Hi, i had a Galaxy S4 I337M and try to run a new ROM. Now i can't enter in recovery mode and the phone don't turn on. The only way it turn on is connected to my computer and enter in download mode. I run odin but it dont work and fail to run the PIT file.
Is my phone hard-bricked?
How can i restore it? i follow the other instructions but nothing .....
gabpro said:
Hi, i had a Galaxy S4 I337M and try to run a new ROM. Now i can't enter in recovery mode and the phone don't turn on. The only way it turn on is connected to my computer and enter in download mode. I run odin but it dont work and fail to run the PIT file.
Is my phone hard-bricked?
How can i restore it? i follow the other instructions but nothing .....
Click to expand...
Click to collapse
tried a stock rom file from sammobile? the stock for YOUR phone.
Related
Hi, i'm new here and i need help urgent. I want to root my Samsung Galaxy S4 GT-I9505 Orange (Romania). I do this with Odin 3.09 and i do something wrong because i forgot to intall Kies and driver and now i can't recover it. When i want to recover with Odin just give me a FAIL and i don't know how to recover perfectly with Odin and with Kies don't appear when i click recovery in Tools and he says i don't have firmware updates.
Please i need to recover my phone if someone can say step-by-step to recover it, please, help me. Thanks
NeverDieRo said:
Hi, i'm new here and i need help urgent. I want to root my Samsung Galaxy S4 GT-I9505 Orange (Romania). I do this with Odin 3.09 and i do something wrong because i forgot to intall Kies and driver and now i can't recover it. When i want to recover with Odin just give me a FAIL and i don't know how to recover perfectly with Odin and with Kies don't appear when i click recovery in Tools and he says i don't have firmware updates.
Please i need to recover my phone if someone can say step-by-step to recover it, please, help me. Thanks
Click to expand...
Click to collapse
1. Install Kies and Drivers
2. Unistall Kies, leaving Drivers
3. Install Odin3 V1.85
4. Go to Sammobile.com and download LATEST 4.4.2 firmware package in .Tar format for your country
5. Boot phone into download mode (Volume down + Power)
6. Open Odin
7. Connect phone via USB
8. Load firmware in PDA section of Odin
9. Click START
10. Wait till you see a green PASS appear in Odin.
11. Dance around the room in a joyous jig, whilst waving your arms in the air and screaming "yay, I fixed my phone"
Hello,
I'm new here
My problem started when my CSC got stuck on SEE after trying to go back to stock rom from XEO ROM. My original CSC is XEH. I tried to use KIES to restore it, it flashed to the newest but my CSC hasnt changed. After that I downloaded ROM from a different regoin marked as XSG and I tried to flash it with ODIN but it failed and now I'm stuck with "Firmware upgrade encountered an issue.." screen. All roms are Official. My download mode shows Secure Download: Enabled. Did I brick my phone?
Sorry for my not so perfect english
My mode is N910C with Exynos
TrueMorph said:
Hello,
I'm new here
My problem started when my CSC got stuck on SEE after trying to go back to stock rom from XEO ROM. My original CSC is XEH. I tried to use KIES to restore it, it flashed to the newest but my CSC hasnt changed. After that I downloaded ROM from a different regoin marked as XSG and I tried to flash it with ODIN but it failed and now I'm stuck with "Firmware upgrade encountered an issue.." screen. All roms are Official. My download mode shows Secure Download: Enabled. Did I brick my phone?
Sorry for my not so perfect english
Click to expand...
Click to collapse
did you put your phone in Download mode? did you unzipped the file to get the odin flashable file? go to download mode by pressing and holding volume down+home+power for 3 seconds and then let them go, if phone boots into download mode then its not bricked, you just have to download the file and unzipped, to get the Odin file, then open odin, with the phone on download mode, then click pda, search the unzipped file, and flash it, cheers
yoniinfante said:
did you put your phone in Download mode? did you unzipped the file to get the odin flashable file? go to download mode by pressing and holding volume down+home+power for 3 seconds and then let them go, if phone boots into download mode then its not bricked, you just have to download the file and unzipped, to get the Odin file, then open odin, with the phone on download mode, then click pda, search the unzipped file, and flash it, cheers
Click to expand...
Click to collapse
Yes I did all that and everytime I try to flash my phone I get "FAIL" at the end and the same screen at boot.
TrueMorph said:
Yes I did all that and everytime I try to flash my phone I get "FAIL" at the end and the same screen at boot.
Click to expand...
Click to collapse
whem u connect the phone to the computer and open odin does the :COM square becomes light blue? if not then something is wrong with the connection, cheers:fingers-crossed:
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
The only thing I can successfully do with odin is flash the bootloader. I have the full firmware file, but whenever I try flashing anything but the bootloader, FRP Lock blocks it or it fails in odin. I know the exact reason that the phone is bricked, my OEM Unlock setting in developer settings got turned off and I have a rooted binary, so now whenever it trys to boot up, a little red message shows up in the top left for the first few seconds of boot, then the phone shuts off completely. No other thread provides any solution for my situation. Odin wont flash any firmware and I cant get into TWRP anymore as well. Does anyone know what to do? I have a replacement coming from T Mobile in a few weeks but I want to try and fix this thing.
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
what and where to find scatter file?
Farzad37 said:
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
Click to expand...
Click to collapse
I think this is very helpful to my situation.....but what is a scatter file as oppossed to the stock firmware....and is it something I can extract or get from the stockfirmware.zip? I have a samsung On5 (sm-g550t) thats bricked...thanks in advance!
Farzad37 said:
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
Click to expand...
Click to collapse
That's for mtk devices only, and will probably brick op's device even more
Retry Kies.
In the back of phone under battery look for make name (Sould look like SM-G5xxxx) and S/N
Make copy on windows txt file
Boot phone into Download Mode but dont plug into usb yet.
Open Kies on Windows select tools, then firmware upgrade and initialization. Enter your make click ok then enter your S/N click ok. Plug phone into usb and keep clicking ok untill you see downloading firmware
I tried to root my phone today but after reboot, it got stuck in the boot screen which says "Samsung Galaxy 8+". I can only go to the download mode. I tried downloading the stock firmware and tried to flash it using Odin but the flash always fails to give a Fail! (DeviceInfo) error.
I don't know what to do. I am afraid the phone is not charging as well, it the battery dries out my phone will be dead. What should I do?
Did you try and root the new AQG5 base? Flashing TWRP or CF Auto root will fail if you do so. If this is the case then follow the guide @Nameless provided https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857 and throw him a thanks.
If you didn't do that and Odin still continues to fail when flashing stock you should give Smart Switch a try and go for an emergency recovery. You will need your device model number and S/N code ready. http://www.samsung.com/dk/smart-switch/
i have the equal problem my s8 stay in boot screen and in odin fail stock firmware! plz help me TT i can go the download mode but cant flash stock rom with odin