Database Users

REQUEST: Stock Recovery Image For Verizon Galaxy Tab 10.1

Can someone please assist me and provide the stock recovery image for the recently released Galaxy Tab 10.1 with LTE on Verizon? I tried to flash CWM 4.0.0.4 to the device via ODIN3 (didn't do a backup first) and it messed up the recovery image. The tab can boot fine and I can get into "Download Mode" but when trying to get into recovery mode I just get a blank screen.
Any help would be greatly appreciated.

Welcome to the club, I have been working on the same problem. I think it has to do with fastboot.
I am rooted on LTE Tab, works great except no recovery.

Well, glad to know I am not the only one. How did you verify that you got "root"? I was under the impression that the ODIN3 application would do everything all in one go, but even now upon launching anything that says it requires SU privs I get an error saying I don't have them. Perhaps I am missing something.

I flashed Pershoot's tools dated 5-15 using the stock recovery, that got me root, then I used Odin to flash the CWM recovery file and I lost all ability to go into recovery. I am rooted and can powerdown and restart tab.

once getting the root install rom manager from market and install clockworkmod recovery from it. that's the best way so far.

mughalgxt said:
once getting the root install rom manager from market and install clockworkmod recovery from it. that's the best way so far.
Click to expand...
Click to collapse
Wasn't there was issues with installing CWM from Rom Manager on the US wifi version; I do not recall exactly what those problems were, but I recall reading that it was better to use odin.
The Verizon tablet is a different tablet; afaik it's similar to the captivate / fascinate / vibrant deal, very similar; but different enough to cause issues.

I tried to install CWM with Odin and with ROM manager and neither method worked. I couldnt get the fastboot menu on the verizon tablet before or after root.

would the NVFlash method work?
This is how I got CWM on my wifi unlocked. My understanding is this only works for un-locked tabs; and the verizon one I have here seems to be locked.

Verizon tab appears to be locked, get 04 error using nvflash.

Kicking this one back to the top....
I also rooted and then loaded Rom Manager only to find out that it kills all recovery options on the LTE version.
SOMEONE has to have a new untouched Verizon 4G SGT!

I can't help you with your problem, but i have a question. How can i pull a recovery image? I just ordered a European GT10.1 3G and would like to backup the recovery.img as it seems it's not available online.
I understand that you need to be rooted to get the image? But it's not possible to root without loading a custom recovery?

Same issue... grrr anyone not touched theirs yet?

nagmier said:
Same issue... grrr anyone not touched theirs yet?
Click to expand...
Click to collapse
There is a fix for the recovery on XDA, I have CWM recovery working on my LTE Tab, or do still want the stock recovery?

Same Issue...
I tried the update and recovery is gone. Really need the ODIN image to try and fix this. Was anyone else with this problem running Encryption at the time?

I don't know if I can help, but my Verizon 4G Tab is stock for the most part. I only rooted it. Haven't flashed anything. All I did was put the Samsung_Galaxy_Tab_10.1_root.zip in my sdcard directory, and powered off, powered on while pushing the volume up button, and rooted. So as far as I know, I'm only rooted.

Recovery Image
Hi All,
I was trying to use titanium backup to remove the installed flash from my tablet, unfortunately this operation appears to have affected the bootloader. I get an a failed assertion getprop("ro.bootloader") == "P7100BUKB7". Using odin I was able to put back 3.0 version of honey comb but I can't update the the 3.1 version b/c I get this error.
My guess is that I need to use odin to replace the bootloader. Any ideas on where I might get this. This s the galaxy tab 10.1 wifi only.
Thanks for any help anyone can offer.

Any word on how to get back to bone stock non rooted factory status? I currently have a rooted SCH-I905UKAVZW 10.1 4G LTE with stock recovery. I would like to completely remove root. Does anyone know how to do that?

I've been hoping for a one click odin like on my Captivate. I can't tell you how many times that one click saved me. It's really helpful if you want to mess around without too much worry.

