Database Users

[Q] Trying to find stock rom for SM-N9005, note 3, don't know original network

I have this note 3 SM-N9005 stuck at Samsung logo screen. I am trying to put stock rom in it but my problem is i don't know original network of this phone, because i bought it from ebay. i checked it on internet but so many European countries are using this model number
I am attaching download mode screen in attachment if that can help in finding original network of this phone
Other information about this phone got from its box
Serial Number : RF1DA741A8E
Model Number : SM-N9005
SSN : N9005GSMH
FCC ID : A3LSMN9005
MPN: N9005ZKEBTU
Please help me finding original network of this phone so i can find suitable ROM for this phone.
Thanks in advance

U r from UK? U may find it on sammobile.com

Brownpanda said:
I have this note 3 SM-N9005 stuck at Samsung logo screen. I am trying to put stock rom in it but my problem is i don't know original network of this phone, because i bought it from ebay. i checked it on internet but so many European countries are using this model number
I am attaching download mode screen in attachment if that can help in finding original network of this phone
Other information about this phone got from its box
Serial Number : RF1DA741A8E
Model Number : SM-N9005
SSN : N9005GSMH
FCC ID : A3LSMN9005
MPN: N9005ZKEBTU
Please help me finding original network of this phone so i can find suitable ROM for this phone.
Thanks in advance
Click to expand...
Click to collapse
BTU for U.K.

jdomadia said:
BTU for U.K.
Click to expand...
Click to collapse
Thanks a lot guys , I am downloading it so I will let you know soon , plz let me know how you figured it out , just for future reference

Thanks for your help so far , so as you suggested, i downloaded file for BTU UK and using odin 3.07. But I am getting these messages
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
lot of people suggested to get PIT file for this. I dont know from where i can get that.
lof of people suggested for hard reset. but on hard reset screen it stuck at error message, kies update error so go to download mode
Please suggest what i can do about it now ??

The device was running Kitkat 4.4.2 can tell by Odin mode where it says
Udc start.
Grab the stock Polish ROM XEO and flash it or the newer Polish one.
Edit: failing on bootloader also, another give away.
Sent from my Moto G via Tapatalk

radicalisto said:
The device was running Kitkat 4.4.2 can tell by Odin mode where it says
Udc start.
Grab the stock Polish ROM XEO and flash it or the newer Polish one.
Edit: failing on bootloader also, another give away.
Sent from my Moto G via Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, is XEO and BTU are compatible with each other ? what about downgrade option ? can we go to Jelly bean now or is it not possible now ?

Brownpanda said:
Thanks for your reply, is XEO and BTU are compatible with each other ?
Click to expand...
Click to collapse
Yup XEO works on BTU devices, have a BTU device myself

radicalisto said:
Yup XEO works on BTU devices, have a BTU device myself
Click to expand...
Click to collapse
I am downloading right now , I will let you know how it will go, Thanks for this information

Thanks Thanks Big Thanks for this help, in my case i guess i was using all jelly beans files 4.3. I guess my friend tried to flash 4.4.2 kitkat when it got damaged. I guess right now its not possible to downgrade from kitkat to jelly beans.
Thanks a lot jdomadia for your big help, I am still waiting for your reply how did you figure out it was from BTU UK ? we do see lot of phones with same problem. please let me know
Thanks a lot Radicalisto for sharing your experience , yes you were right XEO and BTU were compatible
If anybody need any help on this thread please do not hesitate to contact me, i will be very happy to share my experience

uogard my note 3 SM-N9005 form 4.4 to 5.0 wifi stop working
please I need help about my Note 3 SM-N9005
I bought from the ebay before 2 months ago it was good but I did upgrade to Android 5.0 using Odin ( 5 files PIT, BL, AP, CP, CSC ) finish SUCCESSFUL but after rebooting I find the WiFi is not working at all
I have try for more than ten different firmware but nothing the WiFi still not working
Model: SM-N9005
FCC ID : A3LSMN9005
SSN : N9005GSMH
SN : MAM2C88YT14
please any body can help me

