[Q] D803 Rom Questions - G2 Q&A, Help & Troubleshooting

Hey guys I'm just a bit confused the D803 version. The following link says that any Rom (as long as its for some variant of G2) can be installed on to D803 but you have to flash one of the provided kernels with it. Is this accurate? I'm very stumped because I believed that there were a few Roms which needed the script to be re-written (need help with that as well.) Are there Roms which are absolutely incompatible with G2?
http://forum.xda-developers.com/showthread.php?t=2611749

D802 ROMs can be installed on the D803 without issues. Just be sure to flash a D803 kernel before boring the first time.
I've successfully run SlimKat D802 version on my D803 with dr87's kennel.
However, there's a whole shwackload of ROMs specifically for the D803, so why would you need to flash anything else? Just browse the LG G2 Original Android Development forum and LG G2 Android Development forum.
Typos courtesy of my LG G2 (D803) running SlimKat.

Oh ok thanks! I know that there quite alot but im a former gnexus user whose used to almost every ROM available lol.
Just wondering, would I be able to use a D801 ROM with a d803 kernel? Also do I only need to install the kernel once?

You need to install the kernel anytime you install a non-D803 ROM.
Anytime you wipe/format the /system partition, you need to install the kernel.
Typos courtesy of my LG G2 (D803) running SlimKat.

I'm trying to install the latest mahdi build for d803 but i keep getting a updater script failure. I'm using the right rom and even the right patch. I need help

zeon9881 said:
I'm trying to install the latest mahdi build for d803 but i keep getting a updater script failure. I'm using the right rom and even the right patch. I need help
Click to expand...
Click to collapse
First download and install Notepad ++
Open the Rom.zip with winrar, and look for the updater-script file. It should be in Meta-Inf>Com>google>Android and there. Double click the Updater Script file so that it opens, and delete any lines before the "Mount" line.
Save it, pass it to the phone, and flash and it should work
If it doesnt, redownload the file

Related

Help with CM 10.2 on D803 LG G2

Hello, I'm new to these forums and this is my first android phone. Unfortunately for me I got the Canadian version which really lacks a lot of development for my LG G2 variant. I was wondering if anybody could help me with installing Cyanogenmod 10.2 on my D803 Canadian version since it's not supported. Is there anyway I can flash this custom ROM or any ROMs that aren't supported for the Canadian variant? Because maybe I'm just a noob but I can't seem to get the D800 or D802 variants to work with my phone. Please someone help me out, maybe I can get a guide how to install CM 10.2 or custom ROMs similar to it that don't yet support my variant. Thanks.
ripper614 said:
Hello, I'm new to these forums and this is my first android phone. Unfortunately for me I got the Canadian version which really lacks a lot of development for my LG G2 variant. I was wondering if anybody could help me with installing Cyanogenmod 10.2 on my D803 Canadian version since it's not supported. Is there anyway I can flash this custom ROM or any ROMs that aren't supported for the Canadian variant? Because maybe I'm just a noob but I can't seem to get the D800 or D802 variants to work with my phone. Please someone help me out, maybe I can get a guide how to install CM 10.2 or custom ROMs similar to it that don't yet support my variant. Thanks.
Click to expand...
Click to collapse
I managed to get 10.2 working on my d803. I'm not 100% sure, but almost, that used this kernel, by Houston:
EDIT: turns out I can't post link... search for Houston's kernels (Paranoid Android 4.4.2 beta thread) and use the d803 AOSP kernel.
and the stable d802 release of CM 10.2.
Used TWRP 2.6.2.2 I believe. I'm now using 2.6.2.4 to restore when I switch to my LG UI backup, no issues.
ParanoidAndroid
ripper614 said:
Hello, I'm new to these forums and this is my first android phone. Unfortunately for me I got the Canadian version which really lacks a lot of development for my LG G2 variant. I was wondering if anybody could help me with installing Cyanogenmod 10.2 on my D803 Canadian version since it's not supported. Is there anyway I can flash this custom ROM or any ROMs that aren't supported for the Canadian variant? Because maybe I'm just a noob but I can't seem to get the D800 or D802 variants to work with my phone. Please someone help me out, maybe I can get a guide how to install CM 10.2 or custom ROMs similar to it that don't yet support my variant. Thanks.
Click to expand...
Click to collapse
Try Paranoid Android 4.2-BETA3 Android version 4.4.2.... this work pretty fine on my canadian LG G2 D803