I have run the pda tool within odin.
I have unchecked the usb debugging
I have powered up again to see the (Download droid Icon and the Recovery Icon)
When I select(recovery) the screen with the tab plugged in is still powered on but blank
When I select (recovery) the screen with the tab unplugged goes dark and does not enter recovery to select the root file that was copied onto the (sd card) yes there is not one there but I guess the internal memory has a partition of sorts to be recognized as an sd?
Any help with this??
Also, just for more information...
When you root the 10.1 do you get access to the 4g data network or 3g if 4g is not in our area without "paying" for it?

need help
same problem here after flashing.. my verizon 10.1 4g lte has lost the recovery screen...

[Q] Questions about SafeStrap/Did I screw things up?

Hey, I recently rooted my 4.4.3 ATT Galaxy S4 using towelroot and got a little too excited/didn't do enough reading and tried to install CWM via rom manager like an idiot. Now whenever I boot my phone into recovery it says "No Command" and then "Error" when I reboot. Before I do anything further and potentially brick my phone, I want to ask a few questions.
1. Is it still possible for me to install SafeStrap, and is this a thing that I should even try to do at this point.
2. Did I screw up my phone's recovery/bootloader?
a. Is this repairable, and if not, is there anything I can do to avoid further damage?
3. Is there anything I can do to avoid further damage?
Thanks for your help!

The phone is completely repairable. The stock recovery on the phone is useless for us.
Safestrap is the only working recovery for our phone. It is different from other recoveries as it does not replace the stock one.
You can flash the full NB1 ROM in Odin if you really want to fix this. You really don't need to as the phone will work even without the stick recovery available.
Sent from my SGH-I337 running GPE using Tapatalk

[Q] G870W Recovery

Hello there!
I've successfully rooted my (Rogers) S5 Active / G870WVLU1ANH3 / kltevlactive using CF Auto Root, blowing my knox and all that, works great.
However, I'm now trying to flash either TWRP or CWM Philz for klte (which may have not been to smart come to think about that, but I recall reading it should work just fine) using Odin, and I can't get into recovery. Whenever I attempt to boot into recovery, I end up with "cannot do normal boot".
I recall reading a SafeStrap for G900 works for the G870, but I can't find the thread again, and don't want to just try and see what happens.
I've also tried flashing a recovery using either TWRP app and RomManager, I have yet to try Rashr, but since all the recoveries I've found are for klte, instead of kltevlactive, I'm slightly worried.
I'm not all that new to rooting, but I'm quite new (and upset ) at the Samsung realm, any chance you guys would know what could get me going with a custom recovery?
I also have a Xposed Framework installed, I read it could cause issues with SafeStrap, but I don't suppose it would affect flashing a rom from Odin/whatever else?
My SELinux on the phone claims to be "Enforcing", if that matters, perhaps.
Thanks!

Im having The same issue please help
Sent from my SM-G870W using XDA Free mobile app

Any luck on this? I've scoured the forums with no luck, although I see people mentioning they have it.

I am experiencing something similar. I have a rooted SM-G870W (Bell). I tried both TWRP and CWM recovery.
Every time I tried to go to recovery mode either via pressing button combo or from adb (adb reboot recovery),
my phone goes into download mode instead, I get "Downloading... Do not turn off target" screen.
Have you also experienced some weirdness with your rooted phone? On mine if I go into boot into recovery
(this is without custom recovery), do nothing but select reboot, I will get "System UI stopped working".
Or "unfortunately mtp application stopped" . I re-flashed the phone with the stock OEM ROM and I don't
get the issues I sated above.
BTW, how did you get xposed framework installed. Mine said "not yet compatible with Android SDK 21 "
Thanks
kachnitel said:
Hello there!
I've successfully rooted my (Rogers) S5 Active / G870WVLU1ANH3 / kltevlactive using CF Auto Root, blowing my knox and all that, works great.
However, I'm now trying to flash either TWRP or CWM Philz for klte (which may have not been to smart come to think about that, but I recall reading it should work just fine) using Odin, and I can't get into recovery. Whenever I attempt to boot into recovery, I end up with "cannot do normal boot".
I recall reading a SafeStrap for G900 works for the G870, but I can't find the thread again, and don't want to just try and see what happens.
I've also tried flashing a recovery using either TWRP app and RomManager, I have yet to try Rashr, but since all the recoveries I've found are for klte, instead of kltevlactive, I'm slightly worried.
I'm not all that new to rooting, but I'm quite new (and upset ) at the Samsung realm, any chance you guys would know what could get me going with a custom recovery?
I also have a Xposed Framework installed, I read it could cause issues with SafeStrap, but I don't suppose it would affect flashing a rom from Odin/whatever else?
My SELinux on the phone claims to be "Enforcing", if that matters, perhaps.
Thanks!
Click to expand...
Click to collapse