Brownpanda said:
Thanks Thanks Big Thanks for this help, in my case i guess i was using all jelly beans files 4.3. I guess my friend tried to flash 4.4.2 kitkat when it got damaged. I guess right now its not possible to downgrade from kitkat to jelly beans.
Thanks a lot jdomadia for your big help, I am still waiting for your reply how did you figure out it was from BTU UK ? we do see lot of phones with same problem. please let me know
Thanks a lot Radicalisto for sharing your experience , yes you were right XEO and BTU were compatible
If anybody need any help on this thread please do not hesitate to contact me, i will be very happy to share my experience
Click to expand...
Click to collapse
They knew it was BTU because all phones from the UK, regardless of operator, are BTU (AFAIK), with the exception of Three.

I have a SM-N9005
SERIAL NUMBER RF1DA9A6R1Z
FCC ID : A3LSMN9005
SSN : N9005GSMH
Anyone knows the original firmware, can you help me please?

Im using Note3 N9005 and im on 4.4.2 kitkat.
I want to upgrade my firmware to lollipop.
My AP: N9005DXUFNG2
CP: N9005DXUFNG1
CSC: N9005OLCFNG1
my question is Which contry firmware should i flash?

Don't need any help.
I flash lollipop rom N9005 by myself.
Waste of time...........
Sent from my SM-N9005 using XDA Free mobile app

<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOK6_N9005BTUGBOJ1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> SingleDownload.
<ID:0/018> aboot.mbn
<ID:0/018> NAND Write Start!!
<ID:0/018> FAIL! (Auth)
<ID:0/018>
<ID:0/018> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
my phone info is
model:sm-n9005
fcc id:a3lsmn9005
ssn:-n9005gsmh
---------- Post added at 02:19 AM ---------- Previous post was at 02:12 AM ----------
shamim shambu said:
Don't need any help.
I flash lollipop rom N9005 by myself.
Waste of time...........
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
what country did you choose please help me

styphon said:
They knew it was BTU because all phones from the UK, regardless of operator, are BTU (AFAIK), with the exception of Three.
Click to expand...
Click to collapse
Plus exception of O2 EE VOdA etc etc .

Hi there, i lost my stock rom can any one help me find i cant find it for my model
Model SM-N9005
FCCID A3LSMN9005
SSN N9005GSMH
Made in Vietnam by Samsung

faisalmemon said:
Hi there, i lost my stock rom can any one help me find i cant find it for my model
Model SM-N9005
#
READ this thread .
See stock rom posts in General section see sammobile or samsung-updates .
Hundreds of roms for N9005 .
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Click to expand...
Click to collapse

ROOT newest 4.4.2 without tripping KNOX

Hi guys, now i can confirm that there is a possibility to root newest official Samsung 4.4.2 roms ( newer than 6 jul ) without tripping knox. I just did that to my phone today - s4 mini LTE - i9195.
Quick guide to do that. In this case i downloaded newest rom for Germany (DBT region) - NH5 from sammobile.
1. Flash your phone with this rom and turn it on.
2. Again run Odin 3.09 and as AP give kernel from older rom - NE6
3. Run phone, google towel root, install, make it rain.
4. Run odin and flash back to newest kernel that matches your rom, in this case - NH5.
6. Install SuperSU and enjoy your rooted phone with newest 4.4.2 kit kat with knox 0x0 !
Kernel for NH5 (DBT) for s4 mini:
https://mega.co.nz/#!mtcBjbYD!CK6S5zoTU7qkaau0OCfNglL62roTWb2dvNMeYk1J8oU
Kernel for NE6 (DBT) for s4 mini:
https://mega.co.nz/#!ewMDWYIK!ZV9o-94hLyjvHyDKi8WCTXXLY-67UQRVwxaYEcVPO4A
You can do the same with different roms, just use this script to prepare kernel for flashing with odin:
http://forum.xda-developers.com/showthread.php?t=2446269
Thanks for:
@wajiman
@_alexndr
Confirmation photos:
https://mega.co.nz/#!WpNWFbRY!U0eWjuO2n-ZyMZSUARlDpqoj9mzvaCFWLah-9g9AAHM
https://mega.co.nz/#!648RhIAQ!v1vVrzMkh0zWhEPSbdanv_F-Ix0pXeqnO0wImzPtSRM
https://mega.co.nz/#!y4UmDCzb!5lcMCM4la_ogxC5r4MfXdtxl5YFZeAzgidMsCtJIQqw
if you like it, click thanks !