D802 custom install

I have seen this rom in the Tmobile section
http://forum.xda-developers.com/showthread.php?t=2598361
can this be installed on a D802 only by flashing the right kernel? maybe one like this?
http://forum.xda-developers.com/showthread.php?t=2566081
/Otto
that PAEK kernel is for CM & PA only, not for stock LG rom

Just went from i9505 to LG2

Hello
I have switched from Samsung s4 mobile to G2..
Just have one quick questions about the custom roms.
In the G2 Android Development thread there are different roms... And in the also in the G2 Android Development (D802) there are roms...
I have the LG-D802 model, so I can just install the roms from the D802 thread?
And maybe a quick tip about a rom witch gives almost stock experience but no bloatware...
On my S4 I made a bloatware script deleting 180 apps/and APK files...
mr.lysgaard said:
Hello
I have switched from Samsung s4 mobile to G2..
Just have one quick questions about the custom roms.
In the G2 Android Development thread there are different roms... And in the also in the G2 Android Development (D802) there are roms...
I have the LG-D802 model, so I can just install the roms from the D802 thread?
And maybe a quick tip about a rom witch gives almost stock experience but no bloatware...
On my S4 I made a bloatware script deleting 180 apps/and APK files...
Click to expand...
Click to collapse
You can flash any rom thats for D802. no matter what forum its from.
most clean is ParanoidAndroid or CM

