Database Users

[GUIDE] Unbricking Karbonn A21

This is the first ever guide written by me, and I am not an expert in android and recovery, so please pardon if any mistakes are found. Lets correct if any. Also at this time Karbonn A21's system.img file is not available hence we had to perform some hard steps to get the job done.
CAUTION : WARRANTY VOID : I'm not responsible if any hard/soft damage occurs to your handset after/during using this guide. I successfully unbricked my A21 and want all of you to understand the recovery procedure properly before doing anything. Rooting your handset and applying another recovery/ROM certainly voids manufacturer's warranty. Do anything mentioned here ONLY if you understand it.
The only reason I posted this is to save any karbonn a21 users time if his device gets bricked. I had to keep my business aside for a whole day to recover my Karbonn A21 in working state.
You will have to keep handy :
1) Drivers for Karbonn A21 Click here
1) CWM by Eklovya Click here
2) AIO Flasher by Fonehacker Click here
3) Custom ROM flashable reloaded (*.zip) and A9+ system image (system.img) (because A21 's system image was not found at this time.) here and here
Also use Root_with_Restore_by_Bin4ry_v18 to root your karbonn a21 whenever necessary.
First of all you must understand that three partitions are necessary in Android : 1) Boot, 2) System, 3) Recovery
Other than these, there are Data, Cache, etc.
Unbricking an Android handset involves
1) Repairing Boot partition in fastboot mode using AIO Flasher to flash a proper boot.img file to the handset.
2) Installing proper Recovery partition in fastboot or normal mode using AIO Flasher, CWM Recovery by eklovya is a suitable solution.
3) Installing the System partition from a proper system.img file using AIO Flasher, or from a .zip file (Custom ROM) or a backed up ROM through CWM recovery.
Fastboot mode :
Fastboot mode is a Android device's state where it is possible to flash different partitions through a simple USB cable and PC. It can be activated on Karbonn A21 by keep pressed [Volume Up] key during power on (read : before power on) until your screen glows in green colour. Instantly release [Volume Up] key or your A21 may boot into recovery partition. On your PC proper drivers must be installed and fastboot.exe from Google is required to flash the partitions to the handset. AIO Flasher is a good GUI based solution for that.
Recovery :
During the above process, (for Karbonn A21) if you keep the [Volume Up] key pressed until the screen glows red, and then release the key, you enter into recovery mode. Updates to operating system's files can be installed from this mode. Stock recovery means manufacturer provided Recovery partition 'as it is' and Custom recovery is recovery partition OS developed by other developers, CWM recovery being the most popular one.
STEPS FOR UNBRICKING :
1) Repair Boot partition
Firstly enter into fastboot mode, and then use AIO Flasher to flash boot.img of Karbonn A9+ / Cherry Mobile flare to boot partition of your A21
2) Repair Recovery partition
Using AIO flasher, flash CWM Recovery's img file to recovery partition, in A21's fastboot mode. (For more info read this and this thread)
3) Install System.img to system partition
Currently A21's system.img is not available, else we could easily flash it to A21's system partition and get our handset running. Hence I flashed A9+ system.img downloaded from above (note that the downloaded file has extension .7z, to be renamed to .img), by AIO Flasher to system partition in fastboot mode. The flashed system rom was made for Karbonn A9+ hence it didn't work on my handset properly. I got white display and the touch screen and buttons didn't work. I used AIO flasher's screenshot facility to get into the handset and found that actually the system was up and running properly, except the display and touch interface. Then I decided to flash custom ROM and tried using santo_rock 's custom ROM DarkBoid. But it didn't work. Then I flashed ashoknraj 's custom ROM Flashable reloaded. It was success.
4) Install ROM for A21
To install the custom ROM via Eklovya's CWM recovery, the .zip file needed to be inside internal memory in the form of update.zip file stored in root folder, but the internal memory was not accessible through my PC as its usb drive was shown in windows explorer but was in [no disk] state, and I could not select [Turn on USB Storage] on my A21.
Here comes ADB 's power. I used ADB push to push the custom ROM into the internal memory.
Use the following command to push the update.zip (rename the custom ROM to update.zip) :
adb push update.zip /mnt/sdcard/sd_card/update.zip
Note the spaces and special characters properly.
The file is greater than 100 MB and hence some time will be required to transfer that file into memory.
If it shows error Permission denied, then remount using the command
ADB REMOUNT
and then try again.
Now we have the custom ROM ready in A21's internal memory, lets flash it. Boot into CWM recovery mode and select apply update.zip, let it install, and then wipe data/cache and reboot the device normally. (For more info read this thread)
If everything goes well, your A21 will now be successfully unbricked.
Of course you need patience and concentration to do all this.
DISCLAIMER : The above process and softwares are not my creation and are of respective developers. I just aggregated all these to one place.

