Fisrt, sorry my poor English ^^!
i had a mistake in flashing rom for my defy (green lens) not plus
I flashed Stock SBF of Defy+ to my phone by RSD lite (so stupid ~.~!)
And now
1. Although I do whatever, the camera is not working (MS2Ginger2.1, CM7 nightly, greenbreadmod ...)
2. Although I do whatever, i can't downgrade to 2.2 stock: tried do nandroid restore + fixed SBF or flashing any SBF 2.2 stock by RSD lite => resulting: black screen + white LED => can not go into Stock recovery and bootloader can not be seen, but RSD lite can detect my phone => i redo my stupid work: flash Stock SBF of Defy+, root and install 2ndinit is ok ~.~!
please help me! i need camera work, status ofmy phone: version 2.3.6, MB526, slightly lag, camera not working (camera.apk, 360camera, LGcamera ...) so boring and tired.
i'm noob in English so please explain simple, understandable ^^ thanks so much
that`s exactly what i faced since 10 days...the problem is the stubborn build 2.3.6 which never allows u to install any different build...!! i think it`s a trap ..motorola itself ignored many Emails from me to solve this problem..
Make sure you delete Data and Cache
Don't flash a nightly of Cyanogenmod. Instead, flash the stable release - http://www.multiupload.com/AIWXM5HJWY
then flash the stable kernel - http://defy.wdscript.fr/kernel/CM7_Kernel-signed.zip
I'm not sure I understand all of your post, which makes it difficult to help!
ahmedelhoseney said:
that`s exactly what i faced since 10 days...the problem is the stubborn build 2.3.6 which never allows u to install any different build...!! i think it`s a trap ..motorola itself ignored many Emails from me to solve this problem..
Click to expand...
Click to collapse
you still haven't solved it
Percz said:
Make sure you delete Data and Cache
Don't flash a nightly of Cyanogenmod. Instead, flash the stable release - .multiupload.com/AIWXM5HJWY
then flash the stable kernel - defy.wdscript.fr/kernel/CM7_Kernel-signed.zip
I'm not sure I understand all of your post, which makes it difficult to help!
Click to expand...
Click to collapse
I did it, flash that stable release.
in custom recovery:
Finding update package ...
opening update package ...
verfying update package ...
E: Can't make /tmp/update_binary
Intallation aborted.
in Stock recovery:
Finding update package ...
opening update package ...
verfying update package ...
E: failed to verify whole-file signature
E: signature verifycation failed
Intallation aborted.
somebody help me T.T!!!!
Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks
vaibhavm said:
Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks
Click to expand...
Click to collapse
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully.... Im a noob to this flashing stuff still managed and understood a bit of this procedure... I believe I read this some where on this forum that if you want to install ***cm11 (cm-11-20140117-NIGHTLY-mb526)*** then you need to go back to the custom rom first then from there you can install , though I'm not 100% Sure and afraid to do any experimentation with my Defy+.... As of now Im on
"Android 4.3.1"
Kernel 2.6.32.9-Aerokernel
10.2-20131030-NIGHTLY-mb526
I am facing almost the same problems as yours "Installation failed" as if there is a problem with the zip file which I'm sure of that isnt the case :/
Please somebody help the noobs...!!!
Thank you.
imdroid87 said:
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully....
Thank you.
Click to expand...
Click to collapse
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036
becer said:
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036
Click to expand...
Click to collapse
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"
imdroid87 said:
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"
Click to expand...
Click to collapse
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
becer said:
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
Click to expand...
Click to collapse
Buddy "becer" can u please guide me step wise to go back to the Stock Rom then 2init what ever it is I dont understand a thing
I know what stock Rom is but don't know how to degrade to the stock rom from 4.3.1 and how to install this 2init thing
would be a great help if you could guide me through the procedure step wise
Thank You.
1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk
cyrusct82 said:
1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Buddy Im already running cyanogenmod on my defy+ and in the second link what you gave for installing the 2ndinit Recovery it says:
DO NOT INSTALL THIS IF ARE YOU ALREADY RUNNING CYANOGENMOD. That ROM already has bootmenu pre-installed, and you'll probably end up having to flash an SBF file to recover your phone.
NOTE: You need ROOT installed on your Defy to use this application.
What should I do ???
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .
vaibhavm said:
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .
Click to expand...
Click to collapse
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:
imdroid87 said:
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:
Click to expand...
Click to collapse
Mine sbf is rooted alredy so maybe try it first then go to CM10 .
its DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
downloaded it earlier from here only.
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.
becer said:
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.
Click to expand...
Click to collapse
Im phone is f***** , what I did is install this framaroot and installed rootchecker..... I tried to do the rooting using "installsu" and then clicked Gilmo and it gave me this message:
“Half-Success :-/ … system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it runs as root”
then I restarted my phone and check with root checker and found its saying its saying Root access successful and then I wondered which I suppose I shudnt have wondered :crying: to user framaroot and do the "unroot" and again restarted , and now after restart I tried to do the regular thing wipe cache ,Dalvik , Data and the phone is not even mounting them its sayin
E: Can't mount /cache/recovery/command etc
Im able to open the android 4.1.2 (Jb - quarx)
but not able to install a thing in my internal memory coz I messed up bad with the partition table bad:crying:
I tried to fix it through this
http://forum.xda-developers.com/showthread.php?t=1759558&highlight=status+0
but no luck :/
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
For the opening post: the first issue is a known bug in 4.4, I did not know it is wrong even in 4.1...
vaibhavm said:
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
Click to expand...
