was new to android and didn't know there was a download mode....
The baseband version is: I think it is called I337OCOG0C4... It is the stock rom that came on the phone.... I can't find the stock ROM to redo it( try to at least...) It's on 0C4... I AM rooted , by Kingroot... Verification says so.... Two different versifiers... When I go to flash..., it comes up with that message... I tried removing Busy box and reinstalling it... it was ok... I reinstalled Safestrap .... It loaded fine...
When I got to NC1 flash..., it says it can't see busy box or safestrap, either one might have a problem... They both loaded fine..... I tried flashing the Tar from above... Odin just sat there and finally said fail... twice.... I think the corruption is hurting the ability to enter recovery on the phone.... I can't enter "Recovery Mode" on the phone... It is damaged.... I thought flashing could do it...
lentmain said:
I'm on 5.0.1 Lollipop, the second one From Aug 11 OTA by the seller I bought it from.... I was new to android and didn't know there was a download mode....
The baseband version is: I think it is called I337OCOG0C4... It is the stock rom that came on the phone.... I can't find the stock ROM to redo it( try to at least...) It's on 0C4... I AM rooted , by Kingroot... Verification says so.... Two different versifiers... When I go to flash..., it comes up with that message... I tried removing Busy box and reinstalling it... it was ok... I reinstalled Safestrap .... It loaded fine...
When I got to NC1 flash..., it says it can't see busy box or safestrap, either one might have a problem... They both loaded fine..... I tried flashing the Tar from above... Odin just sat there and finally said fail... twice.... I think the corruption is hurting the ability to enter recovery on the phone.... I can't enter "Recovery Mode" on the phone... It is damaged.... I thought flashing could do it...
Click to expand...
Click to collapse
If you followed Muniz_is instruction step by step I don't think you should have a problem.
I used SS (safestrap) when I was in kit-kat alot but not anymore. It is tricky to use SS in lollipop. So I can not give you any comment on using SS. I use flashfire app instead.
So every time I want to install the custom rom, I followed Muniz_is instructions. Odin the NB1, use towelroot to root, install flashfire and flash the rooted OC4, install flashfire again and then flash the custom rom.
Muniz_is post is updated to OK2 but I am still using the OC4 files that posted previously. If you want to stay on OC4 do let me know.
What do you mean you can not enter recovery mode? I am sure you know the key sequence (press power+home+volume up) for recovery mode. If your phone is bricked, then you need to press the same keys for at least 10 sec and then let the power button go but keep pressing the home+volume-up until you felt the phone vibrate and see the small blue label at the top of the screen.
To use the odin you have to be in the download mode. To get to the download mode you need to press power+home+volume-down.
sway8966 said:
If you followed Muniz_is instruction step by step I don't think you should have a problem.
I used SS (safestrap) when I was in kit-kat alot but not anymore. It is tricky to use SS in lollipop. So I can not give you any comment on using SS. I use flashfire app instead.
So every time I want to install the custom rom, I followed Muniz_is instructions. Odin the NB1, use towelroot to root, install flashfire and flash the rooted OC4, install flashfire again and then flash the custom rom.
Muniz_is post is updated to OK2 but I am still using the OC4 files that posted previously. If you want to stay on OC4 do let me know.
What do you mean you can not enter recovery mode? I am sure you know the key sequence (press power+home+volume up) for recovery mode. If your phone is bricked, then you need to press the same keys for at least 10 sec and then let the power button go but keep pressing the home+volume-up until you felt the phone vibrate and see the small blue label at the top of the screen.
To use the odin you have to be in the download mode. To get to the download mode you need to press power+home+volume-down.
Click to expand...
Click to collapse
Your recovery mode probably works fine.... Mine is corrupt... You must use Recovery mode in Odin... I tried... Failed twice... Tried 4 other .tar's.... No good... A FAIL for each... I guess you have to have Recovery Mode just to allow the device to do anything... I DO appreciate you guys and ALL of your efforts ...... Maybe we could put my device on Android Studio and look at what is hurting it... I'd love that....
I had got myself into same mess in early January 2016 but I got out and all is working perfectly fine with me. Can you successfully get your i337 into download mode? if YES contact me via PM and I can tell you exact steps I performed to get myself back into fully working condition. Believe me it's simple steps not rocket science - just that one needs to perform very carefully.