kachnitel said:
Hello there!
I've successfully rooted my (Rogers) S5 Active / G870WVLU1ANH3 / kltevlactive using CF Auto Root, blowing my knox and all that, works great.
However, I'm now trying to flash either TWRP or CWM Philz for klte (which may have not been to smart come to think about that, but I recall reading it should work just fine) using Odin, and I can't get into recovery. Whenever I attempt to boot into recovery, I end up with "cannot do normal boot".
I recall reading a SafeStrap for G900 works for the G870, but I can't find the thread again, and don't want to just try and see what happens.
I've also tried flashing a recovery using either TWRP app and RomManager, I have yet to try Rashr, but since all the recoveries I've found are for klte, instead of kltevlactive, I'm slightly worried.
I'm not all that new to rooting, but I'm quite new (and upset ) at the Samsung realm, any chance you guys would know what could get me going with a custom recovery?
I also have a Xposed Framework installed, I read it could cause issues with SafeStrap, but I don't suppose it would affect flashing a rom from Odin/whatever else?
My SELinux on the phone claims to be "Enforcing", if that matters, perhaps.
Thanks!
Click to expand...
Click to collapse
I am having the same issue. Any solution?

I had the "cannot do normal boot" issue as well after doing something dumb which stopped me being able to get into recovery. Was about to flash the original firmware but flashed twrp with odin instead after doing some research. Fixed my problem easily, hope this helps.

Same story with mine
Hi There
I'm having the same issue but all they talk about here are 900 and we have G870W
If someone find any information and how to flash the 870 I would be greatfull
to them because all I could find on the internet pertains to the 900 this is infurating
and by the way any of you have that OEM button in developer?
I bet not again all I've been reading on S5 Active also mention about the OEM button
and this is total BS because we don't have a OEM button. If we can find
a site that could help use with our particular phone and not just the 900

Hello, I have successfully unlocked the bootloader and rooted my S5 Active SM-G870W using this guide and carefully following the appropriate links for my device:
https://r2.community.samsung.com/t5...ooting-Your-Phone-and-Flashing-A/td-p/2496038
Now I would like to flash a custom recovery such as TWRP, but cannot find a recommended version for the G870W. Does anyone have any suggestions on where to find one, or know if any of the ones for the 900 would work on the 870? It's a Canadian version of the S5. Thanks for any help anyone is able to provide!

Does anyone know if the instructions for installing Lineage for SM-G870A/F (found here: https://lineageosroms.com/klteactivexx/) would work on my SM-G870W, kltevlactive? How much of a chance would there be it would brick it? Help much appreciated!

Samsung Galaxy S5 (G870A) Bootloop Fix!

