[Q] Root Galaxy note3 N900T 4.3 T-MOBILE Help! - Galaxy Note 3 Q&A, Help & Troubleshooting

Root Galaxy note3 N900T 4.3 T-MOBILE Help
Please help
I tried:
Odin3 v3.07 and CF-Auto-Root-hltetmo-hltetmo-smn900t ( says pass) but I had a problem of reseting phone blocked on ( booting recovery ...)
After I use:
odin3.09 and n900t-cwm-recovery-6.0.4.4(1025) finished ( says pass ) but allways not rooted
What to do ?

abote didier said:
Root Galaxy note3 N900T 4.3 T-MOBILE Help
Please help
I tried:
Odin3 v3.07 and CF-Auto-Root-hltetmo-hltetmo-smn900t ( says pass) but I had a problem of reseting phone blocked on ( booting recovery ...)
After I use:
odin3.09 and n900t-cwm-recovery-6.0.4.4(1025) finished ( says pass ) but allways not rooted
What to do ?
Click to expand...
Click to collapse
Here is what I used on both jb and kk. I went to twrp home page and downloaded the latest version (img.tar) and flashed it via Odin 3.09. I then downloaded downloaded the custom ROM and flashed using the recovery. If you are wanting to stay stock with root download the latest version of superSU to your SD card and then flash using the custom recovery.
Here is one thing I found out after updating to KK when holding the buttons to boot into recovery only hold them until you see the text "recovery booting" (or something similar). If you continue to hold, the phone will bootloop and actually turn on. Hope this helps.

FFTony said:
Here is what I used on both jb and kk. I went to twrp home page and downloaded the latest version (img.tar) and flashed it via Odin 3.09. I then downloaded downloaded the custom ROM and flashed using the recovery. If you are wanting to stay stock with root download the latest version of superSU to your SD card and then flash using the custom recovery.
Here is one thing I found out after updating to KK when holding the buttons to boot into recovery only hold them until you see the text "recovery booting" (or something similar). If you continue to hold, the phone will bootloop and actually turn on. Hope this helps.
Click to expand...
Click to collapse
please where to download this file please? you said you go to twrp home page, where is it?
Second, you said: If you are wanting to stay stock with root download the latest version of superSU to your SD card and then flash using the custom recovery.
I don't understand what you mean, can we root it without flashing the firmware? only using the latest version of superSU to my SD card and then flash using the custom recovery. that's all.
Other questions:
Oneclic root software can it work with Note 3 N900T 4.3 T-MBIL , Such as: VRoot_1.7.4. or kingo Android root ?

abote didier said:
please where to download this file please? you said you go to twrp home page, where is it?
Second, you said: If you are wanting to stay stock with root download the latest version of superSU to your SD card and then flash using the custom recovery.
I don't understand what you mean, can we root it without flashing the firmware? only using the latest version of superSU to my SD card and then flash using the custom recovery. that's all.
Other questions:
Oneclic root software can it work with Note 3 N900T 4.3 T-MBIL , Such as: VRoot_1.7.4. or kingo Android root ?
Click to expand...
Click to collapse
Twrp: http://teamw.in/project/twrp2
(Make sure you download the correct version for you OS. Kitkat or Jelly Bean. If it were me I would make sure you are updated to KK.) Make sure the file you download is the one ending with img.tar and flash with Odin.
You do not need to flash a custom ROM to achieve root. You can use the base android version and have root. If you want to use a custom ROM there is no need to mess with SuperSU as almost every ROM will have it prebuilt in. If you are ONLY wanting root without changing your ROM then you will need to flash SuperSU using a custom recovery, I prefer twrp.
http://forum.xda-developers.com/showthread.php?t=1538053
Here is the link to get the .zip file for the most up to date version of SuperSU.
Here are some instructions:
Flash twrp using Odin
Enter recovery mode (if not sure how to do it, Google it) Make sure you only hols the buttons until the words "recovery booting" appear and then release.
Once in twrp you can then flash your ROM or SuperSU. If you do not know how to use twrp just look it up on YouTube.
Once you have twrp and SuperSU OR a custom ROM you should be rooted.
WARNING: Rooting your phone with my method WILL trip Knox!
Extra questions: I did research and did not trust the companies performing the one click root. It's up to you on who you trust. I have no experience with the one touch rooting, but as long as they say you device is supported by them then you should be good to go.
sm-900t: Powered by X-Note V13
sm-900t: Powered by X-Note V13

