Related
Hi guys after having upgraded my AT & T Motorola Atrix gingerbread to version 1.83 I get this error: failed to boot 4.
how do I reset the phone? thanks
Flas sbf. Look in development for flashing sbfs. Tons of information. Also wrong section this should be under questions and answers section.
Sent from my MB860 using Tapatalk
Flash either full 4.1.26 or 4.1.57 sbf, then update OTA to 4.1.83.
And what do you mean Gingerbread?
Unless you flashed to 2.3.4 HKTW you don't have Gingerbread.
CaelanT said:
And what do you mean Gingerbread?
Unless you flashed to 2.3.4 HKTW you don't have Gingerbread.
Click to expand...
Click to collapse
commonsense suggests that, that's what he means.
Sent from rooted Atrix on 2.3.4 with unlocked bootloader using xda premium app.
alexrita said:
Hi guys after having upgraded my AT & T Motorola Atrix gingerbread to version 1.83 I get this error: failed to boot 4.
how do I reset the phone? thanks
Click to expand...
Click to collapse
Failed to boot 4
me too,help!!!
help!!!
help!!!
help!!!
veafin said:
Failed to boot 4
me too,help!!!
Click to expand...
Click to collapse
What did you flash, and how? Is your phone unlocked?
I suspect "Failed to boot 4" is when a filesystem is missing a signature. (And "2" is when the signed hash doesn't match the data)
If you are using RSD and a Motorola .sbf, shouldn't be a problem. Please explain in detail what you have done. If you want a quick fix, after flashing 4.1.83 SBF, if you still have this problem, go back and flash The2d's PUDDING (unlocked BL.)
(This fix will only work if you have unlocked your phone.. but the only way you could get this error is if you are trying to use fastboot without first unlocking your phone, or you are manually editing boot/recovery, or making .sbf files yourself...)
Please provide clear, concise details of what you've done.
eval is right, I got both failed to boot 4 and 2 in the past
if you have an att atrix you just need to flash 1.2.6 sbf then the 1.8.3 over it, unclok your bootloader then flashboot will go.
My cell phone is Hong Kong release, flashed Chinese simplified ROM,"掘墓者ME860国行官方ROM_OLYGC_U4_1.21.0.DearTanker"
when the tip is：
SVF:105:1:2
Failed to boot 0x1000
can't get the "RSD" and "fast boot"mode.
What can I do?
Same here...got "Failed to boot 4" error...
I had leaked 2.3.4 HKTW installed
I was trying to move back to 2.2...Keep getting errors when flashing to 1.2.6 as well...failing at the step where it says "Switching the device to BP mode"....Please help....
Hi,
I got that error when I had an sbf flashed and then I flashed a system.img from another firmware. Such a mismatch would also occur if an sbf was interrupted.
Cheers!
veafin said:
My cell phone is Hong Kong release, flashed Chinese simplified ROM,"掘墓者ME860国行官方ROM_OLYGC_U4_1.21.0.DearTanker"
when the tip is：
SVF:105:1:2
Failed to boot 0x1000
can't get the "RSD" and "fast boot"mode.
What can I do?
Click to expand...
Click to collapse
You cannot boot into RSD by holding volume-up on start?
We are lucky, when our phones fail signature/hash check, we are dropped directly into RSD mode. This seems not to be the case for you. Also, this message "Failed to boot 0x1000" is new to me, and so far seems only to have happened to ME860 users. I suspect fastboot gets the kernel (or something else?) loaded into memory at 0x1000, see:
Code:
000D173C .Unrecoverable bootloader error (
000D1760 [Fastboot]: Fastboot Entry
000D1784 Point ..Failed to boot 0x1000..LOG.
in bootloader CG from an extracted SBF. But... fails to boot kernel/microBoot? Hard to understand how a signed CG, which passed the check for your Boot ROM (same encryption keys) can have a kernel/? that does not boot on your hardware. Unless Moto has used similar keys with some hardware changes that means that .sbfs from international ROMs are not purely interchangeable? =(
And this is strange, since fastboot gives this error, so it is alive and in memory, should take some input: hopefully booting power-on + volume-down would be enough to get the menu of options, which includes RSD, same for booting power-on+volume-up key ? The inability to get into any fastboot / RSD menu looks like it could be a serious Moto bug... I hope whoever posted that SBF puts a huge WARNING for users of your model of phone...