I've recently found away to fix a Galaxy S5 Active stuck in a boot loop. (This method only works if your device is on lollipop 5.0! )
Note: This method only works on the OC5 update.
More firmware support coming soon.
What happened: I accidentally made my Galaxy S5 Active get stuck in a boot loop. I couldn't find a solution for the longest time because the bootloader is locked. Time passed and I eventually found away to fix the boot loop if your devices is running Lollipop 5.0!
Solution:
1. You should always try to fix the boot loop by booting into recovery mode by holding down the Home+Volume-Up Key+Power button. Once the phone logo pops up on the screen releases the power button only, but continue to hold the Home+Volume-Up Key. If it worked is should say "Booting into recovery." or something along those lines in blue letters.
Once you're into recovery use the volume keys to navigate Up and Down. Find wipedata/factory reset. Select it with the power key and navigate down to Yes. Wait till it finishes. Then see if that fixed the problem. If not proceed to next step
2. Since the boot loader is locked it's really difficult to flash any kind of Recovery, ROM, or Stock Rom unless your phone accepts it as a valid file. So here's what you do!: (Method 1)
Download this file and save it to your desktop: https://drive.google.com/open?id=0B3UBRFq3BojVQnBSc3lCSzloYUU
Download ODIN v(3.09): http://odindownload.com/Samsung-Odin/#.VgiJ_8tViko - Extract it to your desktop.
Put your phone in download mode. (Note: Before you do this, install the correct drivers for your phone to your computer.)Make sure your phone is completely off and Hold the Home+Volume Down+Power. You will get a warning message just press the volume up key to continue.
Go to desktop and launch ODIN. After ODIN pops up, plug in your device. (Make sure you have the correct phone drivers installed)
You should see a dialog box in ODIN that say 0:[COM6] in blue. Note: It might be different for everyone, just make sure it says COM.
After that, Under "File [Download]" click "AP" Then navigate to the file you downloaded earlier called "boot.tar"
MAKE SURE RE-PARTITION IS UNCHECKED!
Leave everything else alone then click start. Wait till it says PASS! in green letters in ODIN!
(Method 2):
Go to this link download it to your desktop and follow the instructions: https://drive.google.com/file/d/0B3UBRFq3BojVdXlSUE43VzJPbEU/view?usp=sharing
Done! Your device shouldn't be in a boot loop anymore! If you have any questions let me know!
Note: Once this process is complete, your phone will permanently show a warning in your notifications saying "Unknown action detected." This happens because your phone will detect that your kernel was modified so if you don't want this to happen, then I suggest you wait for a official lollipop OS release.
UPDATE!: You should now be able to download the "Boot.tar" file. Sorry about that!
UPDATE!: New files and instructions added if the first method didn't work!

Having some major issues
First post so forgive me if this is misplaced. Before I was aware I'm unable to down grade from 5.0 or 5.1 version of sm-g870a I attempted to downgrade and apply root from version 4.4.2/4.4.4 via another XDA thread in a faulty attempt to root. At first this presented no issues until restart. At this point the phone is soft bricked and bootloops. Both download mode and system recovery ARE accessible and prior to this I had USB debug open. I have the factory cable and odin identifies the device easily. All other md5 files failed to apply OTHER than one. (4.4.4 ota) I presume because of bootlocks which I'm now aware of. I have attempted three different stock flashes via odin all from XDA all fail at authentication claiming error fused 2 binary 1. I attempted add data pull before all of this and the device ignored a request which prompted a factory reset which was odd. I have attempted installing 3 alternative stock and stock rooted 5.0 and 5.1 firmwares from XDAs threads. All of which failed, hiwever one granted me some precious Information when I slowed down the error message via recording. It states, "Package expects fingerprint of Samsung kltattactive/lteactive:4.4.2/kot49h/g870aucu1ang3:user/release-keys o0A1:user/release-keys this device has kltactive/kltactive. This tells me as far as I know that the device is showing no firmware installed and a double fed file making the attempting installation incompatible. At this point I want to start anew, I have how attempted every route accessible via XDA and feel my options are running very low other than attempting to randomly apply firmware in sequence until odin accepts one and it sticks. That sound like a brick plan however. I don't care what firmware is loaded as long as an OS is accessible. I think this is all available Information I apologize for typos I have been at this for a total of 20 hrs straight. This bootloop was a tired lapse in judgement and has cost me 5 hours of trial and error. Wiping cache fails, reformatting internally fails, as far as I know root was never successful and I THINK philz was successful installed although at this point I cannot recall. Thanks for reading and in advance for any available help. I have SOME c# experience and some java script which is zebra vs dolphin situation I only mention as to aide and explain my trainers of thought. All other languages are vague at best
Edit: I stopped bootloop with the file attached to this thread. It now boots into samsung display bht will not go further and stops there as though it still has no operating system.

