Related
This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse
KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.
i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate
I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.
Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..
Thx a lot! Worked like a charm! :good:
i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate
ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible
Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D
Hi, i have a lg e400 which i try to root it.
First time ( after bought it) i could root with spectrum, i installed cwm and after ICS. After that i want back to my gingerbread and i installed with KDZ ( got firmware from romania ) and it works.. somehow ( i want mean here, after the kdz installed it had freeze and not responding and windows request me to close it) .. Now after this i can`t root again with spectrum, i tried with super one click, i tried to install another firmware with kdz ( but the same problem, it freeze and windows requires to close it ) and after that i can`t root
At super one click freeze and stay in this situation hours
At KDZ you have attachement
I have now android version 2.3.6
Build number: GRK39F
Software version: V10k-AUG-08-2012
Baseband version: MSM7225A-1-AA
Kernel Version:2.6.38.6-perf
Hey there, I feel your pain! Trust me hun 've been searchinfg forever and a day and 3 days ago I FINALLY rooted my LG L3 E400! :laugh:
SuperOneCLick will NOT work on our device no matter how hard you bang your head on your keyboard so,
GO here: androidarea51.com and search:"*** ALL THINGS ROOT *** / One Click Root,CWM,Kernel LG Optimus Dynamic LGL38C" (remove quotes)
Follow the instructions you must do a quick register for the forum to view the file though it will tell you that, downlaod it and follow instructions make sure to set time out to 10 minutes , enable USB debugging before you connect and execute the file and go from there. I hope I helped!
oh if you wanted to flash a custom rom (I prefer) after you've rooted successfully: youtube.com/ watch?v= CVT6DLZ9RKk (sorry I can;t post links if you're on Google Chrome or Mozilla or whatever highlight the "lin" to your url bar. Best of Luck to you!
thanks, you just take a bullet from my heart . i will try this method tonight and after that i will edit this post
really hope to work your method
I tried it and now it doesn`t start. It appear the LG logo and nothing.. no loading no LG gif image...
I will put my firmware back and try again..
I don`t understand part with " make sure to set time out to 10 minutes"
Please explain it again
maybe
maybe flashing with the original rom and then trying to root it will help you...
zeg685 said:
thanks, you just take a bullet from my heart . i will try this method tonight and after that i will edit this post
really hope to work your method
I tried it and now it doesn`t start. It appear the LG logo and nothing.. no loading no LG gif image...
I will put my firmware back and try again..
I don`t understand part with " make sure to set time out to 10 minutes"
Please explain it again
Click to expand...
Click to collapse
oh i'm sorry about that to change the time your screen takes a time out go to settings>display> and you will see a "set time-out" option selct it and scroll til' yu see 10 minutes. Make sure you re-read the instructions carefully before you try it again. I hope it woeks again.
nope
rootjunike said:
oh i'm sorry about that to change the time your screen takes a time out go to settings>display> and you will see a "set time-out" option selct it and scroll til' yu see 10 minutes. Make sure you re-read the instructions carefully before you try it again. I hope it woeks again.
Click to expand...
Click to collapse
nope, doesn`t work and i broken my phone with your method (from 1 post)
I hade do a factory reset and then i could root it
Hi everyone, I hope you can help me with this problem. I'll give you all the details I can remember.
About two days ago, I flashed the Latte rom on an E400g and something went wrong. I used the instructions for the sdmerge version (wipe all, flash step 1&2, then the rom) but when I tried booting it up, it went into an infinte loop. I read that I needed to flash an official firmware using kdz updater, but I couldn't find a working link anywhere (they are either broken of stop at the incorrect file size... the files are supposed to be about 150-160mb but they stop downloading at 2mb or 48mb for example, so I haven't even tried using them). After looking some more, I found a post on a blog that said that I could flash a stock rom and then use the PC Suite to update. So I did, but now it wont past the boot logo. Also, I can't access recovery anymore, I suppose it got deleted when I flashed the stock rom.
So now, as I understand it, my only option now is to put the phone in emergency mod (that works, already tried), and flash the official firmware using kdz updater. Problem is, as stated above, that I cant find a good link for dowload - or at least I think they aren't good because of the size of the files. What can I do, is there a working source for downloading the firmware that you know of? Or maybe someone has a firmware I can use and can upload it?
Thank you all for any help you can give me!
Long story short, I deleted my backup rom (Don't ask Please cause I already know)
I am running TWRP 2.6.3.2 and it does NOT let me install any rom (4.3 or 4.4) I constantly get the error (Error executing updater binary in zip) for every rom zip I have downloaded.(AOKP)(PA)(CM 11) etc...
I've tried the Return to stock guide http://forum.xda-developers.com/showthread.php?t=2432476 in General Discussion, and I consistently get stuck @ 49% when restoring the firmware.