Thanks for the guide. Do you know of any solution if phone only boots in QPST Download mode? No other methods like Fastboot, adb working for now.
I've connected via QPST tool but don't have images to flash. If you can research on it and provide the files to me, it would be great help.

Enter QPST download for karbonn A21
Is there any soution to this problem. It arises when I install cwm. But I have restored the default recovery by mounting it in linux.
When it shows this in sceen you can access all the partitions in linux.
I used this command to restore the default recovery as it was 16th partition that I changed with cwm image
dd if=/home/tushar/recovery.img of=/dev/sdc16 bs=4096
Also fastboot mode in not working on karbonn A21. powering up while holding up volume key shows me no green screen

karbonn a21 brickked
need help

need ashoknraj 's custom ROM Flashable reloaded
bgb7 said:
This is the first ever guide written by me, and I am not an expert in android and recovery, so please pardon if any mistakes are found. Lets correct if any. Also at this time Karbonn A21's system.img file is not available hence we had to perform some hard steps to get the job done.
CAUTION : WARRANTY VOID : I'm not responsible if any hard/soft damage occurs to your handset after/during using this guide. I successfully unbricked my A21 and want all of you to understand the recovery procedure properly before doing anything. Rooting your handset and applying another recovery/ROM certainly voids manufacturer's warranty. Do anything mentioned here ONLY if you understand it.
The only reason I posted this is to save any karbonn a21 users time if his device gets bricked. I had to keep my business aside for a whole day to recover my Karbonn A21 in working state.
You will have to keep handy :
1) Drivers for Karbonn A21 Click here
1) CWM by Eklovya Click here
2) AIO Flasher by Fonehacker Click here
3) Custom ROM flashable reloaded (*.zip) and A9+ system image (system.img) (because A21 's system image was not found at this time.) here and here
Also use Root_with_Restore_by_Bin4ry_v18 to root your karbonn a21 whenever necessary.
First of all you must understand that three partitions are necessary in Android : 1) Boot, 2) System, 3) Recovery
Other than these, there are Data, Cache, etc.
Unbricking an Android handset involves
1) Repairing Boot partition in fastboot mode using AIO Flasher to flash a proper boot.img file to the handset.
2) Installing proper Recovery partition in fastboot or normal mode using AIO Flasher, CWM Recovery by eklovya is a suitable solution.
3) Installing the System partition from a proper system.img file using AIO Flasher, or from a .zip file (Custom ROM) or a backed up ROM through CWM recovery.
Fastboot mode :
Fastboot mode is a Android device's state where it is possible to flash different partitions through a simple USB cable and PC. It can be activated on Karbonn A21 by keep pressed [Volume Up] key during power on (read : before power on) until your screen glows in green colour. Instantly release [Volume Up] key or your A21 may boot into recovery partition. On your PC proper drivers must be installed and fastboot.exe from Google is required to flash the partitions to the handset. AIO Flasher is a good GUI based solution for that.