I forgot to ask the 0x1000 people...
During any point during boot, does the device show up in usb? Command "watch -n .2 lsusb" in linux would do..
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
Look here,Please:http://forum.xda-developers.com/showthread.php?p=14673911
Again, do you ever see it appear on usb? In linux
# watch -n .1 lsusb
and keep your eyes open for Motorola PCS
That is your only hope... if we cannot even communicate with the phone via usb, well, it is pretty much a hard-brick.
Who made this [email protected]! Others are OK with it??
veafin said:
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
Look here,Please:http://forum.xda-developers.com/showthread.php?p=14673911
Click to expand...
Click to collapse
Hello Xda users.
A n00b incoming -
I am working on a project - where I need the Motorola Razr maxx to use Android 2.3.X, because of some software issues, when I upgraded the phone to 4.0.4.
So I tried to downgrade ( I know alot of ppl - are saying it cant be done ) but I tried anyway - my team and I dont have the time til wait for a software upgrade because of the deadline for the project.
First I tried google and did use:
http://forum.xda-developers.com/showthread.php?t=1586570&highlight=search+this+forum
to root the phone - didnt work.
Tryed to flash it with RSD = fail.
I did get it Rooted.
Then I tried too use
http://droidrazrroot.com/droid-razr...ted-droid-razr-back-to-android-2-3-66-12-173/
to flash it - but but it failed.
Now I got a screen with,
Invalid Flash Mode (S) (Boot Failed)
0A.6C
To return to normal mode - first press power key to power down
Device is Locked. Status Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected.
Invalid CG OTV (CG: system); Invalid SP Data
Invalid CG Version(CG: system)
Invalid CG OTV (CG: system)
After I had google this, I understand I need to flash the phone with the rigth ROM,
Iam from Denmark and phone is bougth here.
I have tried all european ROMS from :
http://forum.xda-developers.com/showthread.php?t=1362956
and mounted the XML with RSD lite - but it failing.
Where do I get a ROM I can used with RSD ?
Iam sorry if I have posted this in thw wrong section.
// Fiskeren
Not wrong section but wrong device. There is a lot of good information on www.droidrzr.com
Sent from my DROID RAZR using Tapatalk 2
I bought my Razr M XT907 online. It's JellyBean with sys ver. 98.12.4.XT907.Verizon.en.US.
I tried many methods to root it and finally succeeded. But now I got another flash failure
problem: Each time I reboot i get into the following screen:
AP Fastboot Flash Mode (S)
10.9B
Device is LOCKED, Status Code:0
Battery OK
Tansfer mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected.
If I press power, volume up and volue down simultaneously and select nomal powerup, I can get
pass the flash failure screen. But i have to do it every time.
I am from China and use China Telecom(CDMA) network.Kindly please tell me:
How to fix the flash failure? I did not an exact answer on google. Is DroidRazrUtility1.82
available? And UnbrickXT912Jellybean? Will I lose the China Telecom(CDMA) 3G service?
Thanks in advance.
I have fixed the flash failure error by flashing boot logo.
Please search Sports Themed Boot Logos on droidrzr for details cause i am new and not allowed to post outside link.
Help maybe...
betasu said:
I bought my Razr M XT907 online. It's JellyBean with sys ver. 98.12.4.XT907.Verizon.en.US.
I tried many methods to root it and finally succeeded. But now I got another flash failure
problem: Each time I reboot i get into the following screen:
AP Fastboot Flash Mode (S)
10.9B
Device is LOCKED, Status Code:0
Battery OK
Tansfer mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected.
If I press power, volume up and volue down simultaneously and select nomal powerup, I can get
pass the flash failure screen. But i have to do it every time.