can it's supported i9192
can it's supported i9192

Rooted Samsung Galaxy S4 GT-I9515
Thanks a lot for the write-up, lefti696!
For what it's worth, I successfully rooted the Samsung Galaxy S4 VE (GT-I9515) with the newest firmware (I9515XXU1ANI3), applying your strategy.
The steps I took were:
download the current and an older stock firmware (I9515XXU1ANI3 and I9515XXU1AND3, respectively),
extract the boot.img from both
convert them to .tar.md5 using Odin 3.07 by mkh.mourad you mentioned
flash the older bootloader (using Odin 3.09)
use towelroot
install superSU and verify using Root Checker
flash the new bootloader (using Odin 3.09)
For convenience, I've uploaded the Odin-compatible stock bootloaders I used here (can't link them as this is my first post on this forum):
The current one (I9515XXU1ANI3): https://mega.co.nz/#!cgECARKK!mVpGXgXTeHDiQpQCKrTimBHbxy1R067L3I51VtwsptY
The older one (I9515XXU1AND3): https://mega.co.nz/#!Zh1jVaJI!0yJ6aYqsFnXMwxRSN-GAqo8iKFS2YfVx6hHcCT0VYUI
Disclaimer: As I'm a beginner, I've already tripped the Knox counter before I used that strategy (flashed the bootloader you posted from the Galaxy S4 Mini), so I could not verify that this strategy doesn't trigger it. Logically, it should not trigger it.
Unfortunately, there currently seem to be no custom ROMs for the GT-I9515 as it's just a "value edition" with different touch screen, wifi, etc.

I have bought a used phone in germany, but the OS seems to be a France version:
PDA: I9195XXUCNK1 CSC: I9195OXXCNK1
It does not matter, I can use german language. But would I be able switch to a german ROM without affecting KNOW?
For first: I want to root to get access to SD card. So I stay on the currentl installed FW for first.
Thanks, Yours Simon

hanswurst07 said:
I have bought a used phone in germany, but the OS seems to be a France version:
PDA: I9195XXUCNK1 CSC: I9195OXXCNK1
It does not matter, I can use german language. But would I be able switch to a german ROM without affecting KNOW?
For first: I want to root to get access to SD card. So I stay on the currentl installed FW for first.
Thanks, Yours Simon
Click to expand...
Click to collapse
Sir,
If you flash stock firmware, no matter country, you will not have any problems with warranty or KNOX.
Just be carefully and do a backup before all.
Regards

Nice !
But too late for me,I have already 0x1.
Is there any option to revert this thing ?

RobinNet1 said:
Nice !
But too late for me,I have already 0x1.
Is there any option to revert this thing ?
Click to expand...
Click to collapse
If you're from EU, it doesn't matter...

S3miniFin said:
If you're from EU, it doesn't matter...
Click to expand...
Click to collapse
Why? I'm in EU (Croatia) and the warranty is void if you have KNOX tripped.

Bullet92 said:
Why? I'm in EU (Croatia) and the warranty is void if you have KNOX tripped.
Click to expand...
Click to collapse
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu
http://forum.xda-developers.com/showthread.php?t=2447832

S3miniFin said:
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu
http://forum.xda-developers.com/showthread.php?t=2447832
Click to expand...
Click to collapse
Thanks.. I'll check with Samsung Croatia and the region distributor if the warranty is void if KNOX is tripped.

Ok,good news & thank you !