Recovery :
During the above process, (for Karbonn A21) if you keep the [Volume Up] key pressed until the screen glows red, and then release the key, you enter into recovery mode. Updates to operating system's files can be installed from this mode. Stock recovery means manufacturer provided Recovery partition 'as it is' and Custom recovery is recovery partition OS developed by other developers, CWM recovery being the most popular one.
STEPS FOR UNBRICKING :
1) Repair Boot partition
Firstly enter into fastboot mode, and then use AIO Flasher to flash boot.img of Karbonn A9+ / Cherry Mobile flare to boot partition of your A21
2) Repair Recovery partition
Using AIO flasher, flash CWM Recovery's img file to recovery partition, in A21's fastboot mode. (For more info read this and this thread)
3) Install System.img to system partition
Currently A21's system.img is not available, else we could easily flash it to A21's system partition and get our handset running. Hence I flashed A9+ system.img downloaded from above (note that the downloaded file has extension .7z, to be renamed to .img), by AIO Flasher to system partition in fastboot mode. The flashed system rom was made for Karbonn A9+ hence it didn't work on my handset properly. I got white display and the touch screen and buttons didn't work. I used AIO flasher's screenshot facility to get into the handset and found that actually the system was up and running properly, except the display and touch interface. Then I decided to flash custom ROM and tried using santo_rock 's custom ROM DarkBoid. But it didn't work. Then I flashed ashoknraj 's custom ROM Flashable reloaded. It was success.
4) Install ROM for A21
To install the custom ROM via Eklovya's CWM recovery, the .zip file needed to be inside internal memory in the form of update.zip file stored in root folder, but the internal memory was not accessible through my PC as its usb drive was shown in windows explorer but was in [no disk] state, and I could not select [Turn on USB Storage] on my A21.
Here comes ADB 's power. I used ADB push to push the custom ROM into the internal memory.
Use the following command to push the update.zip (rename the custom ROM to update.zip) :
adb push update.zip /mnt/sdcard/sd_card/update.zip
Note the spaces and special characters properly.
The file is greater than 100 MB and hence some time will be required to transfer that file into memory.
If it shows error Permission denied, then remount using the command
ADB REMOUNT
and then try again.
Now we have the custom ROM ready in A21's internal memory, lets flash it. Boot into CWM recovery mode and select apply update.zip, let it install, and then wipe data/cache and reboot the device normally. (For more info read this thread)
If everything goes well, your A21 will now be successfully unbricked.
Of course you need patience and concentration to do all this.
DISCLAIMER : The above process and softwares are not my creation and are of respective developers. I just aggregated all these to one place.
Click to expand...
Click to collapse
I followed the above steps and could come till Flashing System.img the links of ashoknraj 's custom ROM Flashable reloaded are not working I request you to please upload the rom and post the link
thanks