[Q&A] [GUIDE] How to install CloudyG2 3.1 (D802) + MOD

Q&A for [GUIDE] How to install CloudyG2 3.1 (D802) + MOD
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] How to install CloudyG2 3.1 (D802) + MOD. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Soo...
I got a bit confused. If I come from the G4 Rom by Cheloz should I flash only the Cloudy rom or I need the debload patch too?
Thanks
taiki3ro said:
I got a bit confused. If I come from the G4 Rom by Cheloz should I flash only the Cloudy rom or I need the debload patch too?
Thanks
Click to expand...
Click to collapse
Debloat is MOD .Doesn't patch. You should flash rom only if doesn't want to use mod.
Sent from my LG-H818
Thanks a lot
I realized that i might need to reflash cloudy rom. You are the man, now its easy.
Thanks a dozen!
the patch did not work
i'm using d802 and I got bootloop when install cloudyG3 from Lollipop. Then I go back to kitkat then follow the instruction. However the bootloop is still here. I don't know what happen, maybe because I installed the D802T Auto Rec file?
sjeunhanz said:
i'm using d802 and I got bootloop when install cloudyG3 from Lollipop. Then I go back to kitkat then follow the instruction. However the bootloop is still here. I don't know what happen, maybe because I installed the D802T Auto Rec file?
Click to expand...
Click to collapse
Sure. I have to correctly install custom recovery that is my recommend. I comfirm 100% If you follow by my instruction it working
Sent from my LG-D802 using Tapatalk
I have kdz to 5.0 and download your twrp version and do exactly the instruction and it is still not working. I don't know where I missed
ohh crumbs.
I can't install cloudyg2 3.1 because my screen is broken. I can use a mouse with an otg cable to control TWRP but as soon as I begin installation it goes to a fancy ui that doesn't support my mouse pointer. If I click it only opens the 3 dot menu. Can't use hardware keys either. Gutted.
i am using optimus g3 kitKAt on d802
I CAN USE THIS METHOD TO INSTALL CLOUDY G2 3.1??
AND THE V2.8.5.1 OF TWRP IS OK??
PLZ HELP ME ??
Just to make sure - can I install your mod after using CloudyG2 for some days? Will it simple remove some apps?
Is the list of debloated apps similar to your own ROM? Just came from Kra-Pow-Moo-Sab but have to admit I prefer Cloudys ROM
Hai somboons,
In video, you use KITKAT.
My device is G2 16GB with lolipop 5.0.2. I update it via LG PC suite (not yet rooted)
If i want to install cloudy 3, what step should I do? Can I use in page 1?
In page one, I use "Coming from kitkat / Lollipop ASOP " or "Coming from Lollipop (Stock Custom ROM)"
sorry so many ask. I am newbie in this topic
Thanks in advence
Coming from CG2 2.2
Dear somboons,
Currently i'm using cloudyg2 2.2 in my G2, that i believe still Kitkat. Based on my understanding, even it's not aosp, i still can use your method (flash the patch) to upgrade to CG2 3.1, right?
LS980
i have a problem that i get a blank black screen on booting, do you have any suggestions?
Suggestions
I have install cloudyG2 3.1.
IMHO,
For next update, maybe the NAVIGATIONAL / NOTIFICATION BAR (upside) can make bigger. IMHO, it's too small
bar for HOME TOUCH BUTTON make bigger because it's too small to.
And the volume is so small. maybe you can make it louder for next update.
Can't wait for the next update
Thanks
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
AguzBudiarta said:
i have a problem that i get a blank black screen on booting, do you have any suggestions?
Click to expand...
Click to collapse
I have that problem too. Maybe it is called bootlop CMIIW
I take the step http://forum.xda-developers.com/showthread.php?t=2687768 but your LG will back to 4.2.2 JB.
It's okay, more important, you can use your device again
Noobquestion:
Sorry i dont understand. I have official Lollipop Rom for LG G2. Do i have to use method 1 (Coming from kitkat / Lollipop ASOP) or method 2 (Coming from Lollipop (Stock Custom ROM) ) ?
JKDO said:
Sorry i dont understand. I have official Lollipop Rom for LG G2. Do i have to use method 1 (Coming from kitkat / Lollipop ASOP) or method 2 (Coming from Lollipop (Stock Custom ROM) ) ?
Click to expand...
Click to collapse
I'm from lollipop ROM official too..
use method 1 (kitkat / lollipop ASOP) but I suggest root with one-click root. My device can't be rooted with towelroot.
Help.
I tried using your method to install CloudyG2 v3.1 coming from CloudyG2 v2.2 (KITKAT).
Yes, I'm on D802 - International Version currently.
Problem I'm facing: I followed your exact step-by-step tutorial in your first post.
After a successful rom install, I click reboot into system but after a few seconds the LED flashes with the LG logo then it goes blank and the LG logo re-appears and I get booted into TWRP again.
I went back to KitKat with my nandroid backup in TWRP which I had luckily made.
What I exactly did:
[Please note I was on TWRP v2.8.5.1 before flashing the TWRP bump.]
1. Flashed the TWRP Bump (GO TO LP V1.1 droidth.zip)
2. Rebooted into recovery.
3. Wipe - Dalvik Cache, Cache, Data, System.
4. Flashed CloudyG3v3.1.zip
5. Rebooted system.
Then, I get rebooted into TWRP after a few seconds.
I hope you can help me as soon as possible, somboons.
Regards,
SpaceXTheClockMaster.
Stuck at loading Screen
Hi Somboons, I have a stock rooted kitkat and follow your steps in the post. But unfortunately it got stuck at the loading screen. Is there any other alternatives? Thanks
Zip error occur
Hi guys. i have followed steps but when flashing rom in twrp, an error message has shown that E:zip file error occur. What can i do? i couldnt figure out to solve problem
done every thing but it go to fastboot mood and don't want to reboot
i done every thing in the how to install cloudyg2 3.1 to step 4. but now every thing is gone the phone went dark and its go to Fastboot mode. how can i deal with this issue

How do I go from Cloudy G2 2.2 to Bliss?

Hello. I want to try Bliss ROM, but I read that I need to get the latest bootstacks. No idea what that is. Found 30b and 30d versions. Also, I already have installed Dorimanx Kernel, which supports Kitkat only. Will that cause bootloops if I install Bliss (5.1.1), or does it automatically disappear when I wipe my device?
LG G2 d802,
Software version - Optimus G3 V1.4.1 + Dorimanx Kernel
Android Version 4.4.2
TWRP Version v2.7.0.0
Thanks in advance!
** Edit **
I thought people would respond quicker, and became impatient. So I decided to do it by myself.
Installed latest TWRP version, downloaded ROM + bootstack + Gapps, wiped everything, flashed the 3 zip files and it worked out.

Categories

Resources