Bullet92 said:
Thanks.. I'll check with Samsung Croatia and the region distributor if the warranty is void if KNOX is tripped.
Click to expand...
Click to collapse
Ok, I've checked with all distributors (3) and directly with Samsung Croatia and all off them had the same answer. Your warranty is void if you have KNOX tripped.
That doesn't mean all over EU is like in my banana country but just first check with everyone before you touch your KNOX flag.
KNOX warranty void was the reason why I bought LG G2 now and going to sell S4Mini. Enjoy guys and again, if you're planning to change the K-flag, check everything about warranty conditions in your country.

Hi,
Do you check Autore boot and F. Reset Time?
Thx

I have a question for my friend : Flashing newest ROM with Odin (with check the box F Reset Time), without root the phone,Knox will be triggered and he lost the warranty ?
Knox warranty at this moment it is 0x0.
Thank you,

RobinNet1 said:
I have a question for my friend : Flashing newest ROM with Odin (with check the box F Reset Time), without root the phone,Knox will be triggered and he lost the warranty ?
Knox warranty at this moment it is 0x0.
Thank you,
Click to expand...
Click to collapse
If he flashes a stock rom via odin it won't trip knox.
Only rooting a device triggers knox to 0x01

thnx, working ok

I get an error
I get an error which is this: <ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help?

Rooted Samsung Galaxy S4 GT-I9195 (UCNJ6)
Thank you very much!!!
With your strategy I have successfully rooted my Samsung Galaxy S4 mini with the newest firmware I9515XXUCNJ6.
KNOX is like before root!!!

phedra61 said:
Thank you very much!!!
With your strategy I have successfully rooted my Samsung Galaxy S4 mini with the newest firmware I9515XXUCNJ6.
KNOX is like before root!!!
Click to expand...
Click to collapse
Which firmware do you put on your phone? I tried with the last 4.2.2 firmware (got iti on sammobile) but it doesn't work. odin said: FAIL! Can you link me the firmware you used? I already got the latest 4.4.2 firwarre, odin3.10, device's drivers.

WORKED!Thank you so much.!

[Q&A] [ROM][4.3][E2][SM-G7102][GRAND2] GenNxt Pre-Rooted Stock

Q&A for [ROM][4.3][E2][SM-G7102][GRAND2] GenNxt Pre-Rooted Stock
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.3][E2][SM-G7102][GRAND2] GenNxt Pre-Rooted Stock. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Missing applications
Hello guys - need help.
I have flashed by odin GenNxt_Advanced_E2 but im missing google play, wifi and gps notification in upper "status bar"...When i try to add google account i can't since google account option is not available (only samsung, Facbook an twitter accounts are available)...What could go worng? There are too many missing things so definitely it is not a bug of the rom - but dont know what could i do worng?
Also i have noticed now that i can use 3G on sim card 1 while on original 4.3 rom i used 3G on sim card 2 - too many strange things but dont know where to start from...

can installing of new rom in galaxy grand 2 v4.3 will replaced lost app??
good mam/sir
I am new in this rooting procedure so i accidentally root my galaxy grand 2 v4.3 using a wrong root procedure, then my galley application went not responding it says (com.sec.android.gallery3d is not responding). when i get root access i thought it may come back but suddenly it stays the same. so now i am wondering if it is possible to get back the gallery app by flashing a new rom in my device.
Please helm me..
Thanks to balliboxer..

Hi all!
I just get a new grand 2, so i'm very noob. i hope u guys can help me to answer some questions below:
-First, My grand 2 is running 4.4.2 but i feel it is very hot. performance is poor in web browser.some lag when pull down notification panel. Stand by time is suck. With the same process, Moto G is much better and doesnt get hot.
So, is the problem related to Rom? if i downgrade to 4.3, will it be better? ( I heard that 4.4.2 rom is suck with many errors)
- Second, i just want to know that if i can run this Rom or not? Cause my grand 2 is totally "virgin". Will flashing this rom via Odin be ok?
Thks for answer and help !

hii... i m trying to flash genext s5 zip on my rooted grand 2 via cwm but it faild... how to flash it plz help.... i m new in this field so elobrate it for me ?

