I'm using Temaseks CM and my Usb cable isn't working. Temaseks Known Issues in the thread is "WIP" and Usb Host controller reports that the S3C Usb Host driver wasn't found
Has anyone an idea how I can install that driver?
Related
No way to have an usb host??
Have you tried this?
Zeno USB Host Drivers v6.0a
Haven't tried... just aksing if anyone succeded to get this host feature on Diamond...
Hi,
I have just picked up a Note 3 on Three UK.
Am I right in assuming that the wireless chipset BCM4339 which is the same as on the Nexus 5 is still not able to use bcmon mode to allow us to enable monitor mode?
Would a specific ROM be necessary to allow a TP-Link WN722n (RT2800usb) to work on OTG cable?
I have tried both bcmon on my note 3 and also my TP-Link via USB OTG cable and neither have had any results.
Thanks
Toby
I've installed USB Host Check to confirm that USB host support is enabled on my note 3.
(android.hardware.usb.host.xml OK)
(handheld_core_hardware.xml OK)
I then installed USB Host Controller.
Both devices recognised but obviously not working. (Atheros USB 2.0 WLAN for TP-WN772n) and (ASIX Elec Corp AX88x72A) for USB ethernet.
When I run USB Host Controller I get the following error message:
"s3c usb host driver not found".
Another member on XDA posted a link to the Halaszk Kernel on the N9000 apparantly having OTG USB host support for S3C
(Original post http://forum.xda-developers.com/showthread.php?t=2599045)
Halaszk Kernel for the N9000
http://forum.xda-developers.com/showthread.php?t=2590320
Toby
I'm still hitting a brick wall on this one search wise.
Would stil love to be able to use my WN722N on my Note 3.
Has anyone any experience in modifying the Kernel Module to allow the ath9k to work on Note 3?
Getting a wireless adapter to work on Ubuntu or any form of Linux can be difficult if the manufacturer doesn't provide direct driver support or at the very least a "Tar" which would allow an end user (with sufficient skill) to compile the drivers them self. My understanding of this is limited but from what I can remember Android is JavaScript VM running on a Linux kernel. So you need the Linux source code for the driver which usually comes in a "Tar". Feel free to correct me if I am wrong.
I'm using Temasek's CM11 and my S3C USB Host Drivers are missing. Is there any way to fix this?
Hello everybody out there.
I am trying to add support for the AR9271 USB WiFi device in the CM11 release kernel on my i9507. I've managed to compile the kernel with ath9k and mac80211 (dependency) baked in instead of as modules. I believe this would skip the need to load and unload modules to get the card working. I booted successfully and plugged in my adapter with an OTG cable, but upon ifconfiging and whatnot, I could not find the adapter at all. I tried using Pcap Capture by Kismet, and that reported no connected USB NICs.
I'm losing sleep . What am I doing wrong? Does anybody have an idea? I can release my build of kernel with ath9k support if anyone wants it, although I guess anyone who answers this probably doesn't need it anyway ._.
Thanks guys.
EDIT:
Apparently Kismet Pcap only works with that one Realtek chipset in the Alfa, so that's out the window.
Anyway, I have installed the firmware file (htc_9271.fw) to /system/etc/firmware and the device shows up with lsusb with ID 13d3:3327, so it's being recognized, but the kernel still takes one look at it, laughs, and dies.
Here is the dmesg output:
<6>[14516.472685] usb 2-1: New USB device found, idVendor=13d3, idProduct=3327
<6>[14516.472716] usb 2-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
<6>[14516.472747] usb 2-1: Product: UB93
<6>[14516.472747] usb 2-1: Manufacturer: ATHEROS
<6>[14516.472777] usb 2-1: SerialNumber: 12345
It seems like the kernel just derps and doesn't load the ath9k_htc stuff it's supposed to. I do remember that when I compiled the kernel, I got errors compiling the ath9k modules. I found no patches for this problem, so I took the ath folder from the linux kernel backports (compat-wireless) and plopped it in the CM kernel drivers folder, replacing the old one. Worst way to merge code, I know. The kernel compiles fine, but according to dmesg, the drivers either aren't there, or aren't doing anything.
hi, I have a lg g2 d800 (att) with CM 10.2. I'm thinking of buying a otg micro usb cable: http://www.amazon.com/gp/product/B00KILQLKE/ref=gno_cart_title_0?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
does anyone know if it will work? i'll be connecting a garmin edge 500 to get files off of.
edit: I installed a app called usb host check. it says:
android.hardware.usb.host.xml
Not found
handheld_core_hardware.xml
USB host not enabled
tablet_core_hardware.xml
Not found
it says "usb host support is not enabled. a fix attempt can be performed."
EDIT2: just a update. it works. I got the cable I linked from amazon. and I didn't use usb host check to perform a fix.