Ghujii said:
First post so forgive me if this is misplaced. Before I was aware I'm unable to down grade from 5.0 or 5.1 version of sm-g870a I attempted to downgrade and apply root from version 4.4.2/4.4.4 via another XDA thread in a faulty attempt to root. At first this presented no issues until restart. At this point the phone is soft bricked and bootloops. Both download mode and system recovery ARE accessible and prior to this I had USB debug open. I have the factory cable and odin identifies the device easily. All other md5 files failed to apply OTHER than one. (4.4.4 ota) I presume because of bootlocks which I'm now aware of. I have attempted three different stock flashes via odin all from XDA all fail at authentication claiming error fused 2 binary 1. I attempted add data pull before all of this and the device ignored a request which prompted a factory reset which was odd. I have attempted installing 3 alternative stock and stock rooted 5.0 and 5.1 firmwares from XDAs threads. All of which failed, hiwever one granted me some precious Information when I slowed down the error message via recording. It states, "Package expects fingerprint of Samsung kltattactive/lteactive:4.4.2/kot49h/g870aucu1ang3:user/release-keys o0A1:user/release-keys this device has kltactive/kltactive. This tells me as far as I know that the device is showing no firmware installed and a double fed file making the attempting installation incompatible. At this point I want to start anew, I have how attempted every route accessible via XDA and feel my options are running very low other than attempting to randomly apply firmware in sequence until odin accepts one and it sticks. That sound like a brick plan however. I don't care what firmware is loaded as long as an OS is accessible. I think this is all available Information I apologize for typos I have been at this for a total of 20 hrs straight. This bootloop was a tired lapse in judgement and has cost me 5 hours of trial and error. Wiping cache fails, reformatting internally fails, as far as I know root was never successful and I THINK philz was successful installed although at this point I cannot recall. Thanks for reading and in advance for any available help. I have SOME c# experience and some java script which is zebra vs dolphin situation I only mention as to aide and explain my trainers of thought. All other languages are vague at best
Edit: I stopped bootloop with the file attached to this thread. It now boots into samsung display bht will not go further and stops there as though it still has no operating system.
Click to expand...
Click to collapse
New method for you...

irontaco1 said:
New method for you...
Click to expand...
Click to collapse
Alright this stopped the looping now, to find a proper rom. I believe. Im going tohave to wait for 5.1 in order for it to be successful, however is having 4.4.2 still on it is a bit worrisome, I predict overwriting it should be fine though. Thank you for giving me a way to at least resolve bootlooping. I believe I shoulda have safestrapped the device, but hindsight is always 20/20 eh?

Ghujii said:
Alright this stopped the looping now, to find a proper rom. I believe. Im going tohave to wait for 5.1 in order for it to be successful, however is having 4.4.2 still on it is a bit worrisome, I predict overwriting it should be fine though. Thank you for giving me a way to at least resolve bootlooping. I believe I shoulda have safestrapped the device, but hindsight is always 20/20 eh?
Click to expand...
Click to collapse
I'm glad you got past your Bootloop! If you need anymore help let me know.

Is there a way to root my galaxy s5 active [G870A] on att with 5.0? I'm getting conflicting info and not finding the root.tar I need to flash in order to roll back to 4.4.2 so I can root. Right now I'm just trying to get root. Thanks for any help or direction.
S5 Active

I'd say hold off for a while I did that exact 5 Hong with the s5 active and it bootlocks it. You need to, if you're going to do this install and use safestrap to di so and BACK UP EVERYTHING with safe strap to SD. As long as you follow those method you SHOULD be able to even soft brick it and come back from it.

shadavis08 said:
Is there a way to root my galaxy s5 active [G870A] on att with 5.0? I'm getting conflicting info and not finding the root.tar I need to flash in order to roll back to 4.4.2 so I can root. Right now I'm just trying to get root. Thanks for any help or direction.
S5 Active
Click to expand...
Click to collapse
I haven't found any successful way to to go back to Kit Kat or 4.4.2 for this phone. In fact that's why this thread exist is because people who have tried to flash back to 4.4.2 have failed and got stuck in a Bootloop. So if you plan on trying to find away make sure you back everything up and if you fail you can use this tutorial to get your phone working again.
Make sure you have "USB Debugging" on
Make sure you have the drivers for your phone installed on your PC before you start the process of looking for a root.