bgb7 said:
This is the first ever guide written by me, and I am not an expert in android and recovery, so please pardon if any mistakes are found. Lets correct if any. Also at this time Karbonn A21's system.img file is not available hence we had to perform some hard steps to get the job done.
CAUTION : WARRANTY VOID : I'm not responsible if any hard/soft damage occurs to your handset after/during using this guide. I successfully unbricked my A21 and want all of you to understand the recovery procedure properly before doing anything. Rooting your handset and applying another recovery/ROM certainly voids manufacturer's warranty. Do anything mentioned here ONLY if you understand it.
The only reason I posted this is to save any karbonn a21 users time if his device gets bricked. I had to keep my business aside for a whole day to recover my Karbonn A21 in working state.
You will have to keep handy :
1) Drivers for Karbonn A21 Click here
1) CWM by Eklovya Click here
2) AIO Flasher by Fonehacker Click here
3) Custom ROM flashable reloaded (*.zip) and A9+ system image (system.img) (because A21 's system image was not found at this time.) here and here
Also use Root_with_Restore_by_Bin4ry_v18 to root your karbonn a21 whenever necessary.
First of all you must understand that three partitions are necessary in Android : 1) Boot, 2) System, 3) Recovery
Other than these, there are Data, Cache, etc.
Unbricking an Android handset involves
1) Repairing Boot partition in fastboot mode using AIO Flasher to flash a proper boot.img file to the handset.
2) Installing proper Recovery partition in fastboot or normal mode using AIO Flasher, CWM Recovery by eklovya is a suitable solution.
3) Installing the System partition from a proper system.img file using AIO Flasher, or from a .zip file (Custom ROM) or a backed up ROM through CWM recovery.
Fastboot mode :
Fastboot mode is a Android device's state where it is possible to flash different partitions through a simple USB cable and PC. It can be activated on Karbonn A21 by keep pressed [Volume Up] key during power on (read : before power on) until your screen glows in green colour. Instantly release [Volume Up] key or your A21 may boot into recovery partition. On your PC proper drivers must be installed and fastboot.exe from Google is required to flash the partitions to the handset. AIO Flasher is a good GUI based solution for that.
Recovery :
During the above process, (for Karbonn A21) if you keep the [Volume Up] key pressed until the screen glows red, and then release the key, you enter into recovery mode. Updates to operating system's files can be installed from this mode. Stock recovery means manufacturer provided Recovery partition 'as it is' and Custom recovery is recovery partition OS developed by other developers, CWM recovery being the most popular one.
STEPS FOR UNBRICKING :
1) Repair Boot partition
Firstly enter into fastboot mode, and then use AIO Flasher to flash boot.img of Karbonn A9+ / Cherry Mobile flare to boot partition of your A21
2) Repair Recovery partition
Using AIO flasher, flash CWM Recovery's img file to recovery partition, in A21's fastboot mode. (For more info read this and this thread)
3) Install System.img to system partition
Currently A21's system.img is not available, else we could easily flash it to A21's system partition and get our handset running. Hence I flashed A9+ system.img downloaded from above (note that the downloaded file has extension .7z, to be renamed to .img), by AIO Flasher to system partition in fastboot mode. The flashed system rom was made for Karbonn A9+ hence it didn't work on my handset properly. I got white display and the touch screen and buttons didn't work. I used AIO flasher's screenshot facility to get into the handset and found that actually the system was up and running properly, except the display and touch interface. Then I decided to flash custom ROM and tried using santo_rock 's custom ROM DarkBoid. But it didn't work. Then I flashed ashoknraj 's custom ROM Flashable reloaded. It was success.
4) Install ROM for A21
To install the custom ROM via Eklovya's CWM recovery, the .zip file needed to be inside internal memory in the form of update.zip file stored in root folder, but the internal memory was not accessible through my PC as its usb drive was shown in windows explorer but was in [no disk] state, and I could not select [Turn on USB Storage] on my A21.
Here comes ADB 's power. I used ADB push to push the custom ROM into the internal memory.
Use the following command to push the update.zip (rename the custom ROM to update.zip) :
adb push update.zip /mnt/sdcard/sd_card/update.zip
Note the spaces and special characters properly.
The file is greater than 100 MB and hence some time will be required to transfer that file into memory.
If it shows error Permission denied, then remount using the command
ADB REMOUNT
and then try again.
Now we have the custom ROM ready in A21's internal memory, lets flash it. Boot into CWM recovery mode and select apply update.zip, let it install, and then wipe data/cache and reboot the device normally. (For more info read this thread)
If everything goes well, your A21 will now be successfully unbricked.
Of course you need patience and concentration to do all this.
DISCLAIMER : The above process and softwares are not my creation and are of respective developers. I just aggregated all these to one place.
Click to expand...
Click to collapse
what u mean bricked?......
when i wipe data.... the karbonn a21 is bricked.....
cant go int o recovery mode....
cant go into fastboot mode....
only connect with zeus flash drive......
now how to flash it?
how to go into recovery mode or fastboot mode?
any solution?

