Database Users

How to install CM9 -- brick proof -- guaranteed :)

Galaxy Note N7000.
Was running stock ICS-ROM Samsung.
Always wanted to install and use a custom ROM but was always afraid of BRICKS..
But yesterday ended up being sucessfully running CM9.
Steps I undertook were as follows:
1. Installed Samsung Kies.
2. Check for update from Samsung Kies and updated Kies.
3. Connected my phone to Kies and checked if Kies detected the phone properly.
After sucess, exit Kies.
4. Downloaded PC Odin from this link
http://forum.xda-developers.com/attachment.php?attachmentid=815370&stc=1&d=1323799721
password:samfirmware.com
5. Download pre rooted GingerBread ROM
SGN_XX_OXA_KJ1_FACTORYFS.zip (thx dr.ketan)
http://d-h.st/HJM
6. Run PC odin
7. Reboot Note in download mode
vol. down+home+power buttons
8. Connect Download mode note to PC
9. PC odin ID:COM turns yellow:
(ALL THE BEST NOW)
10. In PC ODIN
Auto Reboot and F.Reset Time ---> Ticked
Others --> Unticked
10. Click PDA and select the SGN_XX_OXA_KJ1_FACTORYFS.zip you had downloaded.
Click start.
Wait for 10minutes.
Your phone will restart.
11. WOW..!!! now ur on a GB Rom
And its a safe kernel
Now you can play around
Plus already rooted
12. Now to get this GB Rom working
go to recovery mode (vol up + home + power)
clean dalvik cache and wipe data and factory reset
13. Time to install CM9
14. Download
CM9 latest nightly:
http://get.cm/?device=n7000
Googleapps:
http://goo.im/gapps/gapps-ics-20120429-signed.zip
15. Copy these 2 files in the internal SD card anywhere (do not rename)
16. Reboot into recovery mode:
vol up + home + power
17. Flash the 2 files from where you saved them:
"install zip from sd card" option in recovery mode
now flash cm9 file
then flash gapps file
18. DO A DATA WIPE / FACTORY RESET
19. Reboot
And wow..
Enter the world of custom ROMS
[[[to switch to another ROM, follow steps 1 to 17, and after that flash the ROM of your choice]]]

Steps 6 and 9
it shud be PC Odin Not Mobile

sorry dr. ketan
my mistake
corrected
thanks

So...
So i have galaxy note gt n700 purchased in germany and brickbug app said that i have dangeros ...something something.... I mean i have mmc bug which will make my phone in paperpress if i mess up. Question is: does step by step guide is safe for my mmc bug? Can i safely follow it and not ruin my phone, because i think i have a bad warranty.

dr.ketan said:
Steps 6 and 9
it shud be PC Odin Not Mobile
Click to expand...
Click to collapse
Noticed that u are very experienced contributor, so mybe u can answer on my question, does the step by step guide is safe for galaxt note with brickbug? I realy want to flash, but i want to do it if i am on the safe side

Latvianization said:
So i have galaxy note gt n700 purchased in germany and brickbug app said that i have dangeros ...something something.... I mean i have mmc bug which will make my phone in paperpress if i mess up. Question is: does step by step guide is safe for my mmc bug? Can i safely follow it and not ruin my phone, because i think i have a bad warranty.
Click to expand...
Click to collapse
Yes, you can follow this guide safely. Actually, this is the best guide I've seen so far, I wish I had this one the moment I wanted to start messing around with my phone because I spent more than 48 hours total reading and reading and getting more confused each time.
So go ahead and do it.
And thank you to the OP for putting this up.
Sent from a GNote, hell yeah!

SirRhor said:
Yes, you can follow this guide safely. Actually, this is the best guide I've seen so far, I wish I had this one the moment I wanted to start messing around with my phone because I spent more than 48 hours total reading and reading and getting more confused each time.
So go ahead and do it.
And thank you to the OP for putting this up.
Sent from a GNote, hell yeah!
Click to expand...
Click to collapse
And the last one, probably silly question, what CM9 rom is this? Will i have GB or ICS? And if thats GB where can i find safe ICS rom?