Related

[Q] Not able to install TWRP or CWM recovery. AT&T S4 I337

*****************************************
*******HELP HELP HELP*************
*****************************************
Hi,
I am unable to install CWM or TWRP recovery on my AT&T US - S4 I337. Baseband is NB1.
I have tried almost every option on xda , rom manager , twrp manager , loki method using emulator , 3 way tool , casual etc.
Loki gives loki aboot version error. Earlier phone was on NC1 , got it on NB1 using odin.
I want to get rid of original stock , which is loaded with lot of crap and want to install light weight custom rom.
Any pointers , help is highly appreciated.
Thanks.
rdxdha said:
*****************************************
*******HELP HELP HELP*************
*****************************************
Hi,
I am unable to install CWM or TWRP recovery on my AT&T US - S4 I337. Baseband is NB1.
I have tried almost every option on xda , rom manager , twrp manager , loki method using emulator , 3 way tool , casual etc.
Loki gives loki aboot version error. Earlier phone was on NC1 , got it on NB1 using odin.
I want to get rid of original stock , which is loaded with lot of crap and want to install light weight custom rom.
Any pointers , help is highly appreciated.
Thanks.
Click to expand...
Click to collapse
Download Free version of Rom Manager and after install see if it will not install which ever you want through it CWM or TWRP. Way I do it. You are Rooted???? Here is link https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en After install open and click on "Flash ClockworkMod Recovery" then it gives you choice of CWM or TRWP
I already tried rom manager after rooting the phone, and get the success message as well. But when i restart phone in recovery mode , I am still getting stock recovery options instead of CWM or TRWP.
rdxdha said:
I already tried rom manager after rooting the phone, and get the success message as well. But when i restart phone in recovery mode , I am still getting stock recovery options instead of CWM or TRWP.
Click to expand...
Click to collapse
You can't install custom recoveries. Our bootloader is locked. Your only option is using safestrap
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
U can't install a traditional recover. Since U are on NB1, your baseband is locked and your only option is Safestrap (TWRP). Read the instructions carefully at least once all the way thru and then proceed. Pay close attention because it's not like most phones. It works just fine. U can have a heavily modified Touch Wiz Rom or even now a AOSP based Google Play Edition Rom.
Proceed here:
[INDEX] All things AT&T MK2, NB1, and NC1 (including ROMs
rdxdha said:
I already tried rom manager after rooting the phone, and get the success message as well. But when i restart phone in recovery mode , I am still getting stock recovery options instead of CWM or TRWP.
Click to expand...
Click to collapse
What are you looking for in CWM recovery that is different for Stock recovery????
tailgunner9 said:
What are you looking for in CWM recovery that is different for Stock recovery????
Click to expand...
Click to collapse
I am trying to install custom rom , without safestrap. As bootloader is locked on my phone , I cant use CWM.
Using safestrap , I was able to install [AOSP] Official 4.4.3 - S4 Google Edition. but now I am not able to encrypt my phone.
Any idea on how to encrypt phone now ?

Please Help Very Frustrated.

hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
dork997 said:
hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
Click to expand...
Click to collapse
Akalsemann said:
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Try that
Akalsemann said:
Try that
Click to expand...
Click to collapse
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
vinura kithmal said:
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
Click to expand...
Click to collapse
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
dork997 said:
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Click to expand...
Click to collapse
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
dork997 said:
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
Click to expand...
Click to collapse
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Swimguy14 said:
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
vinura kithmal said:
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Click to expand...
Click to collapse
I followed instructions given earlier to install philz recovery, i opened it by booting into it immediately i selected format for new rom install. after that i am stuck on samsung logo i think the old rom is now deleted. Now i am downloading fresh 5.0.2 UK from sammobile i will download it and try to root it normally with flashing CF ROOT via odin. if it does not work then i will do what u guys said. I dont know if TWRP will work by the same method (booting immediately into recovery) but philz recovery did. And i will also try flashing a prerooted Rom. What i dont understand is that why is this happening in the first place? i had an alpha before i could enter into TWRP normally i rooted it with CF AUTO root normally...no errors or anything why is this happening on my S5? the last owner must have done something weird with it ...i am trying to figure out why is this happening in the first place. Appreciate ur feedback.
I also dont know why this is happening
and yeah
i had all the galaxy S series upto S5 and this the only device that is not rooting with CF-auto root
the latest updates from samsung may have done something i dnt knw
and eralier mentioned method worked 100% for me and i did root my device like that
And last owner may b or may not done anything with it because my device is a brand new and still i had that issue