is there any solution for unbricking a21 with no adb or fastboot?
I tried to use AIO flasher but it doesn't detect anything.
QPST download mode is shown if i press power and volume- during bootup.
Fastboot mode is shown on phone but on PC its doesn't detect any android device at all. No ADB support either.
I've cwm recovery install but its not showing my SD card.
Is there anyway to unbrick my phone without taking it to service center?
Regards

Plz Help
need some serious help,...i have bricked karbonn a21,...it got bricked because i formatted the boot partition which was of harly 20-40kb,..i guess,...i managed to take a backup from the same running device,..i got two files which are AMSS.MBN and AMSSHD.MBN,...and i don't know what to do,...when i connect my phone it just shows,..qualcomm hs-usb qdloader 9008,...i tried qpst software but it doesn't seem supported,....plz help,...can anyone tell me my phones current state,...and the process of de-bricking,...thanks in advance,... :good:

help me,..
can anyone suggest what to do ahead,.....

Plz Help Out,...
i have hard bricked Karbonn A21,....and now with some help,...i programmed the bootloader,....with the qpst emmc software download,.....and after programming the bootloader it shows qualcomm mmc storage,...so i think its the time to fill the partition,...with programming mmc storage,...but the problem is i don't have the original files backed up,..but i do have a running A21,..can i backup the files somehow,.or i can get the files in a zip on the internet ,.........plz thanks in advance,..... :angel:

My Karbonn A21 is showing white screen what should i do

Hard bricked Karbonn a21
My phone karbonn a21 was hard brick and in QPST Download Mode it was connected to the PC and was recognized by the drivers too and I, from QPST CONFIGURATION of QPST.2.7.374 software I added port and From eMMC SOFTWARE DOWNLOAD APP I used BP FIRMWARE extracted files in 'load xml def' and 'load patch def' and also in both search path 1,2 I used the location of BP FIRMWARE. After waiting few minutes it said download complete and phone around 4 touchpad it blinked and i disconnected the phone from PC hoping it can go in fastboot mode but it didnt power on and cant go in qpst and fastboot mode ! Now when ever i connect the phone in Pc or charger it just directly starts blinking in keypad only. And in PC when connected it says USB media connected but there is no any removeable disc connected when i looked in My computer and also in device manager there is no any sign of mobile being connected in computer ! Can Anyone help me solve this problem ? help will be really appreciated ! P.S I used BP FIRMWARE of jellybean from this forum ==> forum.xda-developers.com/showthread.php?t=2330823

For karbonn a9+ ??
is flashing system.img sufficient to karbonn A9+??
---------- Post added at 12:26 PM ---------- Previous post was at 11:52 AM ----------
I have CWM Recovery installed.I accidently wiped system and sdcard and cant boot android. I have nandroid backup and stock rom for my karbonn A9+ in my pc and pda net driver already installed in my pc. How can i repair my karbonn A9+? Please reply ASAP.

need for karbonn a12
i've tried to install font...and my mobile stuck in bootanimation.
need a help in unbricking it.

help karbonn a21
my karbonn a21 device is not in warrenty i have rooted my karbonn a21
and install font changer software i change the font in it then it say reboot phone
i restat phone but when i restart phone it shows firstly karbonn logo and then go at anination it and android does not open
then i press volume + and power on it shows green screen it does no turn into red to restore factory setting and does not show the list
then i press volume- and power key it only shows ENTER QPST DOWNLOAD on black screen
i went to customer care they say that it is software sorting problem they say that phone is dead.
i want to itself repair it. Is there is any method to repair it or fresh install android in it?
and pls give me software link with tuutorial
also give me karbonn a21 drivers and how to instal in pc
i search so many website but i can not found any solution then i foun your link relatd to this and i m telling problem to you
pls give me solution with tutorial
pls help urgent
alo pls tell me that there is any method to reinstall android in karbonn a21 as we install fresh window in pc after corrupt
pls give me solution with tutorial

Karbonn a21 Bricked. please help!
I tried installing Nokia X firmware on my Karbonn a21 but it gor stuck at black screen no boot logo or animation.
When i press volumeUP+ power itwas going to black screen only so i thought recovery partition is also gone
But volumeDOWN +power was working so i put it into QPST mode and tried EMMC download software with Karbonn a9+ bp firmware. it resulted in error of cookies not present!.
Then i got to know that volume up button was broken from hardware only. so i got it fixed.
Now i see green light for fastboot and then pink for recovery.
BUT if i leave power button on pink(recovery) it goes to black screen
And if i leaveit on fastboot(green) it stays green only .
I dont know if that failed QPST try blew my recovery or it got bad in the beginning only!
QPST mode is still working and drivers are getting detected as Qualcomm USb 9006.
Please tell me what i can do to revive my phone!. (Its not in warranty)
I can donate to whoever solves my issue!