To get to the download mode you need to press power+home+volume-down.
lentmain said:
Your recovery mode probably works fine.... Mine is corrupt... You must use Recovery mode in Odin... I tried... Failed twice... Tried 4 other .tar's.... No good... A FAIL for each... I guess you have to have Recovery Mode just to allow the device to do anything... I DO appreciate you guys and ALL of your efforts ...... Maybe we could put my device on Android Studio and look at what is hurting it... I'd love that....
Click to expand...
Click to collapse
blablu said:
I had got myself into same mess in early January 2016 but I got out and all is working perfectly fine with me. Can you successfully get your i337 into download mode? if YES contact me via PM and I can tell you exact steps I performed to get myself back into fully working condition. Believe me it's simple steps not rocket science - just that one needs to perform very carefully.
To get to the download mode you need to press power+home+volume-down.
Click to expand...
Click to collapse
Neither device will boot into Recovery mode... It gives 5 or 6 lines of stuff..., then freezes up... I can release it to use the phone... I'd like to try using Android Studio to see what can be done...
Isn't there a "Format" system and re-installation plan I can use..., like doing a computers hard drive..?
Recovery mode is different - it is WAY different - it will never boot into that mode as memory is messed up with wrong code.
I AM ASKING YOU TO GET IT INTO DOWNLOAD MODE - to get into download mode - the messed code is not executed....Try to get into DOWNLOAD MODE - i am 100% sure - it will go into download mode....It should....
lentmain said:
Neither device will boot into Recovery mode... It gives 5 or 6 lines of stuff..., then freezes up... I can release it to use the phone... I'd like to try using Android Studio to see what can be done...
Isn't there a "Format" system and re-installation plan I can use..., like doing a computers hard drive..?
Click to expand...
Click to collapse
blablu said:
Recovery mode is different - it is WAY different - it will never boot into that mode as memory is messed up with wrong code.
I AM ASKING YOU TO GET IT INTO DOWNLOAD MODE - to get into download mode - the messed code is not executed....Try to get into DOWNLOAD MODE - i am 100% sure - it will go into download mode....It should....
Click to expand...
Click to collapse
I have told you....." I pressed up vol, home and start at the same time... That should have started Recovery Mode... It didn't... It froze up at the little green man screen...."
MY DOWNLOAD MODE IS CORRUPT..... I can't figure another way around this....
If someone knew how to view the devices program on Android Studio..., MAYBE something could be done with the programming.... I'm not sure if a "Cut and Paste " would work on there... I guess I need to get a book on Android Studio... I already have it ( Android Studio SDK ) on my computer....
Any one here can tell me how to run it..?
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
lentmain said:
I have told you....." I pressed up vol, home and start at the same time... That should have started Recovery Mode... It didn't... It froze up at the little green man screen...."
MY DOWNLOAD MODE IS CORRUPT..... I can't figure another way around this....
If someone knew how to view the devices program on Android Studio..., MAYBE something could be done with the programming.... I'm not sure if a "Cut and Paste " would work on there... I guess I need to get a book on Android Studio... I already have it ( Android Studio SDK ) on my computer....
Any one here can tell me how to run it..?
Click to expand...
Click to collapse
blablu said:
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
Click to expand...
Click to collapse
It froze up.... It stopped moving foward to the lower potion of the Recovery program.... At the bottom..., you can choose the different ways to manipulate the program... Mine, both phone stop at the processing sign in....
It will require something more than a few buttons being pressed.... I'll have to learn to use the Android Studio and either rebuild the program from within or to reprogram it from outside..., like with a .tar flash....
blablu said:
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
Click to expand...
Click to collapse
I reflashed an At&t .pit file ( using Odin) and it rebuilt my file ( partition) for Recovery mode... Not sure how it did it... Now when I CAN get into recovery mode..., it doesn't recognize the SD card so I can't use the tools in Recovery mode to change the rom to something earlier, like Muniz_ri did in one of his wonderful fixes... (Double thanks Muniz_ri..)
Once Odin sees my device..., I set it up yo start a Muniz_ri renewing rom ( I337UCUFNB1_TWROOTABLE_FULL_ODIN.tar.md5 ) and it gets to "system.img.ext4" about 10% into it and then it freezes up....
Anyone have any ideas..?
If u are able to get to download mode - I strongly recommend first you flash ONLY Stock Partition file.