I'm not a robot
hey bro after doing every thing just as you have posted in the post,and flash with your updated rom and everything my phone is just showing me the starting screen only. i have waited for 4 hours but nothing is happening what should i do????

Hello
I am on 4.3 Jb g7102ztuang1...can I flash this rom???
And any bugs in this rom?? Like wifi ... dual sim... messaging. . Call camera? ?
Any thing which is not working perfect. ..
Waiting for ur good reply
Thanks

hi
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GenNxt_Advanced_E2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what to do now?

why does it tells me it fails all the time i did all the steps but the odin tells me fail

hi
Balli bro I flashed this rom
But it makes onlh one change and that it roots my mobile but nothing else....what should I do now.....it becomes to hot after a little use....Please give me solution
M waiting for ur reply

Grand 2
i am using custom rom based on android kitkat 4.4.2
can i install this rom

Anyone knows how to move the clock to the stock position? Thanks
Sent from my Note3

thank you
Thank you but not downlod

i can't install
Sir my name is sushil and i am trying to install but i can't can u help me my phone is root i use ur 1st rom but this time i can't
plz help me or if possible plz upload video

Plzz help I want install it but Odin give error plzzzzzzz help
Sent from my unknown using XDA Free mobile app

im not able to flash this rom
i did it everything according to the instructions ...
i was using gennxt s5 project rom ..
n nw i flashed this rom..
shud i hve to flash this rom while using stock rom or is it ok if i flash this on to gennxt S5 rom??

can i use this rom after cm11..do degrading cause any problems..rply pls
---------- Post added at 04:38 PM ---------- Previous post was at 04:29 PM ----------
sapycool0 said:
i did it everything according to the instructions ...
i was using gennxt s5 project rom ..
n nw i flashed this rom..
shud i hve to flash this rom while using stock rom or is it ok if i flash this on to gennxt S5 rom??
Click to expand...
Click to collapse
wats the error msg shown bro..

I Stuck in boot logo
I Stuck in boot logo what should i do?

What is n4 rom?
Sent from my SM-A500H using XDA Free mobile app

Hi
1st of all i have to say thnk you very much for your work, it's the best rom that i have tested in my G7102,
but there is some bugs that is annoying me, so please somebody help .
1- My Snote app starts correctly but when I select the account to It closes.
2- In Action Memo App I have the same problem it starts correctly but when is touch the plus icon on right up corner it closes too.
3- In activity zone app when I press the exercise It stops working.
4- My SNS app does not work correctly when it wants to have access to my twitter of facebook acccount for example it says login failed please try later.
All other apps work smooth and correct.
So please help me.
thanks

[Q&A] [Stock Rom] [Odin] [Firmware Packages] Odin Flashable Firmware Packages Re-Upl

[Q&A] [Stock Rom] [Odin] [Firmware Packages] Odin Flashable Firmware Packages Re-Upl
Q&A for [Stock Rom] [Odin] [Firmware Packages] Odin Flashable Firmware Packages Re-Uploaded
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Stock Rom] [Odin] [Firmware Packages] Odin Flashable Firmware Packages Re-Uploaded. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

original firmware samsung gt-s5360
hey guys i need help for the firmware of samsung gt-s5360...show were i can download them please. thanks

Closed on original OPs request.

Question
I used this firmware
" Indonesia, Malaysia, Philippines,
Singapore, Vietnam
S5360_DXMJ1_OLBMJ1_DXMI1_wipe_by_SplitFUS2"
why screencapture is disable ... how to add SC on this frame?
---------- Post added at 12:14 PM ---------- Previous post was at 11:50 AM ----------
i was try.... but still not working ... before it i use jellyblast i can do sc
i lost screencaptureservice.apk on my System/App when im flashing with this frimware.....

thanks
i just wanna thanks for this use full post, i just a newbie, then now i know how to repair my phone

Worked like a charm
Thank you so much and it saved me from discarding my phone. Now my phone got life.
Can i go for custom rom installation now? previous problem came becase of it only

Galaxy y GT-S5360 downgrading(?) to Stock rom
Just wanted to say BIG thank you to both developers for their kindness of providing firmware, USB download link, concise instructions, and numberless clues in the thread... I just un-bricked my phone as per your instructions and it works!!! Cheers guys!