Before Galaxy Note, I used to rock HTC Wildfire and didn't wanted to mess around with custom roms because it was just low-end device. Third-party launchers did the job for me when it comes to customization.
When I bought Galaxy Note, I was looking forward to flashing Cyanogenmod or maybe something different (I like Paranoid Android rom and the hybrid mode). I was very disappointed to see that there is a brick bug.
Even though I'm a IT engineer and I have been using computers since Commodore 64, I don't have experience in flashing custom roms so this post is very useful if it's the best way to do it.
Do I have to flash different stock GB before rooting, because I have XXLA6 kernel (baseband: xxla4) and I believe that this version is not directly rootable? Correct me if i'm wrong?
What is the best way to return from custom rom (ie. CM9) to stock GB?
In fact, I've been reading for a good amount of time today but there is just too much information, so sorry for the noobish questions.

I installed rom before 2 days and had similar doubts.
Just want to share what problem I faced :
The mobile should be in ON state when rooting CF I was doing it in OFF download mode

Latvianization said:
And the last one, probably silly question, what CM9 rom is this? Will i have GB or ICS? And if thats GB where can i find safe ICS rom?
Click to expand...
Click to collapse
CyanogenMod 9 is based on ICS, CM7 is based on Gingerbread. There wasn't a CM8 because Google never released the source code for Honeycomb.
And what you need is a safe kernel, because the kernel is what sends a erase command to a chip inside the phone and that's when you brick it (I think). That happens when you do a factory reset.
Now, what I always do when I want to change ROMS is to use AbbysNote 4.2 as a safe GB kernel so I can then flash the ROM/Kernel of my choice.
You can find it here: http://forum.xda-developers.com/showthread.php?t=1362424&highlight=abyssnote
So let's say you want to go from CM9 to LiquidSmooth (or pretty much any other), which is the one I use now:
You go to CWM recovery, from there you flash AbyssNote.
Once the flashing is completed, you DO NOT exit CWM, instead you go to "Advanced" and then "Reboot to Recovery" so the phone will restart but it will go directly to CWM again, but now with AbyssNote installed.
AbyssNote has a TOUCH based recovery, so it is easier to use. Don't use the physical power and volume buttons to navigate.
From there you can safely do a factory reset, format cache, format Dalvik, flash a new ROM and Kernel.
AbyssNote will then disappear because it will be overwritten by the new Kernel of your choice. So every time I want to change to a new ROM, I repeat the steps above I haven't had any problems whatsoever.
I hope I'm right with my technicalities, but the procedures the OP and I describe are safe to try as long you follow the exact instructions, so before you try anything, read and re-read and you will be just fine.
---------- Post added at 12:38 PM ---------- Previous post was at 12:34 PM ----------
tribalkg said:
Before Galaxy Note, I used to rock HTC Wildfire and didn't wanted to mess around with custom roms because it was just low-end device. Third-party launchers did the job for me when it comes to customization.
When I bought Galaxy Note, I was looking forward to flashing Cyanogenmod or maybe something different (I like Paranoid Android rom and the hybrid mode). I was very disappointed to see that there is a brick bug.
Even though I'm a IT engineer and I have been using computers since Commodore 64, I don't have experience in flashing custom roms so this post is very useful if it's the best way to do it.
Do I have to flash different stock GB before rooting, because I have XXLA6 kernel (baseband: xxla4) and I believe that this version is not directly rootable? Correct me if i'm wrong?
What is the best way to return from custom rom (ie. CM9) to stock GB?
In fact, I've been reading for a good amount of time today but there is just too much information, so sorry for the noobish questions.
Click to expand...
Click to collapse
This is the thread you need to read: http://forum.xda-developers.com/showthread.php?t=1329360