I am from China and use China Telecom(CDMA) network.Kindly please tell me:
How to fix the flash failure? I did not an exact answer on google. Is DroidRazrUtility1.82
available? And UnbrickXT912Jellybean? Will I lose the China Telecom(CDMA) 3G service?
Thanks in advance.
Click to expand...
Click to collapse
I think if you flash it and remove the usb cable before it's completely rebooted after the flash the fastboot sticky bit gets stuck. There's also discussion about removing the <GETVAR> lines in the XML file. I'm not sure if the flash actually goes through, but may be reporting to the bootloader a failed flash.
My advice is to remove the <GETVAR> lines in the .XML file, flash, and wait until the phone has completely rebooted and RSD reports a PASS before unplugging the USB Cable.
dtrud0h said:
I think if you flash it and remove the usb cable before it's completely rebooted after the flash the fastboot sticky bit gets stuck. There's also discussion about removing the <GETVAR> lines in the XML file. I'm not sure if the flash actually goes through, but may be reporting to the bootloader a failed flash.
My advice is to remove the <GETVAR> lines in the .XML file, flash, and wait until the phone has completely rebooted and RSD reports a PASS before unplugging the USB Cable.
Click to expand...
Click to collapse
I keep getting flash failure every time. I looked in the xml and see no getvar to remove. If anyone can point me in the right direction id appreciate thank you in advance.
\
I need Help BADLY
dtrud0h said:
I think if you flash it and remove the usb cable before it's completely rebooted after the flash the fastboot sticky bit gets stuck. There's also discussion about removing the <GETVAR> lines in the XML file. I'm not sure if the flash actually goes through, but may be reporting to the bootloader a failed flash.
My advice is to remove the <GETVAR> lines in the .XML file, flash, and wait until the phone has completely rebooted and RSD reports a PASS before unplugging the USB Cable.
Click to expand...
Click to collapse
My Phone which is the exact same kind Droid Razr M non Developers model on Verizon won't even show up in RSD how do i get it to show up?
Im running windows 8 64 bit
Please Help this is my thread
The quickest way to get rid of that is to have a good flash. I suggest flashing the boot logo to fix this problem. Follow the directions here - http://aosp.us/?p=260
betasu said:
I bought my Razr M XT907 online. It's JellyBean with sys ver. 98.12.4.XT907.Verizon.en.US.
I tried many methods to root it and finally succeeded. But now I got another flash failure
problem: Each time I reboot i get into the following screen:
AP Fastboot Flash Mode (S)
10.9B
Device is LOCKED, Status Code:0
Battery OK
Tansfer mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected.
If I press power, volume up and volue down simultaneously and select nomal powerup, I can get
pass the flash failure screen. But i have to do it every time.
I am from China and use China Telecom(CDMA) network.Kindly please tell me:
How to fix the flash failure? I did not an exact answer on google. Is DroidRazrUtility1.82
available? And UnbrickXT912Jellybean? Will I lose the China Telecom(CDMA) 3G service?
Thanks in advance.
I have fixed the flash failure error by flashing boot logo.
Please search Sports Themed Boot Logos on droidrzr for details cause i am new and not allowed to post outside link.
Click to expand...
Click to collapse
---------- Post added at 03:21 PM ---------- Previous post was at 03:20 PM ----------
You need the correct drivers installed and the device needs to be put in AP Fastboot mode.
jekovenatinsley said:
My Phone which is the exact same kind Droid Razr M non Developers model on Verizon won't even show up in RSD how do i get it to show up?
Im running windows 8 64 bit
Please Help this is my thread
Click to expand...
Click to collapse
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Hi, I have exactly the same problem. Have you resolved it ? Ty
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Did u try to request a bootloader unlock key at Moto's Website and try unlocking?
I know its sounds a bit stupid but sometimes it works. One of my friend said he did it so just give it a try!
TheWarrior01 said:
Did u try to request a bootloader unlock key at Moto's Website and try unlocking?
I know its sounds a bit stupid but sometimes it works. One of my friend said he did it so just give it a try!
Click to expand...