Sir i need latest firmware with urdu langunge supported for samsung galaxy y s5630 please help me....

Will it unroot the phone?
Does flashing stock rom using odin unroot the phone?

flash without unrooting phone
How can we go back to the original rom without unrooting it??

switching from hyperion 9 gm final build to creed v4 build mess up....
hello!
based in many reviews, my curiosity tickled me to try the creed v4 rom in my gt s5360. but i am in a hyperion 9 gm final build.. after getting a fixed zip i follow the steps in flashing via cwm but i am stuck in the creed logo. i tried to wait after the creed logo is a black screen but it only goes back to he creed logo ..
i tried to re-install the rom but the result is the same and i also do the system reset but still no good news. i tried to restore my backup rom but mount..failed..invalid argument..
another thing i tried was install the hyperion then restore my files, luckily it was a success and then, i tried to install the creed back..but same result.
now i am still having problems flashing stock rom via odin..
i just flash the pda..i am doing it wrong?
badly need help!...
another thing, does my kernel percy based in my hyperion is not supported in creed v4? ... i am totally confused now (still flashing stock rom)....
please help!...
sorry for not being a fast learner but my eagerness and curiosity to customize my phone brought me to this mess.

not get flashed
i want help i flashed my samsung galaxy y young s5360 using odin but mistakely repartition was not unchecked now my phone wont start up and also not flashed by odin plz help it showing the following erorr
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
please help

i have problem after flashing my SGY gt-s5360 La Fleur Edition,
after format with ext4 formatter, and flashing kernel with cm7 build 4 totoro,
i can't use touch screen feature and i can't mount system/data/cache,
please, help me!

Thank you!
Thanks man! I really needed this package!

can i post it at my blog ???
i will put your name on it...

Wait
is the old firmwares are the stock???

Downgrade from Lollipop to KitKat to Jelly Bean for Root to Lineage OS -Please Assist

I recently received a Galaxy J7 over the Holidays which works fine as a daily driver with stock Android Oreo. However,it doesn't have NFC capabilities which means I can't utilize Google Pay at the register during this Global COVID-19 Pandemic to avoid having to touch the checkout keypad to enter the PIN. Also, the functionality in Android 5.0.1 Lollipop just doesn't compare to Android 8.0 and it'd be awesome to have Lineage OS 17.1 which is based on Android 10 Q for so many different reasons.
I recently found an old Galaxy S4 SGH-1337 jflteatt for AT&T - this phone does have NFC capabilities which is great, but has a locked bootloader as it is on Android Lollipop 5.0.1.
I started a Project to go from Android Lollipop 5.0.1 to Lineage OS 17.1 The aim is to downgrade from Android Lollipop 5.0.1 to Android Jelly Bean 4.2.2 which has the unlocked I337UCUAMDB bootloader which I can then root and install Lineage OS 17.1 .
I was able to downgrade Android Lollipop 5.01 to Android KitKat by flashing the stock Android KitKat 4.4.2 firmware via Odin3 v3.12.
However, when I tried to flash the stock Android Jelly Bean I received the SW REV Check Fail Fused: 5 Binary: 1 and the below from Odin3 v3.12:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
Thru researching online, it seems the error is caused because the firmware on the phone is newer than the firmware that is trying to be installed.
But that doesn't make sense as I was able to downgrade firmware from Android Lollipop 5.0.1 to Android KitKat 4.4.2. I'm not certain what I'm missing. I was able to find this video which seems to have the fix but I don't know the language and there's no download links for the files that are utilized.
Video Title: Samsung SW REV CHECK FAIL Solution | By Sagar Mobile
I would greatly appreciate any assistance that you can provide as I've been working on this project for almost a week now and invested so many hours already into it and I believe I'm just so so close to success.
Thank you so much, and stay safe out there during these trying times.

your bootloader is preventing the downgrade.. afaik it won't be possible to revert back to 4.2.2, unbranded devices included.
also, i think 4.2.2 is pre-mendatory-knox. for that fact alone, i think the bootloader won't allow you to go below 4.4.2.
in general, at&t branded S4s are not the ones you want...