Thanks for the useful information and for putting to rest some of my safety concerns.
Now you've wetted my appetite and I have to give it a go soon.
Sent from my GT-N7000 using xda premium

Thanks for this great guide! I haven't gotten my Note yet as I just ordered it yesterday but I have been lurking around the forums already and trying to understand how flashing roms and kernels works around here. Like someone already said before some of the guides / threads are 'a little' confusing for newcomers. I was really confused with the brick bug that people were writing about. This thread clarified things a lot for me and I believe it will help many more Note-newbies!
So, new Note community member reporting to duty here! :highfive: It's gonna be pretty neat upgrade considering from what phone I come from. Well, the Huawei at least was great step stone to android world gotta admit. I just got somewhat bored with the not so great custom scene.

SirRhor said:
This is the thread you need to read: http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Believe me, I know about that thread.
One more question for you. Does flashing abyss kernel bring yellow triangle and raise binary counter? I've heard on one of Zedomax's channels on youtube that he recommends flashing this kernel whenever you need to move from one ROM to another.
Cheers mate!

tribalkg said:
Believe me, I know about that thread.
One more question for you. Does flashing abyss kernel bring yellow triangle and raise binary counter? I've heard on one of Zedomax's channels on youtube that he recommends flashing this kernel whenever you need to move from one ROM to another.
Cheers mate!
Click to expand...
Click to collapse
Dont worry about AbyssNote, is safe in both respects. That's the one I always use to do anything that is flashing related.
If, for some reason, you start seeing that dreaded triangle at boot, you can use TriangleAway from Chainfire on Google Play.
Sent from a GNote, hell yeah!

Thanks bro, I appreciate the effort to answer these noobish questions.
I will stay on CM9 (and CM10 when it comes) as long as is stable to use it as a daily driver. I don't like the TW interface and I don't need all that S-Pen stuff and pressure sensitivity. Apps from the Play Store are enough for me (Papyrus for example) so there's no need to stay on stock rom.

tribalkg said:
Thanks bro, I appreciate the effort to answer these noobish questions.
I will stay on CM9 (and CM10 when it comes) as long as is stable to use it as a daily driver. I don't like the TW interface and I don't need all that S-Pen stuff and pressure sensitivity. Apps from the Play Store are enough for me (Papyrus for example) so there's no need to stay on stock rom.
Click to expand...
Click to collapse
Dont worry, I'm glad I can help you.
You can try Marker and Jotter as well, they work well.
Sent from a GNote, hell yeah!

thanks
thanks for the guide.

I have the brickbug firmware also. So am I correct in assuming that if I follow these directions and flash a different GB rom that I will be okay?
Will flashing this India GB rom change my kernel to a more stable one?
And if I flash this India GB rom will it be able to update to ICS through Kies or OTA?
I'm not new to flashing as I used to rom my EVO a lot... I just haven't done it in about a year and this brickbug mess has me standoff-ish.
Sent from my GT-N7000 using Tapatalk 2

maddog2727 said:
I have the brickbug firmware also. So am I correct in assuming that if I follow these directions and flash a different GB rom that I will be okay?
Will flashing this India GB rom change my kernel to a more stable one?
And if I flash this India GB rom will it be able to update to ICS through Kies or OTA?
I'm not new to flashing as I used to rom my EVO a lot... I just haven't done it in about a year and this brickbug mess has me standoff-ish.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
If you are on GB already, you just have to root the ROM and flash CWM because the brick bug is present only on ICS kernels. 99% sure.
There are some GB Stock ROMs that you cannot root directly, so it depends.
OTA updates from Samsung to ICS I'm not sure, you should ask someone else. When I got my Note it already had ICS, so I never did an OTA update. I don't use Kies at all.
I was very weary at first too, but with the instructions above you will be fine.
Sent from a GNote, hell yeah!

I've followed the guide from OP and now I'm rockin' CM9! No problems at all.
My content on the internal memory was intact (apps data, games data, etc), it's all there and I've flashed Indian ROM and then CM9. Have I made a mistake or what?