Click to collapse
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:
imdroid87 said:
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:
Click to expand...
Click to collapse
vaibhavm I have installed this 4.4.2 Android Panroid
http://forum.xda-developers.com/showthread.php?t=2576930
[AOSPA 4.4.2 KOT49H] [Beta] Defy(+) PARANOIDANDROID 4.0+ [18/01/2014]
Working awesome fast and seems stable until now and I have gone through some reviews about it on defy+ on that forum even they are giving it positive reviews..
Check it out for sure:good::fingers-crossed:
I want to install Jelly Bean on Motorola Defy+...
I had earlier installed it with this zip cm-10.2-20130917-NIGHTLY-mb526...
But since I tried to install kit kat on it which I m not able to....
So, I began from start
1. installed DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf than,
2. installed firmwaresbf to root it. Rooted Saw Superuser In Menu. Than,
3.insatlled CyanogenDefy Recovery v5.0.3.1-jordan recovery. than
4.Try to install cm-10.2-20130917-NIGHTLY-mb526. by going in custom recovery But now I got this Error
Installing Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
5. Also want to install Team win recovery Project....
One More thing this is a same Zip from which I installed Jelly Bean on Defy+.... I haven't deleted it... so it Can't be corrupted I think so...
Please HELP.
Provide me your valuable assistance...
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
can u post a link of the forum that can explain.....
pgreed said:
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
Click to expand...
Click to collapse
can u post a link of the forum that can explain.....that will be very helpful
&
Thanks for Answering...
Pls Help....
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
defynoob said:
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
Click to expand...
Click to collapse
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
still Help Needed
pgreed said:
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
Click to expand...
Click to collapse
Try to install this with recovery but still getting same error cm-11-20131229-NIGHTLY-mb526.zip
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
Pls Help Me
no one there to HELP!
What happen is there no one who can provide any HELP to me...
As I want it much...
Pls Help Me...
thanks in advance..
I have the same problem now with my new Defy+.I had 2 Defys+ in past and just root and install 2init then instal .zip CM9 or CM10 and love it.Now I go to kill myself.From more than week I flash,install,reboot,reflash....and have no fully working Cm10.First I have no way to install newer than cm10.0!Any try with 10.1 or 10.2 is folow ERROR in the beginning and nothing more.My custom recovery now is CWM.Any try to update recovery or try with TWRP,or try dual recovery or,or...is going to boot loop or sot brick...Now Im on CM10/Android 4.1.2 and try to get telephony functions.Im in Bulgaria and before with previous Defys I use baseband switch to 342-145.Now just after install new ROM(CM10) telephony worked first couple of minutes,not more.After dialing it come to black screen or in normal incall screen but no voice from bot sides.I switch to other bands but nothing.It come to pissed me out.Please help
I go directly to CM11, it is much stable now.
Not able to install TWRP
Not able to install TWRP Tried by installing it from CyanogenDefy Recovery v5.0.3.1-jordan recovery and it says installed successfully from SD card but not able to boot in team win recovery project and therefore not able to install any CM version Yet
trying n getting nstalling Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip or any other cm version
(Status 0)
Installation aborted.
Need help pls help me...:crying:
hello friend, I'm from Peru, I am new to the world of roms customs, come from Xperia D 4.9 and is a little lag and unstable the kitkat, I have decided to install Cm 11, but when flashing with TWRP + update recovery, excellent installation, but I bootsloop with TWRP THROUGH file manager I've realized not to flash / system? . I hope you help me. Thank you.
Trying to install cm-11-20140327-NIGHTLY-mb526 from http://forum.xda-developers.com/showthread.php?t=2515036
But getting update error 7, this package is for mb526 devices this is a "."
My devise is a mb526. Tried editing updater-script and removing assert function but it didn't help.
Currently I'm running Android 4.1.2 ROM: CyanogenMod-10-121024-UNOFFICIAL-Defy+
ROM manger v5.5.3.7
boldtaar said:
Trying to install cm-11-20140327-NIGHTLY-mb526 from http://forum.xda-developers.com/showthread.php?t=2515036
But getting update error 7, this package is for mb526 devices this is a "."
My devise is a mb526. Tried editing updater-script and removing assert function but it didn't help.
Currently I'm running Android 4.1.2 ROM: CyanogenMod-10-121024-UNOFFICIAL-Defy+
ROM manger v5.5.3.7
Click to expand...
Click to collapse
I am not sure but i think your problem might be something like this.
Look in first post of Quarx original CM11 defy thread .. probably what you missed is to first install the update-recovery.zip (updated to be compatble with CM11 install) and then to download CM11 zip manually onto your device, then reboot into your newly updated TWRP ..
also first boot without gapps.. configure device, then reboot and install gapps minmal by banks linked in Quarx post.