Dude... i think the rom is not compatible with your phone....flash stock rom using qpst
---------- Post added at 04:05 AM ---------- Previous post was at 04:01 AM ----------
You need to be on fastboot mode to flash stock rom using qpst

1manshow said:
Thanks for the guide. Do you know of any solution if phone only boots in QPST Download mode? No other methods like Fastboot, adb working for now.
I've connected via QPST tool but don't have images to flash. If you can research on it and provide the files to me, it would be great help.
Click to expand...
Click to collapse
u can download Image of karbonn a21 from here
firmwarefile.com/karbonn-a21
set this link b'cos i cant send link on my msg

Bhaveshsuthar10 said:
u can download Image of karbonn a21 from here
firmwarefile.com/karbonn-a21
set this link b'cos i cant send link on my msg
Click to expand...
Click to collapse
Thanks mate for your help. But I've got it replaced within warranty from Karbonn and already sold it last year.

Naineesh said:
can anyone suggest what to do ahead,.....
Click to expand...
Click to collapse
Dude can u suggest me what to do when karbonn A21 is dead.
your help will be appreciated.

[GUIDE] How to restore the Stock ROM on the Grand X Pro

How to restore the Stock ROM:
For Grand X Pro​OK, today I'll be showing you how to restore the Grand X Pro back to Stock, just as it was before you flashed the custom ROM...
You will need:
A PC Running Windows 7 (ONLY WIN 7 WORKS FOR NOW)
The Grand X Pro
A USB Android Cable
My FlashTool
ZTE VCOM Preloader Drivers MT6577
So , first get the full flashtool from here: ApeelMe's Blogspot - ZTE Grand X Pro FlashTool
Also install the Preloader drivers if you didn't do so...
Plug in the Grand X Pro and then turn it off...
It should (on the PC) install some drivers and fail , don't worry...
Open flashtool and select the NandUtil file and the Scatter file (nandutil.bin and mt6577_scatter.txt , their names are like that)
In the menu where you can select ANDROID , RECOVERY , BOOT , MBR, DSP , Preloader , etc DON'T Touch anything as it will wipe that partition and you may hard-brick your device..
Click "Download" in flashtool, wait till the green circle...
After the green circle appears , close flashtool and disconnect the phone.
Now turn it on, good ol' stock ROM...
Hope this works for you as it did work for me...
TeamMaverick

it didn't work for me, it completes the download and evrything but it still just stands on zte sign an that is it, can you help?

trying to use but i get a nandutil.bin file is not a valid da format. Is it corrupted?
Anyhowse. i went ahead and flshed with all in one. im now with cyanogenmod and cwm which is the opposite of what i needed. How can I return to stock rom and stock recovery? basically i need to send it back to shop because of faulty screen.
Resolved. Followed guide with link here
http://apeelme.blogspot.no/2013/08/zte-blade-super-gyari-allapot.html?m=1

how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post

majmun123 said:
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
Click to expand...
Click to collapse
Didn't have any problems followed these steps:
1. run Flash_tool.exe from desktopfolder (maybe try run as admin if a problem)
2. select File-open scatter loading file
3. select MT6577_Android_scatter_emmc.txt from restore to stock folder.
the ebr1 etc should be automatically filled in with file pathway
4.click download button
5. plug in switched off telephone (if drivers installed properly should just run)
6. wait until green circle appears. hey presto! switch on telephone.

nothing i hav done all that, an the problem is when it is all finished, i get errors such as can't mount data, it doesn find anything, i don't know what to do else, if you want i can post pictures when i enter recovery mode

repair grand x pro
Hi, this is no working for me. Just have CWm after finished.
I tried update tool software too, but can't recognize phone, red x stay at chacking and installing drivers.
Someone help?

[Q] [q] my sm-g7102 cannot on!!help me please all pro andriod!!!