Flash ROM & some crazy nintendo graphics

Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!

Same issues apon using The Samsung Galaxy S4 for Verizon (jfltevzw) Build MK2 rooted using vRoot (English) and using safestrap. if needed I can upload the safestrap apk or version. If I install any type of AOSP ROM the boot logo is either missng or baby blue with wierd static lines. AOKP is the only AOSP ROM that eventually boots (with static boot logo) but no wireless works, and this is the same wether MK2 and/or MJ7 modules are installed or not. the only rom I can successfuly install and use daily that has no bootloader based issues is Hyperdrive ROM For jfltevzw & jflteatt. Any info would be much apreciated!
Sent from my SCH-I545 using xda app-developers app

^ Interesting. I didn't expect anyone else to have this issue. I never read about it before. I really feel like it has something to do with SafeStrap.

Heath Cliff said:
Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!
Click to expand...
Click to collapse
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.

REEEEEEAAAAADDDD!!!!
It's been very well documented that AOSP does not work with safestrap. Neither does loki. There currently is no way/fix to flash AOSP.
So
1. No AOSP or GPE
2. No loki
3. No flashing custom kernels
Sent from my GT-I9505 using Tapatalk

John The Rhino said:
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.
Click to expand...
Click to collapse
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA

Heath Cliff said:
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA
Click to expand...
Click to collapse
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.

John The Rhino said:
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.
Click to expand...
Click to collapse
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again

Heath Cliff said:
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again
Click to expand...
Click to collapse
Hey man I totally understand. It's hard to watch all these other roms pop up for the original S4 & we can't flash them. But we no longer have to suffer with only the stock rom option since Hashcode's brilliant Safestrap was released. Once you get use to it, the ability of being able to multi-boot roms really kind of makes up for the locked boot loader. Soon though, we will have 4.4 Kit Kat & then we can start this process of getting off the stock rom all over again. Right? It could be worse, we could have I-phones. We do have a ever growing number of great custom TW based roms available to us here for our device. So try them, you'll be surprised how much better your phone performs. Glad I made sense & forgive my bluntness that's just how us Rhinos roll.

SGH-I337M custom rom?

need advice on which fully functioning rom will work on my rogers galaxy s4?also how to root?unlock?I have flashed htc windows devices years ago but pretty new to android,was reading one thread but like a thousand pages,wow!!!any advice would be apreciated.

Best place to start is here: http://forum.xda-developers.com/showthread.php?t=2314494
As for ROM recommendations, that's one you'll have to find on your own. We generally don't allow recommendations on threads lest they attract trolls/fanbois and hijack your thread. Besides... you'll never find what you like if you don't explore a little bit.
Best of luck and welcome!

[email protected] said:
need advice on which fully functioning rom will work on my rogers galaxy s4?also how to root?unlock?I have flashed htc windows devices years ago but pretty new to android,was reading one thread but like a thousand pages,wow!!!any advice would be apreciated.
Click to expand...
Click to collapse
For rooting, look up CF-auto root or kingo root, CF-auto uses odin pc so you may want to read up on that, I use version 3.07, others have used 3.09. For rom choices, you want to make sure you are selecting a rom for i337m, there are also roms for i337 which is the at&t version, if it doesn't specify Canada or i337m I would stay away from it. There are ASOP (sort of a vanila rom) and touch wiz roms suggest you read up on the differences. To flash any rom you need a custom recovery, I use TWRP version 2.6 some say to use 2.5 and I would suggest staying away from the latest and greatest since I have seen a lot of issues using the newest versions. Some people use Philz recovery which I am not familiar with but have seen quite a few successes with it. The last option is clockwork recovery, though I have used it in the past it can be finicky and I have seen people have a few issues with it. Lastly unlocking, if you going to unlock, I would skip all the free methods and use a reputable service like unlocker.com or something like that.... again read up before hand.
Best advice I can give, if your going to try something, read a lot make sure you know what your doing and be paitent, some processes look like they are doing nothing but allow them to finish.....