7adm said:
your bootloader is preventing the downgrade.. afaik it won't be possible to revert back to 4.2.2, unbranded devices included.
also, i think 4.2.2 is pre-mendatory-knox. for that fact alone, i think the bootloader won't allow you to go below 4.4.2.
in general, at&t branded S4s are not the ones you want...
Click to expand...
Click to collapse
Thanks for your response, which is in line with the research that I've been doing. With this stock firmware, I can't downgrade past 4.4.2. Oh well... it seems the only option I have left is to buy an unlocked phone that already has the stock 4.2.2 firmware that I'm after. Only thing is, they all say "unlocked to work with any GSM carrier, not for CDMA carrier."
If I were to buy this phone, would it be possible to utilize on AT&T which is a CDMA carrier [the research I did said yes and no] and is it a guarantee that the Android 4.2.2 firmware would have either of the unlocked bootloaders: I337UCUAMDB / I337UCUAMDL that I should be able to root and install Lineage OS...

Regarding COVID-19, wear gloves as the J7 runs circles around the S4.
That said, if you really want a Galaxy S4, the best models available to you are as follows:
SGH-I9505G (Google Play US model)
SGH-I337M (Canada)
SGH-M919 (T-Mobile)
Under no circumstances would I recommend an AT&T model, nor would I recommend a Verizon model. Both carriers lock their bootloaders to prevent you from doing what you're attempting. However, developers here on XDA released Safestrap, a recovery that bypasses the locked bootloader by dedicating a portion of the device's internal storage to the Android system. In effect, you have two systems on the device.
AT&T uses GSM. Verizon used CDMA, but as of 2020 that may no longer be the case due to their 3G network being shut down. Regardless, it's unlikely you will find a device of the S4's vintage that hasn't been upgraded from Android 4.2.2. You would be better served looking for one of the recommended Galaxy S4 devices in the short list above or, even better, getting a newer device with an unlockable bootloader, like the Nexus 5X, Pixel, Pixel 2, or Pixel 3a.

Strephon Alkhalikoi said:
Regarding COVID-19, wear gloves as the J7 runs circles around the S4.
That said, if you really want a Galaxy S4, the best models available to you are as follows:
SGH-I9505G (Google Play US model)
SGH-I337M (Canada)
SGH-M919 (T-Mobile)
Under no circumstances would I recommend an AT&T model, nor would I recommend a Verizon model. Both carriers lock their bootloaders to prevent you from doing what you're attempting. However, developers here on XDA released Safestrap, a recovery that bypasses the locked bootloader by dedicating a portion of the device's internal storage to the Android system. In effect, you have two systems on the device.
AT&T uses GSM. Verizon used CDMA, but as of 2020 that may no longer be the case due to their 3G network being shut down. Regardless, it's unlikely you will find a device of the S4's vintage that hasn't been upgraded from Android 4.2.2. You would be better served looking for one of the recommended Galaxy S4 devices in the short list above or, even better, getting a newer device with an unlockable bootloader, like the Nexus 5X, Pixel, Pixel 2, or Pixel 3a.
Click to expand...
Click to collapse
Thank you for the listing of the phones, I'll definitely look into them if I can't obtain a 4.2.2 firmware S4. It's interesting that you mentioned Safetrap, as I definitely did focus on in while researching in the XDA forums and web due to the locked bootloader issue ...but everything I found said that it's not compatible with AOSP ROMs and is only compatible with TouchWiz ROMs.
Is Lineage OS an AOSP ROM... if so I can finally complete this project...but I'd like to be fully certain before I take that leap of faith.

Dayus999 said:
Is Lineage OS an AOSP ROM... if so I can finally complete this project...but I'd like to be fully certain before I take that leap of faith.
Click to expand...
Click to collapse
LineageOS is based off of AOSP, so if Safestrap doesn't like it, then you know what not to get.