Unable to install custom recovery and flash custom roms on rooted note 3 lte

I am on a UK (vodafone) phone 4.4.2 KK and after rooting with odin and tripping knox (obviously) i installed CWM And TWRP and entered recovery but only after a long time i discovered that the recovery mode i was entering was stock .
In the recovery mode i couldnt find the option to install from zip only the option to install from external storage.
I have downloaded the CM 11 4.4.4 and put it on the external sd card.
In the recovery mode i navigated to the location of the CM 11 zip and attempted to flash it .
It goes through the process and at the end it says something like installation successful but the the phone boots into the normal stock firmware.
After reading a ton of material and articles i have discovered that my bootloader may be locked and this is the reason i cannot install CWM and flash custom roms.
In the end i have 3 questions.
Is there curently a solution to install CWM and flash custom roms on phones with locked bootloders ?
Will i be able to update to lollipop via Kies when is released ?
Will i be able to return my phone to its original state so that the lollipop update when it is released wont detect that the phone has been modified ?
Basically i am stuck. I have a rooted phone with void warranty and unable to install roms because the bootloder is locked ??????
I would really apreciate some help because i have run out of options and the frustration has reached stratospheric levels.
Thanks in advance for your help.
You rooted with ODIN and installed both CWM and TWRP .Thats all wrong odin is not root and you don't flash two recovery s .
You say your bootloader is locked = what model phone do you have .
Its reading as fail read the very basics .
Start at the beginning at for that you need to know what model number you have . You then find the correct root for your model and flash a recovery either CWM or TWRP not both .
JJEgan said:
You rooted with ODIN and installed both CWM and TWRP .Thats all wrong odin is not root and you don't flash two recovery s .
You say your bootloader is locked = what model phone do you have .
Its reading as fail read the very basics .
Start at the beginning at for that you need to know what model number you have . You then find the correct root for your model and flash a recovery either CWM or TWRP not both .
Click to expand...
Click to collapse
I did not flash both.
I only installed both and tried to flash either.When i saw that i couldn flash one i tried the other one.
My phone model number is SM-9005 ..
The root file i used was CF-Auto-Root for SM-N9005 .
uxaar said:
I did not flash both.
I only installed both and tried to flash either.When i saw that i couldn flash one i tried the other one.
My phone model number is SM-9005 ..
The root file i used was CF-Auto-Root for SM-N9005 .
Click to expand...
Click to collapse
Flash this in Odin.
https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
Sent from my SM-N9005 using Tapatalk
Untick auto reboot in Odin when you flash recovery then boot to recovery using three button combo stock ROM rewrites stock recovery when it boots iirc
celderic said:
Flash this in Odin.
https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you very much.
That worked flawlessly and afterwards i managed to install CM12 5.1.
you saved me .Thanks again

trying to root Note 4 5.1.1 on 910W8

Hey guys i followed this youtube guide for rooting 5.1.1 using TWRP Method https://www.youtube.com/watch?v=qpsGX_Xoxcg
i downloaded all the files but the firmware (not listen i have n910W8 = telus)
I have odin, supersu, TWRP (which n910w8 is listed) and samsung drivers.
I moved superSU and the TWRP file to root directory of note 4 5.1.1. rebooted into download mode, saw the blue indicator on odin and loaded the file. Rebooted holding volume up this time and tried to load the kernal but it doesnt exist.
I think im confused the TWRP file is NOT the kernal? Where can I get a kernal for n910W8 (telus)
thanks in advance!!
So I found this
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
which is telus 5.1.1 Rom. ill move this to my root directory and load the 910W8 TWRP file in odin and flash? Ill give it a try now wish me luck lol
ok i followed a guide online and now my phone just keeps restarting. I think im in big trouble. Im able to load openrecovery-twrp-2.8.1.0-trltecan.img into odin and boot to TWRP but now i cant load kernels? looked so easy to do now im down a phone? any help is much appreciated thanks!!!
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
ok so i loaded openrecovery-twrp-2.8.1.0-trltecan.img in AP (for my device) copied the custom rom
" cm-12.1-20150423-NIGHTLY-trltetmo" which was suppose to work with my 910w8 (910T) used recovery to flash it and also supersu it flashed OK... I restart and i see a little blue guy and its stuck optimizing apps. Suck in restart loop.
what did i do wrong? try a different kernel ?
thanks in advance
EDIT 1
im trying the " Tekxodus" rom. this file is way larger whats going on with that. Is it the same procedure to flash it?
EDIT 2
Flashed to tekxodus rom optimizing apps... now its stuck System UI has stopped. and I cant do nothing. Any suggestions? ?? ?
EDIT 3
Do I need to flash a certain BootLoader along with the recovery for my device (BL and AP) ? , reboot in recovery and flash the custom rom ie "Tekxodus" ?
found this guide for 910C
http://www.ibtimes.co.uk/how-root-galaxy-note-4-n910c-android-5-1-1-lollipop-1518168 with these steps
"Step-1: Download the flashable root package and transfer it to the storage of the phone
Step-2: Download Android 5.0.1 bootloader package. Extract it using any extracting tool and you should find a folder containing Odin flashable tar package and Odin binaries"
so confused lol
All you have to do is Odin stock 5.1.1 rom (COI4 i believe) then Odin TWRP then flash Tekxodus V3.2. Let everything optimize and let it sit there for a good 10 mins after optimization. Ignore what its doing. It will just work. No need to flash anything else unless you want Xposed, then you flash that right after flashing Tek (do not boot in between)
any idea where to get a custom kernel for 910w8 5.1.1 to root stock rom?
Im running this rom (flashed using odin)
http://www.sammobile.com/firmwares/download/56498/N910W8VLU1COI4_N910W8OYA1COI4_TLS/
stock telus rom. I loaded this rom by clicking BL in odin and selecting it (along with my recovery for telus 910w8). This was the only was to get my phone back into working order.
______-
I loaded my recovery for telus into odin and went to download mode.
booted into TWRP
Flashed Tekxodus V3.2.
Optimized apps for about 10 minutes and it just restarted and optimized again and again.
One time it said System UI has stopped and I was hooped.
not sure where I went wrong?
thanks for the response btw I really want to get this going cheers
equlizer said:
You need to odin (bell, rogers, telus) 5.1.1 then odin TWRP then twrp a custom kernel. Our 5.1.1 needs a custom kernel in order to work rooted. Or.....you can load a custom 5.1.1 rooted rom that is W8 compatible or any Tmobile rom such as Tekxodus which i am running.
Click to expand...
Click to collapse
can i use any carrier software for the COI4? That's my only question. Thanks for helping!!