Gage_Hero said:
For rooting, look up CF-auto root or kingo root, CF-auto uses odin pc so you may want to read up on that, I use version 3.07, others have used 3.09. For rom choices, you want to make sure you are selecting a rom for i337m, there are also roms for i337 which is the at&t version, if it doesn't specify Canada or i337m I would stay away from it. There are ASOP (sort of a vanila rom) and touch wiz roms suggest you read up on the differences. To flash any rom you need a custom recovery, I use TWRP version 2.6 some say to use 2.5 and I would suggest staying away from the latest and greatest since I have seen a lot of issues using the newest versions. Some people use Philz recovery which I am not familiar with but have seen quite a few successes with it. The last option is clockwork recovery, though I have used it in the past it can be finicky and I have seen people have a few issues with it. Lastly unlocking, if you going to unlock, I would skip all the free methods and use a reputable service like unlocker.com or something like that.... again read up before hand.
Best advice I can give, if your going to try something, read a lot make sure you know what your doing and be paitent, some processes look like they are doing nothing but allow them to finish.....
Click to expand...
Click to collapse
thanks for the help,how do I find the canadian roms?

[email protected] said:
thanks for the help,how do I find the canadian roms?
Click to expand...
Click to collapse
All S4 ROMs run on all variants, with the exception of the i9500 octa core version. So you can flash anything, but the ROMs in the development section here that mention jfltecan or Canadian S4 or I337m are the best. I've also heard T-Mobile ROMs are the next best for you, and keep in mind there are also the unified ROMs with one zip for all variants.

The iB4STiD variants have been working great for me. The GPE and TW versions.

Read this http://forum.xda-developers.com/showthread.php?t=2314494 3 or 4 times. Familiarize yourself with kernels and roms that work with i337m. Read as much as you can. The general section has so much useful info. Good luck.
Sent from Canadian i337m using Tapatalk

samy deluxe for i9505
Sent from my GT-I9505 using XDA Premium HD app

I've had it...

Help...please.
Rooting this phone is a convoluted bunch of bull****.
I am on OC4. I need to downgrade. Yet every tutorial I go to is full of broken links for the files I need and over a year old.
So far I have these as steps.
1. Downgrade via Odin somehow, not sure what file to use for that, as most links are broken af due to their age. I have Odin 3.10.
2. Towelroot.
3. Recovery
4. Custom rom, going Cyanogen.
5. I have seen threads mentioning having to downgrade my Kernel? Where does that fit in?
Before you ask I have searched google and this forum first, as per protocol. I probably didn't look hard enough.
I am not asking for a step by step, just updated links or tutorials, and maybe some info on what I have right and wrong.
I am NOT NEW to rooting android phones. Rooted the last 5 I've owned starting with the G1.
Thanks in advance. Sorry for the noobness. This S5 isn't like my 4G LTE or Droid Incrdible, but it is still pissing me off.

Honestly77 said:
Help...please.
Rooting this phone is a convoluted bunch of bull****.
I am on OC4. I need to downgrade. Yet every tutorial I go to is full of broken links for the files I need and over a year old.
So far I have these as steps.
1. Downgrade via Odin somehow, not sure what file to use for that, as most links are broken af due to their age. I have Odin 3.10.
2. Towelroot.
3. Recovery
4. Custom rom, going Cyanogen.
5. I have seen threads mentioning having to downgrade my Kernel? Where does that fit in?
Before you ask I have searched google and this forum first, as per protocol. I probably didn't look hard enough.
I am not asking for a step by step, just updated links or tutorials, and maybe some info on what I have right and wrong.
I am NOT NEW to rooting android phones. Rooted the last 5 I've owned starting with the G1.
Thanks in advance. Sorry for the noobness. This S5 isn't like my 4G LTE or Droid Incrdible, but it is still pissing me off.
Click to expand...
Click to collapse
There are no Cyanogen ROMs for our phones, since that requires a different kernel than our locked bootloader can accept. Which ROM do you want to use? I'll see if I can put together a quick guide for you. I personally use Freedom ROM, which currently uses an OC4 base.