Then again reboot in download mode and then try the FNB1 file....this may work...but before all this flash proper pit file - refer to http://forum.xda-developers.com/showthread.php?t=2496517
stock partition file(s) are available on xda - search and download....
lentmain said:
I reflashed an At&t .pit file ( using Odin) and it rebuilt my file ( partition) for Recovery mode... Not sure how it did it... Now when I CAN get into recovery mode..., it doesn't recognize the SD card so I can't use the tools in Recovery mode to change the rom to something earlier, like Muniz_ri did in one of his wonderful fixes... (Double thanks Muniz_ri..)
Once Odin sees my device..., I set it up yo start a Muniz_ri renewing rom ( I337UCUFNB1_TWROOTABLE_FULL_ODIN.tar.md5 ) and it gets to "system.img.ext4" about 10% into it and then it freezes up....
Anyone have any ideas..?
Click to expand...
Click to collapse
very frustrated
nothing seems to work...
i rooted my LG g2 D801
with the all in one toolkit
i can use ADB and communicate with the
phone
so i followed this
http://forum.xda-developers.com/showthread.php?t=2449670
used option 2
file were pushed and all seems ok
so i use quick boot app to reboot in to recovery
and i get
black screen with small white fonts on top left that says
Secure boot error
cause : boot certification error.
then
white screen with black characters
Critical error
------------------------
DemiGod crash handler : Critical Error!
press key to choose dload mode or reboot.
1) volume up : dload mode
2) volume down : reboot
if you choose dload mode ,
please do following action .
1) dload mode , connect usb
2) get the ram dump image using QPST configuration
------------------------------------------
Same thing if i use flashify
to try install the TWRP.IMG
that i Downloaded or downloaded from flashify
besides
i cant use AutoRec as the screen dont respond to the touchscreen
i followed intruction to downgrade super Su to 2.46 but still
touchscreen dont work on Autorec...
this is not easy as it seems...
can some one help please
i am so depressed about this
Max.
UPDATE....
since i am on LP looks like i need the hybrid bootstack
from DanielStuart
so you need a 4.4 kit kat stack in order to load TWRP
?? Right ?
thing is how to flash the .zip file i just downloaded from the DanielS site for the D801
Tou should have used autorec
Sent from my LG-LS980 using Tapatalk
devil ££ sama said:
Tou should have used autorec
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
I tried autorec
but the damn thing dont response to keypress on the screen
maxolini said:
I tried autorec
but the damn thing dont response to keypress on the screen
Click to expand...
Click to collapse
Also
i tried to boot in to bootloader mode to use fastboot
to push the TWRP.img in
and... nothing
when i use the command
adb reboot bootloader
i just reboots my phone normally into home screen
maxolini said:
very frustrated
nothing seems to work...
i rooted my LG g2 D801
with the all in one toolkit
i can use ADB and communicate with the
phone
so i followed this
http://forum.xda-developers.com/showthread.php?t=2449670
used option 2
file were pushed and all seems ok
so i use quick boot app to reboot in to recovery
and i get
black screen with small white fonts on top left that says
Secure boot error
cause : boot certification error.
then
white screen with black characters
Critical error
------------------------
DemiGod crash handler : Critical Error!
press key to choose dload mode or reboot.
1) volume up : dload mode
2) volume down : reboot
if you choose dload mode ,
please do following action .
1) dload mode , connect usb
2) get the ram dump image using QPST configuration
------------------------------------------
Same thing if i use flashify
to try install the TWRP.IMG
that i Downloaded or downloaded from flashify
besides
i cant use AutoRec as the screen dont respond to the touchscreen
i followed intruction to downgrade super Su to 2.46 but still
touchscreen dont work on Autorec...
this is not easy as it seems...
can some one help please
i am so depressed about this
Max.
UPDATE....
since i am on LP looks like i need the hybrid bootstack
from DanielStuart
so you need a 4.4 kit kat stack in order to load TWRP
?? Right ?
thing is how to flash the .zip file i just downloaded from the DanielS site for the D801
Click to expand...
Click to collapse
i think you dont need anyhting if on KK but you could try this bootstacks
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
theres autorec for KK and autorec for lollipop di you use the correct one?
raptorddd said:
i think you dont need anyhting if on KK but you could try this bootstacks
http://forum.xda-developers.com/lg-g2/development/lg-g2-bootstacks-t3173715
theres autorec for KK and autorec for lollipop di you use the correct one?
Click to expand...