Click to collapse
Thanks for the response but here is what happens. When I try to get the key I need to run this command:
Code:
fastboot oem get_unlock_dat
I should get a bunch of numbers and letters and numbers in response which I then send to motorola which motorola analyzes and gives me the unlock key. But when I run this command I get this error:
Code:
C:\Minimal ADB and Fastboot>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.120s
I am glad that you are trying to help but sadly it is not that simple.
TsiaoTai said:
Hi, I have exactly the same problem. Have you resolved it ? Ty
Click to expand...
Click to collapse
I have a suspision I need to somehow remove the bootloader and reinstall an unlocked one. That is my latest guess. But so far I haven't been able to fix it.
Uio443 said:
I have a suspision I need to somehow remove the bootloader and reinstall an unlocked one. That is my latest guess. But so far I haven't been able to fix it.
Click to expand...
Click to collapse
Good luck with that. If remediation were that simple device security would be a joke.
Given the oem unlock data responses you posted I'd say your device is toast. Hope I am wrong.
Davey126 said:
Good luck with that. If remediation were that simple device security would be a joke.
Given the oem unlock data responses you posted I'd say your device is toast. Hope I am wrong.
Click to expand...
Click to collapse
I hope so too.
Try Using a Different Cord. Also just for confirmation, You have Moto drivers Installed? Try using different PC + ADB.
Also see this thread and post your Info: https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Bootloader-Unlock-Problems/m-p/3222809 .
If that doesnt work, take it to service center and tell after update it happened. (Dont Mention you trying to blank flash) Also, Before hand, Tweet to Official moto and moto(country) specific page. Tell them your device aint working after update. They wil tell you mail them(most of the times) and then mail them. Wait for 1 Day for reply and then go to service Center.
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Hi, I don't know if you solve your problem but I have the same and I thought about using an edl cable : https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 to go in edl mode and then flash the ROM with QFIL. Could be worth ?
Another question; is your phone is recognized by RSD Lite ? If yes, have you tried to flash stock ROM via RSD ?
TsiaoTai said:
Hi, I don't know if you solve your problem but I have the same and I thought about using an edl cable : https://www.amazon.com/cable-Qualcomm-phones-Flash-called/dp/B01NAMYW84 to go in edl mode and then flash the ROM with QFIL. Could be worth ?
Another question; is your phone is recognized by RSD Lite ? If yes, have you tried to flash stock ROM via RSD ?
Click to expand...
Click to collapse
The cable may be worth trying. I will so thanks for telling me. I have tried a few versions of RSD Lite but my phone is not recognized.
Is yours recognized by RSD Lite?
Uio443 said:
The cable may be worth trying. I will so thanks for telling me. I have tried a few versions of RSD Lite but my phone is not recognized.
Is yours recognized by RSD Lite?
Click to expand...
Click to collapse
Nope, mine not recognized either and I tried different versions of RSD on different supports ( Windows xp, 7, 10 and Linux )
I'll buy the cable tommorow, I'll tell you
Otherwise i try to find my Bootloader unlock code to re-unlock it but no trace of this code on my PC...
By the way, in order to Blank flash your bootloader, which file did you used ? I think the BlankFlash files we used were not adapted to our phone model
TsiaoTai said:
Nope, mine not recognized either and I tried different versions of RSD on different supports ( Windows xp, 7, 10 and Linux )
I'll buy the cable tommorow, I'll tell you
Otherwise i try to find my Bootloader unlock code to re-unlock it but no trace of this code on my PC...
By the way, in order to Blank flash your bootloader, which file did you used ? I think the BlankFlash files we used were not adapted to our phone model
Click to expand...
Click to collapse
Hello,
Did you get the cable, and if so then did anything work for you?
I have ordered the cable but it will take a very long time to ship (estimated oct9-dec4).
In other words, did anything work for you?
Uio443 said:
Hello,
Did you get the cable, and if so then did anything work for you?
I have ordered the cable but it will take a very long time to ship (estimated oct9-dec4).
In other words, did anything work for you?
Click to expand...