Yeah I tried flashing back to 4.4.2 and it was a no go . I had the stuck on 5.0 issue where download mode says "downloading do not turn off ...... " but after I wiped my phone I was able to update to 5.1.1 successfully without any "download interrupted "errors . So at least I'm not stuck on 5.0 now lol
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Although I still have that "Downloading do not turn off target " thing when I try to enter download mode! Sheesh
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2

shadavis08 said:
Yeah I tried flashing back to 4.4.2 and it was a no go . I had the stuck on 5.0 issue where download mode says "downloading do not turn off ...... " but after I wiped my phone I was able to update to 5.1.1 successfully without any "download interrupted "errors . So at least I'm not stuck on 5.0 now lol
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Although I still have that "Downloading do not turn off target " thing when I try to enter download mode! Sheesh
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
There should not be anything attempting to download when you boot into ''download mode'' if there is, its highly likely there are still particulates of the last bad flash. I would as he said above, enable USB debugging and the like, and install safe strap to be safe. After safe strap is done and youve followed the tutorial which you can find in another thread on this site, boot your phone down and then power it back on, safe strap should come up first, when it does so push the ''recovery'' option to enter safe strap( someone correct me if thats wrong, my phone is currently dead/charging so i cant check) From there you can back up to an SD card, make sure you enable compression when you do.
Once thats done, WIPE YOUR PHONE, and Cache,( maybe dalvik as well if you cant find it dont worry.)and its all on SD CARD, then attempt to dirty flash( I dont recommend), or clean flash your device WITH safe strap. This typically entails downloading a .zip file and opening it THROUGH safestrap, which is done the same way as backing up your data, only via another option in the menu. Simply put; Back up data with safe strap, after thats done push back and choose FLASH, it should show you all available items it can flash from/to, pick and pray. I didnt go this route when I tried, I attempted to brute force the Bootlocked S5A, and it caused some errors that I now have reversed after much pain. If I HAD safe strapped, It may have went smoother for me, and may for you. Safestrap for us Samsung users is the same as Clockwork Mod for the rest if you weren't aware.
I'll edit this when my phone charges and I can walk you through appropriately, if need be MSG me and Ill do it as soon as I receive the message via this thread if I have not already.

hi guys! good day! i have tried the new method twice! and odin fails everytime! the problem is with the modem.bin! is there any way to fix this?

Make sure you're running lollipop and not Kit Kat and make sure you have the correct phone model. If you don't meet both those requirements then it won't work.

it has on lollipop recoverymode comes up with LRX21T.G870AUCU1B0C5. ISNT that lollipop? download mode also says ;A2, P1

abatoir said:
it has on lollipop recoverymode comes up with LRX21T.G870AUCU1B0C5. ISNT that lollipop? download mode also says ;A2, P1
Click to expand...
Click to collapse
Yeah that information is correct. You might want to download the latest version of ODIN and try again. (Make sure you're putting the modem.bin file in the correct spot in Odin.)

I think I have the latest odin.. And modem can only fit in the cp field I think. Its just not working for me. I tried doing each part separately. And the modem flash always fail.
---------- Post added at 06:58 AM ---------- Previous post was at 06:57 AM ----------
I used odin 3.10 and also tried with odin 3.7

Hey irontac. Since you came up with this fix. Are you able to tell me why those s5 go into bootloop like that? By the way mine is not in bootloop. It hangs on the AT&T logo (the glob) . I was thinking maybe I need to flash the system.img , but where can I find that. And how can I flash it by itself? Actually the phone belongs to a friend. He seems to have rooted it. But I don't know what else he messed with.

abatoir said:
Hey irontac. Since you came up with this fix. Are you able to tell me why those s5 go into bootloop like that? By the way mine is not in bootloop. It hangs on the AT&T logo (the glob) . I was thinking maybe I need to flash the system.img , but where can I find that. And how can I flash it by itself? Actually the phone belongs to a friend. He seems to have rooted it. But I don't know what else he messed with.
Click to expand...
Click to collapse
You might want to boot into recovery mode and try to factory reset it normally. If his phone is rooted you could also flash a custom rom to it and get it out of Bootloop.