GALAXY Note 3 SM-N900.. Help..

I am a new member and I don't know where to post this on the forum and I am unable to send this via the contact link at XDA... I apologize. Kindly guide...
Hi..
Subject: Installing the custom recovery and latest cyanogenmod on my Samsung Galaxy Note 3 SM-N900.
A few details :
Samsung Galaxy Note 3 SM-N900 running on stock rom Android version 4.4.2 and the build Number is N900XXUDND1. It is an Indian version.
I rooted my phone via Odin cfautoroot successfully but was not unable to load custom recovery cwm since the phone would go blank and stuck in boot loop.
I had to reinstall the stock firmware 4.4.2 via odin but could not install custom recovery via Odin and again stuck in boot loop . I reinstalled firmware 4.4.2 and tried installing custom recovery via flashify me app but again the phone went blank although I could go to download mode but stuck in boot loop.
I again reinstalled firmware 4.4.2 via odin but later I could not even root my phone via Odin!!..so I rooted my phone via king root app successfully and then changed it to supersu me root successfully without a problem.
Now the problem is I want to load custom recovery in order to load Cyanogenmod.
I tried installing cwm recovery via the clockworkmod app but it does not recognize my device officially.
I tried installing custom recovery via twrp app but getting error there also.
Now this is the info I see when I am in download mode:
ODIN MODE.
PRODUCT NAME: SM-N900.
CURRENT BINARY: Samsung Official.
SYSTEM STATUS: Custom.
KNOX WARRANTY VOID: 1
RP SWREV: A4
Is the bootloader locked in my device? Is this the reason I am unable to load custom recovery? I don't even know how to check the present status lock/unlock status of bootloader
I want to load custom recovery(cwm or twrp) and load the latest cyanogenmod at the earliest and I would appreciate if I can get step by step details of doing so.
Is it possible to do this without using a computer?...
Thanking you...
You do not need to root the phone before installing a custom ROM. You can install a custom recovery using Odin.
Some good info here: http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
audit13 said:
You do not need to root the phone before installing a custom ROM. You can install a custom recovery using Odin.
Some good info here: http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
Click to expand...
Click to collapse
.... Hi.. Thank for replying so soon...
I checked the link you provided but it is all about rooting only.. As mentioned earlier, I rooted my phone and confirmed the same via root checker app. Now I just want to install cwm/twrp recovery and then go ahead and install cyanogenmod...
audit13 said:
You do not need to root the phone before installing a custom ROM. You can install a custom recovery using Odin.
Some good info here: http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
Click to expand...
Click to collapse
.... Oops sorry... I know there are custom recovery links present too but can you provide the direct file link pertaining to Samsung Galaxy Note 3 SM-N900 running 4.4.2 exynos??

Categories

Resources