Right here buddy 3rd post. Most of this stuff is pretty easy you just have to read threw the threads.
http://forum.xda-developers.com/verizon-galaxy-s5/help/samsung-user-lollipop-to-root-t3092863

Thanks and that thread never appeared in my searches. That and I don't have time to go through thousands of results. It'd take me longer than this did. Also. Cyanogen for galaxy s5
.
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-12-1-android-5-1-t3066252
freedom rom and alliance rom look good. So one of those if cyanogen doesn't work.

Honestly77 said:
Thanks and that thread never appeared in my searches. That and I don't have time to go through thousands of results. It'd take me longer than this did. Also. Cyanogen for galaxy s5
.
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-12-1-android-5-1-t3066252
freedom rom and alliance rom look good. So one of those if cyanogen doesn't work.
Click to expand...
Click to collapse
yeah you can only use t-wiz base roms because of the bootloader.

Honestly77 said:
Thanks and that thread never appeared in my searches. That and I don't have time to go through thousands of results. It'd take me longer than this did. Also. Cyanogen for galaxy s5
.
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-12-1-android-5-1-t3066252
freedom rom and alliance rom look good. So one of those if cyanogen doesn't work.
Click to expand...
Click to collapse
Unless you bought a Developer edition with an unlocked bootloader, it's best to stay away from the Unified Development section. You'll just end up with your heartbroken, since they all require kernels that we can't get on our phone. Your best bet is to stick within the Verizon-specific development thread:
http://forum.xda-developers.com/verizon-galaxy-s5/development
And make sure you end up with the right firmware (bootloader, kernel, modem) that matches the ROM you choose! Otherwise, you won't boot up. It took me a few failed boots and attempts before I learned that the hard way.

Is lollipop worth it?

Hey guys!
Im a noob when it comes to installing ROMs and crap like that into phones (never done it), so even after looking at alot of threads about lollipop on s4 im wondering. Is it worth the time and effort i need to go through to get it because im running an unlocked version so i cant get updates from at&t. Chances of bricking? Oh and i was wondering do i need a sd card to do all of this? Can i do this from my phones internal storage?
Many thanks in advance.

TheJuli said:
Hey guys!
Im a noob when it comes to installing ROMs and crap like that into phones (never done it), so even after looking at alot of threads about lollipop on s4 im wondering. Is it worth the time and effort i need to go through to get it because im running an unlocked version so i cant get updates from at&t. Chances of bricking? Oh and i was wondering do i need a sd card to do all of this? Can i do this from my phones internal storage?
Many thanks in advance.
Click to expand...
Click to collapse
What system version are you currently on? Check your baseband in the About section of your settings. Depending on which it is, the process is different, but you can do it from internal storage either way.

DeadlySin9 said:
What system version are you currently on? Check your baseband in the About section of your settings. Depending on which it is, the process is different, but you can do it from internal storage either way.
Click to expand...
Click to collapse
Im on 4.4.2 1337UCUFNB1 atm and rooted using towelroot.
Still, is lollipop worth the effort to update from this?
If yes how do i go on about doing it so the chances of bricking are low? (I just got the phone and paranoid )
The tutorials ive seen gave some terminology im not up to par with it :/
Thank you for the help!

Is anyone there willing to help?
Pliz.