Click to collapse
Sorry, totally forgt the topic The cable didn't work for me, I hope you will get better results.
I'm done spending hours searching answers on google, I gave up
Good luck !
TsiaoTai said:
Sorry, totally forgt the topic The cable didn't work for me, I hope you will get better results.
I'm done spending hours searching answers on google, I gave up
Good luck !
Click to expand...
Click to collapse
Damn, that really sucks. I will let you know if I am able to fix it as soon as I get the cable.
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Flash from fastboot gpt.bin and the rest oficina firmware stock for your phone, try whith Is info
https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797
Uio443 said:
I got this moto g4 play a few months ago. I decided to finally install this security update because I decided that nothing will go wrong. I clicked install and went to eat. When I came back the screen was block and no buttons worked. I figured out that I needed to blank flash this bootloader. After 2 hours of trying it worked. I got into the bootloader. The thing is that the bootloader came locked and I cannot access my recovery or android. To unlock the bootloader I need to check the "allow oem unlock" in developper settings on android. BUT I DO NOT HAVE ANDROID. Now I'm stuck. Can anyone please help! Thanks.
(By the way it is XT1601)
Log:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Failed to initialize partition table
CID Read Failure
Invalid CID status 0x69
USB connected
Click to expand...
Click to collapse
Take it to your service center
I bought a Motorola Moto C Plus a while ago so I can root it and play around with it. I tried to unlock the bootloader for a while on this phone but I just can't. Every guide I tried didn't work. From mfastboot to MTKClient.
mfastboot just gave "unknown command" when trying to get unlock data, and MTKClient couldn't detect a partition or something when trying to wipe.
Then I tried searching my serial number: ZW2224XFWW, but that gave no results. Not on Google nor on here. Can anybody help. I'm very new to the rooting scene.
EDIT: I have a Moto C Plus with 1GB RAM and 16GB internal storage
MTKClient works, download the live .iso file from https://github.com/bkerler/mtkclient
Boot from it, open a console and type:
pip3 install -r requirements.txt
First just follow the readme to unlock the bootloader and after that root with latest magisk. I just tested all that on a moto C, I don't have the exact model but it was the 8gb/1gb variant.
Something's going terribly wrong because now it hangs at 43.8% while flashing boot partition and i dont know why
(I'm scared...)
MarkPCExpert said:
Something's going terribly wrong because now it hangs at 43.8% while flashing boot partition and i dont know why
(I'm scared...)
Click to expand...
Click to collapse
After further investigation, this happens also at recovery and maybe also other partitions so now it is soft bricked
EDIT: it seems that the connection stops or something because after it fails flashing, i also cant do other operations. I NEED HELP!!!
EDIT 2: after trying the console instead of the gui, i discovered that it was never unlocked in the first place. It said "unknown seccfg partition header, aborting unlock"
You are going to know you have your bootloader unlocked if you see a white letters on black background message saying that the phone will boot in 5 seconds after turning it on. You can't flash anything with a locked bootlader.
THATS EXACTLY WHAT I'M GETTING!!! But still, i can't flash a single thing. and I dont know why. I tried to flash TWRP recovery to install a lineageos build but TWRP hangs at 88%. And the patched magisk thingy hung at 43.8%
Now the phone is kind of bricked.
EDIT: Maybe the hang is because i use USB 2 or the Live ISO on a not so good USB. I do use an upgraded Dell OptiPlex 3010 as my main machine. Or the hang is bcuz it failed to flash.
Reflash the original firmware and try again. If you did a backup just flash the original boot.bin
Welp. I am screwed. I forgot i was running a live USB so the entire backup is gone.
And the userdata was also empty for the most part.
Try this: https://www.motorola.com/us/rescue-and-smart-assistant/p
If that doesn't work see if you can find a stock firmware and flash with flash tool. https://androidfilehost.com/?fid=889964283620774903
I already tried that one, but when i plug it in, it doesnt do anything and I DONT KNOW WHY!
also im on vacation
UPDATE: im back from vacation and no replies, great...
BUT, ive chosen a mostly aosp based rom for the phone.