I also cannot get the LG Mobile support tool to download a new firmware for the phone itself.
I do have access to sideload via TWRP but it is useless because every rom gives me an error.
Do I have any options left or do I just call it a week and enjoy my $600 paper weight?
Please any help would be much appreciated!
LG G2 for T-Mobile (D801)
Esteef said:
Long story short, I deleted my backup rom (Don't ask Please cause I already know)
I am running TWRP 2.6.3.2 and it does NOT let me install any rom (4.3 or 4.4) I constantly get the error (Error executing updater binary in zip) for every rom zip I have downloaded.(AOKP)(PA)(CM 11) etc...
I've tried the Return to stock guide http://forum.xda-developers.com/showthread.php?t=2432476 in General Discussion, and I consistently get stuck @ 49% when restoring the firmware.
I also cannot get the LG Mobile support tool to download a new firmware for the phone itself.
I do have access to sideload via TWRP but it is useless because every rom gives me an error.
Do I have any options left or do I just call it a week and enjoy my $600 paper weight?
Please any help would be much appreciated!
LG G2 for T-Mobile (D801)
Click to expand...
Click to collapse
You sure? I just did it successfully. Did you download the correct firmware?
back too stock
Il always yuse lg mobile support. Il start by geting lg g2 ind download mode, power and vol +
When my phone is ind download mode i conect it too the computer and start the lg mobile support
Press options and upgrade it works for me
Esteef said:
Long story short, I deleted my backup rom (Don't ask Please cause I already know)
I am running TWRP 2.6.3.2 and it does NOT let me install any rom (4.3 or 4.4) I constantly get the error (Error executing updater binary in zip) for every rom zip I have downloaded.(AOKP)(PA)(CM 11) etc...
I've tried the Return to stock guide http://forum.xda-developers.com/showthread.php?t=2432476 in General Discussion, and I consistently get stuck @ 49% when restoring the firmware.
I also cannot get the LG Mobile support tool to download a new firmware for the phone itself.
I do have access to sideload via TWRP but it is useless because every rom gives me an error.
Do I have any options left or do I just call it a week and enjoy my $600 paper weight?
Please any help would be much appreciated!
LG G2 for T-Mobile (D801)
Click to expand...
Click to collapse
Can you get into download mode? If so, the LG Mobile Launcher should work. Make sure you have the latest drivers downloaded from LG. It should also be in the thread about using the Mobile Launcher. I couldn't get it to work at first because I didn't install the latest drivers. Just plugging in the phone to your PC won't do it. Also, if you do get it to work, the firmware that will be installed will be d80110g, not d80110c that came with the phone. There is no info about this version other than the thread I started about it. Code Hustler tweaked ioroot to root this version and it is in the thread. Just search "T-Mobile software update" in the general section if you do get it installed. Good luck!
Sideload the latest twrp recovery and then pick your rom and retry make sure you are correctly wipeing systen dalvik and chache
tumebone said:
Il always yuse lg mobile support. Il start by geting lg g2 ind download mode, power and vol +
When my phone is ind download mode i conect it too the computer and start the lg mobile support
Press options and upgrade it works for me
Click to expand...
Click to collapse
Whenever I try to use the upgrade, it never even asks me for my IMEI , it says stuck displaying: Downloading software, but it never downloads anything. It could be a driver issue. There is just so many links on here maybe I really haven't installed the correct drivers??
Any links to drivers that works would be very nice if possible!
Howie Dub said:
Can you get into download mode? If so, the LG Mobile Launcher should work. Make sure you have the latest drivers downloaded from LG. It should also be in the thread about using the Mobile Launcher. I couldn't get it to work at first because I didn't install the latest drivers. Just plugging in the phone to your PC won't do it. Also, if you do get it to work, the firmware that will be installed will be d80110g, not d80110c that came with the phone. There is no info about this version other than the thread I started about it. Code Hustler tweaked ioroot to root this version and it is in the thread. Just search "T-Mobile software update" in the general section if you do get it installed. Good luck!
Click to expand...
Click to collapse
Where did you get the latest drivers from?? Maybe I don't have the "Latest Drivers".
Where did you get the latest drivers from?? Maybe I don't have the "Latest Drivers". [/QUOTE]
I cant post outside links, but go to google and search d801 usb driver and download it from lg site
Try install and tell me if it solved your problem.. Otherwise ill help you getting it solved.
ill keep an eye on this post..
Problem Resolved / My Solution
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers.
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Well, good to hear that your phone works again... I see CM nightly has some TWRP install script in lastest build, and a TWRP version for CM 10.2 and CM11...
http://forum.xda-developers.com/showthread.php?t=2553199
But take your time to read through topic..
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?