MY PHONE CANNOT ON CANNOT GO TO DOWNLOAD MODE OR GO TO RECOVERY MODE...MY PHONE ALREADY ROOT BUT AFTER I DOWNLOAD CMW RECOVERY AND I BOOT MY PHONE..ALL CANNOT OPEN!!!SCREEN ONLY BLACK...PLEASE HELP MEEEEEE:crying::crying::crying::crying::crying:

shafara said:
MY PHONE CANNOT ON CANNOT GO TO DOWNLOAD MODE OR GO TO RECOVERY MODE...MY PHONE ALREADY ROOT BUT AFTER I DOWNLOAD CMW RECOVERY AND I BOOT MY PHONE..ALL CANNOT OPEN!!!SCREEN ONLY BLACK...PLEASE HELP MEEEEEE:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try to flash ROM with odin

shafara said:
MY PHONE CANNOT ON CANNOT GO TO DOWNLOAD MODE OR GO TO RECOVERY MODE...MY PHONE ALREADY ROOT BUT AFTER I DOWNLOAD CMW RECOVERY AND I BOOT MY PHONE..ALL CANNOT OPEN!!!SCREEN ONLY BLACK...PLEASE HELP MEEEEEE:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
May be ur phone hard bricked..connect to system and find the device name of ur phone shown on tht..If find something like qualcomm name.u may have some chance to de brick ur phone. Or goto service center.

Its very simple just follow the steps given in below link
It work for hard brick device bucs I had tested it many time
http://goo.gl/3jovyq

i need the sdc for G7105
And do we need a box i herd may peope said we need a box or something

[RECOVERY][STOCK] Lenovo A6000 Plus stock Recovery

Hello Lenovers...
Lately i've been through many user posts asking for the A6000 Plus "Stock Recovery"
Alrighty... I just managed to grab the file from my device and thought of sharing the same here with all fellow Lenovers...
Be warned that this is not a .zip flashable file... If you're rooted then, use "Flashify" from Playstore to flash this...
CLICK HERE TO DOWNLOAD
Please hit THANKS if I helped.

Bro, try to backup the kernel which have the same size.

thanks

sorry for english
flash with boot img , recovery img or zip file? what type this stock rom file?

post kernel
Give me also kernel

My mobile was ran into problem. Please help! Urgent
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.

follow this
First remove the battery completely, then insert it and simultaneosly hold Volume UP button + power button and then release power button when ur phone switches on and continue holding volume up button, then you will find an option called fastboot/bootloader, select that option, then phone screen will not be showing lenovo logo and powered by android stay there. connect your phone to pc via usb cable.
1. Google for Minimal ADB and fastboot, you will get a zip file package, install it.
2. then go that minimal ADB folder in C:\ and press shift and right click on mouse, select use command prompt here. it will take to DOS screen
3. copy this TWRP recovery.img in that minimal adb folder(C:\minimal adb). Link here. http://forum.xda-developers.com/android/development/twrp-lenovo-a6000-a6000-t3156149
4. now type fastboot devices in command prompt
5. It will show list of devices attached, it will show only if your phone is in fastboot mode.
6. then enter the following command: fastboot boot recovery.img
7. Wait for few seconds, it will load TWRP automatically
8. Take backup if any, and wipe advanced settings including Dalvik cache.
9. Then you will be able to find your device internal storage in my computer
10. Copy lenovo stock rom zip file to your phone. (Search google for Stock ROM of Lenovo A6000)
11. Now select Install on TWRP menu and from Internal Memory, go to data folder, you will find your zip file, select it and install.
12. It will install automatically and boots up with new Stock ROM.
Thanks

arjsreddi said:
First remove the battery completely, then insert it and simultaneosly hold Volume UP button + power button and then release power button when ur phone switches on and continue holding volume up button, then you will find an option called fastboot/bootloader, select that option, then phone screen will not be showing lenovo logo and powered by android stay there. connect your phone to pc via usb cable.
1. Google for Minimal ADB and fastboot, you will get a zip file package, install it.
2. then go that minimal ADB folder in C:\ and press shift and right click on mouse, select use command prompt here. it will take to DOS screen
3. copy this TWRP recovery.img in that minimal adb folder(C:\minimal adb). Link here. http://forum.xda-developers.com/android/development/twrp-lenovo-a6000-a6000-t3156149
4. now type fastboot devices in command prompt
5. It will show list of devices attached, it will show only if your phone is in fastboot mode.
6. then enter the following command: fastboot boot recovery.img
7. Wait for few seconds, it will load TWRP automatically
8. Take backup if any, and wipe advanced settings including Dalvik cache.
9. Then you will be able to find your device internal storage in my computer
10. Copy lenovo stock rom zip file to your phone. (Search google for Stock ROM of Lenovo A6000)
11. Now select Install on TWRP menu and from Internal Memory, go to data folder, you will find your zip file, select it and install.
12. It will install automatically and boots up with new Stock ROM.
Thanks
Click to expand...
Click to collapse
Bro Will OTA updates work after doing this???