TheJuli said:
Im on 4.4.2 1337UCUFNB1 atm and rooted using towelroot.
Still, is lollipop worth the effort to update from this?
If yes how do i go on about doing it so the chances of bricking are low? (I just got the phone and paranoid )
The tutorials ive seen gave some terminology im not up to par with it :/
Thank you for the help!
Click to expand...
Click to collapse
It's mostly personal preference, but if you're already rooted then it's not very difficult to do. If you want to just use stock Lollipop with root it's as simple as install Safestrap, flash the OC4 ROM, and flash the kernel. I can get you links for that if you want. If you want a custom ROM, you'll have to also flash the SuperSU Beta file and the correct modules for either the OC3 or OC4 kernel, which isn't difficult. I can get you links if you want to go ahead with either of those, if you want a custom ROM though you'll have to pick one out yourself.

DeadlySin9 said:
It's mostly personal preference, but if you're already rooted then it's not very difficult to do. If you want to just use stock Lollipop with root it's as simple as install Safestrap, flash the OC4 ROM, and flash the kernel. I can get you links for that if you want. If you want a custom ROM, you'll have to also flash the SuperSU Beta file and the correct modules for either the OC3 or OC4 kernel, which isn't difficult. I can get you links if you want to go ahead with either of those, if you want a custom ROM though you'll have to pick one out yourself.
Click to expand...
Click to collapse
The stock lollipop please or just any lollipop that won't give me trouble like camera or bluetooth not working! So how do i do all what you mentioned there? Thanks a ton btw!

DeadlySin9 said:
It's mostly personal preference, but if you're already rooted then it's not very difficult to do. If you want to just use stock Lollipop with root it's as simple as install Safestrap, flash the OC4 ROM, and flash the kernel. I can get you links for that if you want. If you want a custom ROM, you'll have to also flash the SuperSU Beta file and the correct modules for either the OC3 or OC4 kernel, which isn't difficult. I can get you links if you want to go ahead with either of those, if you want a custom ROM though you'll have to pick one out yourself.
Click to expand...
Click to collapse
I ran into this => http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Will it do the job for me? Seems easier than what you described - But i still dont get step number 7. How do i do that Odin's PDA/AP thing?
If you dont wanna be bothered with what i just asked, continue with your own method, if its safer.

Sooo, umm anyone else there in the community, knows how to do this and walk me through?
Pliz.

TheJuli said:
I ran into this => http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Will it do the job for me? Seems easier than what you described - But i still dont get step number 7. How do i do that Odin's PDA/AP thing?
If you dont wanna be bothered with what i just asked, continue with your own method, if its safer.
Click to expand...
Click to collapse
TheJuli said:
Sooo, umm anyone else there in the community, knows how to do this and walk me through?
Pliz.
Click to expand...
Click to collapse
muniz_ri's thread that you linked is the preferred method for someone in your situation to accomplish what you want to do. The instructions are all there. Read through the instructions several times until it makes sense to you. If there is something you don't understand, ask specific questions. It is better (for you) if we don't hold your hand and walk you through everything, because you will learn more if you do it yourself.

Regarding: "Is it worth it?"
It's personal preference. I find the ui improvements in 5.0.1 not great...they are minor or in some cases they seem like down grades.
But I do find the phone noticeably snappier and faster in most tasks. I've had no glitches or fc in the week since I upgraded (I think most of the people complaining about problems about 5.0.1 took the ota without doing a reset) And you'll have the latest security updates also.
If you do upgrade, you have choice of odexed stock or deodexed stock. I'd recommend deodexed if you think you might want to use xposed in the future.

Installed it

In my experience 5.0.1, with its huge constant 1GB Ram usage (without apps or bloatware running and grenify too), was pretty meh. The design of things looks good and all but i personaly think that kitkat did it better RAM wise (Constantly on 500MB), and for that reason, I switched back. I did not experince any snappier or faster performance but i would say it was the same. All in all, if you want flashy and a good looking android phone without loss of performance, but only 800MB free RAM, go for it.
The only thing i learnt from all of this was, how android stuff actually works. So much searching of things lead me to learning more and more. Never had i ever used odin or flashed any firmware. This whole proccess went with some fright within me, but as long as you follow the steps correctly, there is nothing you should be afraid of.