I also forgot to mention you can't get ahold of the system.img because it's not released to the public.

Yeah. I wanted it back to stock. I downloaded the 5.0 cfg file. Opened it up and I realized that there is no system.img in there. Oh Well. You think it would boot if I used kitKat system.img?

abatoir said:
Yeah. I wanted it back to stock. I downloaded the 5.0 cfg file. Opened it up and I realized that there is no system.img in there. Oh Well. You think it would boot if I used kitKat system.img?
Click to expand...
Click to collapse
If you flash the Kit Kat system.img you might have to downgrade the kernel also. I would give it a try and see if it works.

SOS - OneClick Brick

Greetings,
I need some help. I purchased OneClickRoot for my Verizon S5. Everything went swimmingly right up until it didn't. I got root after several hours with the oneclick tech team. he gave me instructions on how to flash a ROM, but left out the apparently important step where I should have skipped the signature verification. So I had SafeStrap, wiped everything and tried to flash an unsigned ROM. now the phone is dead wit no OS and seemingly no ability to get back to safestrap. Should I just toss this phone in the rubbish and buy a new one or can it be saved? When I boot to recovery, it is Android recovery and it keeps failing on the verification.
All advice is welcome.
Doug M.

dwmackay said:
Greetings,
I need some help. I purchased OneClickRoot for my Verizon S5. Everything went swimmingly right up until it didn't. I got root after several hours with the oneclick tech team. he gave me instructions on how to flash a ROM, but left out the apparently important step where I should have skipped the signature verification. So I had SafeStrap, wiped everything and tried to flash an unsigned ROM. now the phone is dead wit no OS and seemingly no ability to get back to safestrap. Should I just toss this phone in the rubbish and buy a new one or can it be saved? When I boot to recovery, it is Android recovery and it keeps failing on the verification.
All advice is welcome.
Doug M.
Click to expand...
Click to collapse
I'm unfamiliar with Verizon variants, but have you tried using Odin to flash the original stock?
https://forum.xda-developers.com/showthread.php?t=2784880
Sent from my Samsung SM-G900I using XDA Labs

Yea dude as long as you can get into download mode (or Odin mode whatever you feel like calling it) you're fine just flash whatever version you feel like being on and I would follow these instructions for root and ROMs and possible bootloader unlock since it's Verizon https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529

So Close!!
Thanks for the help. I followed this guide ( https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529) and got it back; ...sort-of.
In Step 13, I used the 6.0 firmware.
In Step 14 I used the "latest stock rooted Lollipop Rom" that was recommended.
I have what appears to be a rooted 5.0 factory rom installed. However, when booting, I get process stopped errors for the first 2 minutes. Maybe 15 or 20 of them. After that, they stop.
Current Problems:
1) the radios are dead. Wi-Fi will not turn on and it does not know that my SIM card is installed
2) when the screen times-out I have to pull the battery to get it back.
3) All the error messages (android.process.media)
4) It does not see the SD card
Questions:
A) Can you help me fix the radio problems?
B) Once I get the radios working again, can I flash any G900V ROM with safestrap and it will likely solve 2, 3 &4?
C) Are the custom roms on 6.0 and higher rooted? I was looking at this one (https://forum.xda-developers.com/galaxy-s5/unified-development/rom-cosmic-os-3-1-t3553838)
Thanks for any assistance you can provide.

Idk if i can help bt i can try haha Well first thing first it sounds like you used marshmallow firmware but then flashed a lollipop ROM which yes it will boot up bt stuff like your radio and GPS, etc won't work so first thing is first i would say is do a complete wipe and get your self back to stock through Odin and get everything working first before worrying about ROMs then I have to ask is what is what is your emmc are you 15 (bootloader unlock and can easily root 6.0.1 or higher) or emmc 11 (can only root 5.0)