Click to collapse
Hi! i recently got a LG G2 D800 AT&T model and immediately rooted it with stump root...but after that while flashing recovery i tried to use auto rec but it didnt work for me...so i tried TWRP manager and installed twrp its says recovery flashed succesfully. But whenever i boot in to recovery it shows the LG logo and in the top left corner it says secure boot error in white text can you please help me with this? im really stuck and dont know what to do as i want to flash cm13. thanks.
rohan1310 said:
Hi! i recently got a LG G2 D800 AT&T model and immediately rooted it with stump root...but after that while flashing recovery i tried to use auto rec but it didnt work for me...so i tried TWRP manager and installed twrp its says recovery flashed succesfully. But whenever i boot in to recovery it shows the LG logo and in the top left corner it says secure boot error in white text can you please help me with this? im really stuck and dont know what to do as i want to flash cm13. thanks.
Click to expand...
Click to collapse
i would suggest to go back to stock and start from scratch othe wise youll end up with hard brick..
follow this for d800.
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
maxolini said:
i cant use AutoRec as the screen dont respond to the touchscreen
Click to expand...
Click to collapse
Autorec is damn slow and has no progress bar. While its gathering device infos it won't ever respond. Be patient and when Autorec finished gathering it will work. Good luck!
raptorddd said:
i would suggest to go back to stock and start from scratch othe wise youll end up with hard brick..
follow this for d800.
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
Click to expand...
Click to collapse
Yes sir... Followed the same flashed back to stock using lg flash tools and then repeated the process and voila I'm now running on cyanogenmod 13 snapshot build....Thanks a lot..btw if you're on cm13 have you tested out the latest nightly....is it better and bug free or should i keep using the snapshot build....its very smooth but i just find the battery consumption to be a bit high.. Anyways thanks a lot for your help...
rohan1310 said:
Yes sir... Followed the same flashed back to stock using lg flash tools and then repeated the process and voila I'm now running on cyanogenmod 13 snapshot build....Thanks a lot..btw if you're on cm13 have you tested out the latest nightly....is it better and bug free or should i keep using the snapshot build....its very smooth but i just find the battery consumption to be a bit high.. Anyways thanks a lot for your help...
Click to expand...
Click to collapse
just hit the thanks button..:good:
good that you are all set up.. i not on cm am on stock rom..
so i have no idea... i have flashed blisspop and liquid dark.. but uninstalled next day it gave erros. like not booting. and bisspop. when i tried 5.1.1 volume was so low. i think they fixed it now.
Jan Philipp said:
Autorec is damn slow and has no progress bar. While its gathering device infos it won't ever respond. Be patient and when Autorec finished gathering it will work. Good luck!
Click to expand...
Click to collapse
I get the pop ups that says finished gathering information and backup complete
still i waited 5 minutes ( lol... yess too long.. but just to make sure )
and press the screen... NOTHING!!!!
so i will think will flask stock
but KK
right ?
i already downloaded d801v20g00.kdz
and im now that one stock
BTW,
a friend of mine just got a NEXUS 5 and the camera sux
very grainy in marginal light, suppose to be very similar to the G2 but no!
G2 is way better camera
also i have read somehwere that you can install another camera package from the G3 or G4
if i an not mistaken and that is better than the stock G2 camera
The better the algorithms to render a JPG from the RAW DATA of the chip camera sensor
the best the pic looks
is XCAM the one ?
Well, im back to stock d801v20g
i am planning to install Cloudy v3 or CM13
any recomendation ?
i heard XCAM only work with stocks
so... tough decisions
maxolini said:
I get the pop ups that says finished gathering information and backup complete
still i waited 5 minutes ( lol... yess too long.. but just to make sure )
and press the screen... NOTHING!!!!
so i will think will flask stock
but KK
right ?
i already downloaded d801v20g00.kdz
and im now that one stock
BTW,
a friend of mine just got a NEXUS 5 and the camera sux
very grainy in marginal light, suppose to be very similar to the G2 but no!
G2 is way better camera
also i have read somehwere that you can install another camera package from the G3 or G4
if i an not mistaken and that is better than the stock G2 camera
The better the algorithms to render a JPG from the RAW DATA of the chip camera sensor
the best the pic looks
is XCAM the one ?
Well, im back to stock d801v20g
i am planning to install Cloudy v3 or CM13
any recomendation ?
i heard XCAM only work with stocks
so... tough decisions
Click to expand...
Click to collapse
for camera use xcam.. only works on stock or roms based on stock no aosp or cm...
for raw use freedcam..
for rom i recommend icex rom.. its stock..