No
No I don't think so, I have an OTA update waiting, but i don't want to do it now, in between the week as I don't have another mobile if phone gets bricked, will try this weekend.

No Stock Rom
Theres still no stock rom available for A6000 Plus..

arjsreddi said:
No I don't think so, I have an OTA update waiting, but i don't want to do it now, in between the week as I don't have another mobile if phone gets bricked, will try this weekend.
Click to expand...
Click to collapse
Bro Did you try updating your device. And how did you root your device by using kingroot or superuser? I just rooted my lenovo a6000 plus by superuser using cwm. I just wanna know can i unroot my device by the native superuser full unroot option and install ota when lolipop is available without bricking my device?
I ve heard that people who rooted their lenovo a6000 plus with kingroot had problems to unroot and install ota updates is it the same case with superuser?

Same Here!!
iyyappan11 said:
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
Click to expand...
Click to collapse
I am Also Facing The Same Problem

sizzlingtycoon said:
Hello Lenovers...
Lately i've been through many user posts asking for the A6000 Plus "Stock Recovery"
Alrighty... I just managed to grab the file from my device and thought of sharing the same here with all fellow Lenovers...
Be warned that this is not a .zip flashable file... If you're rooted then, use "Flashify" from Playstore to flash this...
CLICK HERE TO DOWNLOAD
Please hit THANKS if I helped.
Click to expand...
Click to collapse
can you please share the instructions in short to flash this recovery. And will the ota updates work ? I guess they will work.
You mentioned the flashify app and I have never used an app to flash a recovery.img

for lenovo a6000
Can u please arrange stock recovery for lenovo a6000. thank you in advance

I have unbricked my lenovo a6000 anyone wants to know just reply to this post

Phone_Beast said:
I have unbricked my lenovo a6000 anyone wants to know just reply to this post
Click to expand...
Click to collapse
please man help me.. i am on stock rom of Lenovo A6000 .. but i want stock recovery.. i am not able to find it.. i want A6000 not A6000 plus ..please help me

jashmon said:
please man help me.. i am on stock rom of Lenovo A6000 .. but i want stock recovery.. i am not able to find it.. i want A6000 not A6000 plus ..please help me
Click to expand...
Click to collapse
Stock recovery for your phone is on the first page of this thread. Download the file, rename it to recovery.img and then flash it using fastboot.

Will this work for a6000 as well ??

phone soft bricked?? plz help
I think my lenovo a6000 plus has been softbricked as it doesn't get pass the logo screen. also recovery mode is not opening ( tried every combination). Help me with this. This phone has really checked up my nerves. the reason for flashing this phone as it had a problem of automatically downloading apps without consent, and video apps popping out in the middle of night(time service, monkey test apps), so the only best solution i found was to flash it( tried every other possibility- factory reset, password change...etc everything). Now it has died on me, can't get pass the logo screen. Also connecting the phone to pc gives me multiple drive partitions. Please help.

Try to flash any custom rom..but first flash custom recovery using minimal and fastboot

[q] urgent!!! How to install cwm on soft bricked lenovo a6000 plus

How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:

query
I am also having the same problem......
can anyone help?
please plesae

vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution

lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.

SAME same seems like there is no help out there and we might have to use our phones as paperweight!

hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all

sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked

Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me

vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".

Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success

Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?

Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot

Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it

gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??

BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img

My phone does not reboot

batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution

kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk